Construction of Multi-storeyed Quarters Type-IV (28 units) & Ty-V (21 units) including Electrical and Telecom work at Civil Lines Nagpur.

1-CPWD DSR 2023 Part-I Type IV

2-CPWD HORTICULTURE 2020 Part-I Type IV

3-NS ITEM Part-I Type IV

4-CPWD DSR 2023 Part-2 Type V

5-DSR 2020 HORTICULTURE & LANDSCAPING

6-NS Items Part-2 Type V

7-NS ITEM - Part-1 Type IV, Electrical works

8-NS ITEM - Part-2 Type V, Electrical works

9-SOR A Supply Ty-IV Quarters

10-SOR B Execution Supply Ty-IV Quarters

11-NS Items Ty-IV Quarters

12-SOR A Supply Ty-V Quarters

13-SOR B Execution Supply Ty-V Quarters

14-NS Items Ty-V Quarters

Item Breakup - 1-CPWD DSR 2023 Part-I Type IV

nuts complete. Providing and fixing chromium plated brass 9.92 handles with necessary screws etc. complete: 39 9.92.1 125 mm Each 525 231.05 121301.25 ANODISED ALUMINIUM FITTINGS (ALL 9.95S FITTINGS SHALL BE ISI MARKED) Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating 9.96 not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 40 9.96.1 300x16 mm Each 370 303.25 112202.5 9.105S GYPSUM BOARD PARTITIONS 9.112 Providing and fixing 2nd class teak wood Metre 650 102.15 66397.5 lipping/ moulded beading or taj beading of size 18X5 mm fixed with wooden adhesive of 41 approved quality and screws/nails on the edges of the Pre-laminated particle board as per direction of Engineer-in-charge. Providing and fixing magnetic catcher of approved quality in cupboard / ward robe 9.114 shutters, including fixing with necessary screws etc. complete. 42 9.114.1 Triple strip vertical type Each 950 52.5 49875 9.115 Providing and fixing powder coated ONE 475 414.2 196745 telescopic drawer channels 300 mm long SET 43 with necessary screws etc. complete as per directions of Engineer- in-charge. 9.116 Providing and fixing sliding arrangement in Each 475 20.4 9690 racks/ cupboards/cabinets shutter by with 44 stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately) 9.119 Providing and fixing factory made P.V.C. Metre 768 492.7 378393.6 door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced 45 with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer's specification and direction of Engineer- in-Charge. DYCE-C-NGP-ENGINEERING/CENTRAL RLY Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 9.120 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, panelling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing. 46 9.120.1 30 mm thick plain PVC door shutters Sqm 264 3182.95 840298.8 Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density 9.127 protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 47 9.127.2 1.0 mm thick Sqm 615 897.3 551839.5 9.132 Providing and fixing aluminium U beading of Kg 90 596.15 53653.5 required size to Pre-laminated/flush door 48 shutter, including fixing etc. complete as per direction of Engineer-in-charge. 9.167 Providing and fixing 6mm thick both sides Sqm 850 1010.6 859010 Pre-laminated cement bonded wood particle board as per IS : 15786:2008 of approved brand and shade with suitable full threaded 49 steel screws etc. on the backing of racks, drawer, cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of Engineer-in-charge. 9.168 Providing and fixing cupboard shutter with Sqm 850 2829.25 2404862.5 19 mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2 mm thick PVC 50 edge banding tape with hot glue by edge bending machine etc. with auto closing spring loaded hinges (hydraulic type) etc. complete as per direction of Engineer-in- charge.(Payment of providing and fixing auto closing hinges shall be paid separately) DYCE-C-NGP-ENGINEERING/CENTRAL RLY 9.169 Providing and fixing 19 mm thick both side Sqm 1900 2593.15 4926985 balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved 51 brand boxes, shelves, racks, almirah, cupboard and drawer etc. including necessary nails, screws etc. complete as per direction of Engineer-in-charge. Providing and fixing stainless steel fancy handle of approved make fixed with SS 9.170 screws etc. complete as per direction of Engineer-in-charge. 52 9.170.1 200 mm Each 375 186.65 69993.75 9.171 Providing and fixing stainless steel soft Each 1300 272 353600 closing spring hinges at 0 degree hinges (hydraulic type) of approved make/brand to 53 cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-in-charge. 9.172 Providing and fixing stainless steel soft ONE 380 885.1 336338 closing heavy type telescopic drawer SET 54 channels of approved make 500 mm long with screws etc. complete as per directions of Engineer- in-charge. 9.173 Providing and fixing ready made 304 grade Kg 2350 533.25 1253137.5 stainless steel Modular kitchen basket and accessories such as right angle basket (Plain Cup & Saucer, plant, Partition, Bottle rack, Thali, Cutlery) kitchen utensil basket, Dinner set basket, kitchen grain basket, Multipurpose basket as per site requirement including finishing (wherever required) and fittings. The same shall be fixed with 55 necessary stainless steel nuts & bolts, Stainless Steel screws & telescopic channel etc. as per direction of Engineer-in-charge. (For payment purpose only weight of Stainless steel basket shall be considered excluding weight of all fixing accessories such as nuts, bolts, fasteners telescopic basket channels etc. Payment of providing and fixing telescopic channel shall be paid separately) 9.174 Providing and fixing 2 mm thick 16 to 19 mm Metre 550 43.8 24090 wide PVC edge binding tape of approved quality for cupboard/wardrobe shutters 56 including necessary synthetic resin hot pressed to edges on binding machine etc. complete as per directions of Engineer- in- charge. 10.0 STEEL WORK 10.1S General 10.2 Structural steel work riveted, bolted or Kg 19360 133.7 2588432 welded in built up sections, trusses and 57 framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in 10.16 position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 58 10.16.1 Hot finished welded type tubes Kg 9050 194.4 1759320 DYCE-C-NGP-ENGINEERING/CENTRAL RLY 10.18 Providing and fixing circular/ Hexagonal cast Each 360 220.65 79434 iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid 59 shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing. 10.19 Providing and fixing mild steel round holding Kg 360 97.2 34992 60 down bolts with nuts and washer plates complete. 10.28 Providing and fixing stainless steel ( Grade Kg 840 772.4 648816 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash 61 fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). 11.0 FLOORING 11.16S TILE FLOORING Chequered precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment 11.20 to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). 62 11.20.3 Dark shade pigment using ordinary cement Sqm 72 1119.5 80604 11.37S CERAMIC GLAZED TILES 11.37 Providing and laying Ceramic glazed floor Sqm 408 1096.55 447392.4 tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume 63 Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. 11.41S VITRIFIED FLOOR TILES Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 11.41A kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. DYCE-C-NGP-ENGINEERING/CENTRAL RLY Glazed vitrified floor tiles polished finish of 11.41A.2 size 64 11.41A.2.2 Size of Tile 600 x 1200 mm Sqm 2685 1798.8 4829778 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement 11.56 mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 11.56.2 Polished Granite stone slab of all colour and Sqm 480 3071.05 1474104 65 texture except Black, Cherry/Ruby Red 12.0 ROOFING 12.37S RAIN WATER SPOUT AND PIPE Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including 12.41 jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 66 12.41.1 75 mm diameter Metre 1020 248.8 253776 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain 12.42 water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 12.42.1 Coupler 67 12.42.1.1 75 mm Each 96 91.7 8803.2 12.42.3 Single tee with door 68 12.42.3.1 75x75x75 mm Each 48 164.2 7881.6 12.42.6 Shoe (Plain) 69 12.42.6.1 75 mm Shoe Each 48 93.1 4468.8 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. 12.43 screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 70 12.43.1 75 mm Each 360 369.85 133146 12.44 Providing and fixing to the inlet mouth of Each 48 54.7 2625.6 rain water pipe cast iron grating 15 cm 71 diameter and weighing not less than 440 grams. DYCE-C-NGP-ENGINEERING/CENTRAL RLY Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long 12.45 G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.45.1 12.5 mm thick tapered edge gypsum plain Sqm 2310 1355.8 3131898 72 board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8 mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovings incorporating 12.47 minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 73 12.47.2 2 mm thick flat Sqm 735 1245.65 915552.75 DYCE-C-NGP-ENGINEERING/CENTRAL RLY 12.50 Providing and fixing precoated galvanised Sqm 480 738.65 354552 iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in- charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet 74 should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with Zinc 12.51 coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : 75 12.51.1 Ridges plain (500 - 600mm) Metre 240 532.35 127764 13.0 FINISHING 13.1S CEMENT PLASTER (IN FINE SAND) 13.1 12 mm cement plaster of mix : 76 13.1.1 1:4 (1 cement: 4 fine sand) Sqm 17850 347.05 6194842.5 15 mm cement plaster on the rough side of 13.2 single or half brick wall of mix : 77 13.2.1 1:4 (1 cement: 4 fine sand) Sqm 5460 399.45 2180997 13.20S PEBBLE DASH PLASTER 13.26 Providing and applying plaster of paris putty Sqm 17850 262.7 4689195 of 2 mm thickness over plastered surface to 78 prepare the surface even and smooth complete. 13.44S EXTERIOR FINISHING Finishing with Deluxe Multi surface paint 13.48 system for interiors and exteriors using Primer as per manufacturers specifications : 13.48.1 Two or more coats applied on walls @ 1.25 Sqm 28000 193.7 5423600 79 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm 13.48.2 Painting wood work with Deluxe Multi Sqm 1080 176.25 190350 Surface Paint of required shade. Two or 80 more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture 13.48.3 Painting Steel work with Deluxe Multi Sqm 4320 170.7 737424 Surface Paint to give an even shade. Two or 81 more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture Finishing with Epoxy paint (two or more coats) at all locations prepared and applied 13.52 as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. 82 13.52.1 On steel work Sqm 960 241.75 232080 DYCE-C-NGP-ENGINEERING/CENTRAL RLY 13.114 Melamine polishing on wood work (one or Sqm 1200 138.1 165720 83 more coat). 15.0 DISMANTLING AND DEMOLISHING 15.1S General Demolishing cement concrete manually/ by mechanical means including disposal of 15.2 material within 50 metres lead as per direction of Engineer - in - charge. 15.2.1 Nominal concrete 1:3:6 or richer mix cum 110 2434.25 267767.5 84 (including equivalent design mix) Demolishing brick work manually/ by mechanical means including stacking of 15.7 serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. 85 15.7.4 In cement mortar cum 100 2060.2 206020 Taking out doors, windows and clerestory 15.13 window shutters (steel or wood) including stacking within 50 metres lead : 86 15.13.1 Of area 3 sq. metres and below Each 68 143.5 9758 Dismantling steel work in single sections 15.17 including dismembering and stacking within 50 metres lead in: 87 15.17.1 R.S. Joists Kg 936 3.4 3182.4 88 15.17.2 Channels, angles, tees and flats Kg 1080 2.3 2484 Dismantling tile work in floors and roofs laid 15.23 in cement mortar including stacking material within 50 metres lead. 89 15.23.1 For thickness of tiles 10 mm to 25 mm Sqm 360 73.4 26424 Dismantling roofing including ridges, hips, 15.28 valleys and gutters etc., and stacking the material within 50 metres lead of: 90 15.28.1 G.S. Sheet Sqm 480 164.95 79176 91 15.28.2 Asbestos Cement sheet Sqm 480 77.3 37104 15.52 Dismantling of flushing cistern of all types Each 5 112.05 560.25 (C.I./PVC/Vitreous China) including stacking 92 of useful materials near the site and disposal of unserviceable materials within 50 metres lead. 15.60 Disposal of building rubbish / malba / similar cum 360 263.95 95022 unserviceable, dismantled or waste materials by mechanical means, including 93 loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. 16.0 ROAD WORK 16.1S ROADS 16.1 Preparation and consolidation of sub grade Sqm 576 218.9 126086.4 with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to 94 camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres. 16.15S FENCING 16.15 Supplying at site : DYCE-C-NGP-ENGINEERING/CENTRAL RLY 16.15.1 R.C.C. Standards post/ struts/rails/ pales of cum 3.6 32891.2 118408.32 mix 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 12.5 mm nominal size) with wooden plugs or 6mm bar nibs 95 wherever required as per direction of Engineer-in- charge (cost of earth works in excavation, concrete works in foundation to be paid separately). Fencing with R.C.C. post placed at required distance, embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post one side only, provided with horizontal lines and two diagonals of barbed wire weighing 9.38 kg 16.17 per 100 metres (minimum), between the two posts fitted and fixed with G.I. staples on wooden plugs or G.I. binding wire tied to 6 mm bar nibs fixed while casting the post (cost of R.C.C. posts, struts, earth work and concrete to be paid for separately) :- Payment to be made per metre cost of total length of barbed wire used. 96 16.17.1 With G.I. barbed wire Metre 2040 14 28560 16.42S CONCRETE PAVEMENTS Providing and laying design mix cement concrete of M-30 grade, in roads/taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved and specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ 16.43 camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction and longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer-in-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately). 16.43.2 Cement concrete manufactured in automatic cum 126 11098.45 1398404.7 97 batching plant (RMC plant) including transportation to site in transit mixer 16.45 Providing and fixing pre-moulded joint filler per cm 648 5.3 3434.4 in expansion joints of RCC roads / CC depth pavements after making the joints dust free per cm with high pressure air jet cleaners, all width complete as per direction of the Engineer-in- per 98 Charge. (Pre-moulded joint fillers shall be metre made of bitumen hot sealing compound length impregnated fibre board having impregnation more than 35%, conforming to IS:1838 for fibre board and IS: 1834 for hot sealing bitumen compound grade A.) Providing and filling in position rubberized bitumen hot sealing compound for sealing of 16.46 expansion joints in roads / pavements all complete as per direction of the Engineer-in- Charge. DYCE-C-NGP-ENGINEERING/CENTRAL RLY 16.46.1 per cm 744 8.65 6435.6 Providing and filling in position rubberized depth bitumen hot sealing compound for sealing of per cm 99 expansion joints in roads / pavements all width complete as per direction of the Engineer-in- per Charge. metre length 16.49S MISCELLANEOUS 16.62 Providing and applying 2.5 mm thick road Sqm 192 747.8 143577.6 marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile 100 shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer- in-charge and accordance with applicable specifications. 16.68 Providing and laying 60mm thick factory Sqm 120 972 116640 made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in 101 required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. 16.69 Providing and laying at or near ground level cum 48 10117.6 485644.8 factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except 102 at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured to calculate volume for payment). (Precast C.C. kerb stone shall be approved by Engineer-in- charge). 16.89 Providing and laying matt finished vitrified Sqm 720 1455.65 1048068 tile of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals 103 location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. 17.0 SANITARY INSTALLATIONS 17.1S General DYCE-C-NGP-ENGINEERING/CENTRAL RLY Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush 17.1 pipe, with manually controlled device (handle lever) conforming to IS : 7231,with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 17.1.1 White Vitreous china Orissa pattern W.C. pan Each 10 6767.4 67674 104 of size 580x440 mm with integral type foot rests Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm 17.3 flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 17.3.1 W.C. pan with ISI marked white solid plastic Each 84 8006.6 672554.4 105 seat and lid Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, 17.7 including painting of fittings and brackets, cutting and making good the walls wherever require: 17.7.1 White Vitreous China Wash basin size Each 84 2648.85 222503.4 106 630x450 mm with a pair of 15 mm C.P. brass pillar taps 17.16A Providing and fixing 8 mm dia C.P. / S.S. Jet Each 84 349.15 29328.6 with flexible tube upto 1 metre long with S.S. 107 triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge. Providing and fixing P.V.C. waste pipe for 17.28 sink or wash basin including P.V.C. waste fittings complete. 17.28.1 Semi rigid pipe 108 17.28.1.1 32 mm dia Each 84 103.9 8727.6 17.28.2 Flexible pipe 109 17.28.2.1 32 mm dia Each 84 119.55 10042.2 17.31 Providing and fixing 600x450 mm bevelled Each 84 1607.95 135067.8 edge mirror of superior glass (of approved 110 quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Providing and fixing mirror of superior glass (of approved quality) and of required shape 17.32 and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : 111 17.32.4 Rectangular shape 1500x450 mm Each 42 2093 87906 17.33 Providing and fixing 600x120x5 mm glass Each 84 1083.5 91014 shelf with edges round off, supported on anodised aluminium angle frame with C.P. 112 brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. 17.34 Providing and fixing toilet paper holder : 113 17.34.1 C.P. brass Each 84 803.7 67510.8 18.0 WATER SUPPLY DYCE-C-NGP-ENGINEERING/CENTRAL RLY 18.7S C.P.V.C. PIPES Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of 18.8 pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 114 18.8.2 20 mm nominal dia Pipes Metre 2280 537.6 1225728 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This 18.9 includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 115 18.9.3 25 mm nominal dia Pipes Metre 1080 355.4 383832 116 18.9.6 50 mm nominal dia Pipes Metre 300 794.25 238275 18.15S BRASS FITTINGS Providing and fixing ball valve (brass) of 18.18 approved quality, High or low pressure, with plastic floats complete : 117 18.18.3 25 mm nominal bore Each 16 464.05 7424.8 C.I. SLUICE VALVES/ FIRE HYDRANTS & 18.31S FIXTURES 18.48 Providing and placing on terrace (at all floor Per 43200 11 475200 levels) polyethylene water storage tank, IS : Litre 12701 marked, with cover and suitable 118 locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 18.49S C.P. BRASS FITTINGS Providing and fixing C.P. brass bib cock of 18.49 approved quality conforming to IS:8931 : 119 18.49.1 15 mm nominal bore Each 108 506.8 54734.4 Providing and fixing C.P. brass angle valve 18.53 for basin mixer and geyser points of approved quality conforming to IS:8931 120 18.53.1 15mm nominal bore Each 84 574.3 48241.2 19.0 DRAINAGE 19.1S STONE WARE PIPES AND FITTINGS Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture 19.1 of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 121 19.1.3 200 mm diameter Metre 500 970.35 485175 122 19.1.5 300 mm diameter Metre 420 2064.15 866943 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand :10 graded stone 19.3 aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design : 123 19.3.5 300 mm diameter S.W. pipe Metre 360 1173.35 422406 DYCE-C-NGP-ENGINEERING/CENTRAL RLY Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. 19.4 cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 19.4.2 150 x 100 mm size P type 19.4.2.1 With common burnt clay F.P.S. (non Each 36 2734.2 98431.2 124 modular) bricks of class designation 7.5 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size),foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), 19.7 inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total 19.7.1 weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : 19.7.1.1 With common burnt clay F.P.S. (non Each 48 12770.55 612986.4 125 modular) bricks of class designation 7.5 Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 19.21 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : 126 19.21.1 For pipes 100 to 250 mm diameter Each 36 810.45 29176.2 Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of 19.35 cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete 127 19.35.1 450 mm dia RCC pipes. Metre 189 2676.55 505867.95 21.0 ALUMINIUM WORK 21.1S General DYCE-C-NGP-ENGINEERING/CENTRAL RLY Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM 21.1 rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion 21.1.1.2 Powder coated aluminium (minimum Kg 1320 530.9 700788 128 thickness of powder coating 50 micron) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings 21.1.2 wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2.2 Powder coated aluminium (minimum Kg 2520 634.45 1598814 129 thickness of powder coating 50 micron) Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene 21.3 gasket etc. complete as per the architectural drawings and the directions of engineer-in- charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.2 With float glass panes of 5 mm thickness Sqm 820 1505.25 1234305 130 (weight not less than 12.50 kg/sqm) Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU 21.19 sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete, complying to ASTM C920, DIN 18540-F & ISO 11600 131 21.19.1 Upto 5 mm depth and 5 mm width Metre 600 148.1 88860 22.0 WATER PROOFING 22.1S General DYCE-C-NGP-ENGINEERING/CENTRAL RLY 22.6 Providing and laying water proofing Sqm 696 688.9 479474.4 treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying:(a) after surface preparation, first layer of slurry of cement @ 0.488kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than10 cm. (c) third layer of 1.5 mm thickness 132 consisting of slurry of cement @1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured. 23.0 RAIN WATER HARVESTING & TUBEWELLS 23.1S General Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore 23.1 log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level. 23.1.1 All types of soil 133 23.1.1.1 300 mm dia Metre 72 707.75 50958 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, 23.3 including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in- charge. 134 23.3.3 200 mm nominal size dia Metre 72 1113.35 80161.2 Providing and fixing suitable size threaded mild steel cap or spot welded plate to the 23.13 top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 135 23.13.3 200 mm dia Each 2 321.15 642.3 26.0 NEW TECHNOLOGIES AND MATERIALS 26.73S PREFAB/PRECAST TECHNOLOGY DYCE-C-NGP-ENGINEERING/CENTRAL RLY 26.81 Providing and fixing Scaffolding net of Sqm 12000 29.25 351000 required width made of high density Polyethylene UV stabilized knitted on warp knitting machines having density 100 grams / sqm and shading coefficient minimum 75% around the construction site/ for vertical extension as per requirement including fastening/tying with building/scaffolding 136 pipes or with any other fixtures etc. complete as per direction of Engineer-in- Charge. (One time payment shall be made for providing Scaffolding net from start of work till completion of work including shifting if any. The Scaffolding net shall be the property of the contractor on completion of the work) Total 175887962.37

Item Breakup - 2-CPWD HORTICULTURE 2020 Part-I Type IV

Plastic Pot as per direction of the officer-in- charge. 6.0 GROUND COVERS PLANTS 6.9 Providing and stacking of Chlorophytum- Each 240 20 4800 variegated, full of leafy suckers in 15 cm size 12 of Earthen Pot/Plastic Pot & a s per direction of the officer-in-charge. 6.12 Providing and stacking of Duranta Golden, Each 60 20 1200 having ht.15 to 20 cm bushty shape with 13 fresh and healthy leaves in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge. Total 520803.30

Item Breakup - 4-CPWD DSR 2023 Part-2 Type V

nuts complete. Providing and fixing chromium plated brass 9.92 handles with necessary screws etc. complete: 39 9.92.1 125 mm Each 420 231.05 97041 ANODISED ALUMINIUM FITTINGS (ALL 9.95S FITTINGS SHALL BE ISI MARKED) Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating 9.96 not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 40 9.96.1 300x16 mm Each 210 303.25 63682.5 9.105S GYPSUM BOARD PARTITIONS 9.112 Providing and fixing 2nd class teak wood Metre 350 102.15 35752.5 lipping/ moulded beading or taj beading of size 18X5 mm fixed with wooden adhesive of 41 approved quality and screws/nails on the edges of the Pre-laminated particle board as per direction of Engineer-in-charge. Providing and fixing magnetic catcher of approved quality in cupboard / ward robe 9.114 shutters, including fixing with necessary screws etc. complete. 42 9.114.1 Triple strip vertical type Each 630 52.5 33075 9.115 Providing and fixing powder coated ONE 315 414.2 130473 telescopic drawer channels 300 mm long SET 43 with necessary screws etc. complete as per directions of Engineer- in-charge. DYCE-C-NGP-ENGINEERING/CENTRAL RLY 9.116 Providing and fixing sliding arrangement in Each 315 20.4 6426 racks/ cupboards/cabinets shutter by with 44 stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately) 9.119 Providing and fixing factory made P.V.C. Metre 876 492.7 431605.2 door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced 45 with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer's specification and direction of Engineer- in-Charge. Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 9.120 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, panelling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing. 46 9.120.1 30 mm thick plain PVC door shutters Sqm 282 3182.95 897591.9 Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density 9.127 protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 47 9.127.2 1.0 mm thick Sqm 410 897.3 367893 9.132 Providing and fixing aluminium U beading of Kg 60 596.15 35769 required size to Pre-laminated/flush door 48 shutter, including fixing etc. complete as per direction of Engineer-in-charge. DYCE-C-NGP-ENGINEERING/CENTRAL RLY 9.167 Providing and fixing 6mm thick both sides Sqm 565 1010.6 570989 Pre-laminated cement bonded wood particle board as per IS : 15786:2008 of approved brand and shade with suitable full threaded 49 steel screws etc. on the backing of racks, drawer, cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of Engineer-in-charge. 9.168 Providing and fixing cupboard shutter with Sqm 565 2829.25 1598526.25 19 mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2 mm thick PVC 50 edge banding tape with hot glue by edge bending machine etc. with auto closing spring loaded hinges (hydraulic type) etc. complete as per direction of Engineer-in- charge.(Payment of providing and fixing auto closing hinges shall be paid separately) 9.169 Providing and fixing 19 mm thick both side Sqm 1320 2593.15 3422958 balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved 51 brand boxes, shelves, racks, almirah, cupboard and drawer etc. including necessary nails, screws etc. complete as per direction of Engineer-in-charge. Providing and fixing stainless steel fancy handle of approved make fixed with SS 9.170 screws etc. complete as per direction of Engineer-in-charge. 52 9.170.1 200 mm Each 250 186.65 46662.5 9.171 Providing and fixing stainless steel soft Each 850 272 231200 closing spring hinges at 0 degree hinges (hydraulic type) of approved make/brand to 53 cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-in-charge. 9.172 Providing and fixing stainless steel soft ONE 252 885.1 223045.2 closing heavy type telescopic drawer SET 54 channels of approved make 500 mm long with screws etc. complete as per directions of Engineer- in-charge. 9.173 Providing and fixing ready made 304 grade Kg 1575 533.25 839868.75 stainless steel Modular kitchen basket and accessories such as right angle basket (Plain Cup & Saucer, plant, Partition, Bottle rack, Thali, Cutlery) kitchen utensil basket, Dinner set basket, kitchen grain basket, Multipurpose basket as per site requirement including finishing (wherever required) and fittings. The same shall be fixed with 55 necessary stainless steel nuts & bolts, Stainless Steel screws & telescopic channel etc. as per direction of Engineer-in-charge. (For payment purpose only weight of Stainless steel basket shall be considered excluding weight of all fixing accessories such as nuts, bolts, fasteners telescopic basket channels etc. Payment of providing and fixing telescopic channel shall be paid separately) 9.174 Providing and fixing 2 mm thick 16 to 19 mm Metre 350 43.8 15330 wide PVC edge binding tape of approved quality for cupboard/wardrobe shutters 56 including necessary synthetic resin hot pressed to edges on binding machine etc. complete as per directions of Engineer- in- charge. DYCE-C-NGP-ENGINEERING/CENTRAL RLY 10.0 STEEL WORK 10.1S General 10.2 Structural steel work riveted, bolted or Kg 2400 133.7 320880 welded in built up sections, trusses and 57 framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in 10.16 position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 58 10.16.1 Hot finished welded type tubes Kg 3600 194.4 699840 10.18 Providing and fixing circular/ Hexagonal cast Each 288 220.65 63547.2 iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid 59 shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing. 10.19 Providing and fixing mild steel round holding Kg 180 97.2 17496 60 down bolts with nuts and washer plates complete. 10.28 Providing and fixing stainless steel ( Grade Kg 1140 772.4 880536 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash 61 fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). 11.0 FLOORING 11.16S TILE FLOORING Chequered precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment 11.20 to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). 62 11.20.3 Dark shade pigment using ordinary cement Sqm 192 1119.5 214944 11.37S CERAMIC GLAZED TILES 11.37 Providing and laying Ceramic glazed floor Sqm 504 1096.55 552661.2 tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume 63 Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. 11.41S VITRIFIED FLOOR TILES DYCE-C-NGP-ENGINEERING/CENTRAL RLY Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 11.41A kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed vitrified floor tiles polished finish of 11.41A.2 size 64 11.41A.2.2 Size of Tile 600 x 1200 mm Sqm 3910 1798.8 7033308 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement 11.56 mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 11.56.2 Polished Granite stone slab of all colour and Sqm 540 3071.05 1658367 65 texture except Black, Cherry/Ruby Red 12.0 ROOFING 12.37S RAIN WATER SPOUT AND PIPE Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including 12.41 jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 66 12.41.1 75 mm diameter Metre 480 248.8 119424 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain 12.42 water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 12.42.1 Coupler 67 12.42.1.1 75 mm Each 48 91.7 4401.6 12.42.3 Single tee with door 68 12.42.3.1 75x75x75 mm Each 24 164.2 3940.8 12.42.6 Shoe (Plain) 69 12.42.6.1 75 mm Shoe Each 24 93.1 2234.4 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. 12.43 screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 70 12.43.1 75 mm Each 180 369.85 66573 DYCE-C-NGP-ENGINEERING/CENTRAL RLY 12.44 Providing and fixing to the inlet mouth of Each 24 54.7 1312.8 rain water pipe cast iron grating 15 cm 71 diameter and weighing not less than 440 grams. Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long 12.45 G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.45.1 12.5 mm thick tapered edge gypsum plain Sqm 2760 1355.8 3742008 72 board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) DYCE-C-NGP-ENGINEERING/CENTRAL RLY Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8 mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovings incorporating 12.47 minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 73 12.47.2 2 mm thick flat Sqm 420 1245.65 523173 12.50 Providing and fixing precoated galvanised Sqm 300 738.65 221595 iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in- charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet 74 should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with Zinc 12.51 coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : 75 12.51.1 Ridges plain (500 - 600mm) Metre 120 532.35 63882 13.0 FINISHING 13.1S CEMENT PLASTER (IN FINE SAND) 13.1 12 mm cement plaster of mix : 76 13.1.1 1:4 (1 cement: 4 fine sand) Sqm 18200 347.05 6316310 15 mm cement plaster on the rough side of 13.2 single or half brick wall of mix : 77 13.2.1 1:4 (1 cement: 4 fine sand) Sqm 5460 399.45 2180997 13.20S PEBBLE DASH PLASTER 13.26 Providing and applying plaster of paris putty Sqm 18200 262.7 4781140 of 2 mm thickness over plastered surface to 78 prepare the surface even and smooth complete. 13.44S EXTERIOR FINISHING Finishing with Deluxe Multi surface paint 13.48 system for interiors and exteriors using Primer as per manufacturers specifications : DYCE-C-NGP-ENGINEERING/CENTRAL RLY 13.48.1 Two or more coats applied on walls @ 1.25 Sqm 23660 193.7 4582942 79 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm 13.48.2 Painting wood work with Deluxe Multi Sqm 540 176.25 95175 Surface Paint of required shade. Two or 80 more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture 13.48.3 Painting Steel work with Deluxe Multi Sqm 2160 170.7 368712 Surface Paint to give an even shade. Two or 81 more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture Finishing with Epoxy paint (two or more coats) at all locations prepared and applied 13.52 as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. 82 13.52.1 On steel work Sqm 480 241.75 116040 13.114 Melamine polishing on wood work (one or Sqm 800 138.1 110480 83 more coat). 15.0 DISMANTLING AND DEMOLISHING 15.1S General Demolishing cement concrete manually/ by mechanical means including disposal of 15.2 material within 50 metres lead as per direction of Engineer - in - charge. 15.2.1 Nominal concrete 1:3:6 or richer mix cum 60 2434.25 146055 84 (including equivalent design mix) Demolishing brick work manually/ by mechanical means including stacking of 15.7 serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. 85 15.7.4 In cement mortar cum 60 2060.2 123612 Taking out doors, windows and clerestory 15.13 window shutters (steel or wood) including stacking within 50 metres lead : 86 15.13.1 Of area 3 sq. metres and below Each 54 143.5 7749 Dismantling steel work in single sections 15.17 including dismembering and stacking within 50 metres lead in: 87 15.17.1 R.S. Joists Kg 468 3.4 1591.2 88 15.17.2 Channels, angles, tees and flats Kg 540 2.3 1242 Dismantling tile work in floors and roofs laid 15.23 in cement mortar including stacking material within 50 metres lead. 89 15.23.1 For thickness of tiles 10 mm to 25 mm Sqm 180 73.4 13212 Dismantling roofing including ridges, hips, 15.28 valleys and gutters etc., and stacking the material within 50 metres lead of: 90 15.28.1 G.S. Sheet Sqm 240 164.95 39588 91 15.28.2 Asbestos Cement sheet Sqm 240 77.3 18552 15.52 Dismantling of flushing cistern of all types Each 3 112.05 336.15 (C.I./PVC/Vitreous China) including stacking 92 of useful materials near the site and disposal of unserviceable materials within 50 metres lead. 15.60 Disposal of building rubbish / malba / similar cum 180 263.95 47511 unserviceable, dismantled or waste materials by mechanical means, including 93 loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. DYCE-C-NGP-ENGINEERING/CENTRAL RLY 16.0 ROAD WORK 16.1S ROADS 16.1 Preparation and consolidation of sub grade Sqm 1320 218.9 288948 with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to 94 camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres. 16.15S FENCING 16.15 Supplying at site : 16.15.1 R.C.C. Standards post/ struts/rails/ pales of cum 1.8 32891.2 59204.16 mix 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 12.5 mm nominal size) with wooden plugs or 6mm bar nibs 95 wherever required as per direction of Engineer-in- charge (cost of earth works in excavation, concrete works in foundation to be paid separately). Fencing with R.C.C. post placed at required distance, embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post one side only, provided with horizontal lines and two diagonals of barbed wire weighing 9.38 kg 16.17 per 100 metres (minimum), between the two posts fitted and fixed with G.I. staples on wooden plugs or G.I. binding wire tied to 6 mm bar nibs fixed while casting the post (cost of R.C.C. posts, struts, earth work and concrete to be paid for separately) :- Payment to be made per metre cost of total length of barbed wire used. 96 16.17.1 With G.I. barbed wire Metre 1020 14 14280 16.42S CONCRETE PAVEMENTS Providing and laying design mix cement concrete of M-30 grade, in roads/taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved and specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ 16.43 camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction and longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer-in-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately). 16.43.2 Cement concrete manufactured in automatic cum 324 11098.45 3595897.8 97 batching plant (RMC plant) including transportation to site in transit mixer DYCE-C-NGP-ENGINEERING/CENTRAL RLY 16.45 Providing and fixing pre-moulded joint filler per cm 3240 5.3 17172 in expansion joints of RCC roads / CC depth pavements after making the joints dust free per cm with high pressure air jet cleaners, all width complete as per direction of the Engineer-in- per 98 Charge. (Pre-moulded joint fillers shall be metre made of bitumen hot sealing compound length impregnated fibre board having impregnation more than 35%, conforming to IS:1838 for fibre board and IS: 1834 for hot sealing bitumen compound grade A.) Providing and filling in position rubberized bitumen hot sealing compound for sealing of 16.46 expansion joints in roads / pavements all complete as per direction of the Engineer-in- Charge. 16.46.1 per cm 3720 8.65 32178 Providing and filling in position rubberized depth bitumen hot sealing compound for sealing of per cm 99 expansion joints in roads / pavements all width complete as per direction of the Engineer-in- per Charge. metre length 16.49S MISCELLANEOUS 16.62 Providing and applying 2.5 mm thick road Sqm 126 747.8 94222.8 marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile 100 shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer- in-charge and accordance with applicable specifications. 16.68 Providing and laying 60mm thick factory Sqm 300 972 291600 made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in 101 required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. 16.69 Providing and laying at or near ground level cum 54 10117.6 546350.4 factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except 102 at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured to calculate volume for payment). (Precast C.C. kerb stone shall be approved by Engineer-in- charge). DYCE-C-NGP-ENGINEERING/CENTRAL RLY 16.89 Providing and laying matt finished vitrified Sqm 720 1455.65 1048068 tile of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals 103 location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. 17.0 SANITARY INSTALLATIONS 17.1S General Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush 17.1 pipe, with manually controlled device (handle lever) conforming to IS : 7231,with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 17.1.1 White Vitreous china Orissa pattern W.C. pan Each 25 6767.4 169185 104 of size 580x440 mm with integral type foot rests Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm 17.3 flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 17.3.1 W.C. pan with ISI marked white solid plastic Each 40 8006.6 320264 105 seat and lid Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, 17.7 including painting of fittings and brackets, cutting and making good the walls wherever require: 17.7.1 White Vitreous China Wash basin size Each 40 2648.85 105954 106 630x450 mm with a pair of 15 mm C.P. brass pillar taps 17.16A Providing and fixing 8 mm dia C.P. / S.S. Jet Each 40 349.15 13966 with flexible tube upto 1 metre long with S.S. 107 triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge. Providing and fixing P.V.C. waste pipe for 17.28 sink or wash basin including P.V.C. waste fittings complete. 17.28.1 Semi rigid pipe 108 17.28.1.1 32 mm dia Each 60 103.9 6234 17.28.2 Flexible pipe 109 17.28.2.1 32 mm dia Each 40 119.55 4782 17.31 Providing and fixing 600x450 mm bevelled Each 126 1607.95 202601.7 edge mirror of superior glass (of approved 110 quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. DYCE-C-NGP-ENGINEERING/CENTRAL RLY Providing and fixing mirror of superior glass (of approved quality) and of required shape 17.32 and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : 111 17.32.2 Rectangular shape 453x357 mm Each 24 1361.8 32683.2 17.33 Providing and fixing 600x120x5 mm glass Each 100 1083.5 108350 shelf with edges round off, supported on anodised aluminium angle frame with C.P. 112 brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. 17.34 Providing and fixing toilet paper holder : 113 17.34.1 C.P. brass Each 100 803.7 80370 18.0 WATER SUPPLY 18.7S C.P.V.C. PIPES Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of 18.8 pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 114 18.8.2 20 mm nominal dia Pipes Metre 1140 537.6 612864 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This 18.9 includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 115 18.9.3 25 mm nominal dia Pipes Metre 540 355.4 191916 116 18.9.6 50 mm nominal dia Pipes Metre 180 794.25 142965 18.15S BRASS FITTINGS Providing and fixing ball valve (brass) of 18.18 approved quality, High or low pressure, with plastic floats complete : 117 18.18.3 25 mm nominal bore Each 132 464.05 61254.6 C.I. SLUICE VALVES/ FIRE HYDRANTS & 18.31S FIXTURES 18.48 Providing and placing on terrace (at all floor Per 21600 11 237600 levels) polyethylene water storage tank, IS : Litre 12701 marked, with cover and suitable 118 locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 18.49S C.P. BRASS FITTINGS Providing and fixing C.P. brass bib cock of 18.49 approved quality conforming to IS:8931 : 119 18.49.1 15 mm nominal bore Each 54 506.8 27367.2 Providing and fixing C.P. brass angle valve 18.53 for basin mixer and geyser points of approved quality conforming to IS:8931 120 18.53.1 15mm nominal bore Each 40 574.3 22972 19.0 DRAINAGE 19.1S STONE WARE PIPES AND FITTINGS DYCE-C-NGP-ENGINEERING/CENTRAL RLY Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture 19.1 of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 121 19.1.3 200 mm diameter Metre 300 970.35 291105 122 19.1.5 300 mm diameter Metre 240 2064.15 495396 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand :10 graded stone 19.3 aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design : 123 19.3.5 300 mm diameter S.W. pipe Metre 180 1173.35 211203 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. 19.4 cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 19.4.2 150 x 100 mm size P type 19.4.2.1 With common burnt clay F.P.S. (non Each 18 2734.2 49215.6 124 modular) bricks of class designation 7.5 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size),foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), 19.7 inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total 19.7.1 weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : 19.7.1.1 With common burnt clay F.P.S. (non Each 24 12770.55 306493.2 125 modular) bricks of class designation 7.5 Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 19.21 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : 126 19.21.1 For pipes 100 to 250 mm diameter Each 18 810.45 14588.1 Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of 19.35 cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete 127 19.35.1 450 mm dia RCC pipes. Metre 108 2676.55 289067.4 21.0 ALUMINIUM WORK 21.1S General DYCE-C-NGP-ENGINEERING/CENTRAL RLY Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM 21.1 rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion 21.1.1.2 Powder coated aluminium (minimum Kg 1320 530.9 700788 128 thickness of powder coating 50 micron) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings 21.1.2 wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2.2 Powder coated aluminium (minimum Kg 2500 634.45 1586125 129 thickness of powder coating 50 micron) Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene 21.3 gasket etc. complete as per the architectural drawings and the directions of engineer-in- charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.2 With float glass panes of 5 mm thickness Sqm 504 1505.25 758646 130 (weight not less than 12.50 kg/sqm) Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU 21.19 sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete, complying to ASTM C920, DIN 18540-F & ISO 11600 131 21.19.1 Upto 5 mm depth and 5 mm width Metre 300 148.1 44430 22.0 WATER PROOFING 22.1S General DYCE-C-NGP-ENGINEERING/CENTRAL RLY 22.6 Providing and laying water proofing Sqm 960 688.9 661344 treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying:(a) after surface preparation, first layer of slurry of cement @ 0.488kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than10 cm. (c) third layer of 1.5 mm thickness 132 consisting of slurry of cement @1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured. 23.0 RAIN WATER HARVESTING & TUBEWELLS 23.1S General Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore 23.1 log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level. 23.1.1 All types of soil 133 23.1.1.1 300 mm dia Metre 36 707.75 25479 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, 23.3 including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in- charge. 134 23.3.3 200 mm nominal size dia Metre 36 1113.35 40080.6 Providing and fixing suitable size threaded mild steel cap or spot welded plate to the 23.13 top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 135 23.13.3 200 mm dia Each 2 321.15 642.3 26.0 NEW TECHNOLOGIES AND MATERIALS 26.73S PREFAB/PRECAST TECHNOLOGY DYCE-C-NGP-ENGINEERING/CENTRAL RLY 26.81 Providing and fixing Scaffolding net of Sqm 6000 29.25 175500 required width made of high density Polyethylene UV stabilized knitted on warp knitting machines having density 100 grams / sqm and shading coefficient minimum 75% around the construction site/ for vertical extension as per requirement including fastening/tying with building/scaffolding 136 pipes or with any other fixtures etc. complete as per direction of Engineer-in- Charge. (One time payment shall be made for providing Scaffolding net from start of work till completion of work including shifting if any. The Scaffolding net shall be the property of the contractor on completion of the work) Total 166670960.69

Item Breakup - 5-DSR 2020 HORTICULTURE & LANDSCAPING

Plastic Pot as per direction of the officer-in- charge. 6.0 GROUND COVERS PLANTS 6.9 Providing and stacking of Chlorophytum- Each 120 20 2400 variegated, full of leafy suckers in 15 cm size 12 of Earthen Pot/Plastic Pot & a s per direction of the officer-in-charge. 6.12 Providing and stacking of Duranta Golden, Each 30 20 600 having ht.15 to 20 cm bushty shape with 13 fresh and healthy leaves in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge. Total 337190.40