SPECIAL REPAIRS FOR REPLACEMENT OF OLD UNSERVICEABLE HT/LT CABLE, LT PANELS, MCCB AND ALLIED WORKS IN SASF ODIANWALI AT MILITARY STATION FAZILKA

Amount

Excavation in trenches , n exc 1.5 m wide and n, exc 1.5 m in depth for foundation, etc. or for shafts, wells cesspits, manholes, peir holes. Etc 1.5 m n exc 10 sqm on plan and n exc, 1.5 m in depth and getting out complete as specified & directed

M&F for returning, filling including spreading, leveling, watering and well ramming in layers not exc 25cm in soft/soil complete all as specified and directed

M&L for removing excavated soil not exc 50m depositing where directed at a level not exc 1.5m above the starting point complete all as directed and specified & directed.

M&L for sand cushioning with dry clean locally available sand for under ground cable 8cm before laying cable and 15 cm after laying and punned to 18 cm after laying of cable complete all as specified anddirected by Engr-In-Charge.

M & L for boring hole across the Road/plinth/hard standing by trench less technology method suitable for 100mm bore pipe for 0.4 mpa working pressure for cable passing without damaging Road / Plinth /Floor complete all as specified and directed.

M & L for brick protection with old size sub class 'B' bricks laid flat , length of bricks across the route of underground cable all as specified and directed by Engineer-in-Charge.

Taking out old unservicable HT/LT UG cable of 4/3.5 core x 10 Sqmm to 95 Sqmm size and shall be deposited to place where as directed by Engr In Charge.

Supply laying & testing cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty)with stranded aluminum conductor, 11000 volts grade, of size 3 core 95 sq mm complete all as specified and directed by Engr-In-Charge.

Supply and lay cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 Sqmm 4 core complete all as specified and directed by Engr-In-Charge.

Supply and lay cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 Sqmm 2 core complete all as specified and directed by Engr-In-Charge.

All as per item No 10 above but size 25 Sqmm 3.5 core.

All as per item No 10 above but size 35 Sqmm 3.5 core.

All as per item No 10 above but size 50 Sqmm 3.5 core.

All as per item No. 10 above but size 95 Sqmm 3.5 core.

Relaying of XLPE insulated electric power cable 1100 Volts grade of any size complete all as specified and directed by Engr-in-Charge.

Relaying of XLPE insulated electric power cable 11100 Volts grade of any size complete all as specified and directed by Engr-in-Charge.

Relaying only old bricks laid in flat all as directed by Engineer in charge

S&F Cable jointing kit for 11 KV (Earthed) grade cable for outdoor end termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 sqmm complete all as spd and dir by Engr-in-Charge.

S&F Cable jointing kit for 11 KV (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 sqmm complete all as spd and dir by Engr-in-Charge.

Repairing of panel with disconnecting of LT supply and opening bus bar chamber / Cable box chamber of outdoor/ indoor LT kiosks / Panel , removing of burnt out lugs, burnt/unserviceable MCB / MCCB/isolators of any rating/size and cleaning of bus bar with CTC solutions, insulating the bus bar by taping with RYB colours, connecting necessary aluminium lugs and nuts bolts of existing size and refixing burnt MCB/MCCB with new MCB/MCCB of same make and rating complete all as specified and directed by Engineer in charge. Note: (1) Aluminium lugs of any size as per site shall be measured and paid under this item. (2) MCB/MCCB of any rating and make will be measured and paid seprately.

Supply and Fixing MCCB 4 pole 63 A , 415 V, 50Hz having breaking capacity 35 KA with adjustable thermal & magnetic setting complete all as spd and directed by Engg.in.Charge

Supply and Fixing MCCB 4 pole 100 A , 415 V, 50Hz having breaking capacity 35 KA with adjustable thermal & magnetic setting complete all as spd and directed by Engg.in.Charge

Supply and Fixing MCCB 4 pole 125 A , 415 V, 50Hz having breaking capacity 50 KA with adjustable thermal & magnetic setting complete all as spd and directed by Engg.in.Charge.

Supply and Fixing MCCB 4 pole 200 A , 415 V, 50Hz having breaking capacity 35 KA with adjustable thermal & magnetic setting complete all as spd and directed by Engg.in.Charge.

M&L for Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of earth plate at a depth of not less than 1.5 metre below ground level, earth plate surrounded by 15cm thick and packed layer of charcoal dust and common salt, connected to galvanised iron earth strip32x6 mm thick fixed by means of bolts, nuts and washers of the earth wire galvanised iron or steel and thimbles and other end of the earth wire connected to earthing test point and protected by galvanised iron pipe light grade 40mm dia upto 3m height above ground level and watering pipe 20mm dia GI medium grade with socket and plug 30 cm above ground level including earthwork, PCC chamber in PCC (1:3:6) type C-2 using 40mm stone aggregate, cast iron cover, wire meah etc all as shown in electrical plate No. 3 of MES Schedule Part-I of SSR-2009 complete and all as specified and direcrted by Engr-in-charge Notes :- (i) 20 mm dia GI pipe for watering to be provided with a socket and plug and should be 30 cms above ground level. (ii) GI strip connecting upto pump,Gen set,LT panel and DBs earth connection is included in this item. (iii) GI pipe 40 mm dia protection pipe shall be provided upto Ground level.

Supply and install HT 11 KV outdoor gang mechanically operated air-break switch suitable for horizontal or vertical mounting with operating mechanism worked from ground level with drop out fuse having 12 insulators of rating upto 200 Amps complete all as spd and dir by Engr-in-Charge. -------------------------------------------------------------------------------------------------------------- Note : A sum of Rs. 1,04,900.00 will be deducted on account of credit for taken down material. Please refer details on Srl Page No.33 (Schedule of Credit) of Tender documents.

POOJA CONSTRUCTION COMPANY

SHRI SHYAM CONSTRUCTION CO.

A R CONSTRUCTION COMPANY

G S CONSTRUCTIONS

jassal engineering

UNITED ENGINEERING CORPORATION

SHIVANI ENTERPRISES

N.R.Builders