Business plan work 2023 24

Amount

Safe loading & carriage including unloading & proper stacking of following store materials from ESC Lucknow/JE store to site of work & Vice Versa.

33 KV 3x300 sq mm XLPE Cable

33 KV 3x300 sq mm XLPE St/Th J/Kit

33 KV 3x300 sq mm XLPE O/D J/Kit

ST Pole 11 Mtr Long

33 KV Pin Insulator

33 KV Pin with Nut

MS earthing rod 20x2500 mm

MS angle 65x65x6MM 5.8 kg / Mtr.

M.S. Channel 100x50 sq mm 10 kg / Mtr.

LT PVC Cable 1x400 sq mm

33 kv3x300 Sq.mm XLPE cable laying in 150mm GI pipe dia single circute (All the material required for laying will be supplied by the contractor & 33 KV XLPE cable will be supplied by the department)

Laying of XLPE Cable Size 33 KV 3x300 sq mm Single circuit in normal soil by digging of trench 1050 mm deep, 500mm wide including supply of required material, 1st class bricks, stone pad & fine sand and back filling of digged trench and proper leveling after laying of cable. (All the material required for laying will be supplied by the contractor & 33 KV XLPE cable will be supplied by the department)

33 KV 3x300 sq. mm XLPE cable laying by drilling method Single Circuit with drilling machine approx 1.5 M to 2.00 M deep. (All material shall be provided by contractor except cable)

33 KV 3x300 sq. mm XLPE cable laying by drill method single circuit with HDPE Pipe 150 mm. (All material including HDPE pipe provided by contractor, cable will be provided by the Dept.)

Hoisting of 33 KV cable on double pole exposure with GI pipe of size 6" dia 3 M long including its jumpering complete with clamps, nuts and bolts. (All the material will be supplied by the contractor & 33 KV XLPE cable will be supplied by the department)

Digging of pit for making straight through joint 33 KV 3x300 sq mm Work includes filling of soil, leveling and ramming of the same .(St/Th Provided by the department)

Fabrication & erection of 33 KV cable exposure type double pole with the provision of separate bus bar for each cable with fixing of necessary clamps and other accessories like danger board, number plate, barbed wire, 9 no. pin insulators with pins,2 no. channels 100x50 mm (1600mm each),1 no.MS channel 100x50 mm(3200mm in length) and 2 no.MS angle 65x65x6 mm (each 3200mm in length ) for supporting the hoisting of cable etc. Its jumpering by single core PVC aluminum cable with proper size of lug as per RESSPO norms. (All material to be arranged by contractor except STP, MS Channel, MS Angle, 11 KV Pin Insulator, 11 KV Pin with nut & PVC cable shall be provided by the Dept.).

Grouting of pole in depth of 1/6 the length of pole in ratio 1:4:8 in cement sand and brick ballast and construction of pole plinth 300mm x 45mm above ground level in 1:2:4 in cement, coarse sand and stone grit as per RESPO norms. (All material shall be provided by contractor)

Construction of pole plinth 300mm x 45mm above ground level in 1:2:4 in cement, coarse sand and stone grit as per RESPO norms.

Painting of ST pole with one coat of red oxide & two coats of best quality paint. Top 2 mtr should be PO Red paint and remaining aluminium Paint ISI mark as per RESPO norms. (All material shall be provided by contractor)

High Pressure testing of XLPE cable. Testing equipment will be arranged by the contractor.

A.A. ENGINEERING CO.

Saraswati Electricals & Contractors

M/S MANSA ENTERPRISES

M/S AARADHYA AND ADHYATM ASSOCIATES