Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.2 LAccepted-AOC | L1 | Accepted-AOC Accepted | |
| 2 | L2₹47.9 L+₹3.2 L (7.27%)Rejected-Finance 0 HISAR HISAR HARYANA 125004 UDYAM HR 06 0052049 | HISAR | HARYANA | 125004 | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹48.3 L+₹3.7 L (8.31%)Rejected-Finance | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹48.9 L+₹4.3 L (9.53%)Rejected-Finance | L4 | Rejected-Finance Not Lowest | |
| 5 | L5₹49.0 L+₹4.4 L (9.86%)Rejected-Finance C O UTTAM BANIK HAIDERPARA OPPOSITE TO WEST BENGAL REPRESENTIVE REST HOUSE P O HAIDERPARA SILIGURI 06 | JALPAIGURI | WEST BENGAL | 734006 | L5 | Rejected-Finance Not Lowest |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
14 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SEVOKE ROAD
GE Sevoke Road Post Salugara Dist Jalpaiguri PIN 734008
WELCOME MAINT OF OLD OFFICERS AND CIV OFFICERS MD ACCN AT SEVOKE MIL STN UNDER GE SEVOKE ROAD
2023_MES_597901_1
8210/SEV OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
GE SEVOKE ROAD
AS PER TENDER DOCUMETNS
8 documents required · 8 mandatory
₹500
Yes
GE SEVOKE ROAD
₹90,000
Yes
26 Jun 2023
24 May 2023
16 Jun 2023
24 May 2023
14 Jun 2023
8 Jun 2023
25 May 2023 - 3 Jun 2023
Amount
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed
Taking down cement plaster on brick wall/concrete surfaces etc including racking out joints hacking for key scrubbing down with water etc of any thickness including Dado any description complete all as specified and directed.
Demolition of brick work built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed.
Demolition of cement concrete (reinforced) of any description and in any position and removing rubbish off the premises complete all as specified and as directed.
Taking down wooden chowkats or frames with shutters(without taking off shutters from the frames) area not exceeding 1.50 Sqm each complete all as specified and directed.
Taking down wooden chowkats or frames with shutters(without taking off shutters from the frames) area exceeding 1.50 Sqm but not exceeding 4 Sqm each complete all as specified and directed.
Taking down shutters of any description area exceeding 1.00 Sqm but not exceeding 2.00 Sqm each complete all as specified and directed.
Taking down old window/ventilators of any description not otherwise specified and in any position complete all as specified and directed.
Hacking out old broken glasses ( any thickness/type and in any position ) from wooden frames/metal frames fixed with oil putty or beads etc and removing from site complete as specified and directed.
Taking up or down 15 mm bore steel tubing and connections including removal from site complete all specified and directed.
Taking up or down 20 mm bore steel tubing and connections including removal from site complete all specified and directed.
Taking up or down 25 mm bore steel tubing and connections including removal from site complete all specified and directed.
Dismantling PVC water tank of capacity exc. 250 litrs and not exc. 500 litrs complete all as specied and directed.
Dismantling PVC water tank of capacity exc. 500 litrs and not exc. 1000 litrs complete all as specied and directed.
Dismantling of wall and ceiling boards (fiber, pulp, insulation, etc.) any thickness including cover fillets complete as specified and directed.
Material and labour for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles with and including 15mm thick screed bed or bedding layer of CM 1:6 for laying of floor finishes complete all as specified and directed.
Material and labour for non skid ceramic coloured tiles 8 to 10mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles with and including 15mm thick screed bed or bedding layer of CM 1:6 for laying of floor finishes complete all as specified and directed.
Material and labour for glazed coloured ceramic tiles of size 450x300x 7mm thickness in vertical surfaces set and jointed in neat cement slurry and pointed in coloured cement to match with the shade of tiles including 10 mm thick backing layer of CM 1:3 for fixing of tiles on wall complete all as specified and as directed
Material and labour for vitrified ceramic tiles 10mm thick (square/rectangular) polished ,area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including 15mm thick screed bed or bedding layer of CM 1:6 for laying of floor finishes complete all as specified and directed.
Material and labour for vitrified ceramic tiles 10mm thick (square/rectangular) polished ,area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm, in verticle surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete all as specified and directed.
Material and labour for vitrified ceramic tiles 10mm thick (square/rectangular) polished ,area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including 15mm thick screed bed or bedding layer of CM 1:6 for laying of floor finishes complete all as specified and directed.
Material and labour for vitrified ceramic tiles 10mm thick (square/rectangular) polished ,area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm, in verticle surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete all as specified and directed.
Roughening surfaces of old concrete floor by picking sweeping clean and washing down with water to remove dust and brushing neat cement slurry with 3 kg of cement per sqm complete all as specified.
Supply and fixing over head shower 150x150 mm squarel shape single flow (ABS body chromimum plated with plate) with rubit cleaning system complete all as specified and as directed.
Supply and fixing shower arm casted 190 mm long light body round shape for wall mounted shower with flange complete all as specified and as directed.
Supply and fixing 15mm bore CP toilet hand pressed nozzle (health faucet) with 1.2 mtr long flexible tube with CP wall bracket including taking down the old one with N.R.V (back flow preventer) complete all as specified and as directed.
Supply and fixing stainless steel towel rack with lower hanger with hook complete all as specified and as directed.
Supply and fixing stainless steel soap dish recessed type complete all as specified and as directed.
Supply and fixing stainless steel towel ring square complete all as specified and as directed.
Supply and fixing CP toilet roll holder with flap complete all as specified and as directed.
Supply and fixing bathroom mirror with 2x magnifying and wall bracket with adjustable frame as aprroved by GE.
Supply and fixing in repairs CP brass towel rail 60 cm long including fitting complete all as specified and directed.
Material and labour 20mm thick granite slabs of any type (table rubbed and polished) on cooking platforms set and jointed in neat cement slurry and pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite including necessary moulding at edges laid over and including 10mm thick screed bed in cement mortar (1:3) complete all as specified and directed.
Material and labour for PCC 1:2:4 type B-1(using 20mm graded crushed stone aggregate) as in coping, bed plate, fillets or similar works including rounded or chamferred on edge with and including providing necessary form work complete as specified and directed.
Material and labour for machine pressed coloured chequered cement concrete tiles, size 30 cm x 30 cm x 25mm thick set, jointed and pointed with grey cement and pigment to match with shade of chequered cement concrete tiles, in floor, with and including 20mm thick screed bed or bedding layer of CM 1:6 for laying of floor finishes complete all as specified and directed.
Material and labour for 15mm thick rendering on other than fair faces of brick or concrete surfaces in CM 1:6 and finished the surface even and smooth without using extra cement complete all as specified and directed.
Material and labour for 20 mm thick rendering on fair faces of brick or concrete surface in CM 1:4 in two layers of 10mm each using water proofing compound on top layer only including finishing the surface even and smooth complete all as specified and directed.(WPC shall be measured and paid separately)
Material and labour for rendering 5 mm thick in CM 1:3 as in ceiling, finished the surface even and smooth complete all as specified and directed.
Supply only water proofing compound (integral) complete as specified and directed.
Material and labour for preparing old decorated plastered surface and applying one coat of cement base paint on walls complete all as specified and as directed,
Material and labour for preparation of new plastered surface and applying two coats of cement base paint over one coat of primer on walls complete all as specified and as directed,
Material and labour for preparation of newly plastered ceiling surfaces and applying three coats of white wash complete all as specified and directed.
Material and labour for preparation of newly plastered wall surfaces and applying three coats of white wash complete as specified and directed.
Material and labour for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer over one coat of wall care putty complete all as specified and directed.
Material and labour for brick work with sub class 'B' bricks using old size bricks straight or curved on plan exc 6 meter mean radius built in CM 1:6 complete all as specified and as directed.
Material and labour for brick work with sub class "B" bricks using old size bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.
Material and labour for cement concrete 1:2:4 type B-1 (Using 20mm graded crushed stone aggregate) as in surface channels and drains including providing necessary formwork complete all as specified and directed.
Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed.
Material and labour for reinforcement Mild Steel TMT bars 8mm dia cut to length, bent to shape required including cranking, bending, hooking ends and binding with and including mild steel wire annealed, not less than 0.9 mm dia or securing with clips complete all as specified and as directed.
Material and labour for RCC nominal mix 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in kitchen slab, fins, fascias etc. complete all as specified and as directed.
Supply and fixing factory made 2nd class hard wood 35mm thick Glazed and Skelton shutters, open rebated and prepare to receive glass, gauge, etc (without sash bars), edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR part-I Section 8 and clause 8.24(a) complete all as specified and directed.
Supply and fixing factory made 2nd class hard wood 35mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply with commercial veneering on both faces . The size of rail and style as per IS: 1003 (part I) kiln seasoned and chemically pressure treated, complete all as specified and directed.
Supply and fixing flush door shutters 30mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
Supply and fixing 2nd class hard wood (SAL) plain, solid, straight chowkhats & frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete as specified and directed.
Supply and fixing solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.
Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement & fix in the frame at site as per specification and drawing complete all as specified and directed.
Supply and fixing mild steel stove enamelled black 300mm long ordinary rat rail rod pattern spring fixed with screws to wooden chowkhats or welding to steel chowhats, complete all as specified and directed
Supply and fixing in repair 300mm long ordinary rat rail rod pattern spring of mild steel including roller and roller plate for skelton door shutter (having wire mesh) complete all as specified and directed
Supply and fixing 300 mm aluminum anodised sliding door bolts, ISI marked, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminum alloy, complete all as specified and directed.
Supply and fixing 200mm size aluminium, anodised barrel tower bolt of extruded section ISI marked complete as specified and directed.
Supply and fixing 100mm long mild steel medium weight butt hinges complete all as specified and directed.
Supply and fixing Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.
Supply and fixing 100mm long stainless steel medium weight butt hinges complete all as specified and directed.
Supply and fixing aluminum handles, cast type, anodized 150mm long complete as specified and directed.
Material and labour for preparation of new wooden surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete as specified and directed.
Supply and fixing steel ventilators with top hung shutter including hinges, steel peg stay complete including one coat of red oxide zinc chrome primer complete all as specified and directed.
Supply and fixing mild steel square bar 12mm in grill or guard bars welded to steel window all as specified and directed.
Supply and fixing 3mm thick sheet glass ordinary quality & glazing with oil putty in square not exc 0.50 Sqm in each pane complete all as specified and directed.
Supply and fixing 3mm thick figured glass pin head type and glazing with oil putty in square not exc 0.50 Sqm in each pane complete all as specified and directed.
Supply and fixing steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay complete, with glazing bars, dovetailed or welded including one shop coat of zinc chrome primer complete all as specified and directed.
Supply and fixing steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded including one shop coat of zinc chrome primer complete all as specified and directed.
Supply and fixing Mild Steel flat iron fillets fixed to fly proof steel window shutters with screws or riveted for securing wiring gauze etc and as in wind tiles for roof complete as specified and directed.
Material and labour for preparation of newly primed steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint complete as specified and directed.
Supply and fixing in repair vitreous china squatting pan "ORISSA" pattern of size 580x440mm white, with integral foot rests (excluding flushing cistern & flush pipe) including provision of lime concrete bedding complete all as specified and directed.
Supply and fixing in repair vitreous china EWC white with 'P' or 'S' trap front or back inlet any pattern excluding flushing cistern & flush pipe but including plastic water closet seat black closed pattern with flat bottom and cover and hinging device complete all as specified and directed.
Supply and fixing in repair PVC valve less, syphonic action type, flushing cistern low level, 10 liter capacity with it's complete accessories, fixed complete including connection to water pipe and PVC 32mm dia flush pipe etc complete all as specified and directed.
Supply and fixing in repair vitreous china ware wash basin, white, flat back, size 550x400mm including CI brackets, CP brass waste coupling 32mm fixed complete all as specified and as directed.
Supply and fixing in repair CP brass towel rail 60CM long including fittings complete all as specified and as directed.
Supply and fixing in repair CP brass overhead shower 80mm dia round shape and shower Arm 240mm long with wall flange complete all as specified and directed.
Supply and fixing 15 mm bore medium grade galvanized steel water tubing with all fittings and fixed to wall/ceiling or laid in floor complete all specified and directed.
Supply and fixing 20 mm bore medium grade galvanized steel water tubing with all fittings and fixed to wall/ceiling or laid in floor complete all specified and directed.
Supply and fixing 25 mm bore medium grade galvanized steel water tubing with all fittings and fixed to wall/ceiling or laid in floor complete all specified and directed.
Refixing old steel tubing 15 mm bore and connections in new or old position (walls/ceilings/floors etc) complete all as specified and as directed.
Refixing old steel tubing 20 mm bore and connections in new or old position (walls/ceilings/floors etc) complete all as specified and as directed.
Material and labour for cleaning and removing all scale and dirt, etc. from tanks and from mouth of circulating pipes, etc of capacity exc. 250 litrs and not exc. 500 litrs complete all as specied and directed.
Material and labour for cleaning and removing all scale and dirt, etc. from tanks and from mouth of circulating pipes, etc of capacity exc. 500 litrs and not exc. 1000 litrs complete all as specied and directed.
Material and labour for cleaning and removing all scale and dirt, etc. from tanks and from mouth of circulating pipes, etc of capacity exc. 1000 litrs and not exc. 2000 litrs complete all as specied and directed.
Supply and fixing rotational moulded polyethylene water storage tank ( Triple layer quality) cylindrical vertical with closed top of capacity 500 liters, hoisted and fixed in position with connection ports (inlet, outlet and over flows) and connecting up pipes complete all as specified directed.
Supply and fixing rotational moulded polyethylene water storage tank ( Triple layer) cylindrical vertical with closed top of capacity 1000 liters, hoisted and fixed in position with connection ports (inlet, outlet and over flows) and connecting up pipes complete all as specified directed.
Supply and fixing in repair 15 mm bore bib tap fancy type cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe and fixed complete all as specified and as directed.
Supply and fixing in repair 15mm bore CP brass angle valve (concealed type) with capstan head wall flange etc screwed down screwed for iron pipe complete all as specified and directed.
Supply and fixing in repair 15 mm bore pillar tap cast copper alloy with capstain head, chromium plated, fancy type screwed down high pressure with or without letter hot or cold with long screwed shank and fly nuts screwed for iron pipe complete as specified and as directed.
Supply and fixing in repair 15mm bore stop valve cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed, complete all as specified and directed.
Supply and fixing in repairs 15 mm bore stop valve (male or female thread) cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) with capstan head wall flange etc screwed down screwed for iron pipe complete all as specified and directed.
Supply and fixing in repair gun metal gate / globe valves 15mm bore with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.
Supply and fixing in repair gun metal gate / globe valves 20mm bore with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.
Supply and fixing in repair, gun metal gate / globe valves 25mm bore with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.
Supply and fixing in repair , 20mm bore PTMT ball valves, high pressure, with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 20mm - 210 gms) complete all as specified and as directed.
Supply and fixing in repair 25mm bore PTMT ball valves, high pressure, with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed.
Supply and fixing in repair PVC connections 15mm bore with PTMT nuts of length 450mm, complete all as specified and as directed.
Supply and fixing in repairs 15mm bore CP Toilet Hand Pressed Nozzle (Heath faucet) with 1.5 meter long tube with CP wall bracket complete all as specified and as directed.
Material and labour for Cutting chases in brick walls girth exc 10 cm but n.exc 20 cm , pinning in making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing etc and making good complete all as specified.
Supply and fixing PVC waste pipe suitable for 32mm dia waste coupling for wash hand basin complete all as specified and directed
Supply and fixing in repair vitreous china pedestal stand white colour suitable for wash hand basin complete all as specified and directed.
Supply and fixing stainless steel grating 100mm dia over floor-trap and including jointing with solvent cement complete as specified and directed.
Supply and fixing in repairs sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12cm wide with CP brass bracket guard railing 60cm long complete all as specified and directed.
Supply and fixing in repairs PVC (SWR) 110 mm bore pipes single socketed in any length with rubber ring joints fixed to walls or floor including taking down old unserviceable complete as specified and as directed.
Supply and fixing in repair PVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints fixed to walls or floor including taking down old unserviceable complete as specified and as directed.
Supply and fixing PVC (SWR) bends any radius suitable for 110mm bore pipe provided with access door complete all as specified and directed.
Supply and fixing PVC (SWR) bends any radius suitable for 75mm bore pipe provided with access door complete all as specified and directed.
Supply and fixing PVC (SWR) 110mm bore junction (Single T) equal or un equal provided with access door complete as specified and directed.
Material and labour PVC (SWR) gully trap 125/110 mm setting and jointed with solvent cement complete as specified and directed.
Supply and fixing PVC (SWR) floor trap plain with grating including jointing with solvent cement, dia of outlet 75mm, complete all as specified and as directed.
S&F PVC (SWR) 75mm bore junction (Single T) equal or un equal provided with access door complete as specified and directed.
Supply and fixing in repair plastic seat cover closed pattern with flat bottom and cover fixed with aluminium hinging device complete as specified and directed.
Supply and fixing in repairs sinks with drain board, gloss finish, made of stainless steel 1 mm thick sheet for kitchen with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.
Supply and fixing in repair sinks without drain board, gloss finish, made of stainless steel 1 mm thick for kitchen with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm, bowl size 410mm x 330mm x 160mm complete all as specified and directed.
Supply and fixing in repair stainless steel plate rack of size0.80m x 0.75m made out of 1.00 mm thick sheet for kitchen fixed to wooden plugs with chromium plated brass screws complete all as specified.
Supply and fixing repair brass, CP wall mixture 15 mm bore with L-bend for overhead shower complete all as specified and as directed.
Material and labour in replacement 18/19 mm thick pre-laminated particle board exterior grade pre-laminated one side with decorative choice laminated and other side balancing white lamination fixed with screws to timber frame work as in cup board shutters, partitions and shelves complete as specified and directed.
Material and labour in replacement 18/19mm thick block boards grade 1 quality exterior grade commercial type fixed with screws to timber frame work as in cup board shutters, kitchen cabinets, shelves etc complete as specified and directed.
Material and labour for external teak wood lipping 6mm thick and 18/19mm wide for block boards fixed with nails complete as specified and directed.
Material and labour for 1st class hard wood fillets area exc 3 but n.exc 6 sqcm wrought square or rectangular in section plain or bull nosed, splayed, chamfered or rounded on one edge or face fixed with nails complete as specified and directed.
Supply and fixing continuous (Piano) hinges mild steel bright finish or electro galvanised, width of flaps when open 30mm complete as specified and directed.
Supply and fixing in repair stainless steel tubular curtain rod 25mm dia as per sample kept in GE Office complete as specified and directed.
Supply and fixing stainless steel brackets for curtain rod 25mm dia as per sample kept in GE Office complete as specified and directed.
Supply and fixing stainless steel knobs for curtain rod 25mm dia as per sample kept in GE Office complete as specified and directed.
Supply and fixing in repairs mild steel handle of size 100 mm long for window complete as specified and directed.
Supply and fixing in repairs mild steel peg stay of size 300mm long for window complete as specified and directed.
Supply and fixing 19 mm thick plywood grade BWR as in cabinet all as specified and as directed .
Material and labour 1.5 mm thick PVC laminates and fixed with approved Adhesive as per manufacturer instructions complete all as specified and as directed. .
Material and labour 0.9 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer instructions complete all as specified and as directed.
Supply and fixing Aluminium anodised profile handle no protuding type and shall match the surface of cubical complete all as specified and as directed.
Supply and fixing Kitchen cabinet hinges 2 hole full over lay mak of Godrej complete as specified.
Supply and fixing in repair vitreous china wall hung/ mounted EWC white with 'P' trap front or back inlet any pattern excluding flushing cistern & flush pipe but including hydraulic plastic water closet seat cover white closed pattern with flat bottom and cover and hinging device complete all as specified.
Supply and fixing metropole flush vavle (Chrome,regular) 40 mm size for wall hung/ mounted EWC including cutting of concealed lines etc complete as specified.
Supply and fixing 605X605mm anodised aluminium snap grid frame work for false ceiling including 2.5mm dia mild steel wire galvanized class 3, @ 60cm centre to entre and fixed to steel or wooden member including 4mm thick Decorative non asbestos fibre cement boards fixed or laid/ inserted to aluminium frame work as in ceiling complete all as specified and directed. Note:- The size of aluminium main and croos tee shall be 40mm x25mm x2mm and size of angle shall be 25mm x 25mm x 2mm)
Material and labour for preparation of old decorated surfaces of walls including brooming down or steel wire brushing scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying two coats of white wash complete as specified and directed.
Material and labour for preparation of old decorated surfaces of ceiling. including brooming down or steel wire brushing scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying two coats of white wash complete as specified and directed.
Material and labour for preparation of old decorated surfaces of walls including washing, rubbing down and stopping of distempered surface and applying two coat of distemper (oil emulsion) over a coat of primer of any tint on walls complete as specified and directed.
Material and labour for 2-3 mm thick wall care putty on wall complete as specified and directed.
Materials and labour for complete removal of existing paint from surfaces of wall and applying two coats of weather proof exterior emulsion paint of approved colour over a coat of primer after preparation of surface complete all as specified and directed.
Re-writing letters or figures (Block, Roman, Italic or Indian) n.exc 30cm height with synthetic enamel paint complete as specified and directed.
Material and labour for preparation of old painted surfaces of wood and wood based materials of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete as specified and directed.
Material and labour for preparation of old painted surfaces of steel of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete as specified and directed.
Material and labour for preparation of old decorated surfaces of walls including washing, rubbing down and stopping of external surface and applying two coat of weather coat over a coat opf primer of any tint on walls complete as specified and directed.
Taking down carefully steel rolling shutter without ball bearing from existing position and refixing the same after replacing the unserviceable parts including necessary greasing and making good the disturbed surfaces complete all as specified and directed.(Note:-Unserviceable parts replaced will be measured and paid separately under relevant item.)
Supply and fixing Steel rolling shutters of thickness 1.25 mm without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated,complete: push pull or manual type including taking out old unsv rolling shutter and removed from site complete all as specified and directed.
Supply and fixing Safety lever locks mild steel with 4 levers for rolling shutters complete as specified.
Material and labour for applying one coat of aluminium paint on steel surfaces (Steel gate/ rolling shutter) complete all as specified and directed
Supply only mild steel spring of 100mm diameter suitable for rolling shutters.
Supply only mild steel laths of thickness 1.00mm thick and 100mm wide (suitable for curtain), required for rolling shutter of clear width up to and including 3.5 meter complete all as specified and directed.
Supply and fixing basin mixture CP, cast copper alloy, 15 mm bore complete all as specified and directed.
Raj Enterprise
SHRI JAYANTA GHOSH
LIBERAL ENGINEER CONSTRUCTION
M/S DUTTA & DAS ENGINEERING CO.
D.D. BROTHERS
M/S HARMANS
MARWA CONSTRUCTION
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .