REPAIR TO ROOFING, FLOORING, PLASTERING, TILING, JOINERY AND OTHER MISC WORK OF 662 ARMY AVN SQN R AND O AT NAGROTA UNDER GE NAGROTA.

Amount

Dismantling asbestos cement (corrugated, semi corrugated etc) sheets in roof covering, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description, not other wise provided for, complete all as specified and directed.

Dismantling of wall & ceiling boards including cover fillets and wooden scantling if any, complete all as specified and directed.

Demolition of brick work / stone masonry built in cement mortar or cement lime mortar including all quoins ,arches , pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles, complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground levels), complete all as specified and directed.

Taking down cement plaster on brick or stone wall etc including raking out joints, hacking for key, scrubbing down with water, complete all as specified and directed.

M&L for mild steel rolled work as in roof trusses ( framed) , trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing( Beam, tee, angle, channel or flat sections ) including distance pieces, cleats etc. , conforming to grade Fe 410-S, complete all as specified and directed.

Brick work with sub class 'B' (old size) bricks straight or curved on plan exceeding 6 m mean radius built in cement mortar 1 : 6 complete all as specified and directed.

Ditto as per item No. 08 but except bricks.

M & L for rendering 15 mm thick on fair faces of brick work in CM 1:6, finished even and smooth without using extra cement, complete all as specified and directed.

M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 with using WPC (WPC to be measured and paid separately) finished even and smooth without using extra cement, complete all as specified and directed(externally).

Supply only liquid water proofing compound, complete all as specified and directed.

Preparation of new/old steel and iron surfaces to receive painting by coating with mordant solution including washing and cleaning of any description exceeding 10cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Prepration of old painted new or previously wooden surfaces any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint, complete all as specified and directed.

Preparing new/old plastered surfaces of walls and applying two coats of oil bound distemper over a coat of wall care putty 2 to 3mm thick, complete all as specified and directed..

Preparing new/old plastered surfaces of ceiling and applying two coats of oil bound distemper over a coat of wall care putty 2 to 3mm thick, complete all as specified and directed.

Preparing new/old plastered surfaces of walls and applying two coats of cement base paint, complete all as specified and directed.

M&L PCC 1:2:4 type D-2 (using 40 mm graded crushed stone aggregate) as in filling hard standing and mass concrete complete as specified and directed.

M & L for 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in sub base to flooring finished even and rough, complete all as specified and directed.

M&L for hard core of broken stone or boulder n exc 63 mm, deposited, spread and levelled in layers n exe 15 cm thick, watered and rammed to a true surface, complete all as specified and directed.

S&F as in repair PVC wall panelling using 6mm thick PVC sheet (using tongue & groove sysem for connecting two piece of panelling) using PW 1156 H-type section, PW 8200 PVC profile and PW 1128J type section of syntex(size of one panel 250mm wide x 1000m heigh), complete all as specified and directed.

M&L for light shade vitrified tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36sqm as in floors set and jointed in neat cement slurry and pointed in coloured cement to match over 15mm thick screed bed or bedding layer in CM 1:4 including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tile to store and rubbish off the premises, complete all as specified and directed.

S&F non skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured sement to match over 15mm thick screed bed or bedding layer of CM 1:4, complete and including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store,complete all as specified and directed.

Glazed ceramic coloured tiles(premier quality) in vertical surface 300x200x7mm thick jointing in neat cement slurry and pointing in colour cement to match including 10mm thick screed bed/bedding layers in CM 1:4, complete and including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store,complete all as specified and directed.

M & L 25 mm thick cement concrete 1:2:4 type B-1, (using 20 mm graded crushed stone aggregate) as in sub base of floor surface finished even and fair to receive top layer all as specified.

Rolled mild stel in joist, chanel, angle or tee sectins fixed independently without xonnecting plate and making shape of Y section and gebrication, complete all as specified and directed.

Galvanised 2 strand steel barbed wire 2.24 mm dia with barbed , 2 mm dia bars at 75 mm spacing & straining and fixing to any type of standarad rails strining bolts including securing or tying at crossing with & provision of galvanised Mild steel wire staples or steel pins etc as directed (each line wire of wire to be measured) all as specified

M&L Plain cement concrete 1:2:4 type B-1 (using 20mm graded aggregate) as in coping, bed plates, kerbs and the like benching, including weathering, slightly rounded or chamfered angles and throating including necessary form work complete all as specified.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm n. exc. 4.00 sqm each and removing from site complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc 1.50 sqm each and removing from site complete all as specified and directed.

Pressed steel frames factory made for doors out of 1.25mm thick PBI sheet with one of more rebates including necessary flat iron lugs, hinges, lock strike plate, hinges etc complete, size of frame 125x60mm complete all as specified and directed.

Pressed steel frames factory made for doors out of 1.25mm thick PBI sheet with one of more rebates including necessary flat iron lugs, hinges, lock strike plate, hinges etc complete, size of frame 105x60mm complete all as specified and directed.

Solid PVC door frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M S square tube, suppling and fixing in opening as per specification and drawing, complete all as specified and directed.

Second class hardwood 35mm thick factory made plain, framed, panelled shutter (two panels) with lock rail and panel of 9mm thick B.W.P commercial ply or 12mm thick veneered particle board with commercial veneering on both faces; size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated, complete all as specified and directed.

S & F 35 mm thick second class hard wood, factory made, glazed and skelton shutters, open rebated and prepared to receive glass, gauge, etc. (without sash bars), edges of framing plain, chamered or rounded, fitted with cut and mitred beads for securing glass, etc. Size of memebers of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) for doors, complete all as specified and directed.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and directed.

Box type steel window side hung double shutters with provision for desert coller/AC (Inside for wire mesh & outside for glass), including guard bar hinges, steel handle, tower bolt and steel peg stay complete with glazaing bar dovetailed for welded and fixed steel window shall be conforming to relevant IS complete all as shown on drawing No CEUZ/TD/1302/09, Sh 1/3 to 3/3 including taking down of existing steel windows, complete all as specified and directed. Note : Wire mesh and sheet glass shall be measured and paid separately.

S & F Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm dia and fixed with tinned tacks or galvanised mild steel staples, complete all as specified and directed.

S & F 3.00 mm thick Sheet glass ordinary quality and glazing with oil putty and pin(steel spring for fixing glass) in square n exc 0.5 Sqm in each pane, complete all as specified and directed.

S & F 3.00 mm thick Sheet glass ordinary quality and glazing with oil putty and pin(steel spring for fixing glass) in square n exc 0.5 Sqm in each pane including hacking out old glass panes, complete all as specified and directed.

S & F Anodised aluminium frame for doors, windows, ventilators, with one or more rebates including joining cleat for fixing etc, complete all as specified and directed.

S & F Anodised aluminium frame powder coated (minimum thickness of powder coating 50 micron) for doors, windows ventilators with one or more rebates including joining cleat for fixing to partition including partion board in panel size of 2m x 1.5m each and fixing to floor and wall etc complete all as specified and directed.

S & F 5.5 mm thick sheet glass ordinary quality and glazing with aluminium snap beading in square and fixed to aluminium sections, all as specified and as directed.

S & F CP angle valve/stop valve of case copper alloy (ISI marked) chromium plated fency type screwed down high pressure with capstain head screwed both ends for iron pipe 15mm bore fixed in repair, complete all as specified and directed.

Brass CP mixer 15mm bore for mixing hot and cold water screwed down for iron pipe and fixed, complete all as specified and directed.

S & F PVC connection 15mm size with PTMT nuts with length 600mm long, complete all as specified and directed.

PVC grating round 100/125 mm size of PTMT and fixed in repair, complete all as specified and directed.

PVC valveles, symphonic action type, flushing cistern 10 Ltrs capacity low level, white with inlet, ball valve, float and handle or puch button type including bracket and in fixed in repair complete all as specified and directed.

Rotational moulded polyethylene (three layer) water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position of capacity 500 litres including dismantling existing water tank and making inlet/outlet washout connection with GI fittings fixed complete all as specified and directed.

All as per Item No.49 here in before but 1000 ltrs

Ball brass valves high pressure with polythene float and fly nut complete, screwed from iron pipe or brass ferrule 20mm complete all as specified and directed.

S & F Steel water tubes, medium grade, ISI marked, galvanised ( GI) 15 mm bore with all fittings, and fixing complited to wall and ceiling or laid in floor including taking down existing water tubing, complete all as specified and directed.

All as per Item No.52 here in before but 20mm

Mild steel , 300 mm, ordinary rat tail rod pattern door spring including roller and roller plate complete, all as specified.

S&F aluminium anodised handle extruded section with 150mm long bolt complete, all as specified .

S & F 300 mm long aluminium sliding door bolts clamps type (ISI marked) with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plates and two on staple plate, complete all as specified and directed.

S & F 125 mm aluminium anodised barrel tower bolt of extruded section and fixed, complete all as specified and directed.

S & F prepainted galvatume aluminium zinc coating GI based semi corrugated/profile steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof coveing/cladding to wall fixed with self tapping screws/L-type or J-type or cranked hook bolts in lieu of screw as per manufacturer instruction, complete all as specified and directed.

S & F prepainted galvatume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof coveing/cladding to wall fixed with self tapping screws/L-type or J-type or cranked hook bolts in lieu of screw as per manufacturer instruction, complete all as specified and directed.

18/19mm thick solid PVC board, prelaminated one side and other side palin, water proof, terminte proof as in cupboard shutters, partition walls and shelves fixed with frame complete all as specified and directed.

GI T Grid system in 600 x 600 mm module which includes providing and fixing wall angle along the perimeter of the room with nylon sleeves and wooden screws at 300 mm centre to center. Suspendeding the main tee of size from the soffit, soffit cleat, rawl plugs and wire rod & leveling spring clip at 1200mm center to center cross tee, interlockined into the pre-cut slots in the main tees at 600 mm centre to center in direction perpendicular to the main tee to make a grid of 600x 1200mm. Finally 600 mm cross tees are interlocked in the pre cut slots in the 1200mm tees at 1200 mm center to center in direction parallel to the main tee. Cross Tees having length more than 600 mm are to be supported independently. 12 mm thick aquesostic tile square edge of size 595x595 mm shall be placed into the grid size of 600x600mm. Size of T-Grid:- (a) Main T-24x32 thickness 0.3 mm and length 3600. (b) Cross T-24x25 thickness 0.3 mm and length 1200. (c) Cross T-24x25 thickness 0.3 mm and length 1600. (d) Wall angle - 24x24 thickness 0.4 mm and length 3000. Make : Gyproc Saint Gabin Gyproc/Everest.

25 mm dia aluminium anodised depreved rod powder coated teak wood texture finish and wall thickness 1mm with wooden brackets complete designed and pattern as approved by Engineer-in-charge.

wash down water closet with "P" or "S" trap vitreous china coloured including all fitting i.e seat cover, cistern super water saver dual, flush fixed including CP jet "as in repair", complete all as specified and directed.

Dismantling brick tiles or terracing tiles Single Layer on roof including cleaning the roof surface and filling the cracks (if observed) with silicon compound complete all as specified and directed.

50 mm thick PCC 1:2:4 type B-1 (using 20 mm graded crushed stone agg.) as in padding finishing even and smooth without using extra cement complete all as specified

Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq m including bitumen primer @ 3.5Kg/Sqm, complete all as specified and directed.

M & L for laying APP (atatic polypropline) modified membrane 3mm thick minimum weight not less than 3kg/sqm with 160 gsm/Sqm, non wove polister mat as centre core reinforced laid with 75mm side overlap and 100mm end overlap. The memberance has to be laid with LPG torch and over lap shield and finished neat over roof including a coat of bitumen 85/25 @ 1.2 Kg/Sqm over APP memberance complete all as specified and directed.

S & F Vitreous china half urinal bowl, flat back, size 465x355x265 white with grating and union for discharge pipe including waste pipe PVC connection (450mmx15mm) flushing pipe, complete all as specified and directed by Engr-in-Charge.

S & F Vitreous china wash basin, white, flat back, size 550X400 mm including waste pipe chain plugs and 32mm dia bore CP coupling including a pair of bracket, complete all as specified and directed.

S & F 15 mm pillar tap, cast copper alloy, fancy type with capstan heads, chromium plated, screwed down high pressure with and without levelled hot or cold with long screwed shanks and fly nuts screwed for pipe and fixed in repairs, complete all as specified and directed.

Dismantling cast-iron pipes/PVC waste including fitting taking out of trenches or walls as required dia of pipe upto 100mm, complete all as specified and directed.

M&L for 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floor, complete, all as specified.

PVC (SWR) Bends any radius for 110mm bore.

PVC(SWR) floor trap/gully trap with grating including jointing to waste pipe in solvent for 100mm bore including CP grating cover with or without hole,complete all as specified and directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or reinforced concrete) and set in cement mortar , complete all as specified and directed by Engr-in-Charge.

Excavation in trenches of any type of soil wide and n exc 1.5 m in depth; for foundation, etc. Or for shafts walls, cesspits , manholes pier holes etc not exceeding 10sqm on plan and not exceeding 1.5mm in depth and gatting, complete all as specified and directed.

Removing surplus soil to a distance not exceeding 50m and deposited where directed at a level not exceeding 1.50m from the starting point, complete all as specified and directed.

Returing filling, spreading and levelling watering and well raming in layers not exc 25 cm thick in soft/loose soil, complete all as specified.

M & L PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in sub base, complete all as specified and directed.

S & F 200mm dia reinforce concrete pipes, class NP-2 laid and jointed , complete all as specified and directed

M & L for walling of random rubble uncoursed well bonded,bedded and solidly hearted built in CM 1:6 complete all as specified and directed.

M&L for 60mm thick coloured cement concrete interlocking paver block, set, jointed and pointed with gery cement and coloured pigment to match the shade of tiles over and including 50mm thick sand coushion, complete all as specified and directed.

Deduction to be made from BOQ for schedule of credit (Sch 'A' Part - II) Amount of Rs. 46500.00 during AOC Note:- Tenderers shall not quote for this Schedule

U K Engineering Works

Hare krishna engineering const.

Kalsi Engineers and contractors

RAJINDRA ENGINEERS & CONTRACTORS

BHARTI CONSTRUCTIONS

M/s Pee Kay Enterprises

M/S OM GUPTA

M/S MANISHA BUILDERS