Construction of Govt. Degree College Haroli Distt. Una (HP) (SH- PITC of Fire Fighting Down Comer system therein)

Providing, fixing, testing and commissioning of MS air cushion tank on top of each riser fabricated form 8 mm thick MS plate, 250mm in diameter and 1.2 m in height with dished ends fabricated from 8mm thick MS plate with Air release valve with stop cock, flanged inlet connection and drain arrangement with 25mm dia valve, pressure gauge with gun metal stop cock, painting with synthetic enamel paint of approved shade as required complete with all accessories as required in all respect and to the best satisfaction of Engineer-In-Charge.

Providing, laying, jointing, testing and commissioning of following sizes of MS 'C' Class (Heavy duty) pipes conforming to IS-1239 with all fittings (standard MS fitting with welded joint shall be used on the pipes) including tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts, washer including supporting/fixing the pipe on floor / wall /ceiling with clamps, hangers (using anchor fastners) as per specification. including cutting holes and chases in brick, RCC work and making good the same to original conditions complete in all respects. All hangers, clamps, brackets etc. shall be of iron unless specified otherwise and then supply of the same shall also be included for rates under this head. Welding of any kind on the galvanized support / hanger shall not be permitted including synthetic enamel paint of approved shade over a coat of zinc primer.Prior to application of primer the surface should be cleaned dirt,rusts,rough substance etc. as required complete in all respects Make Jindal/B.S.T/Surya Tube/TATA/SAIL as approved by the Engineer-In-Charge.

Providing & Fixing of wall mounting swinging type first aid fire hose reel with drum, hanging bracket, 30 Mtr. length x 20 mm dia high pressure hose reel tubing as per IS: 444 with gun metal (GM) shut off nozzle having 5 mm dia orifice. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. The hose reel shall be conforming to IS : 884-1985 including include 25 mm dia M.S. pipe connection from Riser to hose reel, sockets, nipples, elbows and ball valve (25 mm dia). Drum shall be fixed on adjoining wall through anchor fasteners / cement concrete block as and when required complete in all respects Make:OMEX/ Newage/ Ceasefire/ Tyco/ Attackfire as approved by the Engineer-In-Charge.

Providing & fixing stainless steel fire hydrant single headed landing valve with 80 mm N.B. flanged inlet, SS spindle controlled 63 mm dia female instantaneous outlet type. SS coupling, cast iron wheel,blank cap, chain, twist release type lug & all accessories Conforming to IS IS 5290 (Type-A) standards as required complete in all respects Make:OMEX/ Newage/ Ceasefire/ Tyco/ Attackfire as approved by the Engineer-In-Charge.

Providing & Fixing of Stainless Steel (Grade 304) 63 mm dia 15 m long non-percolating flexible hose (RRL- type A) with 63mm S.S male & female instantaneous type coupling duly bound with Gl wire, rivets. etc. conforming to IS 636 (type-A) (For internal and External hydrant system) as required complete in all respects . Make:OMEX/ Newage/ Ceasefire/ Tyco/ Attackfire as approved by the Engineer-In-Charge.

Providing and Fixing Stainless Steel (Grade 304) 63 mm dia instantaneous pattern branch short pipe, 20 mm internal dia nozzle conforming to IS 903, suitable for inter connection to hose pipe coupling as required complete in all respects Make: OMEX/ Newage/ Ceasefire/ Tyco/ Attackfire as approved by the Engineer-In-Charge.

Providing & fixing Weather proof, fibre glass reinforced Fire Hose Cabinet ( 30"x24"x10") made of 18 SWG powder coated fibre sheet having single or double opening glazed (3.0 mm thick glass) shutter including necessary locking arrangement by allen key, stove enamelled Fire red finish (as per IS : 5, shade no. 536) with " Fire Hose" marked on front, suitable for housing 2 nos. 15m long 63 mm dia Hose pipe, 1 No. branch pipe & nozzle spanner as required complete in all respects . Make: OMEX/ Newage/ Ceasefire/ Tyco/ Attackfire as approved by the Engineer-In-Charge.

Providing & fixing Gunmetal Collecting head inlet connection to external hydrant ring/hydrant riser with two Nos. 63 mm dia instantaneous type inlet and 150 mm dia flanges outlet conforming to IS:904 with blank cap and chain. including necessary support complete in all respect Make: OMEX/ Newage/ Ceasefire/ Tyco/ Attackfire as approved by the Engineer-In-Charge.

Two Way

Providing and fixing Cast iron /steel Butterfly Valve Confirming to type P.N 1.6 rating of I.S 13095-1991 Complete with Flanges bolt, nuts, gasket etc. complete in all respect hydraulically test to 20 Kg./sqcm. as required complete in all respects Make:- Zoloto/Sant/Kartar/Kirloskar as approved by the Engineer-In-Charge.

100 mm Dia.

Providing and fixing Cast Iron dual plated Check Valve (NRV) horizontal type with gunmetal seat non-return valve confirming to class - I of IS : 5312 including nuts, bolts, 1.5 mm thick compressed asbestos gasket as required complete in all respects. Make:-Zoloto/Sant/Kartar/Kirloskar as approved by the Engineer-In-Charge.

100 mm dia.

Providing & Fixing of burden type Stainless Steel dial type pressure gauge with brass isolation valve and pipe of 100 mm dia with Caliberation: 0-20 Kg/cm2 as required along with complete accessories complete in all respects and to the best satisfaction of Engineer-in-charge. Make:- H Guru/Bell/ Fiebig/ System sensor as approved by the Engineer-In-Charge.

Supply, installation, testing and commissioning of Pressure switch for fire pumps of approved make,including necessary wiring and cut off/ ball valve up to control panel & other material as described in specifications. complete in all respect. Make:- Indfoss /System Sensor/ Danfoss as approved by Engineer-in-charge.

supply, Installing, testing and commissioning of 25mm dia gate valve with all accessories as requried. Make:- Zoloto/ Sant/Kartar/Kirloskar as approved by Engineer-in-charge.

Supply, installation, testing and commissioning of Terrace pump (pressurization pump) comprising of the following:

(A) Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump) (B) Horizontal type (450 LPM, 35mts Head),65MM Suction,40mm delivery multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS: 1520 (C) 7.5 HP,2900 RPM squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325. (D) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (E) Suitable cement concrete foundation duly plastered and with anti vibration pads., including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.Make:-Kirloskar/Grundfoss/ Siemens/ ABB as apprpoved by the Engineer-In-Charge.

Fabrication, supply, Insallation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, interconnection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required :

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheatthed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc.of the required size.Make :- Finolex/Plaza/Havells as approved by Engineer-in-charge.

Armoured cable 25 sq. mm ( 3.5 core)

Providing and fixing stored pressure vessel ABC 4Kgs. Powder type fire extingushers ISI mark. CE and EN Certfied,consisting of seamless cylindrical body, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube, 30cms long high pressure discharge hose, discharge nozzle, suspension bracket, confirming to IS: 15683 3A 55B finished externally with red enamel paint and fixed to wall with brackets complete with internal charge. Make :-OMEX/ Newage/ Ceasefire/ Tyco/ Attackfire as approved by the Engineer-In-Charge.

Providing and fixing Carbon dixoide CO2 4.5 kg type fire extingushers initial fill with CO2 gas confirming to IS:15222 filled to a filling ratio of not more than 0.667. Consisting of seamless cylindrical body, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube, 30cms long high pressure discharge hose of not less than 10 mm dia, discharge nozzle, suspension bracket, confirming to IS: 15683 finished externally with red enamel paint, fixed to wall with brackets and M S Wheel type complete with internal charge as required complete in all respects. CE and EN Certfied, ISI marked. Make :- OMEX/ Newage/ Ceasefire/ Tyco/ Attackfire as approved by the Engineer-In-Charge.

Providing and fixing Water 9 .Litrs type fire extingushers consisting of seamless cylindrical body, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube, 30cms long high pressure discharge hoase, discharge nozzle, suspension bracket, confirming to IS: 15683 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge. Make:- OMEX/ Newage/ Ceasefire/ Tyco/ Attackfire as approved by the Engineer-In-Charge.

Manual Fire Alarm System

Supply , Installation , testing and commissioning of semi recessed manual call point 220 V A.C. Painted red(BreakGlass unit) in 16 swg sheet M.S. housing complete with push button switch,chain and hammer includeing making making necessary connections as approved and directed by the Engineer in charge. Make:- Agni/Fireman/Ravel/Simens/Edwards as approved by the Engineer-In-Charge.

Supply , Installation , testing and Commissioning of wall mounted speakers suitable for public address system suitable for12/24 V D.C.,70-100V A.C.operation complete with includeing making making necessary connections as approved and directed by the Engineer in charge. Make :- Ahuja/ Panasonic/Agni /Ravel/Simens/Edwars as approved by the Engineer-In-Charge.

Supply , Installation , testing and commissioning of Microprocessor type 6 zone Fire Alarm main control panel having facility of fire indication,fault condition the system shall have in built public address system minimum 160 watt amplifier system with 160 watts minimum rms power and having mp3 playback feature with microphone .The main control panel wall mounted shall be make of 16 CRCA sheet double door with lock and key . The control shall have arrangement for inducal indicators dual lamp for fire and fault in each zone complete withback up power supply 2 nos batteries of 14 Ah 12 volt,50 Hz single phase AC main adequate for operation of system connected to it for 24 hours in the horizontal state followed by 30 minutes including making making necessary connections as approved and directed by the Engineer in charge. Make: Agni/ Fireman/ Ravel/Simens/Edwards as approvded by the Engineer-In-Charge.

Supplying and drawing following size of PVC insulated, heat resistant,flame retardant (HRFR) and low smoke single core (Flexible) copper conductor cable in existing surface/recessed .steel/PVC conduit as required.Make :-Plaza/FINOLEX/Anchor as approved by the Engineer - In- Charge.

2x1.5 Sqmm

Supplying and fixing of following sizes of heavy class FRLS PVC conduit having wall thickness 2.0 mm. along with the accessories in surface / recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required:- (Make :-BEC/Diplast/Polycab ) as approved by the Engineer - In- Charge.

Earthing with G.I earth pipe 4.5 mtr. long and 40mm dia, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but with charcoal or coke and salt ) complete as required.

Supplying and laying 6 SWG G.I. wire at 0.50 mtr. below ground level for earth electrode conductor, including soldering etc. as required.

Providing and fixing in position on terrace HDPE water storage tanks of approve (to the approval of Engineer-in-Charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes with complete fittings, MS angle support and base support for tank including cutting, boring, drilling, welding complete in all respect to the best satisfaction of the department). Also GI tank connection including all necessary accessories like union, nipple, socket etc.(Double Layer Tanks 5000 Itr each) Make: Sintex/ Vectus/supreme as approved by the Engineer - In- Charge.

Suppling and installation following Size of Perforated Hot Dipped Galvanised iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5% in convenient sections, joined with connectors, suspended from the celling with G.I suspenders including G.I bolts & nuts,etc as required. 225 mm width X 50 mm depth X 1.6 m Thickness

Please Enable Macros to View BoQ information