Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.7 LAccepted-AOC R O IQBAL MARKET AALI MAJID EIDGAH SRINAGAR KASHMIR | SRINAGAR | JAMMU AND KASHMIR | 190001 | L1 | Accepted-AOC Accepted Being L1 | |
| 2 | L2₹1.9 L+₹20,800 (12.3%)Rejected-Finance | L2 | Rejected-Finance Other Than L1 |
Tender Value
₹2.8 L
EMD Value
₹5,500
Closing Date
27 Jun 2022, 6:00 pmClosed
AGE (I) CIF (K)
AGE (I) CIF (K) SHALATENG
REPAIR AND MAINTENANCE TO GEYSERS, CEILING FANS, EXHAUST FANS ETC, IN CERTAIN BUILDINGS AND ACs, REFGS AND OTHER CONNECTED WORKS AT 10 SECT RR AND 29 RR AT PATTAN GARRISON UNDER AGE (I) CIF (K).
2022_MES_527389_1
CA NO. AGE (I) CIF (K) - 39/2022-23
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
SHALATENG
AS PER NIT AND TENDER DOCUMENTS
9 documents required · 9 mandatory
₹300
AGE (I) CIF (K)
₹5,500
Yes
30 Jun 2022
30 May 2022
29 Jun 2022
30 May 2022
27 Jun 2022
13 Jun 2022
Amount
Dismantling of Ceiling fan 1200 mm dia sweep (any make and type ) taking out rotor removing all coils (burnt and alive) rewinding all the coils with suitable size super enamelled copper wire (Make- DEVIDYAL/HINDUSTAN (ISI MARKED) including all packing material insulating materials, varnishing, greasing, connector assy for capacitor,re-assembling, testing on full speed, complete all as specified and as directed by the Engineer-in-Charge.
Description all as per serial item No 01 here-in-before, butfor Wall Mounting Fans 380 mm sweep, complete all as specified and as directed by the Engineer-in-Charge.
Taking down carefully Ceiling/Exhaust/wall mounted fans any sweep and make for overhauling including dismantling of blade frame and opening and examining motor cleaning of dust/dirt of fan cleaning and greasing of ball bearing and bushes with fresh oil and best quality of grease vrespectively and re-assembling of complete fan after re-fixing parts in its original position and hanging hanging,testing and testing fan for smooth functioining incl replacement of rubber seal insulator and painting one coat of synthetic enamel paint with spray painting machine & marking MES No with Black paint, complete all as specified and as directed by the Engineer-in-Charge.
Supply and fixing in replacement down rod for ceiling fans 1200 mm sweep made out of MS Pipe medium grade 15 mm bore 12'' long,threaded and holes drilled duly powder coated, complete all as specified and as directed by the Engineer-in-Charge.
Supply and fixing in replacement Fan Condenser/Capacitor 2.5/3.15 mfd suitable for 240 Volts etc., complete all as specified and as directed by the Engineer-in-Charge.
Supply and fixing in replacement ball bearing of ceiling fan (Size 48'/56'/60') exactly similar as existing in fans, complete all as specified and as directed by the Engineer-in-Charge. Make:NBC/SKF
PVC insulated sheathed white colour three core copper flexible cable of size 23/.0076, complete all as specified and as directed by the Engineer-in-Charge.
Supply and fixing in replacement plug Top 15 Amp for geyser 25/50litre, complete all as specified and as directed by the Engineer-in-Charge.
Ceiling Fan complete with blades ,down rods,electronic regulator and accessories 230 V,1400 mm sweep with Min Air Delivery 245 CFM with service value 6.00 BEE Five star rated with brushless direct current motor (BLDC), complete all as specified and as directed by the Engineer-in-Charge.
Taking Down fan sealing cable end, dismantling blade and removing fan and blade to store, complete all as specified and as directed by the Engineer-in-Charge.
Supply and fixing in replacement Exhaust Fan AC exhaust,steel body AC single phase,230 V of size 380 mm with blades ,and frame and louvers including taking down existing, complete all as specified and as directed by the Engineer-in-Charge.
Supply and fixing in replacement Heating Element of the following sizes, complete all as specified and as directed by the Engineer-in-Charge. :-
Supply and fixing in replacement of thermostat switch 230 Volt, 50 Cycles AC suitable for geysers of any capacity as per existing make, complete all as specified and as directed by the Engineer-in-Charge.
Supply only Fibre reinforced PVC nylon pipe (Flexi Connection pipe) heavy duty size 450 mm long 15 mm bore with brass coupling plated with rubber washers at both ends as per IS, complete all as specified and as directed by the Engineer-in-Charge.
Supply and fixing in replacement Base Assembly (Separator) suitable for 25/50 litre capacity of geyser as per existing make,size and type with holding clamp with nut bolt and washer and rubber gasket for element and thermostat and other accessories as required at site etc., complete all as specified and as directed by the Engineer-in-Charge.
Painting of geyser 25/50 litres after scraping, cleaning, knotting and stopping including preparation of surface of geyser and rubbing with ammery paper for painting with one coat of duco paint by spray painting machine to achieve glossy finish of approved make first quality and re-write MES No on the body of geyser with Synthetic enamel paint (Letters and Figures 2 cm High), complete all as specified and as directed by the Engineer-in-Charge.
Supply only indicator lamp as per existing shape and size suitable for 25/50 litres capacity of geyser etc., complete all as specified and as directed by the Engineer-in-Charge.
Supply and fixing in replacement heavy duty pin type fastener 2'' long (GI nuts,bolts and washers off sizes) suitable for any capacity geyser as required at site, complete all as specified and as directed by the Engineer-in-Charge.
Supply and fixing in replacement heavy duty pin type fastener 4'' long(GI nuts,bolts and washers off sizes) suitable for any capacity geyser as required at site., complete all as specified as directed by the Engineer-in-Charge.
Supply and fixing electric water heater storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre , BEE 5 Star Rated complete with all accessories such as safety valve, thermostat, NRV, connection Piece etc. complete all as specified and as directed by the Engineer-in-Charge.
Description all as per serial item No 20 here-in-before, but of capacity 5 litres, complete all as specified and as directed by the Engineer-in-Charge.
Description all as per serial item No 20 here-in-before, but of capacity 3 litres, complete all as specified and as directed by the Engineer-in-Charge.
Disconnecting electrical connection and taken out to inspect the defect of refrigerator of capacity 165 to 280 litre including cleaning,greasing,oiling of required parts etc. and reinstalling the same after repair and testing the unit, complete all as specified and as directed by the Engineer-in-Charge
Supply and fixing in replacement of compressor sealed unit for refrigerator of capacity 165 to 220 Litre with copper strainer and including , supplying and charging of gas with necessary welding/soldering for leak proof as required and commisioning,testing, complete all as specified and as directed by the Engineer-in-Charge Make:Kirloskar/Tecumesh
Description all as per serial item No 24 here-in-before, but of capacity 280/320Ltrs , complete all as specified and as directed by the Engineer-in-Charge. Make:Kirloskar/Tecumesh
Supply and fixing in replacement of freezer with door frame of refrigerator capacity 165 to 220 litres, complete all as specified and as directed by the Engineer-in-Charge.
Supply and fixing in replacement of freezer with door frame of refrigerator capacity 286 to 320 litres, complete all as specified and as directed by the Engineer-in-Charge.
Supply and fixing in replacement starting box type relay 1/6 HP for refrigerator, complete all as specified and as directed by the Engineer-in-Charge.
Supply and fixing in replacement overload protector 1/6 HP for refrigerator, complete all as specified and as directed by the Engineer-in-Charge.
Supply and charging refrigerant gas in the refrigerator including satisfactory leak test and vacuum test of capacity 165 to 220 Litre including replacement of copper strainer and necessary welding work, complete all as specified and as directed by the Engineer-in-Charge.
Supply and charging refrigerant gas in the refrigerator including satisfactory leak test and vacuum test of capacity 286 to 320 Litre including replacement of copper strainer and necessary welding work, complete all as specified and as directed by the Engineer-in-Charge.
Supply and fixing in replacement thermostatic switch for refrigerator of any size, complete all as specified and as directed by the Engineer-in-Charge. Make -IND FOSS/RENUTRAL/HITECH
Supply and fixing in replacement door gaskets of refrigerator 165 to 310 litres , complete all as specified and as directed by the Engineer-in-Charge.
Supply and fixing in replacement fan motor of freezer of refrigerator 165 to 320 litres , complete all as specified and as directed by the Engineer-in-Charge.
Rewiring with copper enamelled wire as per existing gauge of transformer assemby of Voltage stabilizer of capacity upto 1 KVA, complete all as specified and as directed by the Engineer-in-Charge.
Description all as per serial item No 35 here-in-before, but of capacity 2 KVA , complete all as specified and as directed by the Engineer-in-Charge.
Description all as per serial item No 35 here-in-before, but of capacity 4 KVA , complete all as specified and as directed by the Engineer-in-Charge.
Description all as per serial item No 35 here-in-before, but of capacity 5/6 KVA , complete all as specified and as directed by the Engineer-in-Charge.
Supply and replacement of compressor sealed unit for Deep Freezer of size 165 to 220 Litre capacity with copper strainer and including ,supplying and charging of gas with necessary welding/soldering for leak proof as required and commisioning,testing, complete all as specified and as directed by the Engineer-in-Charge. Make:Kirloskar/Tecumesh
Supply and fixing in replacement the body of Deep Freezer of capacity upto 210 litres, complete all as specified and as directed by the Engineer-in-Charge.
Supply and charging refrigerant gas in the Deep Freezer including satisfactory leak test and vacuum test of capacity upto 220 Litre including replacement of copper strainer and necessary welding work, complete all as specified and as directed by the Engineer-in-Charge.
Note :- An amount of Rs.14,442.00 on account of credit schdule for Sch 'A' Part-II Shall be deducted from the total amount of BOQ to arrive at the contract sum.
M/S ZAHOOR ENTERPRISES
stage.html
html • 0.04 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .