Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.5 LAccepted-AOC 1 225 5 6 SADAR BAZAR DELHI CANTT 110010 | NEW DELHI | DELHI | 110010 | L1 | Accepted-AOC Being L1 Bidder | |
| 2 | L2₹40.5 L+₹4.6 L (12.7%)Rejected-AOC | L2 | Rejected-AOC Not L1 Bidder | |
| 3 | L3₹41.9 L+₹6.0 L (16.7%)Rejected-AOC | L3 | Rejected-AOC Not L1 Bidder | |
| 4 | L4₹47.3 L+₹11.3 L (31.6%)Rejected-AOC | L4 | Rejected-AOC Not L1 Bidder | |
| 5 | L5₹48.9 L+₹12.9 L (36.0%)Rejected-AOC 0001 000 KACHARI ROAD RAMAIPATTI MIRZAPUR UTTAR PRADESH 231001 | MIRZAPUR | UTTAR PRADESH | 231001 | L5 | Rejected-AOC Not L1 Bidder |
Tender Value
₹49.4 L
EMD Value
₹98,840
Closing Date
13 Nov 2023, 6:00 pmClosed
GE(U) WATER SUPPLY
GE(U) WATER SUPPLY DELHI CANTT-110010
PETTY REPAIR FOR ATTENDING DAY TO DAY EXTERNAL WATER SUPPLY COMPLAINTS INCLUDING MOUDE ROAD AREA, ARJUN VIHAR, CARRIAPPA VIHAR AREA, PRATAP CHOWK, KHYBER LINE, MANEKSHAW CENTRE PUMP HOUSE, BAIRD PLACE AND ALLIED AREA IN THE AREA OF AGE (U) WS NO -II
2023_MES_622130_1
GE/WS/IFA- /Token - 26 OF 2023-24
Open Tender
Civil Works
Item Rate
330 days
GE(U) WATER SUPPLY
AS PER NIT AND TENDER CONDITIONS
6 documents required · 6 mandatory
₹500
₹98,840
Yes
27 Jan 2024
9 Oct 2023
15 Nov 2023
9 Oct 2023
13 Nov 2023
28 Oct 2023
Amount
Labour only for attending day to day external/treated water supply complaints of all nature including grey water pipe leakage i.e leakage in water supply pipe lines , fitting/fixture, over flow of overhead tank, no water supply in supply tank/direct kitchen tap and grey water supply in graden area and AEPTA landscaping area of Golf Course. Taking out water from trenches during repair including note down the complaints in complaint register complete all as specified and as directed. (Any material required for attending complaints shall be measured and paid separately under respective item herein after)
Labour only for attending of Electric supply compliants of day to day maintenace of existing LT Panels including connecting electrical accessories / spares of water supply installation, borewell and electrical fitting & light, short circuits in Pump house complete all as specified and as directed. (Any material required for attending complaints shall be measured & paid separately under respectvie item hereinafter)
Notes for item No. 1.00 & 2.00 (i) The complaints shall be attended and the defects shall be rectified by a team of expert and experienced electrician/plumber as applicable assisted with adequate No of helpers complete all as specified and as directed. (ii) The complaints shall be attended and defect shall be rectified within 04 hrs commencing from date and time of notifying the complaint failing which a penalty @ Rs 250/- per complaint per day (08 hrs) shall be levied upon/imposed on the contractor and recovery shall be made from contractor's dues. Contractor shall appoint suitable staff for receive and register of complaints received in person/through telephone/mobile and issue and control contractors stores and be available wef 0800 hrs to 2000 Hrs to receive and notify the complained
(iii) In case, after checking and attending the defect, it is not possible to rectify the defects within 08 hrs the facts shall be brought to the notice of Engineer-in -charge by the contractor /his rep . If Engineer -in-charge is satisfied with contractors view, no recovery will be made. (iv) while attending the complaint of water supply /Electric supply if earth work is required then the same shall be measured and paid seperately under appropriate item of Sch 'A' . However no extra payments shall be made for dewatering. (v) Cutting of GI pipe in position and threading is also deemed to be included in the job rate (Fitting and fixtures will be measured and paid separetely under respective item of Sch A.
(vi) All T & P including safety gears required for attending the complaints shall be provided by the contracor. (viii) The elecrician shall always be in possession of all Electrician tools , LT Megger, Earth tester , Multimeter , Crimping tool, insulation tape, Hand gloves etc required at site. (ix) Old retrived unserviceable materials, if any, will be the Contractor's property and necessary credit shall be offered by the contractor.
S & F in replacement GI Socket medium grade ISI Marked of following sizes ;-
15 mm bore
20 mm bore
25 mm bore
40 mm bore
50 mm bore
S & F in replacemet GI Elbow Medium grade ISI Marked of following sizes : -
15 mm bore
20 mm bore
25 mm bore
40 mm bore
50mm bore
S & F in replacement GI Union Medium Grade ,ISI marked of following Sizes:-
15 mm bore
20 mm bore
25 mm bore
40 mm bore
50 mm bore
S & F in replacement GI Nipple of different length as per requirement, both end screwed Medium Grade, ISI marked of following sizes:-
15 mm bore
20 mm bore
25 mm bore
40mm bore
50mm bore
S & F in replacement PVC 'L' type Holder suitable for Aluminium rod,Float Ball etc all as required at site and complete all as specified and as directed of following Sizes:-
15 mm bore
20 mm bore
25 mm bore
S & F in replacement GI Reducing socket medium grade ISI marked of the following sizes :-
25 mmx15mm bore
20mmx15mm bore
25 mm x 20 mm bore
50 mmx 40mm bore
40 mmx 20mm bore
40 mmx 25mm bore
50mmx 25mm bore
40mmx 32mm bore
S & F in replacement GI Tee Med grade ISI Marked of following sizes : -
15mm x15mm x15mm
20 mm x 20 mm x 15 mm
20 mm x 20 mm x 20 mm
25 mm x 25 mm x 25 mm
25 mm x 25 mm x 15 mm
25 mm x 25 mm x 20 mm
32 mm x 32 mm x 32 mm
40 mm x 40 mm x 40 mm
40 mm x 40 mm x 20 mm
40 mm x 40 mm x 25 mm
50 mm x 50 mm x 50 mm
50 mm x 50 mm x 25 mm
50 mm x 50 mm x 20 mm
50 mm x 50 mm x 40 mm
S & F in replacement GI solid plug heavy duty ISI marked of following sizes
15mm bore
20 mm bore
25 mm bore
40 mm bore
50 mm bore
60 mm bore
Supply only Lead pig bar , complete all as specified and directed.
Supply only spun yarn complete all as specified and directed.
Supply only lead wool complete all as specified and directed.
Supply only gland packing complete all as specified and directed
Supply only 3 mm thick rubber Gaskets suitable for any size of flanges upto 200 mm dia, complete all as specified and directed
S & F in replacement PTMT float valve with epoxy coated aluminium rod and high density plastic ball of following sizes complete all as specified and as directed
15mm bore
20 mm bore
25 mm bore
40 mm bore
50 mm bore
S & F in replacement Gun metal air release valve, 25 mm bore as per IS complete all as specified and directed
S & F in replacement Tank Nipple suitable for HDPE water tank 20 mm dia, complete all as specified and directed
S & F in replacement 15 mm bore Ball Valve of PTMT any colour high pressure screwed for male/ female treaded, for UPVC pipe of size 15mm bore complete all as specified and directed
S & F in replacement 20 mm bore Ball Valve of PTMT any colour high pressure screwed for male/ female treaded, for UPVC pipe of size 15mm bore complete all as specified and directed
S&F in replacement of old gun metal gate valves with iron wheel head screwed both ends for iron pipe , ISI marked , as per IS : 778 of following sizes complete all as specified and directed
15mm bore
20 mm bore
25 mm bore
40 mm bore
50 mm bore
Testing of drinking water collected from local source (bore wells /shallow wells in the area of AGE(U) W/S No.II and submission of detailed test report to the office of Engineer-in-Charge. (i) Carrying out minimum essential testing of water as per IS 10500-2012 mandatory for chemical colour, odour, taste, turbidity, pH value, TDS total hardness, iron, chloride, fluoride and residual free chlorine and Bacteriological total coliform organisms per 100 ml (MPN) and E Coli in 100 ml) with specific recommendation regarding suitability of water for drinking purposes. (ii) Collection of water from[ different sources of water ie. Sump, bore wells & shallow well in a sterilized bottle and testing in NABL Approved laboratory as mentioned in specification
Note 1:- Rate Quoted shall also deemed to be included for the followings:- (i) Cost of sterilized bottle as required. (ii) To and fro transportation charges for collection of samples from source (sump, bore & shallow wells) Note 2:- Test reports so collected will be submitted to the Engr-in-Charge every month and failing to which will attaract a penaly of ₹5000/- per report and will be recovered from his RARs/Bills
Excavation in trenches not exc. 1.5 mtr wide and not exc 1.5 mtr deep for pipe line in any type of soil, getting out and levelling of bottom surface to required complete all as specified and directed.
Returning filling, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed.
Removing excavated material from site to a distance not exc 50 m away and depositing where directed not exc 1.5 meters above the starting point complete all as specified and directed.
Surface dressing of uneven surfaces of the natural ground, rough excavated surfaces and filled area where ordered shall be trimmed to an even surface horizontal or slopping, by removing vegetation and by scrapping high patches and filling low patches with the scrapping soil to give an even and neat look to the site. depth of cutting not exceeding 15 cm complete all as specified and directed.
S & F in replacement 15 mm bore Bib tap in replacement of old standard of PTMT any colour high pressure screwed for male/ female treaded, for UPVC pipe of size 15mm bore complete all as specified and directed
S & F in replacement of 20 mm bore Bib tap in replacement of old standard of PTMT any colour high pressure screwed for male/ female threaded, for UPVC pipe of size 20mm bore complete all as specified and as directed
Labour work required for taking out suction pipe 80 mm to 200 mm bore from sump of any capacity, dismantling of foot valve screwed / flanged type, and relowering after refixing in position the same duly cleaned / minor repair if any required such as replacement of rubber gasket/ lifting bolts & nuts including making thread for the suction pipes off sizes etc complete all as specified and directed.
S & F in replacement of old 'stem' made out from SS (all as per sample) of sluice valve of size as under : -
50 mm bore
80 mm bore
100 mm bore
150 mm bore
250 mm bore
300 mm bore
S & F Nuts bolts and washers 25 to 150 mm long of 6 to 20 mm dia, complete all as specified and directed
S & F in replacement of old worn out 'gland plate' made out CI, suitable to match with existing sluice valve of sizes as under : -
80 mm bore
100 mm bore
150 mm bore
200 mm bore
Supply & Fixing triple layered rotational moulded Poly-ethylene water storage tanks (cylindrical vertical with closed top) of cap 500 Ltrs hoisted and fixed in position at building top.
All as item 34 above, but capacity of 1000 Ltrs PVC water storage tank
Taking up or down GI Pipes with connection including cleaning for removal complete all as specified and as directed of the follwing sizes :-
15 mm dia
20 mm dia
25 mm dia
40 mm dia
50 mm dia
80 mm dia
Relaying/refixing jointing and testing of old GI pipes with new GI fittings such as bends,elbows,tees etcincluding cleaning completely in trenches complete all as specified and directed of following sizes :-
15 mm dia
20 mm dia
25 mm dia
40 mm dia
50 mm dia
80 mm dia
Supply and fixing GI pipe medium grade ISI marked including all fittings in old/new position as in walls,ceilling and roof complete all as specified and directed following sizes :-
15 mm dia
20 mm dia
25 mm dia
40 mm dia
50 mm dia
80 mm dia
Supply and fixing of GI pipe medium grade ISI marked including all fittings in old/new position as in trenches complete all as specified and directed of following sizes :-
15 mm dia
20 mm dia
25 mm dia
40 mm dia
50 mm dia
80 mm dia
Labour for cutting and screwing existing steel tubing for alteration or addition complete all as specified and as directed of the following sizes :-
15 mm bore
20 mm bore
25 mm bore
40 mm bore
50 mm bore
S & F in replacement of old worn out/broken cast iron/ DI fitting for flanged /spigot and socketed pipes such as bends, reducer, tee pieces, tail pieces, collar, cross , caps & plug upto 150mm bore
Taking up or down old UNSV Cast Iron pipes with socket and spigot ends and putting/filling lead/tyton joints including burning out old lead joints and recovering lead complete all as specified and directed for the following sizes
80 mm bore
100 mm bore
150 mm bore
200 mm bore and above.
Relaying /Refixing only in trenches old CI/DI pipes with socket and spigot ends, after cleaning thoroughly and removal of all blockages if any complete all as specifiedof pipe CI/DI pipes after cleaning from inside with suitable chemical and rodding complete all as specified and directed of following dia :-
80 mm bore
100 mm bore
150 mm bore
200 mm bore and above.
Supplying ,laying ,jointing, testing and commissioning in replacement of old Cement pipe/ DI pipe as per IS 8239 class K-7 with in side cement mortar lining with spigot and socketed end laid in trenches complete with rubber gasket joint complete all as specified and directed at site for the following sizes:-
80 mm bore
100 mm bore
150 mm bore
200 mm bore
Taking out of Old UPVC /HDPE pipes of any rating laid in trenches complete all as specified and directed by Engr in charge.
15mm bore
20 mm bore
25 mm bore
40 mm bore
50 mm bore
80 mm bore
100 mm bore
Relaying of UPVC/HDPE pipes of any type of following size
15mm bore
20 mm bore
25 mm bore
40 mm bore
50 mm bore
80mm bore
100 mm bore
S & F in replacement UPVC/PPR Pipes of pressure rating 10 kgf/cm2 of following size
15mm bore
20 mm bore
25 mm bore
40 mm bore
50 mm bore
80 mm bore
100 mm bore
Making connection of PP-R/UPVC/HDPE distribution branch with main of following sizes by providing and fixing tee including cutting and making fusion joint etc Note:- The contractor will arrange butt jointing machine and the rates quoted will include all to and from transportation cost.
16 to 40mm dia.
Supply and fixing in replacement UPVC/PPR Socket ISI Marked of following sizes : -
15 mm bore
20 mm bore
25 mm bore
40mm bore
50mm bore
80 mm bore
100 mm bore
Supply and fixing in replacementy UPVC/PPR Elbow ISI Marked of following sizes : -
15 mm bore
20 mm bore
25 mm bore
40mm bore
50mm bore
80 mm bore
100 mm bore
Supply and fixing in replacementy UPVC/PPR Union ISI Marked of following sizes : -
15 mm bore
20 mm bore
25 mm bore
40mm bore
50mm bore
80 mm bore
100 mm bore
Supply and fixing in replacement UPVC/PPR reducing socket ISI Marked of following sizes : -
25 x15 mm bore
20 x 15 mm bore
25 x 20 mm bore
50 x 40mm bore
80x 50 mm bore
Supply and fixing in replacement mild steel work for manhole cover, stair case steps made of MS angle/ flats/channels etc including cutting out top and bottom to shape as directed, drilling holes, notching for wire etc flat iron fillets including all necessary drilling, bolting or rivetting etc and similar works confirming to Fe-290, Gde E-165 and applying two coats of synthetic enamel paint over a coat of red oxide primer including preperation after demolition of existing covers,steps etc complete all as specified and directed.
S & F in replacement SS made 25 mm to 150 mm long, 6 to 20 mm diameter Hexagonal nuts, bolts and washers/spring washers complete all as specified and as directed
Supply, fixing, jointing & testing Cast Iron Sluice Valve of sizes in replacement as under, ISI Marked, flanged ends drilled pressure rating PN-1.0 PD Short body, confirming to IS 14846-2000, having stainless steel spindle with cast iron operation wheel at top including taking out UNSV Sluice Valve complete all as specified and directed. Note:- Flanged joints complete with jointing material including replacement of SS Hexagonal nuts, bolts and washers of suitable size including replacement of flange gasket of suitable thickness shall deemed to be included in the units rate of this item
50 mm bore
80 mm bore
100 mm bore
150 mm bore
200 mm bore
250 mm bore
300 mm bore
Supply, fixing, jointing & testing in replacement Cast Iron Non Return Valve without by pass arrangement, swing type confirming to IS 5312, flanged ends pressure reating PN1.0 complete including taking out unsv NRV complete all as specified and directed. Note:- Flanged joints complete with jointing material including replacement of SS Hexagonal nuts, bolts and washers of suitable size including replacement of flange gasket of suitable thickness shall deemed to be included in the units rate of this item
80 mm bore
100 mm bore
150 mm bore
200 mm bore
Supply, fixing, jointing & testing Cast Iron Foot Valve in replacement flanged ends, swing type operation with rubber sheet confirming to IS 4038 complete including taking out unsv Foot Valve complete all as specified and as directed. Note:- Flanged joints complete with jointing material including replacement of SS Hexagonal nuts, bolts and washers of suitable size including replacement of flange gasket of suitable thickness shall deemed to be included in the units rate of this item
80 mm bore
100 mm bore
150 mm bore
250 mm bore
Supply, installation & testing of flanged ends Water Meter in replacement ISI marked woltman type, class 'B' of following sized and making good connection with flanged ends,with rubber sheet gasket and nuts & bolts fixing in horizontal/inclind/verticle position, including taking out UNSV water meter complete all as specified and as directed. type operation with rubber sheet confirming to IS 4038 complete including taking out unsv Foot Valve complete all as specified and as directed. Note:- Flanged joints complete with jointing material including replacement of SS Hexagonal nuts, bolts and washers of suitable size including replacement of flange gasket of suitable thickness shall deemed to be included in the units rate of this item
50 mm bore
80 mm bore
100 mm bore
150 mm bore
250 mm bore
Material & Labour for two coats of synthetic enamel paint on old steel surface as per existing colour scheme or pattern complete all as specified and directed
Supply only Multipurpose grease lubricant for Motors and Pumps in sealed container.
Taking out existing LT UG XLPE cable laid in trenches/fixed to poles etc of following sizes Note : Earth work excavation will be measured and paid seperately under relevant items)
Crossectional area 16 Sqmm x 4 core
Crossectional area 25 Sqmm x 3.5 core
Crossectional area 35 Sqmm x 3.5 core
Crossectional area 50 Sqmm x 3.5 core
Relaying /relaying of old existing LT UG XLPE cable laid in trenches/fixed to poles same after connected repair works cable of following sizes Note : Earth work excavation will be measured and paid seperately under relevant items)
Crossectional area 16 Sqmm x 4 core
Crossectional area 25 Sqmm x 3.5 core
Crossectional area 35 Sqmm x 3.5 core
Crossectional area 50 Sqmm x 3.5 core
Supply and fixing in replacement of XLPE insulated, armoured heavy duty electric cables with aluminium conductor, 1100 volts grade, cross sectional area 16 sqmm, 4 core complete all as specified and as directed
Supply and fixing in replacement of XLPE insulated, armoured heavy duty electric cables with aluminium conductor, 1100 volts grade, cross sectional area 25 sqmm, 3.5 core complete all as specified and directed
Supply and fixing in replacement of XLPE insulated, armoured heavy duty electric cables with aluminium conductor, 1100 volts grade, cross sectional area 35 sqmm, 3.5 core complete all as specified and as directed
Supply and fixing in replacement of XLPE insulated, armoured heavy duty electric cables with aluminium conductor, 1100 volts grade, cross sectional area 50 sqmm, 3.5 core complete all as specified and as directed
Labour only for laying existing burnt bricks sub class 'B' old size laid in trenches with equal to length of bricks across the cable for cable protection complete all as specified and as directed NOTE: Old bricks shall be used in laying of cushioning of cables.
Supply and spread clean dry river sand to required width at bottom and top for cable cushioning complete all as specified and directed NOTE: Punned depth shall be measured and paid.
Material and Labour Burnt bricks sub class 'B' old size laid in trenches with equal to length of bricks across the cable for cable protection complete all as specified and as directed
Repair/maintenance of juction box/pole box as per site including serviceable of bus bar, MCB & changing of cable or make it serviceable condition complete all as specified and directed.
Supply &Fixing in replacement elecrtonic timer type ST 100 for fixing in panel complete all as specified and as directed
Supply & fixing in replacement of Fully automatic Star-Delta Starter with sheet metal enclosure ML 1.5
Supply only in replacement of 3 pole power contactor Type MNX 25, 110 Amp ,415/220 volts ,50 hz coil voltage 415 volt
Supply only in replacement of 3 pole power contactor Type MNX 32, 110 Amp ,415/220 volts ,50 hz coil voltage 415 volt
Supply only in replacement of thermal over load relay type MN relay range 28-42 Amps
Supply only in replacement of thermal over load relay type MN relay range 20-32 Amps
Supply only in replacement of thermal over load relay type MN relay range 13-21 Amps
Supply and fixing in replacement LED batten arrow for multi application suitable for 18 watts with & including necessary cable connection to make it functional complete all as specified and as directed
Earthing complete Iin replacement with galvanised steel earth plate electrode 600 x 600 6 mm thick burried directly in ground not less than 2.25 mtr deep below normal ground level with top edge of earth plate not less than 1.5 mtr below normal ground level connected to the Galvanised iron strip 32 x 6 mm size by means of bolts, nuts, check nuts and washers of galvanised iron and 32 x 6 mm GI strip procted by provision of GI light grade pipe 40 mm bore including provision of concrete pit in PCC 1: 2: 4 type B-1, using 20 mm graded stone aggregates with 40 mm thick cover of RCC (1:2:4) reinforced with XPM weight not less than 4 kg/sqm and 6 mm dia bar handle, excavation and earth work in any type of soil, charcoal dust and salt light grade GI watering pipe 20 mm bore with funnel and wire mashe and medium GI protection pipe 15 mm bore 5 Mtr long and GI strip upto main earthing of pole complete all as shown in electrical plate No 3 of MES Sch 2009 Part-I complete all as specified and as directed.
Note:- 1. Main Earthing strip from earth plate electrode to test point upto length of 7.t meters shall deemed to be included in the unit rate quoted against this items. 2. On testing after completion of the earthing work if the desired resistenance is not obtained, the contractor shall redo the the complete earth work without any extra cost to the department.
Taking down old unserviceable point wiring from existing conduit (light, fan, socket or power) complete such as switches, ceiling roses, pendent holder and socket etc and removing the material from site and making good the distrbed surface of wall/floor/ceiling etc complete all as specified and directed.
Material and labour for point wiring complete with 1.5 sqmm (nominal crossectional area) FRLS PVC insulated unsheathed and stranded copper conductor cable ISI marked and including PVC concealed conduit ISI marked of size 20 mm dia medium grade and PVC conduit fittings such as tees, bends, elbows, reducers except conduit junction box (Junction box will be of MS) including FRLS PVC insulated unsheathed 1.5 sqmm copper earth wire, connecting to common earth dolly and including metal flush box of suitable size for fixing modular switches/sockets/fan regulators etc complete all as specified and directed for the following:- Note:- The cost of modular type Metal Boxes and modular accessories like cover plates will be included in quoted rates)
One light point/fan point/exhaust fan point/circulator fan point/bell/buzzer controlled by one 1 way switch/bell push etc.
One socket outlet point 5 Amps on the same board
One socket outlet point 5 Amps on the independent board
3 pin socket outlet 15 Amp, independent with 4 sqmm copper FRLS wire.
Supply & fixing in replacement of switch piano, flush type single pole 1 way, 5/6 Apms complete all as specified and directed.
Supply and fixing in replacement of swithc Piano flush type single pole 1 way 15 Amps complete all as specified and directed.
Supply and fixing in replacment of socket outlet 6 Amp 2 in 1,3 pin complete all as specified and directed.
Supply and fixing in replacment of socket outlet 16 Amp 2 in 1, complete all as specified and directed.
Supply and fixing in replacement of Fan regulator step type complete all as specified and directed.
Supply and fixing in replacement of Ceiling rose, surface bakelite, 3 terminal, 240 volts, 5 Apms complete all as specified and directed.
S & F in replacement for fixing MCCB's following sizes in existing/new location complete all as completed.
MCCB 63 Amps 3 Pole 16 KA
MCCB 100 Amps 3 Pole 16 KA
MCCB 125 Amps 3 Pole 16 KA
MCCB 160 Amps 3 Pole 36 KA
MCCB 200 Amps 3 Pole 36 KA
MCCB 250 Amps 3 Pole 36 KA
Supply, Laying & fixing in replacement of MS Pipe (Heavy class 'C') followiing sizes laid in trenches or in Horizontal/Vertical/inclined position or laying on floors for connections for suction, to header and connected to out going water main CI/DI pipe line, for following sizes including taking out the old unserviceable pipes :- Note:- MS Flanges will be measured and paid separately.
80 mm dia
100 mm dia
150 mm dia
200 mm dia
250 mm dia
350 mm dia
Supply and fixing MS flange, 16mm thick duly welded with flange joint including nuts bolts, washer, rubber or fiber board gasket joint of following sizes :-
80 mm dia
100 mm dia
150 mm dia
200 mm dia
250 mm dia
350 mm dia
M&L applying distemper on walls with oil bound distemper including washing rubbing down, filling of cracks withbirla care putty, including necessary scaffolding work etc. complete all as specified and directed
M&L applying two coat of cement base paint after prepation of surface of walls/sump including Writing letter on Wall/Sump and necessary scaffolding work etc. complete all as specified and directed
M & L for preparation of old surfaces of LT steel tubular poles of any size and type with bracket clamps etc and painting with two coats of Aluminium paint upto 6 mtr long and exposed surface of Pole yellow and black paint in strips alternative 30 cm wide ipto 1.5 mtr from ground level including marking of pole No's with paint complete all as specified and as directed.
M&L for re-painting of LT Panels/feeder pillars with two coats of super enamal synthetic paint over a coat of red-oxide primer with sparygun including writing letters on feeder pillar in appropriate size of letters complete all as specified and directed.
supply & installing steel tubular swaged poles type 410 SP-31 (9 mtr long) of approx wt.147 kg conforming to IS 2713 (Part-II) with top lamp including excavation, earth work, PCC foundation, base plate,PCC coping,GI pipe for cable protection etc. and GI bracket for fitting mounting, complete all as per manufacturer's instructions and as specified and as directed by E-in-charge. NOTE:- The unit rate in this item is deemed to be included the cost of exacavation and earth work in any type of soil,PCC foundation 1:4:8 type D-2 , PCC coping 1:2:4 type B-1 as in steel tubular pole and GI bracket made of GI pipe medium grade 40 mm bore, 1.5 mtr long for fixing of street light fitings . The steel pole shall be painted by bituminious paint total length inside and up to planting depth outside and remaining portion of pole painted with two coat of aluminium paint over a coat of red oxide complete all as specified and directed.
Raising depth of existing bore by drilling 350 mm (14") bore hole by DTH type method at any depth below soil/rock due to insufficient of output after redevelopment of existing bore including disposal of surplus soil to a distance n.exc. 50 mtr complete all as specified and directed. Note:- (i) The depth of drilling bore shall be upto water level and will be directed by Engr-in-charge. (ii) The rates quoted is deemed to be inclusive of all T&P equipments and labour required for execution of this item at site including trasportation charge for the said T&P equipments and no extra cost shall be paid for the same. (iii) Engineer-in-charge will decode to raising depth of existing bore redevelopment or provide new bore at new location which may be economical at their discretion. decision shall be final and binding
Supply, fixing, laying, jointing, welding & testing in replacement of MS Pipe of size 250 mm (Heavy duty class 'C') 8 mm thick laid in trenches including Socket for complete all as specified and directed by Engr-in-Charge
Supply, fixing, laying, jointing, welding & testing in replacement of MS Pipe of size 250 mm (Heavy duty class 'C') 8 mm thick laid in trenches or on floors having 3mm slots in 2.44 to 3.85 mtr length including Socket for complete all as specified and directed by Engr-in-Charge.
Supply and packing pea gravel of size 3mm to 6 mm around casing / housing pipe complete all as specified and directed by Engr-in-Charge NOTE: Stack measurement of pea gravel shall be entered in MB and accordingly paid to contractor
Supply and fixing GI column pipe heavy grade, 80 mm bore 3 mtrs long coupled with heavy grade suitable size of MS flanges 16mm thick duly welded on both sides as directed including necessary nut and bolts with washers & rubber packing required at site condition and lowered in to the bore well including taking out old unserviceable Column pipe complete all as specified and directed by Engr-in-Charge (length of Each column pipe shall be 3 Mtrs)
Supply and fixing, install, test and commissioning of LT Feeder pillar box outdoor type totally enclosed with front and rear opening hinged doors with canopy sloped top projected and raised platform of suitable sizes weather dust vermin proof made out of 3.15mm thick CRCA sheet, factory made (CPRI approved manufacturer) powder coated painted as approved colour, copper bus bar suitable for 3 phase 4 wire LT, AC, 50Hz, 433 volts, 100 Amps capacity RYBN insulated with sleeved insulation complete with multifunctional meter LED type by showing Amps, volts, frequency etc along with suitable size of CT on outgoing, indicating lamp RYB, complete internal wiring with suitable size of PVC insulated copper conductor cable, including cable glands and lugs for incoming and out going LT cables as per required sizes, PCC platform made out of 1:2:4 type B1 and pedestal of 30 cm height from GL with suitable nut, bolts, washers etc., all as specified and directed for suitable to in and including accomodate the following items and dismantling exisiting unserviceable LT panel complete.
(a) 63 Amps MCCB 16 KA 4 Pole - 01 Nos (b) 63 Amps 3 Phase Auto Phase Sequence Corrector- 01 Nos (c) Thermal Over load relay(13-21 Amp) - outgoing -01 Nos (d) ML-1.5 Contractor - 01 Nos for outgoing (e) ST 100 Timer- 01 Nos Note :- Contractor shall be take approval of Accepting Officer for panel drawing before fabrication of Panel.
Supply and fixing MS clamp in MS falt 80mm X 6mm with two Nos of MS nut & blots for 80mm dia column pipe
Supply and fixing in replacement well cap suitable for 250 / 300 mm bore pipe consisting of two parts complete with welding and machinery work having provision of cut out for passing of column pipe and fabricated out of mild steel sheet 3.15 mm thick complete all as specified and directed by Engr-in-Charge.
Re-development of existing bore well, if any capacity size, not more than 160mtrs deep, at the pressure not less than 6 Kgs/Sqcm by disel engine driven air compressor of capacity 630 CFM with & including air pipe and connected items to achieve the minimum yield of 3 litres per second of tube well including transport complete all as specified and as directed
Supply and fixing LED Street Light Fitting 90 Walt 230 V AC Outdoor type inc box and all accessories complete.
Note:- Sch of credit amount of Rs.343502.00/- shall be deducted from total quoted BOQ Amount when work acceptance letter issued.
ENVIRO TECH SERVICES
SREE BABA TRADERS
DHAIRYAE ENTERPRISES
KUSHAL ENTERPRISES
Rahul Enterprises
Deven Associates
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .