8270 PETTY REPAIRS TO TECHNICAL AND OFFICE BUILDINGS IN TECHNICAL AREA AND REPAIRS/MAINTENANCE TO INTERLOCKING TILES, HARDSTANDING ETC. AND CERTAIN MISC B/R WORKS AT KATTABOMMAN UNDER GE TIRUNELVELI

Amount

Taking down shutters exc 1 sqm and not exc 2 sqm each complete all as specified and directed.

Supply and fixing for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, in opening as per specification & drawing complete all as specified and directed.

Supply and fixing for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top & bottom rail on either side of & as gap insert for top & bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to stiles & rails with suitable sheet beading and jointed together with solvent cement supplied and fixing to frame at site as per specification & drawings.

Hacking out old broken glass (any thickness, size, quality or description ) from wooden frame glazed with putty or fixed with beads complete all as specified and directed.

Supply and fixing Sheet glass 5.5 mm thick ordinary quality of any colour & glazing with wooden beading/oil putty/aluminium windows in square exceeding 0.5 sqm in each pane complete all as specified and directed.

Material and labour for Extruded aluminium alloy handles, fabricated type, anodised of size 125mm complete all as specified and as directed

All as per item No.6 above, but fixed in repairs complete all as specified and directed.

Material and labour for Stainless steel Hinges of 100mm long complete all as specified and as directed

Supply and fixing Aluminium anodised, barrel tower bolts of extruded section 100mm long complete all as specified and as directed .

Supply and fixing in repairs anodised aluminium alloy Harrison rails along with vertical venetian blind complete with all its accessories like brackets, stops, roller including fixed to wall with screws complete all as specified and directed by Engr-in-Charge..

Supply and fixing in repairs 140mm/150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, complete all as specified and as directed .

Supply and fixing Aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire stables fixed in repairs complete all as specified and directed.

Supply and fixing in repairs door closer Aluminium die cast body Hydraulically regulated designation No.03 universal type suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 kg complete all as specified and as directed.

Supply and fixing Aluminium (extruded section) body, door closer fixed in repairs hydraulically regulated universal type, suitable for door shutter of 1000 to 1500 mm in width and of weight between 100 to 120 kg and fixed complete all as specified and as directed.

Material and labour for servicing and make operational of steel door of having width 1000 to 1500mm and of weight between 100 to 120 Kg each including taking down and any modification and refixing in the same opening complete all as specified and as directed.

Material and labour for Welded steel wire fabric n. exc 4 Kg per Sqm of any size and shape supplied and fixed complete to wood or steel members complete all as specified and as directed

Supply and fixing in repairs Mortice sash lock with 5 pin tubular brass cylinder 70mm length with set of 'L' type lever handles complete & with key operation on both sides suitable for flush type hollow metal fire doors complete all as specified and as directed. Make : Ryobi or equivalent as approved by GE.

Supply and fixing in repairs 22mm Stainless steel 'L' type lever handles SS-304 grade, satin finish for flush type hollow metal fire doors complete all as specified and as directed. Make : Ryobi or equivalent as approved by GE.

Taking down rolling shutters completely for replacing the worn out/damaged parts including necessary cutting and welding and refixing the rolling shutter in the same position after carrying out repairs with greasing of area n.exc 12 Sqm complete all as specified and as directed..

Material and labour for applying one coat of synthetic enamel paint including preparation of surfaces on old painted steel surfaces complete all as specified and as directed

Supply and fixing in repairs Vitreous china Rimless Single piece-WC with UF soft close seat cover, Hinges, Fixing Accessories, Accessories Set and Cistern fittings, Size: 390x710x720 mm and S Trap -300 mm including connection to drain (or outgoing pipe) and to flush pipe, anti syphonage pipe, complete all as specified and as directed. Make : Jaquar, Code No VGS-WHT-81853S300UF

Supply and fixing in repairs CP Toilet Roll Holder with flap complete all as specified and directed. Make : Jaquar, Code No AQN - 7753

Supply and fixing in repairs for Swivel Mirror 630 X 445mm Rectangular Shape all complete as directed by Engineer-in-Charge. Make : Jaquar, Code No AKP-35795

Supply and fixing in repairs bevelled edge mirror of superior glass 5.5mm thick of approved make or any other equivalent, 3mm thick plywood backing or asbestos sheet backing or with wooden beads all-round of specified size and fixed to wooden plugs with CP brass screws and cup washers etc, all complete as directed by Engineer-in-Charge.

Supplying and fixing in repair stop valves with flange fancy type chromium plated with long shank and cup (concealed type) for 15 mm dia bore pipe complete all as specified and as directed . (Make : JAQUAR : CON-087FTK )

Supply and fixing in repair Angular cock with Flange, fancy type chromium plated with long shank and cup (concealed type) for 15 mm dia bore pipe (Make: Jaquar, JAQUAR : CON-059KN ) complete all as specified and directed

Supply and fixing in repair bib taps fancy type with flanges chromium plates screwed down high pressure for 15 mm dia bore pipe complete all as specified and as directed . (Make: JAQUAR : CON-047KN )

Supply and fixing in repair two way bib taps fancy type with flanges chromium plates screwed down high pressure for 15 mm dia bore pipe complete all as specified and as directed . (JAQUAR : CON-041KN)

Supply and fixing in repairs CP towel rail 600mm long of approved make as directed by Engineer-in-Charge. ( Make : Jaquar ; Cat No AKP-35711P or equivalent as approved by GE).

Supply & Fixed in repairs Hand Shower (Health Faucet) with 1 Meter Long Easy Flex Tube in Chrome Finish and Wall Hook with NRV (Back flow preventer) complete all as specified and directed. (Make : Jaquar, Code No ALD- 579 or equivalent as approved by GE).

Supply & fixing in repairs Soap Dish Holder complete all as specified and directed. (Make Jaquar, Code No AKP - CHR35731P or equivalent as approved by GE.)

Supply and fixing in repairs Soap dispenser with metallic bottle complete fixed to wall etc all as specified and as directed. (Make : Jaquar, Code No ACN-1135N).

Supply and fixing in repairs brass chromium plated shower rose Continental series with shower arm 105mm size joints fixing to steel pipe complete all as specified and directed. (Make : JAQUAR : OHS-1709 & JAQUAR : SHA-477 )

Supply and fixing in repairs pillar taps, fancy type, chromium plated, screwed down high pressure screwed for iron pipe, fancy type 15 mm dia bore complete all as specified and as directed . (Make: JAQUAR : CON-021KN )

Supply and fixing in repairs 15mm dia Chromium plated fancy type Sink Cock with Swinging Spout (Wall Mounted Model) complete all as specified and as directed. (Make: JAQUAR : CON-347KNM )

Supply and fixing in repairs Bottle Trap 32mm Size with 250mm & 190mm Long Wall Connection Pipes & Wall Flange complete all as specified and as directed. (Make: JAQUAR : ALD-769L250x190 )

Supply and fixing Sensor Mini Concealed Type Flushing Valve for Urinal Complete Set with Installation Box complete all as specified and as directed. (Make: JAQUAR : SNR-STL-51083 )

Supply and fixing in repair Wall Mixer for 15mm dia with Provision for overhead Shower with 115mm Long Bend Pipe on Upper Side, Connecting Legs & Wall Flanges complete all as specified and as directed. (Make: JAQUAR : CQT-23273UPR )

Supply and fixing Vitreous China Urinal, Half stall type (Size: 355x340x535mm) ,white (excluding flushing cistern, flush pipe and waste pipe) including connections to flushing pipe and outgoing pipes fixed in repairs complete all as specified and as directed. (Make: JAQUAR : URS-WHT-13261)

Material and labour for fixing in repairs PVC(SWR) floor trap plain with grating including jointing with solvent cement of outer diameter 75mm for bathrooms complete all as specified and as directed .

Supply and fixing medium grade GI tubing 15mm bore diameter with all fittings and fixed including taking up or down old existing unserviceable pipe complete to walls & ceilings or laid in floors complete all as specified and as directed ..

Supply and fixing medium grade GI tubing 20mm bore diameter with all fittings and fixed including taking up or down old existing unserviceable pipe complete to walls & ceilings or laid in floors complete all as specified and as directed .

Dismantling of existing water tanks and Supply and fixing rotational moulded PVC water tanks 500 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified

All as per Item No 45 above, but for 1000 Ltrs capacity complete all as specified and as directed .

Supply and fixing ball valves high pressure of PTMT with epoxy coated aluminium rod & high density ball screwed for 20m dia bore of pipe (Minimum weight 210 gms) complete all as specified and as directed.

All as per Item No 47 above , but fixed in repairs complete all as specified and as directed .

Disconnecting existing rotational moulded PVC water tanks exceeding 250 & n.exc 500 Ltrs capacity (cylindrical vertical with closed top), setting aside (or lowering if required) for cleaning and removing all scales and dirt etc from the tanks and from mouths of circulating pipes etc; reconnecting and re-fixing in position and securing access covers complete all as specified and as directed.

All as per Item No 49 above, but for 1000 Ltrs capacity complete all as specified and as directed .

Demolition of cement concrete(unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Material and labour for Hardcore (using broken stone or boulders) of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc 15cm thick watered and rammed to a true surfaces complete all as specified and as directed.

Material and labour for cement concrete type C-2, 1:3:6 (40 mm graded aggregate) 50 mm thick as in plinth protection finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for 75mm thick PCC 1:4:8, type D-2 (using 40mm graded crushed stone aggregates) as in Sub base of flooring and finished even and rough to receive the topping layers complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed .

Material and labour non-skid coloured joint free ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06 Sqm but not exceeding 0.11sqm, in floors etc set and jointed in neat cement slurry over and including provision of screed bedding layer 15 mm thick in CM 1 : 6 complete all as specified and directed.

Material and labour glazed ceramic joint less coloured tiles in vertical surface 300x450 mm x 7mm thick set and jointed in neat cement slurry over and including provision of backing coat 10mm thick in CM 1 : 4 complete all as specified and directed

Material and labour non-skid coloured joint free ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry over and including provision of screed bedding layer 15 mm thick in CM 1 : 6 complete all as specified and directed.

All as per Item No 58 above, but including provision of backing coat 10mm thick in CM 1 : 4 in vertical surfaces such as skirting, dados and risers to steps etc complete all as specified and as directed.

Material and labour for 40mm thick PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregates) as in flooring and finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for 18mm to 20mm thick granite (of any type) work (table rubbed and polished) in steps ; jambs; pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust and admixture of pigment to match with shade of granite including provision of screed bedding layer 15 mm thick in CM 1 : 4 complete all as specified and directed.

Supply and fixing in repairs PVC (SWR) pipes, 110mm bore of pipe, single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

Supply and fixing in repairs PVC (SWR) bends any radius, 110mm bore of pipe with rubber ring joints fixed to walls complete all as specified and as directed.

Supply and fixing in repairs stack clamps for 110mm bore pipe made out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed.

Material and labour for cutting out bricks, forming toothing for, and bonding new brickwork built in CM 1:4 into old brick walls built in cement mortar including value of new materials entering old walls and jointing and pointing (measured on vertical face in contact with old walls only) complete all as specified and as directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed .

Material and labour for Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having knurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and as directed ..

Material and labour for Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having Phillips head with under head utter at 200 mm centre to centre, including finishing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish complete all as specified and as directed . (Frame work for ceiling shall be measured and paid separately)

Material and labour for preparation of damp surfaces of walls by scrapping loose scales and putty/paint using part(putty blade) upto the plaster of wall ; then cleaning the surfaces of walls with wire brushes and compressed air blower ; scrubbing down with water & well dried ; the applying a coat with mixture Dr Fixit Damp Guard classic in 1:1:1 ratio (i.e. one unit of portable water, one unit of base & one unit of hardener) and the coat is allowed to dry for 24 hour ; after which preparing the surfaces repaired and matching the same with the adjoining surfaces/texture with paint complete all as specified and as directed by Engineer-in-Charge. Note : The quoted rate is inclusive of necessary scaffolding and safety measures etc upto a height of 10 meters.

All as per Item No 69 above, but on ceiling surfaces complete all as specified and as directed .

Demolition of brickwork built in cement mortar incl all quoins, arches, pillars etc, complete all as specified and as directed.

Material and labour for Brickwork built in CM 1:6 with old size fly ash bricks, straight or curved on plan exc 6m mean radius complete all as specified and as directed.

Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Material and labour for rendering 15mm thick on brick or concrete surfaces in CM 1:6 on fair faces of brick work or concrete surfaces on wall surfaces finished even and smooth (without using extra cement) complete all as specified and as directed.

Material and labour rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 mixed with liquid WPC @ 0.25 % by the weight of cement used and finishing even and smooth without using extra cement complete all as specified and directed.

Material and labour rendering 5 mm thick on fair faces of concrete surface of ceiling in CM 1:3 and finishing even and smooth without using extra cement complete all as specified and directed.

Material and labour applying two coats of distemper oil emulsion incl a coat of chalk whiting over 1mm thick Birla wall care putty to newly plastered surface including preparation of new plastered surfaces of walls complete all as specified and directed.

Material and labour for preparation of new plastered surfaces and applying two coat of superior quality anti algae weather proof acrylic paint exterior grade (APEX) over a coat of exterior grade primer on external surface complete all as specified and as directed.

Material and labour applying two coats of distemper oil emulsion incl a coat of chalk whiting over 1mm thick Birla wall care putty to newly plastered surface including preparation of new plastered surfaces of Ceiling complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

Demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed

Material and labour for PCC 1:2:4 Type B-1(using 20mm graded stone aggregate) as in kerb stones and the like including weathering, slightly rounded or chamfered angles and throating and jointed in cement mortar 1:4 complete all as specified and as directed

Material and labour for preparing newly plastered surfaces over 10cm girth or width, not otherwise described and applying two coats of synthetic enamel paint over priming paint complete all as specified and directed.

Material and labour for Anti-Termite Treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and as directed.

Demolition of reinforced cement concrete as in beams , columns and footings and slab etc complete all as specified and directed.

Material and labour for RCC 1:2:4 (Nominal Mix) type B1 (using 20mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors,roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick complete all as specified and directed.

Supply and fixing TMT bars 10m dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Cleaning of water tanks of capacity exc 250 and not exc 500 ltr capacity and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified and directed.

Cleaning of water tanks of capacity exc 500 and not exc 1000 ltr capacity and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified and directed.

Cleaning of water tanks of capacity exc 1000 and not exc 2000 ltr capacity and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified and directed.

Supply and fixing in repairs 25mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed.

Dismantling of PVC water tanks of capacity 500 Ltrs capacity and removal to store complete all as specified and directed.

Dismantling of PVC water tanks of capacity 1000 Ltrs capacity and removal to store complete all as specified and directed.

Supply and fixing Rotational moulded polyethylene water storage tanks 500 Ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

Supply and fixing Rotational moulded polyethylene water storage tanks 1000 Ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

Taking up or down steel tubing 20mm dia and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down steel tubing 25mm dia and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Supplying and fixing or laying 20 mm dia CPVC pipe SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.

Supplying and fixing or laying 25 mm dia CPVC pipe SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.

Supply and fixing 20mm bore GI tubing medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Supply and fixing 25mm bore GI tubing medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Fixing only 20mm bore GI tubing medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Fixing only 25mm bore GI tubing medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Supply and fixing in repairs 20mm dia CPVC Gate valve for CPVC pipes complete all as specified and as directed

Supply and fixing in repairs 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Supply and fixing in repairs 25mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Material and labour for opening of GI/CPVC pipe/taps of any dia and finding out the block in pipe line/taps and clearing the air lock problem of all bath rooms/kitchen/toilet including necessary tools and washers etc complete all as specified and directed.

Supply and fixing in repairs for PVC water tank covers of any colour for 500ltrs and 1000ltr capacity of water tank complete all as specified

Dismantling wrought iron or mild steel work of any description complete all as specified and directed.

Material and labour for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

Material and labour Preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Material and labour plain cement concrete type D2, 1:4:8, 100mm thick in sub base of floor finished even and rough to receive top layer complete all as specified and directed.

Material & Labour for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

Material and labour for machine pressed precast concrete interlocking paver block 60mm thick made of M-35 grade cement any shape and with grey cement and pigment complete all as specified and directed

Material and labour for Chequered cement concrete tile 30CM x 30CM x 25mm thick with grey cement and pigment set, jointed and pointed in neat cement slurry in floors over and including cement mortar bedding 20mm thick in CM 1 : 6, complete all as specified and directed..

Material and labour PCC coping 1 : 2 : 4 type B-1 (using 20mm graded stone aggregate) cast in situ as in coping and weathering, slightly rounded or chamfered angles and throating etc including necessary form work complete all as specified and directed.

Supply and fix glass dividing strips 38 x 3mm thick complete all as specified.

Material and labour plain cement concrete type B1, 1 : 2 : 4, 50mm thick (using 20mm graded aggregate) finished even and fair without using extra cement complete all as specified and directed.

Material and labour for cement concrete type C-2, 1:3:6 (40 mm graded aggregate) 75 mm thick as in plinth protection finished even without using extra cement complete all as specified and directed.

Forming construction Joint 30mm deep x 10mm wide filled with sealing compound grade 'A' complete all as specified and directed.

Material and labour for rendering 15mm thick on brick or concrete surfaces in CM 1:4 on fair faces of brick work or concrete surfaces of wall finished even and smooth (without using extra cement) complete all as specified and as directed.

Demolition of Reinforced concrete in any position, manhole covers, drain covers, septic tank slabs etc & disposal of rubbish off the premises complete all as specified and directed.

Material and labour for providing precast cement concrete in 1:2:4 type B-1 using 20mm graded stone aggregate as in drain cover slab, manhole cover slab etc set in CM 1:6 including necessary formwork complete all as specified and as directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified and directed.

JR ENTERPRISES

PHEJAYS AGENCIES

SRI LAKSHMI GANESH ENGINEERING WORKS

sri manikandan enterprises

S KUMARAN

VVM CONSTRUCTIONS

CHANDRASEKRAN ENTERPRISES