REPAIR/MAINT TO WALL CLADDING, ROOF SHEETS, FALSE CEILING, ROOF TRUSSSES, VALLEY GUTTERS, FLASHING SHEETS, WALL PANELLING AND MS POSTS ETC LOWER LEIMAKHONG MIL STN

Amount

B/R work

Dismantling boarding (wall and ceiling), any description, fixed in any position with nails complete all as specified and directed.

M&L for Weather boarding, clean sawn, thickness 20mm to 25 mm and rebated on thick edge to give 20mm laps and fixed complete all as specified and directed.

S & F in repair for non-asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws.complete all as specified and directed

M & L for 6mm thick plywood (no of ply 05), grade BWR, type BB, fixed with nails to timber frame work on wall clading complete all as specified and directed.

M & L for 6mm thick plywood (no of ply 05), grade BWR, type BB, fixed with nails to timber frame work in ceiling. complete all as specified and directed.

S&F exposed GI powder coated snap grid frame work for false ceiling of grid size 600 x600mm comprising of wall/cleat angle of size 25 x25 x0.35mm and main/cross tee of size 24 x38 x0.70mm with 4mm dia GI wire as suspender and including 4mm thick Plain E-Board including fixing arrangement from steel truss of any type and applying two coats of oil bound distemper over one coat of chalk whiting complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provide.complete all as specified and directed.

S&F Steel work in tubular trusses of any shape or size including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1998 grade St.-240.complete all as specified and directed.

S&F structural steel work in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe 410-W (Grade E-250) quality-A complete all as specified and as directed.

M&L for Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc.complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided.complete all as specified and as directed.

M& L for Making good under cills or over arches, lintels and bressummers. including all pinning, dismantlled portion of any type in CM 1:4 or plain cement concrete 1:2:9 as required thickness when necessary complete all as specified and as directed.

M&L for providing cement concrete type B1 1:2:4 (20mm graded aggregate) as in roof kerbs or mud stops rounded or chamfered on edges and other similar bands ,plinth coureses parpets and railingup to 60 cm in height ,and as in copings.complete all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, and getting out in hard/dense soil complete all as specified and directed.

M&L for Cement concrete, (1:4:8) type D2 (using 40mm graded aggregate)as in foundations, filling and mass concrete .complete all as specified and directed.

Taking down cement plaster of any thickness on brick or stone walls etc including raking out joints, hacking for key and scrubbing down with water built in cement mortar complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work in cement mortar (1:4) using water proofing compound @2% by weight of cement as per manufacture instruction and finishing the surface even and smooth without using extra cement complete all as specified & directed.(Using Dimapur Sand) [Note: WPC will be measured and paid separately)

M&L for 10mm thick redndering in cement plstatering 1:4 on plaster/concrete surfaces finished even in smooth without using extra cement.complete all as specified and directed.

Supply only integral water proofing compound

Dismantling of plain or corrugated steel sheeting any gauge thickness including nainital or similar pattern on roof covering.complete all as specified and directed.

S&F 0.63mm thick galvanised corrugated mild steel sheeting with two corrugation side lap fixed with coach screws in roof, wall etc.with grade of zinc coating 275 complete all as specified

S&F 0.63mm thick, plain galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275complete all as specified and directed

Ditto all as per Sl item No. 23 here-in-above but except sheeting (NOTE: Seviceable 0.63mm thick galvanised corrugated mild steel/plain sheets obtained from dismantling under Sl item No 22.00 here-in-after shall be reused under the item)

S&F pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F Pre-Painted galvantume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed

M & L Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with creosote oil complete all as specified and directed.

M&L for prepraration of old painted surfaces of steel of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint over a coat of aluminium red oxide paint.complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of whitewash complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of chalk whiting complete all as specified and directed.

M&L for preparation of new untreated surface of ceiling board by soft wire brushing rubbing down & applying one coat of Oil bound destemper complete all as specified and directed

M&L for preparation of old (existing) untreated surface of ceiling board by soft wire brushing rubbing down & applying one coat of Oil bound destemper complete all as specified and directed

Preparation of new surface of wood and applying one coat of pink primer & two coat of synthetic enamel paint of any description not otherwise described over 10cm width or girth.complete all as specified and directed

M&L for preparation of old and exiting painted of wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new painted steel surfaces of any description, over 10 cm in girth, not otherwise described and painting two coats of synthetic enamel paint over a coat of red oxide.complete all as specified and directed.

S&F solid PVC wall lining consisiting of 5 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed.

S&F5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame complete all as specified and directed.

M&L for18/19 mm thick block boards ,grade 2 quality ,interior grade ,commercial type with decorative face veneer on both face fixed with screw to timber frame work complete all as specified and directed.

M&L for 12 mm thick block boards ,grade 2 quality ,interior grade ,commercial type with decorative face veneer on both face fixed with screw to timber frame work complete all as specified and directed.

S & F Continuous (piano) hinges Width of flaps (when open) 30mm, mild steel, bright finish or electrogalvanised complete all as specified and directed.

S&F 100mm aluminium handles, cast type, anodised complete all as specified and directed.

Dismantling of timper scantling 40 sq .cm and over in section,in any position. complete all as specified and directed.

Ditto as above item no 43 but in fillets in unframed work under 40 sq.cm in section.complete all as specified and directed.

M&L for well seasoned 2nd class hard wood in scantling, wrought timber framed and fixed complete all as specified and directed.

Ditto all as per Sl item No. 52.00 here-in-above but except scantling (NOTE: Seviceable wooden scantling obtained from dismantling under Sl item No 50.00 here-in-after shall be reused under the item)

S & F 2nd class hard wood plain fillets. square, rectangular or triangular in section,sectional area exe 13 sqcm & n.exe 25 sqcm clean sawn, secured with nails or brads complete all as specified and directed.

SHARMA ENTERPRISE

RK Enterprises

L BINOD CONSTRUCTION CO

M/S PRADEEP CONSTRUCTION

M/S BIJOYA LAXMI ENTERPRISE

MAURYA CONSTRUCTIONS

APPLE CONSTRUCTION