Construction of one block of Solarized lavatory blocks containing 03 units of WC and baths with common laundry place at Police Station Nyoma.

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) in foundation trenches,drains,pipes and cables etc. (not exceeding 1.5mtr in width or 10sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5mtr including getting out excavated soil and disposal of surplus soil as directed,within a lead of 50 mtr. All kinds of soil

Dry stone pitching (any thickness) including cost of stones.On Horizontal

Providing and laying in position cement concrete of specified grade excluding the cost of centring andshuttering- All work upto plinth level. 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) (A) Crushed

Random Rubble masonry with ~ard stone from qyarry infoundation and plinth including levelling up with cement concrete1:6:12 (1 Cement: 6 coarse sand: 12 graded stone aggregate 20mm nominal size) upto plinth level with cement mortar 1:6 (1 Cement: 6 coarse sand)

Providing and laying damp-proof course 50rnm thick with cement concrete 1:2:4 (1 cement : 2 co.:Hse sand 4graded stone aggregate 20mm nominal size Crushed

Providing and constructing cement stabilized mud block masonrt (mud block made out of soil containing 60% to 70% of sand and 10% of cly and 5% of cement pressed using manual machine) in cement mortor 1:4 in walls.The size of the block is 305x143x100mm. laid in course cement mortor as per the direction of Engineer-in-charge.

Providing and fixing upto floor five level precast cementconcrete solid blocks including hoisting and setting inposition with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centring, shuttering and complete. 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) Crushed

Reinforced cement concrete work in walls (anythickness), including attached pilasters, buttresses,plinth and string courses, fillets, columns, pillars,piers, abutmen"ts, posts ans sturts, etc. upto floorfive level excluding cost of centring, shuttering,fmishing and reinforcement. 1:1.5:3 (1 cement : 1.5 coarse sand : 3graded crushed stone aggregate 20mm nominal size)

Reinforcement for R.C.C. work including straightening,cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars.

Centring and shuttering including strutting, propping, etc. and removal of form for. Foundations: footings, bases of columns etc. for mass concrete.

Columns, Pillars, Piers, Abutments, Posts and Struts

Lintels, beams, plinth beams, girders, bressumers and centilevers.

Suspended floors, roofs, landings, balconies and access platform.

Providing wood work in frames of doors, windows,clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) First class kail wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,all complete as per direction of engineer- in charge. Second kail wood 35mm thick

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors,windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Pre-laminated particle board with decorativelamination on one side and balancing lamination on other side, Grade I, Type IllS: 12823 marked

Providing and fixing glazed shutters for doors, window and clerestory windows using 1 Okg/sqm (4mm thick) float of glass panes including lSI marked M.S. pressed butt· hinf!eS bright finished of required size with necessary screws. second class Kail wood

Providing and fixing lSI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete. 250x16 mm

Providing and fixing lSI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete. 150x10mm

Providing and fixing lSI marked oxidised M.S. handles conforming to IS : 4992 with necessary screws etc.complete:125 mm

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer,over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with 1st quality acrylic washable distemper (ready made) of approved manufacturer and of required shade/ colour complete as per manufacturer's specifications Two or more coats on new work

Rough cast plaster upto 1Om height above ground level with a mixture of sand and gravel or crushed stone from 6mm to 10mm nominal size dashed over and including the fresh plaster in two layers, under layer 12mm cement plaster1:4 (1 cement :4 course sand) and top layer 10mm cement plaster 1:3 (1 cement:3 fine sand) mixed with 10% finely grounded Hydrated lime by volume of cement.

Finishing walls with water proofing cement paint of required shade New work (two or more coats) applied @3.84 kg/1 Osqm

Providing and fixing 1st quality ceramic glazed tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy,bottle green, black of any size as approved by Eningeerin-Charge in skirting, risers of steps and dados over 12mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing Ceramic gla.z:ed floor tiles 300x300mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of NITC.O, ORIENT,SOMANY, KAJARIA or equivalent make in colour such as White, Ivory, Grey, Fume Red, Brown laidon 20 mmthick bed of Cement Mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete.

Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on woodwork (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Cement concrete flooring 1:2:4 ( 1 cement: 2 coarse sand . : 4 graded stone aggregate) finished with a floating coatof neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 50 mmthick with 20mm nominal size stone aggregate. Crushed.

Providing and fixing glass strips in joints of terrazo/cement concrete floor 40 mm wide and 4 mm thick

Thermal Insulation sot roofing with Expanded polystyrene fixed with suitable adhesive to the false ceiling as per the directions of the Engineer-in-charge.With Type N-Normal 50 mm thick

Strctural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid lSI license]. including Puffing insulation double layer.

Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast Iron P or Strap,10 litre low level P.V. C. flushing cistern including flush pipe (of approved make) "manually contro(led device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. Orissa pattern white vitreous china W.C. pan of size 580x440 mm with integral type foot rests.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x41 Ox265 mm sizes respectively with automatic flushing cistern with C. I./M.S. brackets standard size of G. I. flush pipe and C.P. brass spreaders with brass unions and G. I. clamps complete, including painting of fittings and brackets, cutting and making good the wafls and floors wherever required: One urinal basin with 5 litre P.V.C white automatic flushing cistern of approved quality.

Providing c;1nd fixing wash basin with C. I./M.S. brackets,15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: White Vitreous China wash basin size 550x400 mm with single 15 mm C.P. brass pillar taps

Providing and fixing brass bib cock of approved quality. 20 mm nominal bore

Providing and fixing ball valve (brass) of approved quality complete 20 mm nominal bore

Providing and fixing uplasticised PVC connection pipe with brass unions 20 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved make conforming to IS : 8931 a) 15 mm nominal bore

Providing and fixing Chlorinated Poly vinyl Chloride (CPVC) pipes havmg thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings,this included jointing of pipe and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer-in-charge. (External work) 75mm nominal inner dia pipes.

1 00mm nominal inner dia pipes.

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes SOR 7.4 UV stablized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fitings 1/C fixing the pipe with clamps at 1.00m spacing. This includes cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge. (concealed work including cutting chases and making good the walls etc.) Pn-16 pipe, 25mm 00

Providing and fixing of 20ltrs Gyser at respective bath rooms. Complete job.

Pn-16 pipe , 32mm 00

Carriage of material by MT Cementand Steel an average lead 182 km

Carriage of material by MT Sand an average lead 8 Km.

Carriage of material by MT Stone agg. an average lead 45 Km.

M/S TASHI PHUNCHOK GOVT CONTRACTOR