Renovation of Remaining work of Main Building, Sanitary, Electrical and Septic Tank Qt. No- F32 at HEC, Dhurwa, Ranchi.

Earth work in excavation in foundation trenches in ordinary soil ( vide classification of soil item A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts leveling ramming the foundation treanches, removing roots of trees, and shrubs all complete as per approved design, building specification and direction of E/I.

Extra for Hard soil

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.

Providing coarse clean sand in filling in in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials labour, royalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume)

Providing designation 75B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I.

Providing and Laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level

1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size).

Providing designation 75A brick work in C.M. (1:6) in foundation and plinth - do -

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:-

Suspended floors, roofs, landings, balconies and access platform

Providing Tor steel reinforcement of 8mm dia rods as per approved design and drawing - do - do - TMT Fe 500

(a) 10mm (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)}

Providing 12mm cement plaster (1:3) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per specification and direction of E/I.

Providing 1.5mm cement punning including curing, carriage of water with all leads and lifts as per building specification and direction of E/I.

Supplying, fitting, and fixing M.S. Grill made of 20X6mm M.S. Flate as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I. (where materials is not supplied by the deptt.)

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels.

Granite stone slab of colour black, Cherry/Ruby red

Area of slab upto 0.50 sqm

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge

Granite work

Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing dust, dirt, scales smokes and grease and cleaning the surface throughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I. (Mode of measurement area shall be multiplied by the co-efficient as indicated in building specification)

Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I

Labour for scrapping old paint with paint remover and below lamp as required on wooden or steel surface including cost of all labour and materials and scaffolding all complete as per building specification and direction of E/I.

Providing & Applying high quality acrylic modified resin based texture of Dholpur/Red sand stone Pattern with anti algae and UV resistance properties to be applied as intermediate finish in desired pattern @ 43.04 kg/10 sqm to form film of 1- 1.5 mm thickness after scrapping and properly cleaning the surface to remove loose particles from the plaster surface, followed by top coating with Premium Acrylic Smooth exterior paint with Silicone additives of required shade by two or more coats @ 1.43 litre/10 sqm, complete as the direction of Engineer -in-Charge

Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D- 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane

3 mm thick

Extra for covering top of membrane with Geotextile, 120 gsm non woven, 100% polyester of thickness 1 to 1.25 mm bonded to the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation.

Providing and fixing factory made uPVC glazed/wire mesh windows/ doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge.Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately.Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for(i) Sites with basic wind speed > 45 m/sec as per IS 875 — Part 3(ii) Sites with structure height more than 20m for all wind speeds

Three track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body

Using R2 series with frame (70 mm & above) x (40 mm & above) & both glazed and fly screen sash (25 mm & above) x (50 mm & above) with zinc alloy (zamak) powder coated touch locks with hook. (Height upto 1.2 metre).

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)

Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides

Providing and laying matt finished vitrified tile of size 300x300x9.8 mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20 mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge

Providing and fixing Mortise latch and lock to be approved by the Engineer- in- charge, all complete.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.

Size of Tile 600x600 mm

Labour for fitting and fixing G.C.I. Or C.A. Sheet roofing in proper slope including the cost of "J" or "L" hooks, limpet and bitumen washers, carriage of sheet to work site, and taxes all complete as per building specification and direction of E/I.

Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated ‘J' or ‘L’ hooks, bolts & nuts 8 mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured.They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes

Point wiring in PVC conduit, with modular type switch :-

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core in surface/recessed PVC conduit, with modular switch, modular plate suitable GI box etc as required

1.3.3 Group C

Twin Control point wiring in PVC conduit, with modular type switch :-

Wiring for twin control point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, 2 way with modular switch, modular plate suitable GI box etc as required

Power plug wiring in PVC conduit (2 x 4 sq. mm) :-

Wiring for light/power plug with 2 x 4 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, along with 1 No 4 sq.mm FR PVC insulated copper conductor single core cable for loop earthing etc as required.

Circuit/ submain wiring in PVC conduit :-

Wiring for circuit/ submain wiring along with earh wire with the following sizes of FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit as required

1.7.1 2 x 1.5 sq.mm + 1 x 1.5 sq.mm earth wire

1.7.2 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earth wire

1.7.3 2 x 4.0 sq.mm + 1 x 4.0 sq.mm earth wire

1.7.4 2 x 6.0 sq.mm + 1 x 6.0 sq.mm earth wire

1.7.5 2 x 10 sq.mm + 1 x 6 sq.mm earth wire

1.7.6 2 x 16 sq.mm + 1 x 6 sq.mm earth wire

S/F PVC conduit :-

Supplying and fixing of following sizes of PVC conduit along with accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required.

S/F PVC/G.I. boxes :-

Supplying and fixing of following sizes of PVC/G.I box on surface / recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required.

1.22.1 75 mm x 75mm x 50mm deep/ (4" x 4")

1.22.2 72 mm x 146mm x 48mm deep/ (4" x 7")

1.22.8 170 mm x 221mm x 48mm deep/ (8" x 10")

1.22.9 210 mm x 206mm x 48mm deep/ (10" x 12")

S/F Modular type electronic fan regulator :-

Supplying and fixing stepped type electronic fan regulator on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

S/F Modular type blanking plate :-

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

S/F Modular boxes, base & cover plate :-

Supplying and fixing following size / modules , GI box along with modular base & cover plate for modular switches in recess etc as required.

1.27.1 1 or 2 module (78mm x 78mm x 45mm)

1.27.2 4/5 module (78mm x 140mm x 50mm)

S/F light plug point with modular type accessories :-

Supplying and fixing suitable GI box with modular plac and cover in front on surface of in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch. connection, painting etc. as required (For light plugs to be used in non residential buildings)

S/F power plug point with modular type accessories :-

Supplying and fixing suitable GI box with modular plac and cover in front on surface of in recess, including providing and fixing 6 pin 15/16 amps modular socket outlet and 5/6 amps modular switch. connection, painting etc. as required (For light plugs to be used in non residential buildings)

S/F ceiling rose :-

Supplying and fixing 2 pin 5 amp. Ceiling rose on the existing junction box/ wooen block including connection etc. as required .

S/F Batten holder :-

Supplying and fixing Batten / Angle holder including connection etc as required .

ITC ceiling fan :-

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated, copper conductor, single core cable etc. as required.

ITC exhaust fan upto 450 mm. sweep :-

Installation of exhaust fan upto 450mm sweep in the existing opening , including making the hole to suit the size of the above fan, making good the damage, connection , testing , commissioning etc . as required

S/F S.P. MCB DB :-

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

2.8.8 8 way, Double door

2.8.9 12 way, Double door

2.8.10 16 way, Double door

S/F 'C' series, MCB :-

Supplying and fixing 6 amps to 32 amps rating, 240 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, esting and commissioning etc. as required.

2.12.1 6/32 amps, Single pole

2.12.5 6/32 amps, DP

2.12.6 40 amps, DP

2.12.10 50/63 amps, TPN

Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of size not exceeding 35 sq mm direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.

Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of size exceeding 35 sq mm but not exceeding 95 sq mm direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.

Laying of one number additional PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of size not exceeding 35 sq mm direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required.

Laying of one number additional PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of size exceeding 35 sq mm but not exceeding 95 sq. mm direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required.

S.I.T.C of floowing rating reccess/surface mounted LED round/square shape Down light luminarie with pressure die cast housing for single phase supply voltage. Luminarie shall be confirm to IS:10322 part-5/section-2 or IEC:62722 with all neccssary accessories as required

15/16W LED Round Down light

3W COB based round LED light with multiple bem angles (36 Degree)

Supply Installation, testing and commissioning of follwing size ceiling fan 3 Blades confirming to IS:374:2019 including wiring the down rods of standard length (upto 30cm) with 1.5sq.mm. FR PVC insulated, copper wire suitable for 230V 50Hz, single phase supply etc. complete as required.

1200mm (48") BLDC 5star rating 32W Ceiling Fan

S.I.T.C of floowing rating surface mounted LED tube light fitting suitable for 230V 50Hz, single phase supply etc. complete as required.

20/22W LED Tube light

S.I.T.C of following rating LED Post top lamp made in die cast aluminium housing with decorative clear/opal serylic diffuser on existing pipe including connection with 1.5sq.mm. copper conductor etc all complete as required.

40/45W LED Post top lamp clear

S/F Modular Computer board cosisting switch & socket in 6 modular board etc as per required

1.24.3 15/ 16 amps, one way switch 2 X102=204 1.24.5 15/16 amps, 6 pin socket outlet 2 X 145=290 1.27.3 6 module box 1X240=240

12'' (300mm) metal exaust fan .

10 sq. mm, 4 core

35 sq. mm, 3.5 core

LED strip light 24volt DC with IP:65 rated in different colours of length 5mtr. and power 5W per mtr. including driver. IS:10322 part 5/ section 7

15/16Watt LED Bulb

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge

20 mm nominal outer dia Pipes

Providing and fixing on wall face unplasticised Rigid PVC rain waterpipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.

75mm dia

110mm dia

Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.

Single tee with door - 75x75x75 mm

Single tee with door - 110x110x110 mm

Single tee without door - 75x75x75mm

Single tee without door - 110x110x110 mm

Bend 87.5° - 75 mm bend

Bend 87.5° - 110 mm bend

Supplying material and labour for construction inspection chamber do - do

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Carriage of Material

Bricks - 8km (1k + 7p)

SAND av.LEAD 8 K.M

Stone chips lead 22km

Local Sand - 3 km

Providing & Fixing of modular kitchen cup board of steel rack hing basket with ply facing provision of all fitting of modular kitchen do -do

S/F/F Wardrobe Cabinet Laminate Finish including all materials, labour , taxes all complete as per building specification and direction of E/I.

Providing & Fixing Chaukhats Panneling with wooden framed by 12mm thick both side best quality Plyand 4 mm thick Veneer both side pasting finishing with melamine polish all materials and labour all complete as per buildings specification and direction of E/I.

Providing and fixing 30mm door shutter wooden framed by both side best quality ply and 4 mm thick Veneer both side pasting finishing with melamine polish all material and labour all complete (including all fancy type fitting) as per building specification and direction of E/I.

Providing and Fixing Washdown water closet (EWC) make it Jaquar P trap Pattern 3 with Cat no DRS-WHT-37953BIUFSM and Product id 5116877-59437028766

Providing and Fixing SWITCHGEARS Push ButtonType Flushing Cistern Dual FlushSystem 10 LTR make it ADHUNIK with Cat no (ASG-GOLD-DFC10L) and Product id 5116877-49492748952

Providing and Fixing Two Way Valve Chrome Plated Alloy Steel 15 15 15 make it PRIDE with Cat no (CP Bib Cock 2 in 1) and Product id 5116877-46224966212

Providing and Fixing Bathroom Hand ShowerLeaded Brass Grade DCB-2 of IS1264/1997 make it PRIDE with Cat no (CP Health Faucet) and Product id 5116877-8222644844

Providing and Fixing liquid soap dispenser, Capacity100 Milliliter make it PRIDE with Cat no (Liquide soap dispenser with glassholder bottle) and Product id 5116877-37197799589

Providing and Fixing Viterous China sinks/wash basin flat back and Rectangle make it Jaquar with Cat no (DRS-WHT-37601) and Product id 5116877-95681183220

Providing and Fixing Waste Fittings For Size 32 mmfor washbasin make it Vijay with Cat no (BRASS WASHBASIN COUPLING) and Product id 5116877-98475055076

Providing and Fixing 15 mm Leaded Tin BronzeFancy Tap make it CAVIER with Cat no (SO 04-205 CAVIER SINGLE LEVER 6") and Product id 5116877-56740054860

Providing and Fixing 15 mm Brass stop valve make it SHAKTI with Cat no (C.P ANGLE COCK HW-8206) and Product id 5116877-74826652122

Providing and Fixing SWITCHGEARS 450 mmConnection Pipe With Nuts make it ADHUNIK with Cat no (ACPN450) and Product id 5116877-9290703887

Providing and Fixing Towel Rail Cast Brass forTowel Rail make it Jaquar with Cat no (SINGLE TOWEL RAIL 600MM (AKP-35711P) (JAQUAR) and Product id 5116877-51183703503

Providing and Fixing Towel Rail Stainless Steel make it PRIDE with Cat no (Towel rack 600mm new) and Product id 5116877-191725686

Providing and Fixing Towel Rail Cast Brass GradeLCB-2 of IS:292/1983 for Towel Ring make it PRIMA with Cat no (CP TOWEL RING) and Product id 5116877-20934319528

Providing and Fixing Soap Dish-Case Stainless Steel make it PRAYAG with Cat no (PRAYAG SOAP DISH) and Product id 5116877-85287194484

Providing and Fixing Corner Glass Shelf make it PRIMA with Cat no (PGS-3207) Corner Glass Shelf) and Product id 5116877-24254339736

Providing and Fixing Bathroom Exposed RainShowers Cast Brass Grade LCB-2 ofIS:292/1983 make it Jaquar with Cat no (1BY1 SHOWER JAQUAR N T) and Product id 5116877-64343872599

Providing and Fixing Bathroom Hand Shower CastBrass Grade LCB-2 of IS:292/1983 make it Jaquar with Cat no(HSH-CHR-1653) and Product id 5116877-58232913575

Providing and Fixing Bathroom Body Showers CastBrass Grade LCB-2 of IS:292/1983 make it Jaquar with Cat no(SHA-549D8) and Product id 5116877-31096949201

Providing and Fixing 15 mm Brass Fancy Tap make PRIMA with Cat no(Wall Mixer 3 in 1 with L bend 15 mm(POL-7116) and Product id 5116877-24897712273

Providing and Fixing 25 liter 4 Star Water Heater make BAJAJ with Cat no(BAJAJ 25LT CALENTA-M S STAR GEYSER) and Product id 5116877-99621432880

Providing and FixingSHAKTI 20 mm Leaded Tin BronzeFancy Tap make(SHAKTI STEEL KITCHEN SINK (SB-1220-E)and Product id 5116877-88553000197

Providing and FixingPRIDE 15 mm Brass Fancy Tap PRIDE makeCP Wall Mounted Sink Mixer) and Product id 5116877-16845299419

Providing and FixingISKON-G Bathroom Or Toilet MirrorHanging System make (ISKON-G MIRROR) and Product id 5116877-76230367352

supplying fitting & fixing 0.5 hp pressure pump make

Add 18 % GST (in Basic Rate must fill 12)

Add 1% Labour Cess (in Basic Rate must fill 1)

Please Enable Macros to View BoQ information