SPECIAL REPAIRS OF BLDG NO P373 ORS LIVING ACCN OF 1 BIHAR AT ASIF NAGAR UNDER GE GOLCONDA

Amount

Dimantling of Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets.

S & F true or horizontal level 600mmx600mm panels, false ceiling, hot dipped galavnised steel sections, exposed suface with precoated capping, main tee and cross tee of size 24x32mm at every 1200mm c/c and wall angle of size 19x19mm fixed to perimetere wall, as per manufacturer's instructions, grid to be suspended at every 1200mm c/c in both directions by using 2mm dia pre-straightened GI wire at the main tee, including 9mm thick gypsum board of size 600mm X 600mm with rear side aluminium foil and front side PVC lamination, complete all as specified and directed.

S & F Aluminium protective self adhesive Bituminous strip 1.5 mm thick for water proofing to roof joint of galvalium sheet Roofs, light domes, glass roofs, emergency sealing and delevery covering joints in roof gutters etc. as approved by GE,and application methodology as per manufacturer's instructions (Super flash strip of STP or equivalent).

M&L priming plastered roof surfaces with oil based bituminous primer @ 1.2 Kg/sqm as per IS-3384:1986,16532,16540:2017 and providing water proofing treatment with APP based polymeric membrane weighing minimum 3.5 Kg/sqm and minimum 3 mm thick including sealing at pipe joints and reinforced with polyster non woven fabric (wt not less than 150gms/Sqm) laid on primed surface by forced application complete cleaning the surface of foreign matter by wire brushing roughing surface, scrubbing down with water and applying 10mm thick cement mortar screed in CM 1:3 mixed with water proofing compound finished even and smooth with out using extra cement, disposing the debris exceeding 250m distance including dismantling of earthing strips and refixing the same after roof treatment complete all as per manufacturer instructions. Note: WPC shall be measured and paid separately.

S & F MS 2 levers Mortice night latch, size 65 mm connected to steel lockers by joints, screws, fittings etc complete all as specified and directed.

Demolition of Concrete of any description and in any position not otherwise specifically provided for etc complete all as specified and directed.

M&L PCC 1:5:10 type E2 graded M-5 nominal size of graded coarse aggregate in 40 mm and mass concrete at sunken portion etc complete all as specified and directed.

M&L priming plastered surfaces with oil based bituminous primer uniform coat of VG 10 @ 1.2 Kg/sqm over primer @ 0.7Kg/Sqm as per IS-3384:1986,16532,16540:2017 and providing water proofing treatment with APP based polymeric membrane minimum weighing 3.5Kg/sqm and minimum 3 mm thick including sealing at pipe joints and reinforced with polyster non wove fabric (wt not less than 150gms/Sqm) laid on primed surface by forced application complete cleaning the surface of foreign matter by wire brushing roughing surface and scrubbing down with water at sunken portion and applying 10mm thick cement mortar screed in CM 1:3 mixed with water proofing compound finished even and smooth with out using extra cement complete all as per manufacturer instructions. Note:(i) Work carried out for sunkan floor treatment. (ii) WPC shall be measured and paid separately.

Demolition of Brickwork or stone/ boulder masonry, built in lime mortar including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stonework and precast concrete articles etc complete all as specified and directed.

M&L brick work with sub class 'B' bricks old size straight or curved on plan exc 6 mtr mean radius built in CM 1:6 all as specified and directed.

M & L half Brick wall with sub-class 'B' bricks old size straight or curved on plan to any radius built in cement mortar 1:4 complete all as specified and directed.

M&L rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surface on wall, finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surface on wall, finished even and smooth without using extra cement With WPC complete all as specified and directed. Note: WPC shall be measured and paid separately)

Supply only 3% of integral water proofing compound complete all as specified and directed by Engr-in-Charge.

M&L preparation of new surfaces of walls plastered and applying two coats of OBD over a coat of primer complete all as specified and directed.

M&L preparation of new surfaces of walls plastered and applying 3 coats of white wash on walls complete all as specified and directed.

Taking down,Chowkhats or frames not exc. 1.5 sqm each, but with shutters (without taking off shutters from the frames) etc complete all as specified and directed.

S&F of solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling and fixing in opening complete all as specified and directed.

S&F of factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of M.S tubes for top and bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel moulded plain colour PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, & joined together with solvent cement, S&F in the frame at site as per specification and drawing.

S&F 100 mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type C-21.

S&F of extruded aluminium alloy handles fabricated type anodised 125mm.

S&F of aluminium anodised barrel tower bolts of extruded section and fixed 150mm

S&F GI tubes, ‘Medium grade’ with all fittings and fixed complete to walls and ceilings or laid in floors of 20 mm bore including taking up/ down existing GI tubing 15mm bore with fittings and making good the disturbed surfaces complete all as specified and directed.

S&F GI tubes, ‘Medium grade’ with all fittings and fixed to walls and ceilings or laid in floors of 15mm bore including taking up/ down existing GI tubing 15mm dia with all fittings making good the disturbed surfaces complete all as specified and directed.

Supply and fix in repair wash hand basin Vitreous china white flat back size 550x400mm including waste pipe, coupling, grating and other fittings etc, chains and plug and porcelain stopper but including brackets complete all as specified and directed.

S & F for Waste coupling of PTMT (half or full threaded) 32/40 mm as in waste pipe of urinal / wash hand basin complete all as specifed and directed.

Supply and fix in repair 15 mm pillar cock swan neck type chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair Vitreous China squatting pan , "Orrissa" pattern size 580 X 440 mm white with intgrel footrest (excluding flushing cistern & flush pipe) including 'P' or 'S' trap complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair Vitreous china Wash down water closet including seat cover and 'P' or 'S' traps etc complete all as specifed and directed.

S&F in repair Vitreous China urinals, half stall (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; including fixing 15mm CP brass push cock, flush pipe, waste pipe and coupling, grating and Union for discharge pipe etc complete all as specifed and directed.

S&F in repair 15 mm dia brass Stop valves screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

Supply and fixed in repair 15 mm bore Bib taps, fancy type long body chromium plated screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair 125mm dia brass chromium plated shower rose with or without swivel joints including fixing to steel pipe or union complete all as specified and directed.

M & L for Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed, Bore dia of pipe in 15 mm, etc complete all as specifed and directed.

S & F in repair for PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, bore of pipe in 110 mm, etc complete all as specifed and directed.

S & F in repair for PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, bore of pipe in 75 mm, etc complete all as specifed and directed.

S & F in repair PVC (SWR) branch piece, single (single Y) equal or unequal, bore of pipe in 75 mm, etc complete all as specifed and directed.

S & F in repair PVC (SWR) branch piece, single (single Y) equal or unequal, bore of pipe in 110 mm, etc complete all as specifed and directed.

S & F in repair PVC (SWR) branch piece, double (single Y) equal or unequal, bore of pipe in 75 mm, etc complete all as specifed and directed.

S & F in repair PVC (SWR) branch piece, double (single Y) equal or unequal, bore of pipe in 110 mm, etc complete all as specifed and directed.

S & F in repair PVC (SWR) junction single, (Single T) equal or unequal, bore of pipe in 75 mm with access door, etc complete all as specifed and directed.

S & F in repair PVC (SWR) junction single, (Single T) equal or unequal, bore of pipe in 110 mm with access door, etc complete all as specifed and directed.

S & F in repair PVC (SWR) vent cowl, bore of pipe in 75 mm, etc complete all as specifed and directed.

S & F in repair PVC (SWR) vent cowl, bore of pipe in 110 mm, etc complete all as specifed and directed.

S & F in repair 110mm PVC (SWR) WC connector with lip ring, excluding joint, etc complete all as specifed and directed.

S & F in repair PVC (SWR) bends any radius, bore of pipe in 75 mm, etc complete all as specifed and directed.

S & F in repair PVC (SWR) bends any radius, bore of pipe in 110 mm, etc complete all as specifed and directed.

S & F in repair 75mm dia PVC (SWR) bend any radius with access bore complete all as specifed and directed.

S & F in repair 110 mm dia PVC (SWR) bend any radius with access bore complete all as specifed and directed.

Supply and fix in repair PVC connection of length 600mm, 15mm dia with PTMT nuts complete all as specified and directed.

Supply and fix in repair PVC valveless syphonic action type flushing cistern 10 lit capacity low level white with inlet, ball valve, float and handle including brackets and 32mm PVC flush pipe complete all as specified and directed.

S & F for aluminium anodised, Tubular towel rail, 20mm dia, D type, 60cm long between flanges alongwith brackets and fittings, etc complete all as specified and directed.

S & F for Grating doom 100mm dia of PTMT (Minimum weight 25gms), fixed with cement complete all as specified and directed etc complete all as specifed and directed.

M & L for Cast iron Nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), Diameter of outlet in 75 mm, etc complete all as specifed and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc completed all as specified.

M&L rendering 5mm thick in CM 1:3 on brick work or concrete surface on ceiling, finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparing plastered or unplastered ceiling surfaces and priming with alkali resistant priming and applying 2 coats of Oil bound distemper complete all as specified and directed.

Demolition of floor, hearth or wall tiling including cement mortar bedding removing debris off the premises complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, laid over and including cement screed in CM 1:6, 15 mm thick, jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed.

M & L glazed ceramic tiles in dado, 300mmx200mmx7mm thick over 10mm thick back coat in CM 1:4 to receive tiles set and joint in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any guage, thickness, incl nainital or similar pattern in roof coverings.

S & F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and fixing/welding on existing structure with necessary fittings as specified etc completed all as specified.

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified etc completed all as specified.

Taking out old unserviceable wire net of any description from metal frame i.e. Steel windows, ventilators, verandah frame by taking out old flat iron flats and removing the same from site and supply and fixing of stainless steel wire cloth 0.36 nominal dia of wire and avg with aperturre 1.40mm fixed with and incl flat iron fillets 12mm, 3mm with nut bolts complete all as specified and directed.

All as per item 64 above but from wooden frame with and including 2nd class hard wood wooden beads n.exc 3 sq cm cross section complete all as specified and directed.

Taking down carefully existing point wiring of any description light, fan, sockets, bells etc) complete including fittings such as terminal boxes, switches, sockets, ceiling rose, lamp holders, brackets sketch fittings, pendants, fan regulartors and making good the disturbed surfaces, walls, floors etc. all as directed.

Taking down existing sub main wiring /Service wire of any description and size including earth wire and making good disturbed surfaces of walls, floors etc. including one run of 2mm dia bare earth continuity wire all as specified and directed.wiring.

M&L Point wiring for one light point/fan point/bell point controlled by one switch with 1.5 sqmm multistrand copper conductor cable PVC (FRLS) insulated unsheathed copper conductor single core multi stand flexible cable and 1.50 sqmm PVC (FRLS) insulated unsheathed copper conductor single core cable ( green colour) as earth lead in and including 20mm PVC conduit medium grade with all fittings (ISI Marked) suitable for bend tee connecting accessories for Concealed wiring on stone/brick,masonary walls,roof etc including in new MS sunk box of required size and all as directed at site & 2 mm thick plastic laminated sheet for housing switches sockets, regulators etc, including making good the disturbed surfaces to match with the existing specification ,complete all as specified and directed at site .

All as per item no. 68 but for One 3 pin 5/6 Amps switch socket outlet point on independent board complete all as specified and directed at site.

All as per item no. 68 but for One 3 pin 5/6 Amps switch socket outlet point on same board complete all as specified and directed at site.

All as per item no. 68 but for One 3 pin 15 / 16 Amps switch socket outlet point on independent board with 2.5 sqmm PVC (FRLS) insulated unsheathed copper conductor single core multi stand flexible cable and 2.5 sqmm PVC (FRLS) insulated unsheathed copper conductor single core cable (green colour) as earth lead complete all as specified and directed.

M&L switch piano flush type single pole one way 5 Amps omplete all as specifide and directed.

M&L switch socket combination flush type 5 Amps Multipurpose 2 in 1, 3 pin/2 pin with porcelain base all as specified

M&L Switch socket combination 2 in 1 flush type universal 3 pin 5 Amps and 15 Amps omplete all as specifide and directed.

M&L Bell push, flush type, 5 Amps omplete all as specifide and directed.

M&L lamp holder insulated body with back plate suitable for battern fittings omplete all as specifide and directed.

S&F Ceiling rose surface bakelite 65 x 50 mm 2/3 terminais all as specified

S&F Electronic ceiling fan regulator Stepped socket type type AC 240 V all as specified and directed

S&F Sheet metal enclosure MCB distribution board including 200 Amps bus-bar Triple pole and neutral 415V, 4 Ways, including taking down of existing sheet metal enclosure complete all as specifide and directed.

S&F MCB single pole 240 Volts 6 to 32 Amps omplete all as specifide and directed.

S&F MCB Tripple pole and neutral, 40A, 415 Volts AC omplete all as specifide and directed.

Supply and drawn submain wiring with two runs of 4.0 Sq mm single core PVC insulated unsheathed cable 1100 volts grade with multistranded copper conductor drawn through in existing PVC rigid conduit surface/concealed type on walls, floors etc including one run of 4.0 Sqmm PVC insulated copper conductor for earth continuity wire all as specified.

Supply and Fix Ultra modern designed Direct-Indirect downlightning luminaries suitable for POP/GB series ceiling/recess mounting decorative LED Luminaries with which provides soft light and glare free symmetrical illumination suitable for Armstrong/grid ceiling of size 2/2 feet designed for POP/Gypsum BOard false ceiling made up of CRCA sheet, epoxy powder coated complete all connected accessories complete all as specified and directed at site. Make :- Havells Cat No: PLUTO2X1PLR20WLED840S or Eqvt in Philips / Wipro. / CG / Bajaj

Supply and fixing decorative wall light fixtures LED CITY 3 made up of polycarbonate and suitable to fix LED of 15 watts capacity, complete including 01 No of LED lamp 15 Watts, and taking down old unserviceable sketch fittings from the wall all as specified and directed at site. Make- Havells, Cat No- LHDL0160099 or eqvt in WIPRO/PHILIPS

Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25 mtr below ground level) with top edge o the plate not less1.5 mtrs below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts nuts, check nuts and washers of galvanized iron of steel all as shown in electrical plate No.5 connected to earthing test point incl necessary earth work, excavation PCC 1:3:6 type CI using 20mm graded stone aggregate for earth chamber provn of PCC cover 40 mm thick 1:2:4 mm type B1 funnel with water Pipe, GI pipe, 15mm dia medium grade protection pipe, GI earth lead all as specified and directed.

S&F LED tube light fittings 1 x 22 W, 230V, complete with all accessories internally prewired and including LED Tube rod connecting up with twisted flexible PVC copper conductor cable of 23/0.0076 from ceiling rose all as specified and directed. (Make : Cat No.Havelles Code No : REGAL BATTENT8UPT 01X22 WSSBSWH (Batten) CRYSTAL1213T8DSTL18WLED865SGLASS (Tube Rod) or equivelent in Philips / Crompton Greaves)

Supply and fixing LED BULB of 10W for lamp holder all as specified and directed. Make : Havelles or equvalant

Supply and fixing LED security lights New generation energy saving & enviromental friendly long life versitile pressure die cast aluminum roadway luminarie with high power LEDS 25 watts as light source and electronic driver including GI bent pipe 40mm dia with nut and bolts all as specified and directed.

BUILDWEL

SANJEEV CONSTRUCTIONS

m/s s indra reddy constructions

Sri Associates

Sri Lakshmi Enterprises

MRK CONSTRUCTIONS

RAFEEQ AND CO

NAVANAND ENTERPRISES