Development of Yard with bldg. And other civil works at 33 KV S S Bakani

Amount

Stacking of laid crusher broken ballast from yard screening & ralayng of the same in the same yard as per specification in layers not exceeding 15 cm (loose) as per specification including Dressing etc. complete for all lead and lift complete as per direction of Engineer in charge.

Supply, Stacking, spreading, of graded crusher broken hard stone aggregate free from organic matter including stacking & spreading in yard /trenches as per the standard specification of size 40mm to 63mm incl. all lead & lift, transportation , loading, unloading & T&P required for graveling work as per direction of Engineer in charges.incl. Dressing & leveling.

P&F sign board as per approved drawing and specification made of M.S. sheet of 1.6mm thick of size 1200 X 900mm stiffened by fiat 20X3mm on both sides al round the plate & duly framed with 32mm OD Medium M.S. black pipe fixed on frame of 50mm OD medium Pipe (Vertical post 3600mm, 3000mm above ground level with angel iron hold fast 35x35x5mm with Horizontal member 1500mm)to be jointed with flate 40x5mm and post embedded in cement concrete book M-15 grade of 450x450x750mm size below ground level as direction by E/I , all MS will be stove enamted and both lettering , figuring and border on sheet with ready mix synthetic enameled paint of superior quality in required shade and color etc complete in all respect. All section of framed post and steel tubes will be painted with primer and two coats of enamel paint as per specification & Direction of E/I.

Displaying Imporatant Telephone Numbers for Exiting Bldg. wall scraping colour & painting & writing the name & phone no. as per direction of Engineer Incharge.

P&F Concrete interlocking blocks of 80mm thickness of M30 grade manufactured from fully computerized automatic stationary hydraulic vibri pressed machine and fully computerized automatic batching plant of class A-1/A-2 per as per BS:6717:2001. The CC interlocking paving block to be laid on average 20mm thick bed of coarse sand and the joints to be filled by fine sand laying procedure on compacted sub base as defined complete job is to be executed as per the instruction of Engineer in charge. And top surface of tile should be design tile as per engineer in charge the rate to inclusive of all lead and lift & taxes. General specification of blocks . 1. Shape – As specified by engineer incharge 2. Tensile splitting strength & breaking load as per B56717:2001 3. Colour – As approved by Engineer in charge 4. Variation in dimension – must be less than 1.6mm 5. Varition in thickness – must less than 3.2mm 6. Abrasion As per BS 6717:2001 For 100 sqft.