REPAIR MAINT TO DAMAGED ROOF CHAJJA PROJECTION OF BUILDINGS LEAKAGE SEEPAGE TREATMENT ROOFING INTERNAL WATER SUPPLY SYSTEM PLUMBING PERIODICAL SERVICES PLASTERING AND OTHER MISC B R WORKS

Amount

Use and waste of form work fair finished surfaces to sides and soffits of floor or roof beams, lintels, Chajjas, cantilevers etc all as specified and directed.

M&L for Steel reinforcement TMT bars 10mm dia and over cut to length and bent to shape required including cranking, bending spirally for hoping for columns, hooking end and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed .

M&L for Steel reinforcement TMT bars 6mm dia to 8mm dia cut to length and bent to shape required including cranking, bending spirally for hoping for columns, hooking end and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

M&L for Reinforced Cement Concrete (Nominal Mix) 1:1½:3 Type A1 (using 20 mm graded crushed stone aggregate) as in Slab/beam/columns supported on walls, beams and column in floors, balconies etc complete including demolition of reinforced cement concrete all as specified and directed.

M&L for Dismantling/ taking down old existing unserviceable cement plaster, loose/ unsound weaken cement concrete of any description and in any position from existing external / internal surface of RCC roof/ slab/ beams/ columns/ RCC facias for an average depth of 25mm (Approx height 7.5m from natural ground level) with power driven pneumatic flat/pointed chisel and removing the honeycombed area including all the corners and making neat profile of the cavities, roughen the smooth surface , scrapping out/removing corrosion, all loose/scale/rust etc form the visible reinforcement by applying rust remover such as Rust Off 100 of make M/s Sika India Pvt Ltd, or equivalent in M/s Fosroc Chemicals, M/s Choksey Chemicals Pvt., M/s BOSTIk India pvt limited, M/s STP Limited, M/s Thermax Limited( as approved by GE) and cleaning the steel reinforcement properly all as per manufacturers instructions etc complete all as specified and directed.

(a) Providing cement based angle fillet for 75mm X 75mm admixed with Sikacim, integral waterproofing liquid M/s Sika India Pvt Ltd, or equivalent in M/s Fosroc Chemicals, M/s Choksey Chemicals Pvt., M/s BOSTIk India pvt limited, M/s STP Limited, (as approved by GE) @ 0.2% by weight of cement or as per manufacturer’s instructions over a coat of acrylic emulsion bonding agent such as per as Sika Latex in 1:1:3 ratio of Make M/s Sika India Pvt Ltd, or equivalent in M/S Fosrox chemicals, M/s Choksey Chemicals Pvt., M/s BOSTIk India pvt limited, M/s STP Limited, M/s Thermex Ltd (as approved by GE) having specific gravity of 1.02 or as per manufacturer’s instructions with necessary surface preparation such as creating mechanical key like roughing the surface by scrabbing, grit blasting and cleaning the existing surface using high pressure water jet machine having pressure upto 500 bar pressure to remove the dirt, dust, loose particles , wax, effloracence and other contaminations from the surface of RCC columns/ beams/ slabs/ facia/ any brick/ stone surfaces etc all as manufactures and all as specified and directed.

(b) Providing and applying FRIAZINC R, corrosion inhabiliting Active Zinc rich primer of make M/s Sika India Pvt Ltd, or equivalent in M/s Fosroc Chemicals, M/s Choksey Chemicals Pvt., M/s BOSTIk India pvt limited, M/s STP Limited, M/s Thermex Ltd (as approved by GE) along the exposed reinforcement surface properly and allowed to dry.

(c)Providing and applying Hibond, Epoxy based Thixotropic bonding adhesive of Make of M/s Sika India Pvt Ltd, or equivalent in M/s Fosroc Chemicals, M/s Choksey Chemicals Pvt., M/s BOSTIk India pvt limited, M/s STP Limited, ( as approved by GE) over the prepared concrete surface to get a good bonding between existing concrete surface and providing Sika Rep Microcrete 4 Fiber reinforced cementitious repair micro concrete of make M/s Sika India Pvt Ltd, or equivalent in M/s Fosroc Chemicals, M/s Choksey Chemicals Pvt., M/s BOSTIk India pvt limited, M/s STP Limited, M/s Thermex Ltd ( as approved by GE) over Epoxy based bonding agent applied area before 6 Hrs etc including providing necessary proportions , bracing and runners to relieve the member from the load coming on it including scaffolding leak proof shuttering with working platform as required and as per design and pattern complete including preparing the surface to match with the existing surface all as specified and directed.

Note :- The work under (Item No. 5.03 to Item No. 8 of BOQ) shall be carried out through authorized and qualified applicators of any following manufacturer only. MOU to be submitted before commencement of work. M/s Sika India Pvt Ltd, M/s Fosroc Chemicals, M/s Choksey Chemicals Pvt., M/s STP Limited, M/s BOSTIk India pvt limited,M/s Thermax Limited

(i) A performance guarantee certificate for two years shall be submitted by the contractor to the GE on completion of work as specified. (ii) The unit rate quoted for item No. 5 to 5.03 of BOQ is deemed to be included for Removing of accumulated earth of any dimension and depth upto 15 cm cleaning/cutting the grass with hand operated petrol/kerosene driven grass cutting machine and removing the grass waste around 3 m from plinth protection to outside MD land (iii) The Periodicity of cutting of grass shall be before commencement of work and after completion of repair works.

M&L for Water proofing treatment of existing roofs as per details given below after complete removal of existing water proofing treatment and exposed of top surface of RCC slab of any thickness, any type by stripping out old tar felt over roofs, parapets, chimney stacks etc laid horizontally or vertically including taking out layer of cement plaster etc and cleaning the surface with water using wire brush including removing debris outside the MOD land complete all as specified and as directed :-

(a) Dismantling existing cement concrete/ roof tiles on roof including removing debris outside MOD land as directed.

(b) Providing PCC 1:2:4 type B1 using 20mm graded stone aggregates of average thickness of 50 mm to prepare for required scope etc.

(c) Rendering 10mm thick in CM 1:3 on concrete roof surfaces and finish the surface even and smooth without using extra cement mixed with water proofing compound all as per manufacturer’s instructions.Note: WPC measured and paid seperatly.

(d) Surface should be free from any loose paint, dust or grease. Remove all existing bitumen coatings completely by using intense wire brushing, high speed water jet & vacuum cleaner for thorough cleaning of the surface to avoid ‘Peeling off’ problems.

(e) All cracks at corner joints, channels and parapets should be properly treated. For filling cracks upto 3mm crack seal material of M/s Asian paints or equivalent in M/s Dr Fixit or M/s Pidilite or M/s Sika chemical to be used. Bigger cracks, damaged portions & hollow areas be repaired with polymer modified cement mortar.

(f) Apply a coat of self priming smart care damp proof ultra (Code 5698) of M/s Asian paints or equivalent in M/s Dr Fixit or M/s Pidilite or M/s Sika chemical with 33% dilution with water using brush/roller on newly plastered surface after curing as per IS-456 and allow to dry for 4 to 6 hours (dilution & forced coverage requirement strictly as per manufacturer’s instructions).

(g) After the primed surface has dried, apply first coat of water proofing smart care damp proof ultra (Code 5698) of M/s Asian paints or equivalent in M/s Dr Fixit or M/s Pidilite or M/s Sika chemical using brush/roller on the same primed surface & allow to dry for 4 to 6 hours.

(h) Prepare for apply 2nd coat of water proofing smart care damp proof ultra (Code 5698) of M/s Asian paints or equivalent in M/s Dr Fixit or M/s Pidilite or M/s Sika chemical using brush/roller on the same surface. The temp to be maintained 25 to 35° C through out the all above application work.

(j) In case of severe dampness an additional coat of damp proof materials to be applied.

Note for item No 6.6.01 to 6.09:- (i) The work shall be carried out through authorized and qualified applicators of the following manufacturers only. MOU to be submitted before commencement of work. Make : M/s Asian paints or equivalent in M/s Dr Fixit or M/s Pidilite or M/s Sika chemical (ii) A performance guarantee certificate for 10 years shall be submitted by the contractor to the GE on completion of work as specified. (iii) The unit quoted rate is deemed to include taking down of water pipeline, tanks, wires (etc) found on roof and refix at the original position after complete treatment of roof.complete all as specified and directed (iv) The unit quoted rate shall be inclusive of material, all labours, tools and plants including scaffolding required for working upto approx 7.5 mtr height from natural ground level.complete all as specified and directed (v) The unit rate quoted for item is deemed to include for Removing of accumulated earth of any dimension and depth upto 15 cm cleaning/cutting the grass with hand operated petrol/kerosene driven grass cutting machine and removing the grass waste around 3 m from plinth protection to outside MD land.complete all as specified and directed (vi) Adoption of necessary safety arrangement like safety belts, ropes, helmets, netting etc. which are required for safety of working labour at height exceeding 3 to 25 mtr height shall be mandatary and deemed to be included in the unit rate quoted.complete all as specified and directed

M & L preparation old surfaces of exterior wall decorating and water proofing treatment to wall surface by wire brushing in order to remove dust, dirt, loose particles, laitance. Thereafter wash the surface with clean water & allow to dry. Fill visible cracks/ joints by chemistic crack sealer caulking compound & allow to dry for 24 hours. Apply a primer coat of roof guard prime M Seal (water base primer) and allow to dry for 6 hours. Thereafter apply 02 coats of Weather coat ( high build anti carbonating coating cum waterproofing) & shade by brush at the interval of 08 hours between the coat and allow to dry to match the existing shade including necessary scaffolding for any height, covering etc complete all as per specified and directed.

M&L for rendering 10mm thick in CM 1:6 on fair faces of brickwork or concrete surface as on wall finished even and smooth and Taking down old cement plaster on brick or stone walls, or concrete walls etc., hacking for key, scrubbing down with water, etc., including removal of rubbish off the premises complete all as per specified and directed.

M&L for rendering 15mm thick on fair faces of brick/concrete surfaces with two coats i.e. (10mm thick dubbing coat in CM 1:6 and 5mm thick finishing coat in CM 1:4) and mixed with WPC @ 3%, finished even and smooth without using extra cement and Taking down old cement plaster on brick or stone walls, or concrete walls etc., hacking for key, scrubbing down with water, etc., including removal of rubbish off the premises complete all as per specified and directed. Note: WPC will be measured and paid seperately.

M&L for rendering 5mm thick in CM 1:3 on fair faces of any surfaces of ceilling finished even and smooth and taking down cement plaster on ceilings surface etc., hacking for key, scrubbing down with water, etc., including removal of rubbish off the premises complete all as per specified and directed.

Supply only liquid water proofing.

M&L preparation of newly plastered surfaces of ceiling and applying three coats of white washing on ceiling surfaces complete all as specified and directed.

M&L applying two coat of cement based paint over a coat of primer, including preparation of newly plastered surfaces of wall any description, complete all as specified and as directed.

M & L for preparation of new plastered surfaces of walls applying plaster of paris putty of 1 mm thickness over plastered surface to recive finish surface etc and applying two finishing coat of oil bound distemper over a coats of primer.complete all as specified and directed

M&L Repair to ends of chajjas/ parapets by removing old concrete, loose material & cleaning of the reinforcement and finishing the surface with cement mortar 1:3 , finished fair & even and making good (not exc 3Sqm) with existing finishes complete all as specified and as directed. Note: Rate quoted by the tenderer shall deemed to include of double steel scaffolding.

S&F Anodised alunimun of snap grid frame work of for false ceiling and hangers of 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long carrying max load upto 8.1 Kg/Sqcm with 4mm thick designer ceiling board (Lake & Hill) all as per Everest regular T-2430 or equivalent (Make-Ramco/Charminar/Armstrong) including dismantlingting false ceilling all as specified and as directed.

Supplying and laying of 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking out steel/plastic/cpvc water tubing and connections or cleaning for refixing 15 mm/20mm dia etc complete all as sepcified and directed.

Supplying and fixing in repairs of 20mm outer dia Female Brass Threaded Adaptor (FTA/ FBTA CPVC complete all as specified.

Supplying and fixing in repairs 20mm outer dia CPVC brass elbow and all as specified.

S&F Wash hand basin table counter type 560 x 400 x 200MM vitreous china (white) with table top or countersunk embedded in concrete block, including long shank pillar tap, Brass chromium plated waste coupling 32mm bore, Waste pipe , complete all as specified and as directed by Engneer-in-Charge (Make : Cera or equivalent in Parryware/Hindware)

Supply and fixing 15mm bore galvanized steel water tubing, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors including taking down up or down 15mm bore steel tubing galvanized and connection complete all as sepcified and directed.

Supply and fixing 20 mm bore galvanized steel water tubing, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors including taking down up or down 20mm bore steel tubing galvanized and connection complete all as sepcified and directed.

Petty repair to internal/external water inlet GI/CPVC pipe line of any size coming from over head tank to the quarter including socket,elbow,nipple ,with repair to water blockage , pipe line leakage, cleaning internally , removing of air/dust blockage including concealed water tubing etc n exc 3m length of any height using scaffolding and making the water supply good complete all as specified and directed.

M&L Non skid Ceramic tiles 7-8 mm thick, area of each tiles exc 0.09 sqm not exceeding 0.16 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over 15 mm thick screed bed or bedding layer in Cement Mortar 1:6 including dismantling of existing tile floor and removing rubbish off the premises complete all as specified and as directed.

M&L Ceramic wall tiles 7-8 mm thick designed , of size 300 x 450 mm in walls etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over 10 mm thick backing coat in Cement Mortar 1:4 including dismantling existing wall tile and removing rubbish off the premises complete all as specified and as directed.

S&F in repair Premium Wall Bracket for Hand Shower, ø35mm & 100mm Long Round Shape with Nuts complete all as specified and as directed. (Make : Jaquar CAT No. SHA-CHR-555 or equivalent in Parryware/ Hindware)

S&F in repair Hand Wall Mixer 3-in-1 System with Provision for both Hand Shower and Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange (without Hand & Overhead Shower) with Nuts complete all as specified and as directed. Make : Jaquar CAT No. FUS-CHR-29281 or equivalent in Parryware/Hindware

S&F PVC (SWR) pipes single socket in any length with rubber ring joints of 75 mm bore fixed to wall including taking down existing pipes complete all as specified and as directed.

S&F in repair PVC bends 75mm bore complete all as specified and as directed.

S&F in repairs PVC (SWR) floor trap 75mm dia of outlet pipe, plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints of 110 mm bore fixed to wall/floor including taking down existing pipes complete all as specified and as directed.

S&F in repair PVC bends 110mm bore etc complete all as specified and as directed.

S&F in repair PVC (SWR) 110mm junction vent cowl all as specifed as specified and as directed.

S&F in repairs Stack clamps made out of 50 mm x 5 mm flat iron and 110 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 110 mm bore complete all as specified and directed.

S&F in repairs Stack clamps made out of 50 mm x 5 mm flat iron and 75 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75 mm bore complete all as specified and directed.

S&F in repairs Overhead Shower rose ø125mm (Brass Chrome Plated) complete all as specified and as directed.

S&F in repair Angular stop cock, valves high pressure screwed both ends iron pipe or for unioins 15mm dia, complete all as sepcified and directed.

S&F in repair Brass Chromium plated wall mixer for mixing hot & cold water screwed down for 15mm bore iron pipe complete all as specified and directed .

S&F in repair PVC Dual flush ceramic colour cistern , low level, 10 litres capacity, star white with inlet float ball valve, PVC flush pipe and handle, making proper fixing and hanging arrangements (Make: /Parryware/Hindware/ Cera) all as specified and as directed.

S&F in repairs 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, screwed for iron pipe complete all as specified and directed.

S&F in repairs plastic water closet seat cover white or tinted, closed pattern with flat bottom , and cover and mild steel chromium plated or aluminised hinge device etc complete all as specified and directed.

S&F in repairs of chromium plated tubular towel rail 20 mm dia brass D type 60 cm long between flanges complete all as specified and as directed.

S&F in repairs of Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight15mm-90gms) etc complete all as sepcified and directed..

S&F Rimeless Single Piece WC with PP Soft Close slim Seat Cover, Hinges, Dual Flush Cistern Fitting, Fixing Accessories and Accessories Set, Size: 370x665x750 mm, S/P Trap and including all fittings for complete fixed in repair, all as specified and as directed. Make:- Jaquar CAT No. CNS-WHT-853S220SPPSM or equivalent in Parryware/Hindware)

S&F repair Hand Shower (Health Faucet) (ABS Body) with 8mm Dia, 1.5 Meter Long Spirochrome flex tube & ABS wall hook and fixing to pipe complete all as specified and as directed. (Make : Jaquar CAT No.ALD-CHR-587 or equivalent in Parryware/Hindware)

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook etc complete all as specified and as directed.

S&F in repairs of Push tap any colour high pressure of PTMTscrewed for iron pipe and fixed, (Minimum weight 15mm-47gms) etc complete all as specified and as directed.

S&F in repairs of pillar Tap standard of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight15mm-110gms) etc complete all as specified and as directed.

S&F in repairs of Stop Valve standard of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight15mm-90gms) etc complete all as specified and as directed.

S & F in repairs Bib taps fancy type chromium plated with crutch or butterfly handle screwed down screwed for galvanised iron pipe or for brass ferrule and fixed complete for 15 mm bore etc complete all as specified and as directed.

S&F in repairs for Swivel Shower with arm of PTMT any colour and 195mm long bend of 45 degree with flange for fixed with 15mm pipe(Minimum weight15mm-90gms) etc complete all as specified and as directed.

Taking down & re fixing high or low level flushing cistren 10 ltrs capacity & connections to pipes & fixing of chain & pull or lever after cleaning inside of all dirt, scale formation, replacement of rubber washers, syphon set, float valve,stopping of leakage etc complete all as specified and as directed

Supply and fixing in repairs 7 feet 4 pipes pulley operated cloths drying system consisting of aluminium pipe of outer dia 22mm, inner dia 19.80mm, made up of detrin with rope guide mounted on channel pair of length 24 feet (distance between two pipes is adjustable) locking system to hide rope knot, channel to be mounted or fixed with self taping screws provided in kit. Rope will be HDPE double core of 4mm dia fixing to ceiling as specified and directed by Engr-in-Charge and minimum weight of one pipe shall not be less than 0.20kg/RM, minimum weight of rope shall not be less than 7700Gms/unit .

S&F in repairs 40 mm Waste coupling fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed one etc complete all as specified and as directed.

S&F 150 mm dia round/square grating of CP with or without hole including Jointed to PVC pipe etc complete all as specified and as directed.

S&F in repair 32 mm Waste Coupling fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed etc complete all as specified and as directed.

Petty repair to wall mixer,basin mixer,sink mixer etc including replacement of spindle brass, Jumper brass, rubber washer, head etc complete all as specified and as directed.

S&F Vitreous china squatting pan 'Orissa' Pattern size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe ) including provision of lime concrete bedding fixed in repairs all as specified and as directed.

S&F in repair Wash basin vitrous china (flat back and angle back Type) size 580x400mm including taps waste chain and plug and porceline stopper but brackets including cutting for and pinning in ends of brackets or erecting stand with waste pipe ,fixed etc complete all as specified and as directed.

S&F Vitreous china wash down water closet pan (pedestal pattern), white (exluding fixing bolts,flushing cistren and flushpipe) and including seat cover for pedestal pattern complete fixed in repair, all as specified and as directed.

Providing and injecting chemical for post constructional Anti TermiteTreatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same all as specified and directed.

S&F Single Piece Bowl With Cistern For Coupled WC with UF Soft Close Slim Seat Cover, Hinges, Dual Flush Cistern Fitting, floor mounted type And Fixing Accessories, Size: 380x655x765 mm, S or P Trap- 180 mm and including all fittings for complete fixed in repair, all as specified and as directed. (Make : Jaquar CAT No. LYS-WHT-38751P180UFSMZ or equivalent in Parryware/Hindware)

M&L for Preparation of old decorated plastered or unplastered surface of wall, brooming down or steel wire brushing down smoke soot, moulds mass, efflorescent , trading, oil, greasy spots and applying one coat oil bound distemper complete all as specified and as directed.

M&L for Preparation of old decorated plastered or unplastered surface of wall, chajja,ceiling, balcony, facia etc., brooming down or steel wire brushing down smoke soot, moulds mass, efflorescent, trading, oil, greasy spots and applying one coat of white wash complete all as specified and directed.

M&L for Preparation of old plastered surfaces of wall by using pressure washer, removal all dirt and dust and applying one coat of exterior emulsion weather proof paint complete all as specified and as directed. Note:-(i) Cost of scaffolding required deemed to be included in the quoted rate of item and nothing extra shall be admissible on this account.

M&L for Preparation of old painted wood or wooden based surfaces of any description and applying one coats of synthetic enamel paint using mechanical means, not otherwise described over 10 cm width or girth, complete all as specified and directed.

M&L for Preparation of old painted surfaces of steel and applying one coat of synthetic enamel paint using mechanical means over 10 cm width or girth, not other wise described complete all as specified and as directed.

M&L for Preparation of old decorated surfaces of walls by using pressure washer, remove all dirt & dust ,applying one coat of wall care putty and then and applying two coats of premium oil bound distemper over one coat of primer as per manufauture instruction of required shade complete all as specified and directed. Note:-(i) Cost of scaffolding required deemed to be included in the quoted rate of item and nothing extra shall be admissible on this account.

M&L for Preparation of old decorated plastered or unplastered surface of wall, brooming down or steel wire brushing down smoke soot, moulds mass, efflorescent , trading, oil, greasy spots and applying one coat of cement based paint complete all as specified and as directed.

M&L Preparation of old concrete/Asbestos/GI Sheet/Cement/Plaster surfaces by brooming down or steel wire brushing down and applying one coat of synthetic enamel paint complete all as specified and as directed.

S&F in repairs Powder coated aluminium (minimum thickness of powder coating 50 micron) frame work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws,included rubber beading all complete as per architectural drawings etc complete all as specified and directed.

S&F in repairs powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodisedaluminium fittings such as peg stays150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, star lock, included rubber beading all complete as per architectural drawings etc complete all as specified and directed.

S&F 4 mm thick sheet glass ordinary quality and glazing complete in square n exc 0.50sqm each complete all as specified and directed.

S&F frosted glass 4.0mm thick, pin head type n exc 0.5 sq.m in each pane and fixed. complete all as specified and directed.

S&F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm complete all as specified and directed.

S&F in repair Hand Shower ø105mm Round Shape Single Flow with Air Effect (ABS Body & Face Plate Chrome Plated) with Rubit Cleaning System complete all as specified and as directed. (Make : Jaquar CAT No. HSH-CHR-1717 or equivalent in Parryware/Hindware)

S&F in repair Hand Shower Flexible Tube 12mm dia & 1.5M Long with Nuts complete all as specified and as directed. (Make : Jaquar CAT No. SHA-CHR-549D12 or equivalent in Parryware/Hindware)

S & F in repair 18/19 mm thick ,water proofing plywood , fixed to Cupboard work in any position with nails complete all as specified and as directed.

S&F in repair Auto closing hinges of size of approved pattern and make suitable for cupboard complete all as specified and as directed.

S&F in repair Stainless steel handles of size 100 mm of approved pattern and make suitable for Cupboard complete all as specified and as directed.

S&F Decorative laminated sheet of 1 mm thick and colour and pattern as approved complete all as specified and as directed.

S&F PVC beading for cupboard work, colour and pattern as approved complete all as specified and as directed.

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws & included dismantling of any type of sheets in roof coverings complete all as specified & directed

S & F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws & included dismantling of any type of sheets in roof coverings complete all as specified & directed

M&L Virified Ceramic tiles 10 mm thick, light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over 15 mm thick screed bed or bedding layer in Cement Mortar 1:6, complete including dismantling of existing tile floor and disposal of rubbish outside MD land all as specified and as directed.

M&L Virified Ceramic tiles 10 mm thick, light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in vertcal surfaces such as skirting/ dedo etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over 10mm thick backing coat in CM 1:4, complete including dismantling of existing wall tile and disposal rubbish outside MD land all as specified and as directed.

Petty repairs for refixing the existing Wash hand basin and Sinks made out of stainless steel 1mm thick including fixing cantilever CI/Angle iron brackets embedded in concrete block, connecting waste coupling 32mm bore, bedding, waste fitting, waste pipe in cement mortar on to dwarf wall and connecting union to pipe, filling gap in white cement and all neccessary fittings (taking down and refixing in same position) complete all as specified and directed.

M&L for 18-20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms, shelves in cupboard,handwash places and like including necessary cutting and grooving to walls and making good by pointing in cement mortar (1:2) using admixture of pigment to match with shade of granite laid over 15mm thick screed bed in Cement Mortar 1:6, colour of granite as approved incl removal of old all as specified and directed. Note:- (i) Dismantling of stone slab and tiles laid bedded and pointed in any mortar of any discription of thickness in floor (i) The unit rate is deemed to be included for rounding to edges of facing & sides of stone slabs.

M & L for 100 mm thick PCC 1:2:4 type B-2 (using 40 mm graded crushed stone agg) as in PCC in Hard standing etc. with , spike rolling ,or making impression of expanded metal, while the concrete is green including demolition of cement Concrete (un reinforced) of any description and in any position not otherwise specifically provided etc complete all as specified and directed

S&F Rotational moulded polythene water storage tank of 500 Ltrs capacity (three layer white colour) cylinderical vertical with closed top including 3 Nos GI check nuts and tank nipple of 25mm bore for inlet and outlet, 25mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball hoisted and fixed in position all as specified in SSR part -I including taking down of old unserviceable tank with its connected items etc complete all as specified and directed.

Grinding of existing mozaic/kota stone/tiles in wall/flooring including mirror polishing, cleaning of tiles/granite and joints filling and apply white cement, including grouting of floor trap surroundings with white cement complete all as specified and directed.

M&L pre-cast PCC 1:3:6 type C1 (20 mm graded agg) cement concrete block masonry with solid blocks exc. 10cm in width and set in cement mortar 1:6 including demolition of old damaged brick work / stone masonry/PCC block built in cement mortar of any description as specified and directed.

M & L rendering 15 mm thick in cm 1:4 on brick surfaces finished even and fair with out using extra cement, complete all as specified and directed

M&L Preparation of newly plastered surfaces of walls and applying two coats cement base paint on walls over a coat of alkali resistant primer.complete all as specified and directed

S&F in repair PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and directed.

S & F in repair Ball valves 25mm bore high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe & fixed. (minimum weight -210 gms) complete all as specified and directed.

S&F in repairs 40mm bore unplasticised PVC pipe of pressure rating 10 kgf/Sqcm fixed complete to walls, ceiling or laid in floors complete all as specified and directed.

S & F in repair PVC waste pipe 32 to 40 mm dia and length not less then 90cm for WHB/Sink/Urinal up to floor trap and fixed complete all as specified

M&L Petty repairs to leakage in bib taps, pillar cock, stop cock, angle valve, concealed stop valve, bottle trap of any description by replacing the PVC washers/ Sheet washers,spindle brass,jumper brass or any other minor accessories items etc complete all as specified and directed. Note :- An amount of Rs 18935.00 on account of credit schedule for schedule 'A' part II shall be deducted from the total amount of BOQ to arrive at the contract sum.

SRI MAHALAKSHMI CONSTRUCTIONS

SRI GANESH ENTERPRISES

LAKSHMI CONSTRUCTIONS

SRI LAKSHMI VENKATESHWARA ENTERPRISES