Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹47.4 LAccepted-AOC ASHIRBAD APARTMENT GANDHI S HOUSE RAMKRISHNA ROAD ASHRAMPARA SILIGURI 01 | L1 | Accepted-AOC L1 bidder | |
| 2 | L2₹49.7 L+₹2.0 L (4.29%)Rejected-Finance EAST VIVEKANANDA PALLY MANGAL PANDEY SARANI PO RABINDRA SARANI SILIGURI 734 006 WB | JALPAIGURI | WEST BENGAL | 734006 | L2 | Rejected-Finance Not being Lowest bidder | |
| 3 | L3₹50.0 L+₹2.4 L (4.95%)Rejected-Finance 30 HAREN MUKHERJEE ROAD HAKIMPARA SILIGURI 734 001 DARIEELING WB | DARJEELING | WEST BENGAL | 734001 | L3 | Rejected-Finance Not being Lowest bidder | |
| 4 | L4₹50.0 L+₹2.4 L (4.97%)Rejected-Finance VIVEKANANDA SUPER MARKET IST FLOOR ROOM NO 8 HILL CART ROAD PO SILIGURI DIST DARJEELING PIN 734401 | DARJEELING | WEST BENGAL | 734401 | L4 | Rejected-Finance Not being Lowest bidder | |
| 5 | L5₹50.2 L+₹2.6 L (5.41%)Rejected-Finance 54 SATYEN BOSE ROAD DESHBANDHUPARA SILIGURI 734 004 | JALPAIGURI | WEST BENGAL | 734004 | L5 | Rejected-Finance Not being Lowest bidder |
Tender Value
₹42.9 L
EMD Value
₹85,840
Closing Date
24 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Sukna
Garrison Engineer Sukna, Post-Simulbari, Dist.-Darjeeling, WB-734009
SPL REPAIR TO BLDG NO. T 165 OF ASC BN AT U AREA UNDER SUKNA MIL STN AND CERTAIN OTHER SANCTIONED WORKS IN SUKNA MIL STN UNDER GE SUKNA
2023_MES_626360_1
GE Sukna/8591
Open Tender
Civil Works
Works
270 days
Sukna
All as per tender documents
8 documents required · 8 mandatory
₹500
GE Sukna
₹85,840
Yes
5 Feb 2024
2 Nov 2023
25 Nov 2023
2 Nov 2023
24 Nov 2023
17 Nov 2023
3 Nov 2023 - 24 Nov 2023
Amount
Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in Soft/ Loose soil complete all as specified and directed.
Removing Excavated soils not exc 50 M and depositing where directed at a level not exc1.5 M above the starting point complete all as specified and directed.
M & L for Hardcore of gauge not exc. 63 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and directed.
M&L for Plain Cement Concrete Type C1, 1:3:6 with using 20mm graded stone aggregate as in kerbs for sides of path, water troughs and the like including weathering, slightly rounded or chamfered angles and throating and includes formwork straight or curved complete all as specified and directed.
M&L providing precast cement concrete 1:2:4 Type B1 (using 20 mm graded stone aggregate) in lintels upto 1.5m clear span, window or door cills, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in cement mortar 1:4 complete with joints to match including necessary formwork or moulds etc. complete all as specified and as directed.
M&L for Reinforced Cement Concrete Type B-1 1:2:4 (using 20 mm graded stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, deck slabs and in shelves and the like complete all as specified and directed.
Supply only integral water proofing compound complete all as specified.
M & L for brick work with sub class ‘B’ old size bricks straight or curved on plan n.exc. 6.00 m mean radius built in cement mortar 1:6 complete all as specified and directed.
M&L for Brick work with sub-class `B' bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.
M&L for rough finished flat form work to soffits of suspended slabs such as roof slabs, floor slabs and similar work not exc. 200 mm thick (horizontal or sloping) work as rough finished surfaces of concrete complete all as specified and directed.
Taking down chowkhats or frames area not exc. 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.
Taking down chowkhats or frames area exc. 1.50 Sqm but not exc. 4.00 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of mild steel tubes for top & bottom rails, mild steel frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of wire gauze in lieu of plain colour PVC sheet. The wire gauze shall be wrapped on an additional square 8mm MS Solid tube and this tube shall be welded to MS tubes. The wire gauge shall be stretched to tighten firmly, suppling & fixing in the frame at site as per specification & drawing as per specification and drawing given on MES schedule Part – II (2010) complete all as specified and directed.
S&F 30mm thick flush shutters, solid core construction, with MDF board exterior grade and both face is covered with decorative face veneer with 6mm thick teak wood lipping/frame to match all as specified and directed.
S&F 150mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed.
Supply and fix 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed.
S & F 100 mm long medium weight, cold rolled mild steel Butt hinges with screws complete all as specified and directed.
S & F 300 mm long ordinary rat tail pattern springs including roller and roller plate complete all as specified and directed.
S&F 150 mm Aluminium handles cast type, anodised and fixed complete all as specified and directed.
S&F 125 mm Aluminium handles cast type, anodised and fixed complete all as specified and directed.
S & F Floor door stopper of Aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, Overall length of cover plate 140 mm complete all as specified and directed.
S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned stacks, or stainless steel wire staples complete all as specified and directed.
S&F Decorative curtain rod of wooden finish powder coated of 25mm dia including six nos curtain ring per running metre complete all as directed and specified.
S&F Decorative type wooden finish double brackets support for holding curtain rods and corner to be fixed to ends of curtain rod fixing with screws complete all as specified and directed.
S & F Mild steel work in framed work such as grills, gratings,framed guard bars, ladders etc., with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.
M&L for Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed.
M&L for Mild TMT bars 6 mm to 8 mm dia., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed.
S&F rolled mild steel in plates, gusset plate (plain or chequered) channels square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment conforming to Fe-410W (Gde-E-250) quality-A complete all as specified and directed.
S & F of steel work as in tubular trusses including special shaped washers etc. complete using ERW or induction butt welded tubes conforming to IS – 1161 – 1998 grade St – 240 complete all as specified and directed.
S & F Steel windows with side hung shutters including box type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.
S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dove-tailed or welded complete all as specified and directed.
S&F Pressed steel frame size 125 x 60mm (PBI sheet 1.25 mm thick) for doors with one or more rebates including necessary fixing lugs, medium weight hinges( 125mm- 03 Nos for each leaf and 75mm-01 No for stopper of each leaf) lock strike plate, hold fast etc., including filling frame with PCC 1:3:6. type C-0 (using 12.50 mm stone aggregate), complete all as specified and directed.
S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm TCT (total coated thickness) of any colour having tensile strength of 550 Mpa as in roof covering cladding to wall etc, fixed with self tapping screws complete all as specified and directed.
S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm TCT (total coated thickness) of any colour having tensile strength of 550 Mpa as in roof covering cladding to wall etc, fixed with self tapping screws complete all as specified and directed.
S&F 4 mm thick pre-painted E-fibre board Designer/Decorative fixed or laid/ inserted to Anodised aluminium snap grid frame size 605x605 mm work for false ceiling Hangers with 6 mm dia. G.I. (length as required) adjusting level fixed to roof slabs/truss by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long including necessary dimantling of existing unserviceable ceiling boards of any thickness including cover fillets complete all as specified and directed.
M&L 75 mm thick, PCC 1:3:6, type C-2, (using 40 mm graded crushed stone aggregate) as in plinth protection, hardstanding, floors, paths, etc, finished even and smooth without using extra cement complete all as specified and directed.
M&L for 100 mm thick cement concrete, type D 2, 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring finished rough to receive finishes complete all as specified and directed.
M&L 25 mm thick, PCC 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) as under tile floors complete all as specified and directed.
M&L coloured glazed ceramic tiles 350x450x7 mm thick as in dado / skirting and vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick backing in CM 1:4 including dismantling of old tiles surface complete all as specified and directed.
M&L Non Skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.11 sqm but n. exc. 0.18 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15 mm thick in CM 1:6 and dismantling complete all as specified and directed.
M&L cement concrete chequered tiles 300 x 300 x 25 mm thick as in floors, set and jointed over and including 15 mm thick screed bed in CM 1:6 and pointed in grey cement and pigments to match the colour of tile complete all as specified and directed.
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.
M&L Rendering 15 mm thick on fair faces of brick work or concrete sur-faces in cement mortar 1:4 using water proofing compound @ 2% by wt of cement for finished even and smooth (without using extra cement) complete all as specified and directed. Note :- (WPC will be measured and paid for separately)
Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.
M&L preparation of new plastered wall surfaces and including applying two coats of oil bound distemper over a coat of primer and over a thin layer of wall care putty to obtain smooth finish complete all as specified and directed.
M&L preparation of new plastered wall surfaces and including applying two coats of cement base paint over a coat of primer complete all as specified and directed.
S & F Sheet glass 3.0 mm thick, ordinary quality and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane glazed with putty or fixed with beads complete all as specified and directed.
M&L preparation of new wooden surfaces of any description, not otherwise described over 10 cm width or girth and including applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L preparation of new steel surfaces of any description, not otherwise described over 10 cm width or girth and including applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L preparation of new steel surfaces of any description not exceeding 10 cm width or girth when unconnected with other painting or when painted in a different tint and including applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and directed.
Demolition of cement concrete (un-reinforced) in ground floor and paving not exc. 15 cm thick (Below or above ground level) complete all as specified and directed.
Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for complete all as specified and directed.
Dismantling Unframed timber scantlings 40 Sq. cm and over in section and in any position in framed work complete all as specified and directed.
Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.
E/M PORTION
M&L in repairs point wiring with 1.5 sqmm single core, PVC insulated, unsheathed FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including non-metallic, rigid non mettalic PVC conduit (medium grade) concealed in wall / ceiling with and including 1.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) with cast Iron / pressed steel terminal boxes 60 mm deep, on walls with 3 mm thick plastic laminated / hylam sheet cover, fixed on wall / other surfaces with brass screws for mounting or housing switches, socket outlets, fan regulators, etc. including all other fixing accessories for one light / fan / exhaust fan / call bell point controlled by one 5 / 6 Amps switch and including cutting chasing (as required) and making good the disturbed surfaces including finishes to match with adjacent surfaces complete all as specified and directed.
All as per Sl. item No. 57.00 above but for one 16 Amps socket outlet point on independent board with 2.5 sqmm cable and 2.5 sqmm earth wire
All as per Sl. item No. 57.00 above but for one 5 / 6 Amps socket outlet point on independent board.
All as per Sl. item No.57.00 above but for one 5 / 6 Amps socket outlet point on same board.
S&F switch piano, single pole, one way, 5 / 6 Amps 240 volt complete all as specified and directed.
S&F switch socket combination 3 pin 15 Amp, flush type universal complete all as specified and directed.
S&F switch socket combination 3 pin 5 Amp, flush type universal complete all as specified and directed.
S&F socket outlet 5 pin 5 / 6 Amps, 240 volts universal type complete all as specified and directed.
S&F ceiling rose, surface bakelite 65 x 50 mm three terminal complete all as specified and directed.
S&F angular lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings complete all as specified and as directed.
S&F stepped type electronic fan regulator two module, with 5 step, AC 50 Hz 240 Volts grade, 100 W, complete all as specified and directed.
S & F MCB SP,10KA, 230V, C-curve, 10-20 amps complete all as specified and directed.
S & F MCB SPN 32 Amps 240V ,50 Hz ,breaking capacity 10 KA," C " series, complete all as specified and directed.
S&F in replacement (including taking down Switchgears) MCB DB, SPN 12 way, IP-43, IK 09, single door type with metal door, with 200A copper neutral and earth bus bar for fixing MCB, fixing flush to wall & making good the disturbed surfaces complete all as specified and as directed.
M & L concealed sub main wiring with 2 runs of 2.5 sqmm main wire along with 1 run of 2.5 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC conduit (medium grade) with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the disturbed surfaces including finishes to match with adjacent surfaces complete all as specified and directed. NOTE:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length.
M & L concealed sub main wiring with 2 runs of 4 sqmm main wire along with 1 run of 4 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC conduit (medium grade) with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the disturbed surfaces including finishes to match with adjacent surfaces complete all as specified and directed. NOTE:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length.
M & L concealed sub main wiring with 2 runs of 6 sqmm main wire along with 1 run of 6 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC conduit (medium grade) with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the disturbed surfaces including finishes to match with adjacent surfaces complete all as specified and directed. NOTE:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length.
S&F in repairs of surface & wall mounted LED Bulk head light fittings with 9/10 w indoor / outdoor luminaries with and including electronic driver and LED Lamp, pre-wired including necessary electric connection from ceiling rose to light fitting, conforming to the following specification :- (i) System watts/lumens :- 9 to 10w/Total system lumen not less than 800 Lm. (ii) Housing :- Extruded polycarbonate / engineering plastic (iii) IP rating :- IP 65 (iv) Front cover :- PRISMATIC DIFFUSER (v) Mounting :- Suitable for wall / ceiling mounting (vi) Finish :- Smooth finish (vii) Lamp :- SMD LED high bright (viii) Heat sink :- As per OEM's design
S&F in repairs of surface & wall mounted LED tube light fittings 4 feet with 18/20 w indoor luminaries with and including electronic driver and LED lamp, pre-wired including necessary electric connection from ceiling rose to light fitting on existing point or new points all as directed by the Engr-in-charge, conforming to the following specification :- (i) System watts/lumens :- 18-20 W/Total system lumen not less than 2000 Lm. (ii) Housing :- Extruded polycarbonate (iii) IP rating :- IP 20 (iv) Front cover :- Acrylic / polycarbonate cover frosted (v) Mounting :- Suitable for wall / ceiling mounting (vi) Finish :- Smooth finish (vii) Lamp :- High bright LED (viii) System efficacy (lm/Watt) :- Not less than 100 lm/Watt (ix) Colour temperature :- Not less than 5700k (x) Colour rendering index (CRI) :- Not less than 80 (xi) Life :- Not less than 25000 hrs of operation (xii) Optics :- Designed for optimum light distribution (xiii) Conrol gear :- Inbuilt electronic driver with APFC, PF not less than 0.95, and THD not more than 20% of the standard operting voltage 180-270V AC, 50 Hz (xiv) Surge protection :- Inbuilt surge protection minimum 2KV (xv) Heat sink :- As per OEM's design
Supply and fix in repair of energy saving BLDC ceiling fan complete with all connected accessories as specified below: - Input Power: - 26 watts with full speed and reduced power consumption with reduced speed technology. Voltage: - 90-300 V AC, 50Hz, single Phase. RPM: - 340 to 375 rpm Blades: - Decorated Sweep: - 1200 mm. Air delivery: - Not less than 210 CFM Colour: - Glow white/Toast Brown/Gloss Black/or others as approved by Engr-in-Charge Speed/power control: -Without Remote through existing regulator. Star rating: - BEE 5 Star Rating Warranty: - As specified by the manufacturer, contractor shall produce original warranty and test certificate from the manufacturer. Note :- Old ceiling fan to be deposited to mes storeyard without any extra cost
S&F in repairs Ceiling recess mounting LED 2X2 luminaire of capacity 36W glare free LEDs complete with all acessories internally prewired suitable for sigle phase 230 volts 50Hz AC supply including connecting up eith suitable size of wire complete all as specified and as directed.
M &L of Earthing with galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick, buried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 Mtr below ground level connected using galvanised iron earth lead wire 4 Sq mm as earthing electrode by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe (medium grade) and other end connected to earthing test point as directed including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C both ways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth up to a distance not exceeding 50 Mtr etc all as shown on electrical plate No. 5 of MES Schedule Part-I complete including testing on completion. On testing after completion if the desired earth resistance is not obtained the earthing will be made again by the contractor at no additional cost complete all as specified and directed.
Supply install commissioning & testing of hi wall split-type Air conditioner unit of capacity 1.5 TR of higher rating based on Inverter Tecnology comprising of variable speed copper compresser suitable for adjusting power depending on heat load including indoor & outdoor units complete with cordless remote control unit & with in-built stabilizer free operation & PM 2.5 fiter etc for better indoor air quality with 5 star rating including electric connection complete all as specified and directed. NOTE:- (i) The Air conditioner shall be initial filled// charged with refrigerant of specified quantity & the refrigeerant to be used shall be Non-CFC type & as per the latest technology. (ii) The cost of additional refrigerant pipes required (if any) is deemed to be included in the unit quoted rates. (iii) Suitable piping of adequate length & size for drainage of condensate water from indoor unit shall be provided & the cost of the same is deemed to be included in the unit quoted rates. (iv) The overall product warranty should be 1 yrs, PCB warranty 5 yrs & compressor Warranty 10 yrs. (v) Installation, commissioning & te4sting of the Split ACs is to be carried out from the Auth Service Dealer/ Firm & cost of the same is deemed to be included in the unit quoted rates. (vi) Anything missed out in the technical specifications but technically required for efficient working of the AC is deemed to be included in the unit quoted rates. Make : LLOYD / HITACHI / BLUE STAR / CARRIER
S & F window type air conditioner of capacity 1.5 Tonne & BEE 5 Star rating, Self diagnosis fuction, 100% copper restart, cool even @ 48 degree centigrate complete all as specified and directed. Make : Blue Star/ Voltas/ Hitachi/ Daikin/ Canters/ Lloyd (Havells).
Supply and install 3.0 Ton tower AC floor standing type, auto start including complete accessories (copper pipe nitrile insulation, Drain pipe etc) complete with cordless remote control unit minimum 5 star rating. Make: Voltas, Llyod, Dakin, Blue Star.
PS ENTERPRISE
MS ORIENT ENGINEERING WORKS
M/S JAGRITI ENTERPRISES
M/S G S ASSOCIATES
M/S TANDRA DEY.
M/S EASTERN ENGINEERING
MS ESSCON
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .