Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.0 LAccepted-AOC KOTHI NO 766 PHASE III MODEL TOWN BATHINDA PB | L1 | Accepted-AOC Awarded being 1st Lowest Bidder | |
| 2 | L2₹19.9 L+₹32,919 (1.68%)Rejected-Finance HOUSE NO 8 589 BEHIND PHC HOSPITAL OLD BUS STAND KORBA KORBA CHHATTISGARH 495678 | 495678 | L2 | Rejected-Finance L2 | |
| 3 | L3₹21.9 L+₹2.3 L (11.9%)Rejected-Finance | L3 | Rejected-Finance L3 | |
| 4 | L4₹25.3 L+₹5.7 L (29.0%)Rejected-Finance | L4 | Rejected-Finance L4 | |
| 5 | L5₹27.4 L+₹7.8 L (39.8%)Rejected-Finance MCB Z 5 04939 GURU GOBIND NAGAR BATHINDA BATHINDA PUNJAB 151001 | BATHINDA | PUNJAB | 151001 | L5 | Rejected-Finance L5 |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
21 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Vinod Kumar AE (Civil) AGE BR II Offg GE(S) Bathin
GE(S)Bathinda Bathinda Mil Stn
GE(S) BTD TOKEN NO 28 OF 2023-24 COMPREHENSIVE MAINT INCLUDING DAY TO DAY COMPLAINTS TO CERTAIN BLDGS TO OR JCO MD ACCN INCLUDING EM REPAIR IN KARAM SINGH ENCLAVE UNDER AGE BR II UNDER GARRISON ENGINEER (SOUTH) BATHINDA AT BATHINDA MILITARY STATION
2023_MES_610496_1
GE(S)/BTD/TOKEN NO 28 OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
GE(S)Bathinda
Class D
category a(i)
11 documents required · 11 mandatory
₹500
GE(S)Bathinda
₹98,000
Yes
23 Sept 2023
24 Jul 2023
23 Aug 2023
24 Jul 2023
21 Aug 2023
7 Aug 2023
Amount
Taking down chowkhats or frame with shutter (without taking off shutters from the frames) not exceeding 1.5 Sqm each and removal from site complete all as specified and as directed.
Supply and fixing factory made PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, all as specified in Preamble 8B. 3.1 of SSR Part -II (2010) and all as shown on drawing of SSR Part-II (2010) including making good the disturbed surface with cement plaster 1:6 and matching the colour of new plaster with existing surface complete all as specified and directed. complete all as specified and directed .
Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the frame at site all as per instruction and drawing shown for item No 8080 of SSR Part II on Sl Page No 156. complete all as specified and as directed.
Supply and fixing 100mm long extruded aluminium anodised butt hinges with galvanised mild steel screws complete all as specified and as directed .
S&F aluminium anodised 150mm long barrel tower bolts of extruded section, (ISI marked) complete all as specified and as directed .
S&F aluminium anodised handles, 125 mm long, cast type, (ISI marked) complete all as specified and as directed .
Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but not exc 4 Sqm each complete all as specified and as directed.
S & F pressed steel frames for doors with one or more rebates including hinges, lock strike plate, fixing lugs, etc., size of frame 125 x 60mm, including making good the disturbed surface with cement plaster 1:6 and matching the colour of new plaster with existing surface complete all as specified and directed.
S & F pressed steel frames for doors with one or more rebates including hinges, lock strike plate, fixing lugs, etc., size of frame 105 x 60mm, including making good the disturbed surface with cement plaster 1:6 and matching the colour of new plaster with existing surface complete all as specified and directed.
S & F Powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.
All as per Srl item No 10 above but steel ventilators top hung. etc complete all as specified and as directed.
S & F Powder coated Anodised aluminium window and ventilator shutters,glazed/guazed side/top hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed.
S & F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/ pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and as directed.
Supply and fixing mild steel framed work such as cooler stand, grill gratings, etc. with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed
M & L for PCC 1:3:6 type C1 (20mm graded crushed stone aggregates) as in filling back of pressed steel door frames/chowkats and for fixing hold fasts, etc., complete all as specified and directed.
Taking down shutters of any description exceeding 1.0 Sqm but not exceeding 2.0 Sqm each and removal from site complete all as specified and directed.
S&F 35mm thick factory made panelled shutter (two panel) plain framed with lock rail and panel of 12mm thick plywood commercial type and chemically pressure treated of second class hard wood rails and styles and the size of rail and style as per IS-1003(Part I) complete all as specified and as directed.
Supply and fixing 35 mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), using 2nd class hard wood (Bonsum / Hollock), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed. Note - Wire gauze / glass to be measured and paid separately
Supply only 100mm mild steel Butt Hinges, medium weight, cold rolled fixed with screws/welding to wooded/steel frames or chowkats, complete all as specified and directed.
Material and Labour for painting to new wood and wood based surfaces of any description, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel paint over a coat of pink primer including preparation of surfaces complete all as specified and as directed.
S & F MS galvanised mild wire cloth 0.56 mm nominal dia of wire and avarage width of aperture 1.18mm and fixed with tinned tacks to galvanised wire stapple complete all as specified and directed.
S&F in repairs Mild steel galvanised wire cloth 0.56mm nominal dia of wire and 1.18 mm average width of aperture fixed with tinned tacks or galvanised wire staple, complete all as specified and as directed.
Supply and fixing Aluminium alloy, anodised, sliding door bolt with hasp, staple, length bolt 300mm, (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and as directed.
Supply and fixing 150mm long mild steel barrel tower bolts, stove enamelled black with bright bolts and fixed (ISI marked) complete all as specified and as directed.
Supply and fixing 150mm long mild steel pressed handles, oval type, stove enamelled black (ISI marked) complete all as specified and as directed
Supply only 3.0mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.50 Sqm in each pane complete all as specified and directed.
Supply only 3.0mm thick figured glass, pin head type and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane complete all as specified and as directed.
Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/springs clips and providing and fixing new ones complete all as specified and directed.
Dismantling existing broken unserviceable PVC tank of capacity 500 Ltrs. etc complete all as specified and as directed.
Supply and fixing in repair three layers 500 litre HDPE water storage tanks polyproof. white in colour rotational moulded polyethylene (cylindrical vertical with closed top) hoisted and fixed in position including Supply and fixing of suitable size inlet/outlet arrangement & other accessories complete all as specified and directed.
Supply and fixing in repair ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of size 20mm bore ( weight 210 gms Minimum) complete all as specified and as directed.
S&F in repair 15mm Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.
S & F in repair plastic water closet seat cover, white/ivory colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device
S & F in repair PVC connections 15 mm bore, 450 mm length, heavy duty, with PTMT nuts complete all as specified and as directed.
Dismantling floor, hearth or wall tiling/terrazzo finish etc including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
Material and labour for joint free non-skid coloured ceramic tiles 7-8 mm thick (square / rectangular), area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white cement with pigment or coloured cement to match the shade of tiles over and including 15 mm thick screed plaster in CM 1:4 complete all as specified and as directed .
Material and Labour for joint free glazed ceramic coloured tiles of approved quality in vertical surfaces 450mmx300 mm x7mm/ 600mm x 300 x 7mm thick set jointed in neat cement slurry/paste and pointed in coloured cement to match with the tiles over and including 10mm thick plaster in CM 1:4 complete all as specified and directed.
Material and Labour for Non skid floor tiles, colored, of size 600x600x7mm thick or of size as approved as in floors set and jointed in neat cement slurry and pointed in white cement with pigments to match over and including the provision of 10 mm thick bedding layer in cm 1:6 complete all as specified and directed.
Description all as per Ser item No 39 above but on vertical surfaces as in skirtings etc on 10mm thick back coat in CM 1:4, complete all as specified and as direcetd.
Demolition of cement concrete (unreinforced) including tiles of any description & terrazo finish, etc. not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.
M&L for 75 mm thick cement concrete type D-2, 1:4:8 (40mm graded agg) as in Sub-base to floor finishes complete all as specified and directed.
M&L 25mm Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.
S&F Machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed.
M&L Precast cement concrete type B-1 (1:2:4) as in kerb stone set in CM 1:4 incl necessary moulds / forms work etc complete all as specified and directed.
M&L in repairs marble work (Udaipur green slabs) not less than 16 mm thick (table rubbed and polished) as in cooking platforms and like in cement mortar (1:4) in pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including rounding the edges complete all as specified and directed.
Material and labour 75mm thick, cement concrete 1:3:6, type C2 using 40mm graded crushed stone aggregate as in floors, plinth protection, paths, etc and finishing top surfaces even and smooth without using extra cement complete all as specified and directed.
Supply and fixing in repair bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule for 15mm bore dia of pipe complete all as specified and as directed .
Supply and fixing in repair 15mm bore pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.
S&F in repair stop valve for 15 mm bore dia of pipe, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for brass ferrule complete all as specified and directed .
Supply and fixing in repair 15 mm bore fancy type chromium plated stop valve cast copper alloy, with long shank & cup (concealed type) with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed .
S & F in repair PVC connections 15 mm bore, 450 mm length, heavy duty, with PTMT nuts complete all as specified and as directed.
Supply and fixing in repair brass chromium plated shower rose 125 mm size, with swivel joints, including fixing to steel pipe or union, complete all as specified and as directed.
S & F in repairs sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x460mm bowl size 410mm x330mm x160mm including 40mm dia waste fittings,brass,chromium plated with long screwed and fly- nuts,flange end bedded in red lead cement and other end fixed complete all as specified and directed .
S&F stainless steel plate racks of size 900mm x 600mm x 250mm and thickness of SS strip of 1mm fixed on wall etc complete all as specified & directed.
M&L for 25mm dia fancy type PVC coated in wooden finish on MS pipe coloured curtain rod with brackets and knobs at both ends with 6No rings in 1meter length as per site requirement including taking down old existing PVC conduit pipes with accessories complete all as specified and directed. Note:- The cost of brackets and knobs is deemed to be including in the quoted rate. Nothing extra shall be paid on this account.
Taking down or up 15 mm bore galvanised iron tubing/PL-AL-PE pipes and connection including cleaning for refixing or removal complete all as specified and directed.
Taking down or up 20 mm bore galvanised iron tubing /PE-AL-PE pipes and connection including cleaning for refixing or removal complete all as specified and directed.
Supply and fixing 15mm bore GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, complete all as specified and directed .
Supply and fixing 20mm bore GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, complete all as specified and directed .
Taking down AC eaves gutters and rainwater pipes (any size and pattern), including all fittings, heads, shoes, bends, swan-necks, etc complete all as specified and as directed.
Supply and fixing 110 mm bore PVC (SWR) pipe single socketed in any length with rubber ring joint fixed to walls with MS clamps complete all as specified and directed.
S & F 110 mm bore, PVC (SWR) fittings such as bends, tee, shoe etc; fixed to PVC pipes, complete all as specified and directed.
S&F in repair vitreous china (white) squatting pan 'Orissa' pattern, white, size 580 x 440x260 mm, with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flush pipe, anti-syphonic pipe etc including making good to floor and including trap set, in and including lime concrete complete all as specified and as directed.
Supply and fix in repairs vitreous china wash down water closet pan (pedestal pattern), white, including plastic seat cover closed pattern including bolts, flush pipe of polyethylene of low or high density PVC 32mm dia anti-syphonage pipe etc and connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe etc complete all as specified and as directed.
S&F in repairs PVC valveless, syphonic action type, flushing cistern, 10 litres capacity, low level, white, with inlet, ball valve, float and handle including brackets including 32 mm dia flush pipe of polyethylene of low or high density of PVC complete all as specified and directed.
Supply and fixing in repair Vitreous china wash hand basin, white, flat back, fancy type, size 550 x 400 mm including cast iron cartilever bracket 32 mm dia brass waste coupling and including PVC waste pipe of 32mm dia, fixing of waste fitting and union complete all as specified and as directed .
Dismantling and disconnecting of existing CI soil vent pipe 100 mm bore fixed to wall,laid in trenches incl all fittings & accessories complete all as specified and directed.
Dismantling and disconnecting of existing CI soil vent pipe 75 mm bore fixed to wall,laid in trenches incl all fittings & accessories complete all as specified and directed.
S & F cast iron sand soil waste and vent pipe 100mm bore with or without ears fixed with chemical cement joints fixed in walls complete all as specified and directed.
S & F cast iron sand soil waste and vent pipe 75mm bore with or without ears fixed with chemical cement joints fixed in walls complete all as specified and directed.
S & F 100mm bore bends (any radius),diminishing pieces or tapers (larger bore measured) with heel rest including oval access door complete all as specified and directed.
S & F 75mm bore bends (any radius),diminishing pieces or tapers (larger bore measured) with heel rest including oval access door complete all as specified and directed.
S & F in repair 100mm bore branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches including jointing to waste pipe fixed in sement concrete 1:2:4 type B 1with oval access door bore complete all as specified and directed
Supply and fixing in repair cast iron floor trap, 75mm dia with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate including CP gratting of suitable size complete all as specified and directed.
Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specied and directed.
Material and labour for 15mm thick rendering in CM (1:4) on fair faces of brick work or concrete surfaces and finishing even & smooth but without using extra cement & with using integral water proofing compound complete all as specified and directed.
Supply only of Liquid water proofing compound of approved make complete all as specified and directed.
Material and labour for rendering 15 mm thick in cement mortar in (1:6) on other then fair faces of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement complete all as specified and directed.
Material and labour for rendering 5 mm thick in cement mortar in (1:3) on ceiling and finishing the surface even & smooth without using extra cement complete all as specified and directed.
M & L for preparation of new plastered surafaces of walls and applying two coats of oil bound distemper over a coat of suitable primer complete all as per manufacturer instructions complete all as specified and directed.
Material and labour for applying three coats of white wash on newly plastered or unplastered ceiling surfaces including preperation of surfaces, complete all as specified and directed.
Material and labour for applying two coats of cement base paint over a coat of primer on newly plastered wall surfaces including cornices & pillasters etc as per manufacturer's specifications & instructions including preparation of surface, complete all as specified and as directed.
Preparation of old plastered or unplastered old decorated surfaces of ceiling by brooming for down or steel wire brushing, scrapping down make spots, trating oily/greasy spots, mass and efflorescence and applying one coat of white wash on ceiling including cornices etc complete all as specified and directed.
Preparation of old (Previously treated) plastered or unplastered surfaces of walls by washing, rubbing down and stopping of distempered or painted surfaces of walls and applying one coat of Oil Bound distemper white or tinted on walls incl 3mm one coat of wall care putty complete all as specified and directed.
M&L for preparation of old plaster surfaces of wall by brooming down or steel wire brushing or by using mechanical sander and applying two coat of Oil Bound distemper on walls by using roller / spray machine complete all as specified and directed.
M&L for preparation old previously treated surface of steel and iton work any description over 10 cm width or girth and applying one coat of synthetic enamal paint on old steel surfaces, complete all as specified and directed.
M&L for preparing old previously treated surface of wood and wood based surfaces exceeding 10 cm in width or girth and applying one coat of synthetic enamal paint on old decorated wooden surfaces, complete all as specified and directed.
Preparation of old plastered or unplastered old decorated surfaces of walls by brooming down or steel wire brushing, scrapping down smake soot, moulds, mass and efflorescent salts and trading oil and greasy spouts and applying one coat of weather proof exterior emultion on walls including cornices etc complete all as specified and directed.
Demolition of brick work or stone / boulder masonary, built in cement mortar including all quoins, arches, pillars etc., complete all as specified and directed.
M&L brick work with sub class 'B' old size bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 but except bricks (old serviceable bricks to be used) complete all as specified and directed. Note : The rate includes for cleaning of old bricks.
Disconnecting existing tanks of capacity in liters exc 250 & n exc 500 setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately).
Cleaning of water tanks exceeding 250 ltr and not exceeding 500 ltr capacity including removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. complete all as specified and directed
Dismantling / taking down 15 mm dia bib cock/ stop cock/angle cock of any pattern or of any type and re-fixing the same after minor repairs such as replacement of washers etc or re-fixing old serviceable bib cocks/ stop cocks any pattern complete all as specified and directed (any major parts such as jumpers brass/ spindles/ caps etc to be measured as supply only and paid for accordingly)
Supply only Jumper brass with rubber or leather washer complete for 15 mm dia bib cock / stop cock brass complete all as specified and directed
Supply only spindle brass for 15 mm dia CP Bib cock/ pillar cock/ concealed cock of any pattern complete all as specified and directed.
Supply only capstan head / cap of CP bib tap / CP stop cock 15 mm size complete all as specified and directed.
Supply and fixing in repairs bib cock PTMT standard 15 mm dia of any colour high pressure screwed for iron pipe & fixed ( male or female as required) complete all as specified and directed.
S&F in repair PVC Knob/Handle (as per sample) for 10 ltr capacity PVC low level flushing cistern complete all as specified and directed.
S&F in repair PVC Syphon Kit (as per sample) for 10 ltr capacity PVC low level flushing cistern complete all as specified and directed.
S&F in repair complete Veta washer set (as per sample) for 10 ltr capacity PVC low level flushing cistern complete all as directed.
Fixing only in repair low level flushing cistern any capacity after carrying out minor repairs such as stopping of leakage etc. complete all as specified and directed.
S&F in repairs tank nipple of suitable size at required on ground all as specified and directed.
Demolition of Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed.
M&L rendering 15 mm thick wall plaster in CM 1:3 mixed with water proofing compound complete all as specified and directed.
Supply only Integral water proofing compound. etc, complete all as specified and as directed.
M&L for applying two coats of Dr Fixit pidecrete URP in sunken floor portion of toilets & bathroom, chajja, staircase. etc by using URP + cement in the proportion of (1:1.5) and making pedicrete solution and applying by brush. Etc complete all as specified and directed.
M&L for PCC 1:5:10, type E-2 as in filling of sunken floors etc complete all as specified and directed.
S & F in replacement sub main two single core PVC copper conductor unsheathed wire multi stranded 6 sqmm alongwith earth wire 6.0 sqmm copper conductor single core wire connected by common earth in existing surface/ recessed PVC/ steel conduit and including all as specified . (note: Three lengths of 6 sqmm cable will be measured as one length). (Note: Two lengths of 6.0 sqmm cable and one length of 6.0 sqmm earth cable will be measured as one running length), etc complete all as specified and as directed.
S & F in replacement sheet metal encloser double door 8 way SPN 240 V ISI marked complete with neutral and earth link and bus bar complete made out of CRCA steel sheet Factory made including blanking plate for unused module complete all as specified and as directed.
All as per item serial No 111 here in before but 4 way TPN 415V etc, complete all as specified and as directed.
S & F in replacement single pole and neutral enclosure 240V with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and as directed.
S & F in repair MCB 6-32 AMP 240V SP 10 KA 'C' series etc complete all as specified and as directed.
S & F in repair MCB 20-32 AMP 240V SPN 10 KA 'C' series etc complete all as specified and as directed.
S & F in repair MCB 40-63 AMP 240V SPN 10 KA 'C' series etc complete all as specified and as directed.
M & L for earthing with galvanized steel plate electrode 600x600mmx6mm size dirctly burried in ground vertically to earth pit not less than 2.25 meter deep below normal ground level with top edge of the earth plate not less than 1.5m below normal ground level surrounded with coal dust and common salt filling in alternative layers of 15cm thick each connected to and including GI earth wire 4mm dia by means of nuts, bolts, check nuts and washers etc connecting to earthing test point, main switch board and including 15mm dia GI pipe light grade for protection of earth lead from earth plate to distribution board and 20mm dia GI pipe medium grade connected with funnel having wire mess for watering purpose including necessary excavation and earth work, PCC (1:2:4) type B-1 (using stone aggregates) for earthing pit, 10mm thick cast iron cover with angle iron frame all as specified and shown in electrical plate No 3 of SSR Part-I and testing on completion including replacement of old unserviceable.
S & F in repair switch piano, flush type single pole, one way 5 AMP etc, complete all as specified and as directed.
S & F in repair switch piano, flush type single pole, two way 5 AMP etc, complete all as specified and as directed.
S & F in repair switch piano, flush type single pole, one way 15 AMP etc, complete all as specified and as directed.
S & F in repair Bell push 5/6 AMPs 230V AC etc, complete all as specified and as directed.
S & F in repair Socket outlet 3 pin, 5A, flush type etc complete all as specified and as directed.
S & F in repair Socket outlet 2 in 1, 3 pin, 5 and 15 AMP flush type etc complete all as specified and as directed.
S & F in repair Stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc as required etc complete all as specified and as directed.
S & F in repair Call Bell AC 230V single pole etc complete all as specified and as directed.
S & F in repair Lamp holder PVC/ polycarbonate type with back plate etc complete all as specified and as directed.
S & F in repair wall mounted extruded Aluminium/ polycarbonate LED batten fixture T8(G 13 holder) 1.2m, suitable for T8 retrofit tube complete including making connection etc complete all as specified and as directed.
S & F in repair retrofit LED tubelight 20(+10%) watt, 1.2m, T8 6500K, effecacy not less than 90 lumen/ watt, extruded Aluminium/polucarbonate, PC diffusor and inbuilt driver etc complete all as specified and as directed.
S & F LED street light fitting 35 Watt 230V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrossion resistant complete with IP 65/66 protection including fixing with GI/MS bracket made out of suitable size of light grade tube upto 1.2mtr length bent to shape with 02 sets of MS clamps made out of minimum 3mm MS flat iron with suitable bolt and nuts complete with making connection etc complete all as specified and as dircted.
S & F in repair wall mounted LED batten fitting 10 ( + 10%) watt, 6500K, 0.6m, efficacy not less than 90 lumen/watt, extruded Aluminium/polycarbonate, PC diffusor and inbuilt driver complete including making connection etc complete all as specified and as directed.
S & F LED 7W Lamp base B-22 etc, complete all as specified and as directed.
S & F in repair Hylam sheet cover 3mm thick of size 5"x5" complete with machine screw / washer with provision of switches, sockets, Fan regulators etc, complete all as specified and as directed.
S & F in repair Hylam sheet cover 3mm thick of size 8"x5" complete with machine screw/washer with provision of switches, sockets, fan regulators etc complete all as specified and as directed.
S & F in repair Hylam sheet cover 3mm thick of size 11"x5" complete with machine screw/washer with provision of switches, sockets, fan regulators etc complete all as specified and as directed.
S & F in repair MS Sunken box of size 4"x4" with approved depth and thickness complete with dolly including making good the disturb surfaces CM(1:3) to match the existing complete all as specified and as directed.
S & F in repair MS Sunken box of size 7"x4" with approved depth and thickness complete with dolly including making good the disturb surfaces CM(1:3) to match the existing complete all as specified and as directed.
S & F in repair MS Sunken box of size 10"x7" with approved depth and thickness complete with dolly including making good the disturb surfaces CM(1:3) to match the existing complete all as specified and as directed.
Note:- Net contract sum shall be calculated after deduction of Sch of credit.
M/S BHAGWATI CONSTRUCTION COMPANY
M/s Manav Builders
Aman Enterprises
M/s GURFATEH BUILDERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .