CA NO CWE/PM/SP-18/2020-21 SPECIAL REPAIRS TO CERTAIN OMQ (QTY 08) IN SPE AREA AT SUBROTO PARK UNDER GE (AF) SUBROTO PARK DELHI CANTT-10

Amount

BOQ PART-I (B/R WORKS)

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete, all as specified and directed by Engineer-in-Charge.

M&L for vitrified ceramic light shade tiles 9 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match flooring( in any pattern) and jointed with coloured cement matching with surfaces of tiles as in floor 15 mm thick screed bed in cement mortar (1:4) and pointed with coloured cement matching with surfaces of tiles as in floor complete, all as specified and directed by Engineer-in-Charge.

All as per item No 1.02 here-in-before but as in skirting including 10mm thick backing coat in cement mortar (1:4).

S&F non skid coloured ceramic tiles area of each tiles exceeding 0.06 sqm but not exceeding 0.11 Sqm and 7mm thick as in floor set & jointed in neat cement slurry & pointed in coloured cement to match over 15mm thick screed bed in cement mortar (1:4) complete, all as specified and directed by Engineer-in-Charge.

M&L for glazed ceramic coloured tiles in vertical surface 300x450X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick screed bed in cement mortar 1:4 and pointed in white or coloured cement to match the shade complete, all as specified and directed by Engineer-in-Charge.

S&F non skid coloured ceramic tiles area of each tiles exceeding 0.11Sqm but not exceeding 0.18 Sqm and 7mm thick as in floor set & jointed in neat cement slurry & pointed in coloured cement to match over 15mm thick screed bed in cement mortar (1:4) complete, all as specified and directed by Engineer-in-Charge.

All as per item No 1.06 here-in-before but as in skirting including 10mm thick backing coat in cement mortar (1:4) complete, all as specified and directed by Engineer-in-Charge.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded in any mortar complete, all as specified and directed by Engineer-in-Charge.

M& L for polished Kota stone slab 20 (+/- 2 mm) thick as in steps tread in one piece/landing of stair case, size as required on site laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, and polishing complete including 15mm thick screed bed in cement mortar (1:6) complete, all as specified and directed by Engineer-in-Charge.

All as per item No 1.09 here-in-before but as in steps riser over 10mm thick screed bed in cement mortar (1:4) complete, all as specified and directed by Engineer-in-Charge.

S&F as in repairs, Vitreous China Wash Basin white flat back of size 630mmx450mm including brackets and waste pipe complete, all as specified and directed by Engineer-in-Charge.

S&F as in repairs, single lever wash basin mixer with popup waste system and 450 mm long braided hoses chromium plated complete, all as specified and directed by Engineer-in-Charge.

S&F as in repairs, CP waste coupling 32mm size half threaded with 130mm height complete, all as specified and directed by Engineer-in-Charge.

S&F as in repairs, 15 mm bore stop valve chromium plated with wall flange and fancy type with high pressure screwed down with CP flange complete, all as specified and directed by Engineer-in-Charge.

S&F as in repairs, PVC bathroom mirror cabinet of size 450mmx600mm complete, all as specified and as directed by Engineer-in-Charge. Make : Prayag or its equivalent

S&F as in repairs, wall mounted EWC with concealed flushing system and cover (Colour and size as approved by Engineer-in-Charge) complete, all as specified and directed by Engineer- in Charge. Make : CERA/SOMANY/HINDUSTAN or euivalent.

S&F as in repairs,10 Iitres capacity PVC flushing cistern white with inlet ball valve, float and handle including bracket and polyethylene of low or high density or PVC 32 mm dia for low level cistern complete, all as specified and directed by Engineer-in-Charge.

S&F as in repairs, hand shower (health faucet) with 1.0 m long easy flex tube in chrome finish and wall hook, complete all as specified and as directed by Engineer-in-Charge. Make : Jaquar (ALD-565) or equivalent make of MARC/GEM/PARKO.

S & F in repairs, CP paper holder complete, all as specified and directed by Engineer-in-Charge. Make - AHS-1553 of jaquar or equivalent make of MARC/GEM/PARKO.

S&F as in repairs, jet spray with necessary fixing arrangement complete, all as specified and as directed by Engineer-in-Charge. Make - MARC/GEM/PARKO.

S&F CP towel ring complete, all as specified and directed by Engineer-in-Charge. Make -AQN-7721 of Jaquar or equivalent make of MARK/GEM.

S&F as in repairs, bib tap cast copper alloy fancy type chromium plated with crutch or butterfly handle screwed down for 15mm bore pipe complete, all as specified and directed by Engineer-in-Charge. Make -CON -037KN of Jaquar or equivalent make of MARKC/GEM.

S&F as in repairs, CP soap dish of complete, all as specified and directed by Engineer-in-Charge. Make-AQN-7731 of Jaquar or equivalent make of MARC/GEM.

S&F as in repairs, corner glass shelf with bracket complete, all as specified and directed by Engineer-in-Charge. Make-ACN-1173 of Jaquar or equivalent make of MARC/GEM.

S&F as in repairs, 15mm bore chromium plated shower rose complete, all as specified and directed by Engineer-in-Charge.

S&F as in repairs, 15mm dia Brass CP wall mixer with provision for over head shower with 115 mm long bend pipe on upper side, conecting legs & wall flanges for mixing hot & cold water screwed down for iron pipe complete, all as specified and directed by Engineer-in-Charge. Make : FUS 29273UPR of Jaquar or equivalent make of MARC/GEM.

S&F as in repairs, brass powder coated cloth hanging hooks (set of six hooks) complete, all as specified and directed by Engineer-in-Charge.

S&F as in repairs, 15mm bore two way angle valve chromium plated with wall flange and fancy type high pressure screwed down with CP flange complete, all as specified and directed by Engineer-in-Charge.

S&F sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete, all as specified and directed by Engineer-in-Charge.

S & F as in repairs, CP towel racks 60 cm long with lower hanger complete, all as specified and directed by Engineer-in-Charge. Make AKP-35781PS of Jaquar or equivalent make of MARC/GEM.

S&F as in repairs, PTMT grating round of 100mm dia (Minimum wt 25gms) complete, all as specified and directed by Engineer-in-Charge.

S&F as in repairs, PTMT grating of 150mm size with waste hole (Minimum wt 100 gms) complete, all as specified and directed by Engineer-in-Charge.

S&F as in repairs, PVC connections 15mm size with PTMT nuts of length 450mm long complete, all as specified and directed by Engineer-in-Charge.

S&F as in repairs, PVC connections 15mm size with PTMT nuts of length 600mm long complete, all as specified and directed by Engineer-in-Charge.

Taking down steel tubing and connections 20mm bore complete, all as specified and directed by Engineer-in-Charge.

All as per item No 1.36 here-in-before but 15mm bore .

S&F 20mm bore tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete, all as specified and directed by Engineer-in-Charge.

All as per item No 1.38 here-in-before but 15mm bore .

M&L for complete removal of existing treatment of surfaces by steel wire brushing, scraping down smoke soots, moulds, moss and efflorescent salts etc on wall and applying two coats of oil emulsion distemper over a coat of primer including two coats of wall care putty to achieve smooth surface on wall complete, all as specified and directed by Engineer-in-Charge.

Taking down cement or cement lime plaster on brick walls including racking out joints hacking for key scrubbing down with water etc complete, all as specified and directed by Engineer-in-Charge.

M&L rendering 15mm thick in cement mortar (1:6) on other than fair faces of brick work or concrete surfaces of walls, finished even and smooth (without using extra cement) complete, all as specified and directed by Engineer-in-Charge.

M&L for rendering 15 mm thick in two layers i.e. 10mm in cement mortar (1:6) & 5 mm thick in cement mortar (1:4) mixed with approved WPC as per manufacturer instructions on fair faces of brick surfaces or concrete surfaces even and smooth without using extra cement complete, all as specified and directed by Engineer-in-Charge.

M&L for rendering 10 mm thick in cement mortar (1:4) on concrete surfaces of ceiling, even and smooth without using extra cement complete, all as specified and directed by Engineer-in-Charge.

M&L for preparation of new plastered surfaces of walls, and applying two coats of distemper oil emulsion over a coat of primer including two coats of elastomeric wall care putty to achieve smooth surface on walls complete, all as specified and directed by Engineer-in-Charge.

M&L for preparation of new plastered surfaces of walls, and applying three coats of white wash on walls complete, all as specified and directed by Engineer-in-Charge.

M&L for preparation of new plastered surfaces of walls, and applying two coats of cement based paint over a coat of primer complete, all as specified and directed by Engineer-in-Charge.

M&L preparation of new plastered or unplastered surface and applying three coats of white wash on ceiling complete, all as specified and directed by Engineer-in-Charge.

Taking down chowkats or frames n.exc 1.50 Sqm each with shutters (without taking off shutters from the frames) and remove to store complete, all as specified and directed by Engineer-in-Charge.

All as per item No 1.49 here-in-before but exc 1.5 Sqm and n.exc 4.00 Sqm each

S&F solid moulded PVC door frame of size 50mmx47mm made out of 5mm prelam PVC sheet made out of 5mm wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet PVC sheet reinforced with M.S. square tube, suppling & fixing in opening as per specification complete, all as specified and directed by Engineer-in-Charge.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain moulded PVC sheet polyurethane painted on the front face & 2mm prelam PVC sheet on back face with wood free EPS complete, all as specified and directed by Engineer-in-Charge.

S&F aluminium frame powder coated any colour (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete, all as specified and directed by Engineer-in-Charge.

S&F aluminium powder coated any colour (minimum thickness of powder coating 50 micron) as in window and ventilator shutters, sliding type three track, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete, all as specified and directed by Engineer-in-Charge.

S&F aluminium powder coated any colour (minimum thickness of powder coating 50 micron) window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.). hinges type B-21 100mm long (2 No.) suitable handle (1 No.) complete, all as specified and directed by Engineer-in-Charge.

S&F as in repairs, aluminium deco grills conforming to DG-104 grade complete, all as specified and directed by Engineer-in-Charge.

S&F in repairs for 18mm thick celuka PVC ply for shelf/partition/drawers etc.The front side of the edge visible in the front of the shelf/partition to be edge lipped by 18mm width x 1mm thick PVC sheet of density 600 kg/cbm density manufactured by an ISO-9000 certified company, using solvent cement etc , complete, all as specified and directed by Engineer-in-Charge. Make : Rajshree or equivalent

S&F telescopic GI powder coated drawer channel 450mm long with ball bearing complete, all as specified and directed by Engineer-in-Charge.

M&L as in repairs, 50mm dia polished cup board knob with nut, screw and washer of brass complete, all as specified and directed by Engineer-in-Charge.

Supply only liquid water proofing compound complete,all as specified and directed by Engineer-in-charge

Demolition of PCC of any description and in any position not otherwise specifically provided and M&L PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in roof kerbs, benching rounded or chamfered on edge including rounded or chamfered edges with necessary form work etc complete,all as specified and directed by Engineer-in-Charge.

Demolition and breaking of any dia drain pipes including fittings (salt glazed ware, AC,PVC or reinforcement concrete) set in cement mortar etc complete,all as specified and directed by Engineer-in-Charge.

S&F PVC (SWR) 110 mm dia bore pipe single socketed, in any length with rubber ring joints fixed to walls, including necessary PVC clamps for fixing of pipes etc complete,all as specified and directed by Engineer-in-Charge.

All as per item No 1.64 here-in-before but 75mm dia bore pipe single socketed.

S&F 110 mm dia bore PVC (SWR) bends complete , all as specified and directed by Engineer-in-Charge.

All as per item No.1.66 here-in-before but 75mm dia

S&F PVC (SWR) vent cowl 110mm complete, all as specified and directed by Engineer-in-Charge.

S&F PVC (SWR) 75 mm dia floor trap complete, all as specified and directed by Engineer-in-Charge.

S&F 75 mm dia PVC junction single T complete, all as specified and directed by Engineer-in-Charge.

S&F 110 mm dia PVC junction single T complete, all as specified and directed by Engineer-in-Charge.

Taking down shutter of any description exc 1 sqm and n.exc 2 sqm complete, all as specified and directed by Engineer-in-Charge.

S&F 35 thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides as in cup board shutter complete, all as specified and directed by Engineer-in-Charge.

S&F 35 mm thick 2nd class hard wood glazed and skelton shutter (minimum 08 Panels) open rebated and prepared to receive glass or gauge etc. divided into squares with plain chamfered or rounded metered beads complete, all as specified and directed by Engineer-in-Charge.

M&L 100 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C - 21 complete, all as specified and directed by Engineer-in-Charge.

M&L 150 mm size Aluminium anodised, barrel tower bolts of extruded section and fixed complete, all as specified and directed by Engineer-in-Charge.

M&L 150 mm long Aluminium handles, cast type, anodised complete, all as specified and directed by Engineer-in-Charge.

M&L for preparation of surface and applying three coat of white wash on ceiling complete, all as specified and directed by Engineer-in-Charge.

M&L two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces of any description not otherwise described over 10 cm width or girth including preparation of surfaces complete, all as specified and directed by Engineer-in-Charge.

S&F 250 mm long aluminium alloy sliding door bolt with hasp and staple complete, all as specified and directed by Engineer-in-Charge.

M&L 75mm thick PCC 1:3:6 type C1 (20mm graded stone aggregate) as in floor/ path/ Plinth protection including necessary form work, surfaces finished even and smooth without using extra cement including demolition of existing Plinth protection complete, all as specified and directed by Engineer-in-Charge.

S&F stainless steel wire cloth, 0.36 nominal dia of wire & average width of aperture 1.40mm with stainless steel wire staples complete, all as specified and directed by Engineer-in-Charge.

BOQ PART-II (E/M WORKS)

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc removing materials and keeping in safe custody for giving credit and making good disturbed surfaces of walls, floors etc complete, all as specified and directed by Engineer-in-Charge.

M&L for light/ceiling fan/exhaust fan point wiring with single core of FRLS PVC insulated unsheathed ISI marked 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm drawing through in and including FRLS, PVC conduit size of not less than 20mm including conduit fittings and acessories concealed in wall / ceiling or surface conduit wiring on ceiling /wall terminated in flush metal box alongwith outer cover plate for mounting modular switch, socket and electronic regulator along with provn of earth wire of PVC insulated, unseathed, 1100 V grade cable multi stranded FRLS ISI marked copper conductor of size 1.5 sqmm complete, all as specified and directed by Engineer-in-Charge. (a) One light point/ceiling fan/ Exhaust fan controlled by one modular switch one way.

All as per item No 2.02 here-in-before but for one 5 pin 5 Amps modular socket outlet on independent board.

All as per item No 2.02 here-in-before but for 3 pin 5 Amps socket outlet on the same board with other switches

All as per item No 2.02 here-in-before but for call bell controlled by one modular push button in independent board .

All as per item No 2.02 here-in-before but for one light point controlled by two way switches

All as per item No 2.02 here-in-before but with 2.5 Sqmm cable for independent board one 3 pin 15 Amps socket outlet including single core 2.5 Sqmm PVC insulated copper conductor unsheathed 1100 V grade IS : 694 FRLS cable for continuous earth wire connected to gang box of required size.

S&F modular Switch, 5/6 Amps , 1 module complete, all as specified and directed by Engineer-in-Charge.

S&F modular Switch, 5/6 Amps , 1 module,two way complete, all as specified and directed by Engineer-in-Charge.

S&F modular socket outlet , 6/16 Amp, 2/3 pin combined, 2 module complete, all as specified and directed by Engineer-in-Charge.

S&F modular Switch, 16 Amps , 1 module, complete all as specified and directed by Engineer-in-Charge. .

S&F modular socket outlet , 6/16 Amp, 2/3 pin combined, 2 module complete, all as specified and directed by Engineer-in-Charge. .

Supply only in replacement of bell push,Modular type, 5 Amps, 240 volts all as specified and directed at site complete, all as specified and directed by Engineer-in-Charge.

Supply only in replacement of electric calling Bell multy music type suitable for 230 volts complete, all as specified and directed by Engineer-in-Charge.

S&F modular white cover plate with frame 12 module complete, all as specified and directed by Engineer-in-Charge..

S&F flush mounting boxes 12 modular complete, all as specified and directed by Engineer-in-Charge.

S&F modular white cover plate with frame 8 module complete, all as specified and directed by Engineer-in-Charge.

S&F flush mounting boxes 8 modular complete, all as specified and directed by Engineer-in-Charge.

S&F modular white cover plate with frame 6 module complete, all as specified and directed by Engineer-in-Charge.

S&F metal flush mounting boxes 6 modular complete, all as specified and directed by Engineer-in-Charge.

S&F modular white cover plate with frame 4 module complete, all as specified and directed by Engineer-in-Charge.

S&F metal flush mounting boxes 4 modular complete, all as specified and directed by Engineer-in-Charge.

S&F modular white cover plate with frame 3 module complete, all as specified and directed by Engineer-in-Charge.

S&F metal flush mounting boxes 3 modular complete, all as specified and directed by Engineer-in-Charge.

S&F modular white cover plate with frame 1 module complete, all as specified and directed by Engineer-in-Charge.

S&F metal flush mounting boxes 1/2 modular complete, all as specified and directed by Engineer-in-Charge.

S&F in replacement of modular fan regulator ,120 W, 2 module complete, all as specified and directed by Engineer-in-Charge.

M/L for Sub main wiring with under mantioned runs of single core PVC insulated but unsheathed FRLS cable of specified size with multistranded copper conductors 1100 volt grade IS- 694 marked drawn through and including non metalic PVC conduit pipe medium grade ISI marked (not less than 20 mm dia)along with fittings and accessories all fixed concealed on wall and surface on ceiling and also including the specified runs of specified size earth continuity conductor of similar type of cable complete all as specified and directed by Engineer- in- Charge. (2 runs of main cable one run of earth wire one run of PVC pipe will be measured as an one run) (a) 2 Run of 4 Sqmm cable and one run of 4 sqmm cable dolly earth continuity.

(b) 4 Run of 10 Sqmm cable and one run of 10 sqmm cable.

Taking down carefully copper/aluminium surface/ conduit sub main wiring from Main DB to sub DB and keeping in safe custody for giving credit and making good disturbed surfaces or walls , floors , etc complete, all as specified and directed by Engineer-In-Charge. (a) 2 Run of 4 Sqmm cable and one run of 2.5 sqmm cable.

(b) 2 Run of 10 Sqmm cable and one run of 10 sqmm cable.

Taking down of tube light fittings/ ceiling fittings/wall fittings/ holder fittings of any type and make and removing materials to store for keeping in safe costudy or for reuse or taking credit and making good disturbed surface of walls, floors etc. complete, all as specified and directed by Engineer-in-Charge.

S & F Surface mounting LED slim round down lighter made of PDC with high efficient LED & Glare free opal diffuser IP20, 18 watt, 40000 K complete, all as specified and directed by Engineer-in-Charge. Make :- Havells Cat Part No - ENDURANEOHSURFACEDLS18WLED857S or its equivalent in Phillips/Wipro.

S&F indoor decorative wall mounted LED batten extruded aluminium heat shrink provided for efficient heat dissipation and integrated electronic driver 20 watt, 4', LED fitting, 230 Volts, diffused optics ,etc complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, fixed on two PVC round blocks and testing complete, all as specified and directed by Engineer-in-Charge. Make :- Havells Cat Part No - LUMILINEPLUSBS20WLED865SPCSS or its equivalent in Phillips/Wipro.

S&F indoor decorative LED wall bracket light Aesthetically designed wall bracket light with B22d & E27 lamp holder, LED fitting, 230 Volts, diffused optics ,etc complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, fixed on two PVC round blocks and testing complete, all as specified and directed by Engineer-in-Charge. Make: HALONIX Cat Part No - HLWB-01-B22 & HLWB-01-E27 or its Equivalent in Havells/Phillips/Wipro.

S&F indoor decorative wall mounted LED batten extruded aluminium heat shrink provided for efficient heat dissipation and integrated electronic driver 10 watt, 2', LED fitting, 230 Volts, diffused optics ,etc complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, fixed on two PVC round blocks and testing complete, all as specified and directed by Engineer-in-Charge. Make: Havells Cat Part No - LUMILINEPLUSBS10WLED865SPCSS or its Equivalent in Phillips/Wipro.

S&F wall mounted LED bulk head fittings, 10 watt, warm white,, 230 Volts, diffused optics ,etc complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, and testing complete, all as specified and directed by the Engineer-In- Charge. Make: Havells Cat Part No- HEXAFT10WLED857SSYMBOPC or its Equivalent in Phillips/Wipro.

S&F in replacement of ceiling rose polycarbonate, isolated body 65 X 50 mm 2 to 3 terminal complete, all as specified and directed by Engineer-in-Charge.

S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 240 volt MCB 20 Amps complete, all as specified and directed by Engineer-in-Charge.

Taking down unserviceable single pole and neutral enclosure with two pin and earth plug after disconnecting the electric supply complete, all as specified and directed by the Engineer-in-Charge.

Taking down ceiling fan of any size/sweep and keeping in safe custody for deposite to MES yard, complete all as specified and as directed by the Engineer-in-Charge.

Hanging only celing fan after servicing greasing and painting received from item No. 2.41 above and connecting up including provision of suitable size of copper cable from connector of fans to ceiling rose complete, all as specified and as directed by the Engineer-in-Charge.

S&F ceiling fans 1200 mm sweep , ES 5 star rating, 230 volt SP, with all acessories including provision of MS hooks suitable for hanging ceiling fans and suitable size and length of copper wire and down rod complete, all as specified and directed by the Engineer-in-Charge.

Taking down carefully Exhaust fan of any size/sweep and ceiling rose etc complete, all as specified and directed by Engineer-in-Charge.

S&F fresh air fan 300/380 mm sweep , PVC Body heavy duty , 230 volt, with all acessories including provision of suitable cutting making hole for suitable size and length of copper wire and ceiling rose complete ,all as specified and directed by the Engineer-in-Charge.

Taking down old unserviceable MCB DB including MCBs of any size complete, all as specified and directed by Engineer-in-Charge.

S&F MCB distribution board with Bus bar 200A neutral link , earth bar made out of CRCA mild steel sheet surface mounting TPN 4 way 230 volts double door type regal gray horizontal type complete, all as specified and as directed by Engineer-in-Charge. Make - Havells or equivalent to Standard/ Legrand. Note :- MCB shall be measured and paid seperately.

S&F in replacement of MCBs 10 KA breaking capacity, single pole, 240 volts, 6 to 32 Amps C Curve capacity complete, all as specified and directed by Engineer-in-Charge. Make - Havells or equivalent to Standard/ Legrand.

S&F in replacement of MCBs16 KA breaking capacity. TP, 440 volts, 63 Amps C Curve capacity complete, all as specified and directed by Engineer-in-Charge. Make - Havells or equivalent to Standard/ Legrand.

J D ENTERPRISES

M/S MG GROUP

M/s. Kansal Construction Co.

Hindustan Co.Co

ASHUTOSH BUILDERS

shiva enterprises