8865 REPAIRS TO COMPOUND WALL, FENCING, GATES AND DRAINS, HARDSTANDING, FOOTPATH ETC IN VARIOUS MD / OTM ACCN UNDER AGE BR I SOUTH PUNE

Amount

Dismantling of old RCC fencing post any section including taking out embeded portion and making good disturbed ground complete all as specified and as directed.

Dismantling fencing wire mesh and barbed wire any type etc complete all as specified and as directed.

Excavation in post holes each n. exc 0.50 cum getting out in soft/hard soil incl returning filling and removing surplus soil to aq distance n.exc 150m making good surface complete all as specified and as directed.

S&F MS angle iron posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, bolting etc and similar works confirming to Fe-290 Gde E-165 complete all as specified and as directed.

Supply only chain link MS galvanised fencing, any size or type all as directed by Engr-in-Charge

S&F galvanised 2 strand steel barbed wire 2.24mm, dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provn of galvanised mild steel wire staples or steel pins all as directed. (Note : Each line wire to be measured)

Dismantling of structural steel work including door gates framed truss etc. complete all as specified and as directed.

M&L for MS structural steel work, framed as in trusses, purlins, rafter etc. conforming to grade E-250 (Fe-410W, quality A) including shaped washers including necessary cutting required length, notching drilling, riveting and or welding or connecting with nut bolts with angle cleats, fish plate, gusset plate and also erecting in true position complete all as specified and as directed.

M & L for preparation of new steel surface & applying two coats of synthetic enamel to steel surface of any description over 10 cm in width or girth not otherwise described over a coat of red oxide primer complete all as specified and as directed.

Dismantling of AC sheet corrugated, or semi corrugated in roof covering complete all as specified and as directed.

S & F roof sheeting prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Taking down cement plaster on brick/ block walling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

Demolition of brick/precast block walling built in cement mortar complete all as specified and as directed.

Demolition of cement concrete in ground floors and paving not exc 15cm thick (below or above ground level) un-reinforced complete all as specified and as directed.

M & L for solid block masonary exc. 10 cm width blocks of PCC design mix Gde C-5 set in CM (1:6) complete all as specified & directed by Engr-in-Charge.

M & L for solid block masonry in PCC 1:3:6 , type C2, and built in cement mortar 1:6, 100mm thick complete all as specified and as directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundations filling and mass concrete complete all as specified and as directed.

M&L for 75mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base / flooring complete all as specified and as directed.

M&L for PCC 1:3:6 type C-2, (using 40mm graded stone aggregate), 75mm thick, laid in alternate bays including finishing the surfaces even and smooth using extra cement complete all as specified and as directed.

M&L for Plain cement concrete 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in surface channels and drains (including necessary form work) complete all as specified and directed.

M & L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc. complete all as specified and as directed.

M & L for providing precast cement concrete 1:2:4 type B-1 (Using 20mm graded aggregate) in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM 1:4 (Including necessary form work) complete all as specified and as directed.

M&L for mild steel bars 6mm to 8mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) nor less than 0.9mm dia or securing with clips quality conforming to FE-410-W (Gde E-250 quality-A or Fe 290(Fde-E-165) complete all as specified and as directed.

Providing, cement concrete, Type B-1, 1:2:4 using (20mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and as directed.

Excavation in trenches not exc 1.5m wide and not exc 1.5m in depth foundation and getting out in any type of soil ,complete all as specified and directed.

Removing surplus excavated soil to a distance not exc. 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and as directed.

M&L for coloured precast cement concrete interlocking tiles 60mm thick, of any shape and size, conforming to IS-15658-2006 glossy finish as in floor/pavement laid on 50mm thick stone dust cushioning, laid dry to the profile over hard concrete sub base or rammed earth/murrum filling all as directed by Engr-in-Charge

M&L for precast coloured, chequered cement concrete tiles, glossy finish of size 305 x 305mm x 25mm thick, conforming to IS-1237 (2006) set jointed and pointed in neat cement slurry in floor laid over and including 20mm thick screed bed in CM (1:6).

Filletting in any position and to any shape in cement mortar 1:4, section of fillet not exc 25 Sq cm. complete all as specified and as directed.

M&L for RCC M-25(20mm graded aggregate)as in foundations, including rafts footings,bases for columns etc complete all as specified and as directed.

M&L for RCC M-25(20mm graded aggregate) in columns,pillars, piers, posts and struts complete all as specified and as directed.

M&L for form work to sides of concrete foundation, footings bases of columns, raft and raft beams, sides and soffit of foundfation and similar work; vertical or to batter complete all as specified and as directed.

M&L for form work to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and as directed.

M&L for 5mm thick Rendering on concrete surface in CM 1:3 finished even and smooth w/o using extra cement complete all as specified and as directed.

M&L for two coats of cement base paint over a coat of primer on newely plastered surface incl prepration of surface complete all as specified and as directed.

S&F mild steel TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending and binding with and incl mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

All as per item No. 37.00 above but 8mm dia as in strrups, spacer and binders complete all as specified and as directed.

Returning filling in including spreading levelling, watering and well ramming, in layers not exc. 25cm complete all as specified and as directed.

M & L for scrapping and removing old paint stains, loose material and algae-fungus growth then cleaning of surface with water using pressure washer machine then crack filling with acrylic based textured crack filler and an application of one coat of primero-primer cum sealing having alkali resistence property diluted with water and mixed with bio block in ratio 5:4:1 followed by application of two coat of modified acrylic apex exterior emulsion paint of approved shade having silicon additives in paint which give 5 years of performance warranty complete all as speciffied and directed. Note : (i) The workk should be done by Asian paints recommended applicator and the bidder should be able to furnish stage wise on site technical reports from the concerned company technologist. (ii) Rate quoted shall inclusive of carry out repair of plaster in CM 1:4 to match the existing thickness of surface including taking down plaster in patches not exc 1.00 sqm as directed. (iii) Rate quoted shall deemed to be inclusive of necessary scafolding / security measures as the work is to be carried out for elevated height up to 12 mtr height oh building.

Pruning of vegetation and plants growth on the external wall surfaces/roofs and applying Hydrochloric acid on the left over root portion and making good disturbed portion with CM 1:4 or PCC 1:2:4 grouting and finished with two coats of cement base paint to match the existing colour shade. complete all as specified and as directed. (Note : Rates to be inclusive of necessary scaffolding up to G+3 height.)

Rendering 15mm thick in cement mortar 1:4 on brick surfaces finished even smooth with spong finish complete all as specified and as directed.

Preparation of old decorated surfaces of wall by brooming down and scrapping wherever necessary and applying one coat of cement base paint all as specified and directed.

Preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer all as specified and directed.

M & L for Moorum / red bajri filling in floors or pavings laid in layers spread leveled & rammed including watering complete all as specified and as directed.

M & L for hardcore of broken stone or harden n.exc 63 cm gauage deposited, spread & well rammed including watering of a true surface in layers n.exc 15cm thick etc. complete all as specified and as directed.

S G Engineers

M/S Sandeep Enterprises

Parhar Enterprise