Establishment of Centre Lab of Excellence on Nutri - Cereals in Bundelkhand region at RLBCAU Jhansi UP.

1 4.1 Providing and laying in position cement concrete of specified grade excluding the cost

of centering and shuttering - All work up to plinth level :

4.1.5 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded

stone aggregate 20 mm nominal size derived from natural sources)

2 4.11 Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1

cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone Sqm 46.65 495.75 482.36 22,500.55

aggregate 20mm nominal size derived from natural sources).

Sl. No. DSR-2023 DESCRIPTION UNIT QTY. RATE AMOUNT

3 4.17 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse

sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed

of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with Sqm 93.29 749.30 729.07 68,016.79

fine sand, including necessary excavation, levelling & dressing & finishing the top

TOTAL (Carried Over to Summary of Civil Works) 0.00 3,45,223.40

D 5.00 REINFORCED CEMENT CONCRETE WORK 0.00

1 5.9 Centering and shuttering including strutting, propping etc. and removal of form for : 0.00

a 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete. Sqm 99.36 392.15 381.56 37,912.00

c 5.9.3 Suspended floors, roofs, landings, balconies and access platform. Sqm 1092.00 927.25 902.21 9,85,217.96

e 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers Sqm 494.55 736.40 716.52 3,54,353.58

f 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts. Sqm 801.00 961.30 935.34 7,49,211.26

g 5.9.7 Stairs, (excluding landings) except spiral-staircases. Sqm 20.00 764.95 744.30 14,885.93

j 5.9.16 Edges of slabs and breaks in floors and walls 0.00 0.00

2 5.11.1 Extra for additional height in centering, shuttering where ever required with adequate

bracing, propping etc., including cost of de-shuttering and decentering at all levels, over

a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be Sqm 241.64 384.30 373.92

measured). Suspended floors, roofs, landing, beams and balconies (Plan area to be

3 5.22 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in

position and binding all complete upto plinth level. 0.00

i 5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. Kg 24756.02 107.85 104.94 25,97,848.88

4 5.22A Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in

position and binding all complete above plinth level. 0.00

i 5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. Kg 37134.04 107.85 104.94 38,96,773.33

5 5.30 Add for plaster drip course / groove in plastered surface or moulding to R.C.C.

projections. 11,861.11

6 5.33.1 Providing and laying in position ready mixed or site batched design mix cement

concrete for reinforced cement concrete work; using coarse aggregate and fine

aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland

/Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to

accelerate / retard setting of concrete, to improve durability and workability without

impairing strength; including pumping of concrete to site of laying, curing, carriage for

all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as 0.00

per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra

cement up to 10% of the minimum specified cement content in design mix shall be

payable separately. In case the cement content in design mix is more than 110% of the

specified minimum cement content, the contractor shall have discretion to either re-

design the mix or bear the cost of extra cement.

a) 5.33.1 All works upto plinth level. 0.00 0.00

i 5.33.1.1 Concrete of M25 grade with minimum cement content of 330 kg /cum Cum 157.51 9504.75 9248.12 14,56,640.21

b) 5.33.2 All works above plinth level upto floor V level. 0.00 0.00

i 5.33.2.1 Concrete of M25 grade with minimum cement content of 330 kg /cum Cum 367.52 9860.40 9594.17 35,26,004.93

7 5.35 Add for using extra cement in the items of design mix over and above the specified

cement content therein. 56,205.88

TOTAL (Carried Over to Summary of Civil Works) 0.00 138,08,819.88

E 6.00 BRICK WORK 0.00

1 6.1 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5

in foundation and plinth in:

Sl. No. DSR-2023 DESCRIPTION UNIT QTY. RATE AMOUNT

6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 91.66 7132.25 6939.68 6,36,112.32

2 6.4 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5

in super structure above plinth level up to floor V level in all shapes ans sizes in: 0.00

6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 213.88 9105.95 8860.09 18,95,000.36

3 6.13 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class

designation 7.5 in superstructure above plinth level upto floor V level. 0.00

6.13.1 Cement mortar 1:3 (1 cement :3 coarse sand) Sqm 459.00 1150.50 1119.44 5,13,821.35

4 6.15 Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third

course of half brick masonry. 46,804.41

TOTAL (Carried Over to Summary of Civil Works) 0.00 30,91,738.45

Sl. No. DSR-2023 DESCRIPTION UNIT QTY. RATE AMOUNT

F 8.00 MARBLE & GRANITE WORK 0.00

1 8.2 Providing and fixing 18mm thick gang saw cut ( premoulded and prepolished) machine

cut for kitchen platforms, vanity counters, window sills , facias and similar locations of

required size of approved shade, colour and texture laid over 20mm thick base cement

mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with 0.00

matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing

to edge to give high gloss finish etc. complete at all levels.

b) 8.2.2 Granite of any colour and shade 0.00

2 8.3 Providing edge moulding to18 mm thick marble stone counters, Vanities etc.,including

machine polishing to edge to give high gloss finish etc. complete as per design 0.00

approved by Engineer-in-Charge.

3 8.4 Extra for fixing marble /granite stone, over and above corresponding basic item, in facia

and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning Metre 32.40 568.55 553.20

4 8.5 Extra for providing opening of required size & shape for wash basin / kitchen sink in

kitchen platform, vanity counter and similar location

inmarble/Granite/stonework,including necessary holes for pillar taps etc.including Each 12.00 978.70 952.28

moulding, rubbing and polishing of cut edges etc.complete. 11,427.30

5 8.10 Providing and fixing stone slab with table rubbed, edges rounded and polished, of

size75x50cm deepand 1.8cm thick, fixed in urinal partitions by cutting a chase of

appropriate width with chase cutter and embedd in gthe stone in the chase with epoxy

grout or with cement concrete 1:2:4 (1cement: 2coarsesand: 4 graded stone aggregate Sqm 19.20 4051.85 3942.45

6mm nominal size)as per direction of Engineer-in-charge and finished smooth.

Granite Stone of approved shade

6 8.31 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622

(thickness to be specified by the manufacturer), of approved make, in all colours,

shades except burgundy, bottle green, black of any size as approved by Engineer-in-

Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar Sqm 144.98 1267.95 1233.72

1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm,

including pointing in white cement mixed with pigment of matching shade complete.

TOTAL (Carried Over to Summary of Civil Works) 0.00 6,78,408.39

G 9.00 WOOD, WPC & uPVC WORK 0.00

1 9.53 Providing 40x5 mm flat iron hold fast 400 mm long including fixing to frame with 10 mm

diameter bolts, nuts and wooden plugs and embedding in cement concrete block

300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20 Each 12.00 228.85 222.67 2,672.05

mm nominal size)

2 9.82 Providing and fixing bright finished brass hanging type floor door stopper with

necessary screws, etc. complete. Each 20.00 121.65 118.37 2,367.31

3 9.84 Providing and fixing aluminium extruded section body tubular type universal hydraulic

door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight

upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed Each 20.00 983.15 956.60 19,132.10

adjustment with necessary accessories

and screws etc. complete.

4 9.96 Providing and fixing aluminium sliding door bolts, ISI marked anodised anodic coating

not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or 0.00 0.00

shade, with nuts and screws etc. complete :

Sl. No. DSR-2023 DESCRIPTION UNIT QTY. RATE AMOUNT

5 9.97 Providing and fixing aluminium tower bolts ISI marked anodised ( anodic coating not

less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade 0.00 0.00

with nuts and screws etc. complete-

6 9.100 Providing and fixing aluminium handles ISI marked anodised ( anodic coating not less

than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with 0.00 0.00

nuts and screws etc. complete-

7 9.101.2 Providing and fixing aluminium hanging floor door stopper, l5l marked, anodised

(anodic coatinS not less than grade AC 10 as per 15 : 1868) transparent or dyed to

required colour and shade, with necessary screws etc. complete. Twin rubber stopper

8 9.135 Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and

clerestory windows using wire gauge with average width of aperture 1.4 mm in both 0.00 0.00

directions with wire of dia. 0.50 mm all complete.

9.135.2 With 12 mm mild steel U beading Sqm 57.60 1228.00 1194.84 68,823.01

9 26.86 Providing and fixing factory made single extruded WPC (Wood Polymer Composite)

solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin

PVC polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural

fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity

index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement

and screwed with full body threaded star headed SS screws having minimum frame

density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge),

minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and

resistance to spread of flame of Class A category with property of being termite/borer 0.00 0.00

proof, water/moisture proof and fire retardant and fixed in position with M.S hold

fast/lugs/SS dash fasteners of required dia and length complete as per direction of

Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for

separately).Note: For WPC solid door/window frames, minus 5mm tolerance in

dimensions i.e depth and width of profile shall be acceptable. Variation in profile

dimensions on plus side shall be acceptable but no extra payment on this account shall

10 26.87 Providing and fixing factory made single extruded WPC (Wood Polymer Composite)

solid plain flush door shutter of required size comprising of virgin polymer of K value 58-

60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice

husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)

having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face)

& 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850

N/mm2 and resistance to spread of flame of Class A category with property of being

termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless

steel butt hinges of required size with necessary full body threaded star headed counter

sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt

hinges and necessary S.S screws shall be paid separately)

TOTAL (Carried Over to Summary of Civil Works) 0.00 5,21,387.19

H 10.00 STEEL WORK 0.00

1 10.16.1 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses

etc., including cutting, hoisting, fixing in position and applying a priming coat of

approved steel primer, including welding and bolted with special shaped washers etc.

Sl. No. DSR-2023 DESCRIPTION UNIT QTY. RATE AMOUNT

2 10.18 Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan

clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its

top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S.

sheet box by means of 3.3 mm dia round headed screws, one lock at the corners.

Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.

3 10.27 Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener

of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk

head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole 0.00 0.00

in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge.

4 10.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow

tubes, channels, plates etc., including welding, grinding, buffing, polishing

and making curvature (wherever required) and fitting the same with

necessary stainless steel nuts and bolts complete, i/c fixing the railing

with necessary accessories & stainless steel dash fasteners , stainless

steel bolts etc., of required size, on the top of the floor or the side of waist

slab with suitable arrangement as per approval of Engineer-in-charge,

(for payment purpose only weight of stainless steel members shall be

considered excluding fixing accessories such as nuts, bolts, fasteners

TOTAL (Carried Over to Summary of Civil Works) 0.00 30,50,243.63

Sl. No. DSR-2023 DESCRIPTION UNIT QTY. RATE AMOUNT

I 11.00 FLOORING WORK 0.00

1 11.5 62 mm thick cement concrete flooring with concrete hardener topping, under layer 50

mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate

20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1

cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, Sqm 464.68 1,056.15 1027.63 477525

hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture’s

specifications. This includes cost of cement slurry, but excluding the cost of nosing of

steps etc. complete.

2 11.41A Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by

the manufacturer) with water absorption less than 0.08% and conforming to IS:15622,

of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick

cement mortar 1:4 (1 cement:

4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the

joints with white cement and matching pigments etc. The tiles must be cut with the zero

chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier,

wedge, clips of required thickness, leveling system and rubber mallet for placing the

11.41A.2.1 Glazed vitrified floor tiles polished finish of size Size of Tile 600 x 600 mm Sqm 652.42 1,502.75 1462.18 953947

11.41A.3.1 Glazed Vitrified tiles MatUAntiskid finish of size Size of Tile 600 x 600 mm Sqm 72.49 1,464.85 1425.30 103321

3 16.68 Providing and laying 60mm thick factory made cement concrete interlocking paver

block of M -30 grade made by block making machine with strong vibratory compaction

and of approved size and design/ shape laid in required colour and pattern over and Sqm 557.62 972.00 945.76 527373

including 50mm thick compacted bed of course sand, filling the joints with fine sand etc.

all complete as per the direction of Engineer-in-charge.

TOTAL (Carried Over to Summary of Civil Works) 0.00 20,62,166.61

J 12.00 ROOFING 0.00

1 12.1 Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with

polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I.

limpet washers or with G.I. limpet washers filled with white lead, including a coat of

approved steel primer and two coats of approved paint on overlapping of sheets 0.00

complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost

of purlins, rafters and trusses and including cutting to size and shape wherever

12.1.1 1.00 mm thick with zinc coating not less than 275 gm/m* Sqm 464.68 1457.15 1417.81 658832

2 12.21 Providing and laying gola 75x75mm in cement concrete M15 grade including finishing

with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design in 75x75 mm rmt. 155.49 305.15 296.91 46166

3 12.22 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete

1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size)

over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 Each 42.00 298.25 290.20 12188

cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making

and finishing the outlet complete.

Sl. No. DSR-2023 DESCRIPTION UNIT QTY. RATE AMOUNT

4 12.45 Providing and fixing false ceiling at all heights including providing and

fixing of frame work made of special sections, power pressed from M.S.

sheets and galvanized with zinc coating of 120 gms/sqm (both side

inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm

wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre

to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia

x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle

hangers of 25x1 0x0.50 mm of required length with nuts & bolts of required

size and other end of angle hanger fixed with intermediate G.I. channels

45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to

which the ceiling section 0.5 mm thick bottom wedge of 80 mm with

tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre

to centre, shall be fixed in a direction perpendicular to G.I. intermediate

channel with connecting clips made out of2.64 mm dia x 230 mm long G.I.

wire at every junction, including fixing perimeter channels 0.5 mm thick

27 mm high having flanges of 20 mm and 30 mm long, the perimeter of

ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre,

with 25 mm long dry wall screws@ 230 mm interval, including fixing of

gypsum board to ceiling section and perimeter channel with the help of

dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and

finishing to a flush finish of tapered and square edges of the board with

recommended jointing compound , jointing tapes , finishing with jointing

compound in 3 layers covering upto 150 mm on both sides of joint and two

coats of primer suitable for board, all as per manufacturer's specification

and also including the cost of making openings for light fittings, grills,

diffusers, cutouts made with frame of perimeter channels suitably fixed,

all complete as per drawings, specification and direction of the Engineer

in Charge but excluding the cost of painting with :

12.45.3 12.5 mm thick tapered edge gypsum moisture resistant board sqm 65.24 1,529.10 1487.81 97067

5 12.52 Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true

horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel

sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T"

runner with suitably spaced joints to get required length and of size 24x38 mm made

from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross

"T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced

between main "T" at 600 mm center to center to form a grid of 1200x600 mm and

secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick

(minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of

600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of

approved texture in the grid including, required cutting/making, opening for services like 0.00 0

diffusers, grills, light fittings, Fixtures, smoke detectors etc. Main "T" runners to be

ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm

dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly

level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T,

bottom exposed width of 24 mm of all T-sections shall be pre-painted with

polyester paint, all complete for all heights as per specifications,

drawings and as directed by Engineer-in-charge.

12.52.3 12.5 mm thick square edge PVC Laminated Gypsum Tile of size

595x595 mm, made of Gypsum plasterboard, manufactured from

natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire

retardant PVC film on the face side and 12micron metalized polyester on the back side

with all edges sealed with the face side PVC film which goes around and wraps the

edges and is bonded to the edges and the back side m

Sl. No. DSR-2023 DESCRIPTION UNIT QTY. RATE AMOUNT

6 26.22 Providing and fixing false ceiling at all heights with integral densified

calcium silicate reinforced with fibre and natural filler false ceiling

tiles of Size 595x595 mm of approved texture, design and patterns

having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per

IS 8225:1987, Light reflectance of 85% (minimum). Non combustible

as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7),

humidity resistance of 100%, thermal conductivity < 0.043 W/m K as

per ASTM 518:1991,in true horizontal level suspended on interlocking

metal T-Grid of hot dipped galvanised iron section of 0.33mm

thick (galvanized @ 120 grams per sqm including both sides)

comprising of main- T runners of size 24x38 mm of length 3000 mm,

cross - T of size 24x32 mm of length 1200 mm and secondary

intermediate cross-T of size 24x32 mm of length 600mm to form grid 0.00 0

module of size 600 x 600 mm, suspended from ceiling using

galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50

mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully

threaded hanger rod upto 1000 mm length and L-shape level adjuster

of size 85x25x25x2 mm. Galvanised iron perimeter wall angle of size

24x24x0.40 mm of length 3000 mm to be fixed on periphery wall /

partition with the help of plastic rawl plugs at 450 mm center to

center and 40 mm long dry wall S.S screws. The work shall be

carried out as per specifications, drawing and as per directions of

the Engineer-in-Charge.

26.22.1 With 15 mm thick tegular edged light weight calcium silicate false ceiling tiles. sqm 652.42 2,207.00 2147.41 1401006

TOTAL (Carried Over to Summary of Civil Works) 0.00 23,05,784.36

K 13.00 FINISHING WORK 0.00

1 13.4 12 mm cement plaster of mix : 0.00

2 13.11 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1

cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 Sqm 801.42 518.55 504.55

cement : 6 fine sand). 4,04,356

3 13.16 6 mm cement plaster of mix : 0.00 0

4 13.21 Extra for providing and mixing water proofing material in plaster work in proportion per bag

recommended by the manufacturers. of 50kg

5 13.41 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less

than 50 gram/litre, of approved manufacturer, of required shade and colour all complete 0.00

13.41.1 New work (two or more coats) over and including water thinnable priming coat with

cement primer having VOC content less than 50 gram/litre Sqm 480.85 185.65 180.64

6 13.47 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of

required shade: 0

13.47.1 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming

coat of exterior primer applied @ 2.20 kg/10 sqm) 53,368

7 13.62 Painting with synthetic enamel paint of approved brand and manufacture of required

colour to give an even shade : 0

13.62.1 Two or more coats on new work over an under coat of suitable shade with ordinary

paint of approved brand and manufacture 72,206

Sl. No. DSR-2023 DESCRIPTION UNIT QTY. RATE AMOUNT

8 13.80 Providing and applying white cement based putty of average thickness 1 mm, of

approved brand and manufacturer, over the plastered wall surface to prepare the Sqm 3073.94 156.05 151.84

surface even and smooth complete 4,66,737

9 13.83.2 Wall painting with premium acrylic emulsion paint of interior grade, having VOC

(Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and

manufacture, including applying additional coats wherever required to achieve even

shade and colour. Two coats 4,27,107

TOTAL (Carried Over to Summary of Civil Works) 0.00 22,51,325.34

L 21.00 ALUMINIUM WORK 0.00

1 21.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with

extruded built up standard tubular sections/appropriate Z sections and other sections of

approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws

or with fixing clips, or with expansion hold fasteners including necessary filling up of

gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc.

Aluminium sections shall be smooth, rust free, straight, mitred and jointed echanically

wherever required including cleat angle, Aluminium snap beading for glazing / paneling,

C.P. brass / stainless steel screws, all complete as per architectural drawings and the

directions of Engineer-in-charge. Glazing and paneling to be paid for separately) :

a) 21.1.1 For fixed portion. 0.00

i 21.1.1.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) Kg 234.60 530.90 516.57 1,21,186.31

b 21.1.2 For shutters of doors, windows & ventilators including providing and fixing hinges/

pivots and making provision for fixing of fittings wherever required including the cost of 0.00 0.00

EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)

21.1.2.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) Kg 86.40 634.45 617.32 53,336.44

2 21.3 Providing and fixing glazing in aluminium door, window, ventilator shutters and

partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the

architectural drawings and the directions of engineer-in-charge . (Cost of aluminium

snap beading shall be paid in basic item):

i 21.3.2 With float glass panes of 5.5 mm thickness (weight not less than 12.50 kg/sqm) Sqm 86.40 1505.25 1464.61 1,26,542.15

3 21.2 Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or

graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in

aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel 0.00 0.00

screws etc. complete as per architectural drawings and directions of engineer-in-

Pre-laminated particle board with decorative lamination on

TOTAL (Carried Over to Summary of Civil Works) 0.00 10,77,802.95

M 22.00 WATER PROOFING 0.00

1 22.7 Providing & laying integral cement based water proofing treatment including preparation

of surface as required for treatment of roofs, balconies, terraces etc consisting of

following operations: a) Applying a slurry coat of neat cement using 2.75kg/sqm of

cement admixed with water proofing compound confirming to IS. 2645 and approved by

Engineer-in-charge over the RCC slab including adjoining walls upto 300mm height

including cleaning the surface before treatment. b) Laying brick bats with mortar using

broken bricks/brick bats 25mm to 115mm size with 50% of cement mortar 1:5 (1

cement : 5 coarse sand ) admixed with water proofing compound confirming to IS :

2645 and approved by Engineer-in-charge over 20 mm thick layer of cement of 1:5 ( 1

cement : 5 coarse sand ) admixed with water proofing compound confirming to IS :

2645 and approved by Engineer-in-charge to required slope and treating similarly the

Sl. No. DSR-2023 DESCRIPTION UNIT QTY. RATE AMOUNT

adjoining walls upto 300mm height including rounding of junctions of walls and slabs. c)

After two days of proper curing applying a second coat of cement slurry using

2.75kg/sqm of cement admixed with water proofing compound confirming to IS : 2645

and approved by Engineer-in-charge. d) Finishing the surface with 20 mm thick

jointless cement mortar 1:4 (1 cement : 4 coarse sand ) admixed with water proofing

compound confirming to IS : 2645 and approved by Engineer-in-charge including laying

glass fibre cloth of approved quality in top layer and finally finishing the surface with

trowel with neat cement slurry and making pattern of 300x300 mm square 3mm deep.

e) The whole terrace so finished shall be flooded with water for a minimum period of

two weeks for curing and for final test. All above operations to be done in order and as

directed and specified by the Engineer-in-charge:

i 22.7.1 With average thickness of 120mm and minimum thickness at khurra as 65mm. SQM 483.27 1684.60 1639.12 7,92,137.75

TOTAL (Carried Over to Summary of Civil Works) 7,92,137.75

ALL SUB-HEAD TOTAL (CIVIL WORKS) 305,35,045.20

1.00 HORTICULTURE WORKS

1 2.35 Providing & laying Selection no. 1 doob grass turf with earth 50mm to 60mm thickness

of existing ground prepared with proper level and ramming with required tools wooden

and than rolling the surface with light roller make the surface smoothen and light

watering the same maintenance for 30 days or more till the grass establish properly,as

per direction of officer in charge

adjoining walls upto 300mm height including rounding of junctions of walls and slabs. c)

After two days of proper curing applying a second coat of cement slurry using

2.75kg/sqm of cement admixed with water proofing compound confirming to IS : 2645

and approved by Engineer-in-charge. d) Finishing the surface with 20 mm thick

jointless cement mortar 1:4 (1 cement : 4 coarse sand ) admixed with water proofing

compound confirming to IS : 2645 and approved by Engineer-in-charge including laying SQM 1599.66 103.25 1,65,164.48

glass fibre cloth of approved quality in top layer and finally finishing the surface with

trowel with neat cement slurry and making pattern of 300x300 mm square 3mm deep.

e) The whole terrace so finished shall be flooded with water for a minimum period of

two weeks for curing and for final test. All above operations to be done in order and as

directed and specified by the Engineer-in-charge:

TOTAL (Carried Over to Summary of Civil Works) 1,65,164.48

Project A- Establishment of Centre (Lab) of Excellence on Nutria- Cereals at RLBCAU, Jhansi

1 SANITARY INSTALLATION 1,25,079.88

2 WATER SUPPLY 7,70,688.00

3 INTERNAL DRAINAGE 3,52,446.00

4 RAIN WATER WORK 1,06,972.59

5 EXTERNAL WATER SUPPLY WORK 1,21,762.39

6 EXTERNAL SEWER WORK 2,51,646.80

Digitally signed by ARTI

Project A- Establishment of Centre (Lab) of Excellence on Nutria- Cereals at RLBCAU, Jhansi

DETAILED PLUMBING ESTIMATE

SI.No. DSR-2023/ Description of Item UNIT TOTAL DSR RATE Rate(facto DSR AMOUNT

NON DSR QUANTITY r @0.973)

A) SANITARY INSTALLATION

1 17.2 Providing and fixing white vitreous china pedestal type water

closet (European type W.C. pan) with seat and lid, 10 litre

low level white P.V.C. flushing cistern, including flush pipe,

with manually controlled device (handle lever), conforming to

IS : 7231, with all fittings and fixtures complete, including

cutting and making good the walls and floors wherever

17.2.1 W.C. pan with ISI marked white solid plastic seat and lid Each 5 6515.55 6339.63 31698.15

2 17.7 Providing and fixing wash basin with C.I. brackets, 15 mm 0.00

C.P. brass pillar taps, 32 mm C.P. brass waste of standard

pattern, including painting of fittings and brackets, cutting and 0.00

making good the walls wherever require :

17.7.4 White Vitreous China Flat back wash basin size 550x400 mm 9142.31

with single 15 mm C.P. brass pillar tap

3 17.10.1 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen 0.00

sink as per IS:13983 with C.I. brackets and stainless steel

plug 40 mm, including painting of fittings and brackets, cutting 0.00

and making good the walls wherever required : Kitchen

sink with drain board

4 17.16a Providing and fixing 8mm dia C.P./S.S. Jet with flexible tube Each 5 349.15 1698.61

upto 1meter long with S.S. Triangular plate to european type

W.C. Of approved quality and make as approved by engineer 339.72

Digitally signed by ARTI

Project A- Establishment of Centre (Lab) of Excellence on Nutria- Cereals at RLBCAU, Jhansi

DETAILED PLUMBING ESTIMATE

SI.No. DSR-2023/ Description of Item UNIT TOTAL DSR RATE Rate(facto DSR AMOUNT

NON DSR QUANTITY r @0.973)

5 17.22A Providing and fixing CP Brass 32mm size bottle trap of Each 5 1034.80 5034.30

approved quality & make and as per the direction of engineer 1006.86

6 17.30 Providing and fixing in position 25 mm diameter mosquito Each 5 55.65 270.74

proof coupling of approved municipal design. 54.15

7 17.31 Providing and fixing 600x450 mm beveled edge mirror of Each 5 1607.95 7822.68

superior glass (of approved quality) complete with 6 mm thick

hard board ground fixed to wooden cleats with C.P. brass 1564.54

screws and washers complete.

7 17.34 Providing and fixing toilet paper holder : 0.00 0.00

8 17.71 Providing and fixing PTMT liquid soap container 109 mm wide, Each 5 168.35 819.02

125 mm high and 112 mm distance from wall of standard

shape with bracket of the same materials with snap fittings of 163.80

approved quality and colour, weighing not less than 105 gms.

9 17.72 Providing and fixing PTMT towel ring trapezoidal shape 215 Each 5 231.95 1128.44

mm long, 200 mm wide with minimum distances of 37 mm

from wall face with concealed fittings arrangement of 225.69

approved quality and colour, weighing not less than 88 gms.

Digitally signed by ARTI

Project A- Establishment of Centre (Lab) of Excellence on Nutria- Cereals at RLBCAU, Jhansi

DETAILED PLUMBING ESTIMATE

SI.No. DSR-2023/ Description of Item UNIT TOTAL DSR RATE Rate(facto DSR AMOUNT

NON DSR QUANTITY r @0.973)

17.73.2 Providing and fixing PTMT towel rail complete with brackets Each 5 708.95 3449.04

fixed to wooden cleats with CP brass screws with concealed

fittings arrangement of approved quality and colour.

600 mm long towel rail with total length of 645 mm, width78 689.81

mm and effective height of 88 mm, weighing not lessthan 190

10 18.21.2.1 Providing and fixing uplasticised PVC connection pipe with Each 10 97.75 951.11

brass unions : 45 cm length , 15 mm nominal bore

11 18.49 Providing and fixing C.P. brass bib cock of approved quality 0.00

conforming to IS:8931 : 0.00

12 18.51 Providing and fixing C.P. brass long body bib cock of 0.00

approved quality conforming to IS standards and weighing not 0.00

less than 690 gms.

18.52.1 Providing and fixing C.P. brass stop cock (concealed) of Each 10 670.45 6523.48

standard design and of approved make conforming to 652.35

IS:8931.15 mm diameter

13 18.53 Providing and fixing C.P. brass angle valve for basin mixer 0.00

14 18.58.1.1 Providing and fixing PTMT grating of approved quality and 548.77

colour. Each 15 37.60 36.58

Circular type100 mm nominal dia

Digitally signed by ARTI

Project A- Establishment of Centre (Lab) of Excellence on Nutria- Cereals at RLBCAU, Jhansi

DETAILED PLUMBING ESTIMATE

SI.No. DSR-2023/ Description of Item UNIT TOTAL DSR RATE Rate(facto DSR AMOUNT

NON DSR QUANTITY r @0.973)

B) WATER SUPPLY 0.00

1 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)

pipes, having thermal stability for hot & cold water supply,

including all CPVC plain & brass threaded fittings, i/c fixing the

pipe with clamps at 1.00 m spacing. This includes jointing of

pipes & fittings with one step CPVC solvent cement and the 0.00

cost of cutting chases and making good the same including

testing of joints complete as per direction of Engineer in

Concealed work, including cutting chases and making

good the walls etc.

2 18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) 0.00

pipes, having thermal stability for hot & cold water supply,

including all CPVC plain & brass threaded fittings, including

fixing the pipe with clamps at 1.00 m spacing. This includes 0.00

jointing of pipes & fittings with one step CPVC solvent cement

and testing of joints complete as per direction of Engineer in

Internal work - Exposed on wall 0.00 0.00

Digitally signed by ARTI

Project A- Establishment of Centre (Lab) of Excellence on Nutria- Cereals at RLBCAU, Jhansi

DETAILED PLUMBING ESTIMATE

SI.No. DSR-2023/ Description of Item UNIT TOTAL DSR RATE Rate(facto DSR AMOUNT

NON DSR QUANTITY r @0.973)

18.62 Providing and fixing PTMT Ball cock of approved quality, 0.00

colour and make complete with Epoxy coated aluminium rod 0.00

with L.P./ H.P.H.D. plastic ball.

a) 18.62.3 25 mm nominal bore, 152mm long, weighing not less than 440 Each 10 523.80 5096.57

18.65 Providing and fixing PTMT soap Dish Holder having length of Each 10 111.45 1084.41

138mm,breadth 102mm, height of 75mm with concealed fitting 108.44

arrangements, weighing not less than 106 gms.

C) INTERNAL DRAINAGE 0.00

3 17.35 Providing and fixing soil, waste and vent pipes 0.00

17.35.1.3 Hubless centrifugally cast (spun) iron pipes epoxy coated Mtr 170 1169.30 193413.91

inside & outside IS:15905

4 17.36 Providing and filling the joints with spun yarn cement slurry 0.00

and cement mortar 1:2 (1 cement: 2 fine sand) in S.C. I I C. I 0.00

5 17.37 Providing and fixing M.S. holder-bat clamps of approved 0.00

design to Sand Cast iron/cast iron (spun) pipe embedded in

and including cement concrete blocks 10x10x10 cm of 1:2:4

mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20

mm nominal size), including cost of cutting holes and making

good the walls etc. :

6 17.38 Providing and fixing bend of required degree with access door, 0.00

insertion rubber washer 3 mm thick, bolts and nuts

Digitally signed by ARTI

Project A- Establishment of Centre (Lab) of Excellence on Nutria- Cereals at RLBCAU, Jhansi

DETAILED PLUMBING ESTIMATE

SI.No. DSR-2023/ Description of Item UNIT TOTAL DSR RATE Rate(facto DSR AMOUNT

NON DSR QUANTITY r @0.973)

17.38.1.3 Hubless centrifugally cast (spun) iron pipes epoxy coated Each 10 567.20 5518.86

inside & outside IS:15905 551.89

7 17.39 Providing and fixing plain bend of required degree. 0.00 0.00

17.39.1.3 Hubless centrifugally cast (spun) iron pipes epoxy coated Each 10 368.00 3580.64

inside & outside IS:15905

8 17.40 Providing and fixing heel rest sanitary bend: 0.00 0.00

17.40.1.2 Sand cast iron S&S as per IS:3989 Each 10 548.70 533.89 5338.85

9 17.43 Providing and fixing single equal plain junction of required 0.00

degree with access door, insertion rubber washer 3 mm thick, 0.00

bolts and nuts complete.

a) 17.43.1.2 100x100x100 mm Sand cast iron S&S as per IS - 3989 Each 6 925.70 900.71 5404.24

10 17.44 Providing and fixing single equal plain junction of required 0.00

17.44.1.3 Hubless centrifugally cast (spun) iron epoxy coated inside & Each 6 581.45 3394.51

outside as per IS:15905

10 17.55 Providing and fixing door piece, insertion rubber washer 3mm 0.00

thick, bolts & nuts complete :

a) 17.55.1.2 100 mm Sand cast iron S&S as per IS - 3989 Each 3 683.85 665.39 1996.16

11 17.56 Providing and fixing terminal guard. 0.00 0.00

17.56.1.3 Hubless centrifugally cast (spun) iron epoxy coated inside & Each 5 427.80 2081.25

outside as per IS:15905

12 17.58 Providing lead caulked joints to sand cast iron/centrifugally 0.00

cast (spun) iron pipes and fittings of diameter : 0.00

Digitally signed by ARTI

Project A- Establishment of Centre (Lab) of Excellence on Nutria- Cereals at RLBCAU, Jhansi

DETAILED PLUMBING ESTIMATE

SI.No. DSR-2023/ Description of Item UNIT TOTAL DSR RATE Rate(facto DSR AMOUNT

NON DSR QUANTITY r @0.973)

13 17.60 Providing and fixing trap of self cleansing design with screwed 0.00

down or hinged grating with or without vent arm complete,

including cost of cutting and making good the walls and floors

a) 17.60.1.3 100 mm inlet and 100 mm outlet Hubless centrifugally cast Each 5 854.55 4157.39

(spun) iron epoxy coated inside & outside as per IS:15905 831.48

a) 17.60.2.3 100 mm inlet and 75 mm outlet Hubless centrifugally cast Each 5 591.40 2877.16

(spun) iron epoxy coated inside & outside as per IS:15905

D) RAIN WATER WORK 0.00

14 12.41 Providing and fixing on wall face unplasticised Rigid PVC rain

water pipes conforming to IS : 13592 Type A, including jointing

with seal ring conforming to IS : 5382, leaving 10 mm gap for 0.00

thermal expansion, (i) Single socketed pipes.

15 12.42 Providing and fixing on wall face unplasticised - PVC moulded 0.00

fittings/ accessories for unplasticised Rigid PVC rain water

pipes conforming to IS : 13592 Type A including jointing with 0.00

seal ring conforming to IS : 5382 leaving 10 mm gap for

thermal expansion.

a) 12.42.2 Single Push fit coupler 0.00 0.00

b) 12.42.3 Single Tee with door 0.00 0.00

Digitally signed by ARTI

Project A- Establishment of Centre (Lab) of Excellence on Nutria- Cereals at RLBCAU, Jhansi

DETAILED PLUMBING ESTIMATE

SI.No. DSR-2023/ Description of Item UNIT TOTAL DSR RATE Rate(facto DSR AMOUNT

NON DSR QUANTITY r @0.973)

16 12.44 Providing and fixing to the inlet mouth of rain water pipe cast Each 15 54.70 798.35

iron grating 15 cm diameter and weighing not less than 440 53.22

17 12.43 Providing and fixing unplasticised -PVC pipe clips of approved 0.00

design to unplasticised - PVC rain water pipes by means of

50x50x50 mm hard wood plugs, screwed with M.S. screws of

required length, including cutting brick work and fixing in 0.00

cement mortar 1:4 (1 cement : 4 coarse sand) and making

good the wall etc. complete.

18 12.22 Making khurras 45x45 cm with average minimum thickness of Each 15 298.25 4352.96

5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4

graded stone aggregate of 20 mm nominal size) over P.V.C.

sheet 1 m x1 m x 400 micron, finished with 12 mm cement 290.20

plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat

cement, rounding the edges and making and finishing the

outlet complete.

19.6 Providing and laying non-pressure NP2 class (light duty) 0.00

R.C.C. pipes with collars jointed with stiff mixture of cement

mortar in the proportion of 1:2 (1 cement : 2 fine sand)

including testing of joints etc. complete :

E) EXTERNAL WATER SUPPLY WORK 0.00

19 18.12 Providing and fixing G.I. pipes complete with G.I. fittings

including trenching and refilling etc.

Digitally signed by ARTI

Project A- Establishment of Centre (Lab) of Excellence on Nutria- Cereals at RLBCAU, Jhansi

DETAILED PLUMBING ESTIMATE

SI.No. DSR-2023/ Description of Item UNIT TOTAL DSR RATE Rate(facto DSR AMOUNT

NON DSR QUANTITY r @0.973)

F) EXTERNAL SEWER WORK 0.00

20 2.10 Excavating trenches of required width for pipes, cables, etc

including excavation for sockets, anddressing of sides,

ramming of bottoms, depth up to 1.5 m, including getting out

the excavated soil, and then returning the soil as required, in

layers not exceeding 20 cm in depth, including

consolidatingeach deposited layer by ramming, watering, etc.

and disposing of surplus excavated soil as directed,within a

2.10.1 All kinds of soil 0.00

2.10.1.2 Pipes, cables etc. exceeding 80 mm dia but not exceeding metre 21 352.15 7195.48

21 19.4.1.1 Providing and fixing square-mouth S.W. gully trap class SP-1 Each 5 2707.65 13172.72

complete with C.I. grating brick masonry chamber with water

tight C.I. cover with frame of 300x300 mm size (inside) the

weight of cover to be not less than 4.50 kg and frame to be

not less than 2.70 kg as per standard design: 100x100 mm

size P type. With common burnt clay F.P.S. (non modular)

bricks of class designation 7.5

Digitally signed by ARTI

Project A- Establishment of Centre (Lab) of Excellence on Nutria- Cereals at RLBCAU, Jhansi

DETAILED PLUMBING ESTIMATE

SI.No. DSR-2023/ Description of Item UNIT TOTAL DSR RATE Rate(facto DSR AMOUNT

NON DSR QUANTITY r @0.973)

22 19.7 Constructing brick masonry manhole in cement mortar 1:4 ( 1 0.00

cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1

cement : 2 coarse sand : 4 graded stone aggregate 20 mm

nominal size), foundation concrete 1:4:8 mix (1 cement : 4

coarse sand : 8 graded stone aggregate 40 mm nominal size),

inside plastering 12 mm thick with cement mortar 1:3 (1

cement : 3 coarse sand) finished with floating coat of neat

cement and making channels in cement concrete 1:2:4 (1

cement : 2 coarse sand : 4 graded stone aggregate 20 mm

nominal size) finished with a floating coat of neat cement

complete as per standard design :

Inside size 90x80 cm and 45 cm deep including C.I. cover with 0.00

frame (light duty) 455x610 mm internal dimensions,total

weight of cover and frame to be not less than 38 kg (weight of 0.00

cover 23 kg and weight of frame 15 kg) :

19.7.1.1 With common burnt clay F.P.S.(non modular) bricks of class Each 8 12770.55 99405.96

designation 7.5 12425.75

23 19.8 Extra for depth for manholes: 0.00 0.00

19.8.1.1 With common burnt clay F.P.S.(non modular) bricks of class Mtr 10 8825.40 85871.14

designation 7.5 8587.11

Digitally signed by ARTI

Project A- Establishment of Centre (Lab) of Excellence on Nutria- Cereals at RLBCAU, Jhansi

DETAILED PLUMBING ESTIMATE

SI.No. DSR-2023/ Description of Item UNIT TOTAL DSR RATE Rate(facto DSR AMOUNT

NON DSR QUANTITY r @0.973)

24 19.9 Constructing Brick Masonry circular type manhole 0.91 m 0.00

internal dia at bottom and 0.56m dia at top with FPS bricks

class designation 75 in cement mortar 1:4 (1 cement : 4

Coarse sand), inside cement plaster 12mm thick with cement

mortar 1:3 ( 1 cement : 3 coarse sand) finished with a floating

coat of of neat cement, foundation concrete 1:3:6 mix ( 1

cement : 3 coarse sand : 6 graded stone aggregate 40mm

nominal size) and making necessary channel in Cement

Concrete 1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone

Aggregate 20mm nominal size) finished with a floating coat of

neat cement complete as per standard design.

19.9.1 0.91m deep with SFRC cover and frame (heavy duty HD-20 0.00

grade designation) 560mm internal diameter conforming to

I.S:12592, total weight of cover and frame to be not less than

182Kg. fixed in cement concrete 1:2:4 mix (1cement: 2 coarse

sand: 4 graded stone aggregate 20mm nominal size) including 0.00

centering, shuttering all complete.(Excavation foot rests and

12mm thick cement plaster at the external surface shall be

paid for separately)

19.9.1.1 with common burnt clay F.P.S.(non module) brick of class Each 2 12725.00 24762.85

designation 7.5

25 19.10 Extra depth for circuler type manholes 0.91 m internal dia ( at 0.00

bottom ) beyond 0.91m to 1.67 m .

19.10.1 with common burnt clay F.P.S.(non module) brick of class Meter 2 7591.80 14773.64

designation 7.5

Digitally signed by ARTI

Project A- Establishment of Centre (Lab) of Excellence on Nutria- Cereals at RLBCAU, Jhansi

DETAILED PLUMBING ESTIMATE

SI.No. DSR-2023/ Description of Item UNIT TOTAL DSR RATE Rate(facto DSR AMOUNT

NON DSR QUANTITY r @0.973)

26 19.16 Providing orange colour safety foot rest of minimum 6 mm Each 12 553.70 6465.00

thick plastic encapsulated as per IS : 10910, on 12 mm dia

steel bar conforming to IS: 1786, having minimum cross

section as 23 mmx25 mm and over all minimum length 263

mm and width as 165 mm with minimum 112 mm space

between protruded legs having 2 mm tread on top surface by

ribbing or chequering besides necessary and adequate

anchoring projections on tail length on 138 mm as per 538.75

standard drawing and suitable to with stand the bend test and

chemical resistance test as per specifications and having

manufacture's permanent identification mark to be visible even

after fixing, including fixing in manholes with 30x20x15 cm

cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6

graded stone aggregate 20 mm nominal size) complete as per

Digitally signed by ARTI

Project A- Establishment of Centre (Lab) of Excellence on Nutria- Cereals at RLBCAU, Jhansi

Sl. Item Description Unit Qty. Rate in Rs. Rate(@1.0633) DSR Amount in

No. Code. Rs.

A. DSR- SCHEDULE ITEMS (DSR-2022) (PART-A)

1 D.S.R 1.10 Point Wiring in Medium Class PVC Conduit, with Modular

type Switch: Wiring for light point/ fan point/ exhaust fan

point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper

conductor single core cable in surface/recessed Medium Class

PVC conduit, with modular type switch, modular plate, suitable

size of GI box and earthing the point with 1.5 sq.mm. FRLS PVC

insulated copper conductor single core cable etc as required.

2 1.55 Wiring for group controlled (looped) light point/fan point/exhaust 0.00

point/ call bell point ( without independent switch etc.) with 1.5

FRLS PVC insulated copper conductor single core cable in

recessed PVC conduit, and earthing the point with 1.5 sq. mm

PVC insulated copper conductor single core cable etc. as

3 D.S.R 1.12 Wiring for light/power plug with 2x4 Sq.mm FRLS PVC insulated Mtr. 300 334.00 355.14 1,06,542.66

copper conductor single core cable in surface/recessed Medium

Class PVC conduit along with 1 No. 4 Sq.mm FRLS PVC insulated

copper conductor single core cable for loop earthing etc. as

4 D.S.R 1.14 Wiring for circuit/ submain wiring alongwith earth wire with the 0.00 0.00

following sizes of FRLS PVC insulated copper condcutor, single

core cable in surface/ recessed Medium Class PVC conduit as

5 D.S.R 1.18 Telephone Wiring in Existing Conduit:- Supplying and 0.00 0.00

drawing, following pair, 0.5 sq.mm FRLS PVC insulated copper

conductor, unarmoured telephone cable in the existing surface /

recessed steel / PVC conduit as required.

6 (D.S.R.) TV cable in Existing Conduit:- 0.00 0.00

Supplying and drawing, co-axial TV cable RG-6 grade 0.7 mm Mtrs. 50 47.00 49.98 2,498.76

solid copper conductor, PE insulated sealed with fibne tinned

copper braid and protectedwith PVC sheath in the existing

surface/ recessed steel / PVC conduit as required.

7 D.S.R 1.21 S/F PVC Conduit: Supplying and fixing of following sizes of 0.00 0.00

Med Class PVP conduit along with the accessories in surface /

recess & cutting the wall and making good the same in case of

recessed conduit as required for TV and TEL out lets.

8 D.S.R. Supplying and fixing of following switch/ socket on the existing 0.00 0.00

1.24 modular plate & switch box including connections but excluding

modular plate etc. as reqd.

1.24.5 6 pin 15/16 amp socket outlet Each 2 197.00 209.47 418.94

1.24.6 Telephone socket outlet Each 3 148.00 157.37 472.11

1.24.7 TV antenna socket outlet Each 2 148.00 157.37 314.74

9 D.S.R. Supplying and fixing Two Module Stepped type electronic Each 2 369.00 392.36 784.72

1.25 fan regulator on the existing modular plate & switch box

including connections but excluding modular plate etc. as reqd.

10 D.S.R. Supplying and fixing modular blanking plate on the existing Each 20 40.00 42.53 850.64

1.26 modular plate & switch box excluding modular plate as required.

11 D.S.R. Supply and fixing of following size/ modules, GI box along with 0.00 0.00

1.27 modular base & cover plate for modular switch/ regulator in

recess, including connection as required.

1.27.4 6 module (200mmx 75mm) (for 2 nos. 6A Sockets & 2no. 6A Each 4 402.00 427.45 1,709.79

12 D.S.R. Supplying and fixing suitable size GI box with modular plate and Each 32 477.00 507.19 16,230.21

1.31 cover in front on surface or in recess including providing and

fixing 3 pin 5/6 Amp modular socket outlet and 5/6 A modular

type switch, connections painting etc. as reqd. (for Light plug

13 D.S.R. Supplying and fixing suitable size GI box with modular plate and Each 20 586.00 623.09 12,461.88

1.32 cover in front on surface or in recess including providing and

fixing 6 pin 5/6 & 15/16 Amp modular socket outlet and 15/16

A modular type switch, connections painting etc. as reqd.

14 D.S.R. Supplying & fixing of 3 pin, 5 amp Ceiling rose on the existing Each 27 87.00 92.51 2,497.69

1.33 junction box/ wooden block including connection as required.

15 D.S.R. Installation of exhaust fan in the existing opening, including 0.00 0.00

1.50 making good the damage, connection, testing, commissioning

etc. as required.

16 D.S.R. Supplying and drawing of UTP 4 pair CAT 6 LAN Cable (AWG-23) 0.00 0.00

1.53 in the existing surface/ recessed steel/ PVC conduit as required.

17 D.S.R 2.3 Supplying and fixing following way single pole & neutral, sheet 0.00 0.00

steel, MCCB distribution board, 240V, on surface/ recces ,

complete with tinned copper bus bar, neutral bar, earth bar, din

bar interconnections, powder painted including earthing etc. as

required (But without MCCB/RCCB/Isolator)

2.3.1 6 way Double door (to Be use for HVAC OUT DOOR UNIT F/P Each 2 2,206.00 2,345.64 4,691.28

18 D.S.R 2.4 Supplying and fixing following way, horizontal type thee pole & 0.00 0.00

neutral, sheet steel, MCCB distribution board, 415V, on surface/

recces , complete with tinned copper bus bar, neutral bar, earth

bar, din bar interconnections, powder painted including earthing

etc. as required (But without MCCB/RCCB/Isolator)

19 D.S.R 2.10 Supplying & fixing 5 amps to 32 amps rating 240/415 volts 10 0.00 0.00

kA, C curve Miniature Circuit Breaker suitable for inductive loads

of following poles in the existing MCB DB complete with

connections, testing and commissioning etc. as required.

2.10.5 Triple Pole and neutral Each 4 1,228.00 1,305.73 5,222.93

20 D.S.R 2.14 Supplying & fixing following rating double pole (Single Phase & 0.00 0.00

Neutral) 240 V, Resudual Curren Circuit Breaker (RCCB) ,

having a sensitivity current uo to 300mA in the existing MCB DB

complete with connections, testing and commissioning etc. as

21 D.S.R Providing & fixing of M.V. danger notice plate of 200 mm x 150 Each 4 269.00 286.03 1,144.11

2.21 mm, made of mild steel, at least 2 mm thick, and vitreous

enamelled white on both sides, and with inscription in single red

colour on front side as required.

4.1 Supplying and installing following size of perforated painted with 0.00 0.00

powder coating M.S. cable trays with perforation not more than

17.5%, in convenient sections, joined with connectors,

from the ceiling with M.S. suspenders including bolts & nuts,

painting suspenders etc as required.

4.1.4 300 mm width X 50 mm depth X 1.6 mm thickness Metre 50 777.00 826.18 41,309.21

22 D.S.R. EARTHING SYSTEM 0.00 0.00

i) 5.2 Earthing with G.I. Earth Pipe 4.5 Meter long , 40mm dia 0.00 0.00

including accessories, and providing massonry enclosure with

cover plate having locking arragement and watering pipe etc.

with charcoal/cock and salt as required.

5.6 Earthing with copper Earth plate 600mm x 600mm x 6mm thick Each 4 13,838.00 14,713.95 58,855.78

including accessories, and providing masonary enclosure with

cover plate having locking arrangement and watering pipe of

2.7 Meter long etc. (with charcoal and salt as required). (for UPS

iii) D.S.R. Supplying and laying 25 mm X 5 mm GI strip at 0.50 meter Mtr 130 144.00 153.12 19,904.98

5.9 below ground/surface as strip earth electrode, including

connection/ terminating with nut, bolt, spring, washer etc. as

required (Jointing shall be done by overlapping and with 2 sets

of G.I. nut bolt & spring washer spaced at 50 mm)

iv) D.S.R. Providing and fixing 4mm dia copper wire on surface or in recess Mtr 460 155.00 164.81 75,813.29

5.17 in 25 mm medium class PVC PIPE for loop earthing as required.

23 D.S.R.- Supply, installation Testing and commissioning of 1200 mm Each 35 2,730.00 2,902.81 1,01,598.32

2022 sweep, BEE 5 star rated, ceiling with Brush Less Direct Current

page no.- (BLDC) Motor,class of insulattion: B, 3 nos. blades,30 cm long

72 down rod, 2 nos. canopies, shacklet kit, safety rope, copper

19.1 winding, Power Factor not less than 0.9, Service Value

(CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min,

350 RPM (tolerance as per IS: 374-2019) THD less than 10%

remote or electronic regulator unit for speed control and all

remaining accessories including safety pin, nut bolts, washers,

Temperature rise=75 degree C (Max.) insulation resistance more

than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC

Supplyinging and drawing of UTP 4 pair CAT 6 LAN Cable Mtr 200.00 57 11,400.00

in the existing surface/ recessed steel/ PVC conduit as

TOTAL OF SCHEDULE ITEMS-(DSR-2022) (PART-A) 14,80,262.82

NON SCHEDULE ITEMS

1 MR Supplying of Exhaust fan of approved make as per Each 5.00 2880.00 14,400.00

instruction and approval.

2 MR Supplying of 2'X2' Panel light of 36 watt with hanging Each 36.00 4140.00 1,49,040.00

arrangement of approved make as per instruction and

3 MR Supplying of tube light of 20 watt IP65 with hanging Each 16.00 1220.00 19,520.00

arrangement of approved make as per instruction and

4 MR Hi wall Split units- Supply, Installation, testing and Each 10.00 71083.80 7,10,838.00

commissioning of Air-cooled DX type Hi-wall split air

conditioners each comprising an outdoor unit(s)

consisting of hermetically sealed compressor suitable for

operation on 230V, 50Hz, 1 Phase AC supply, air cooled

condenser, condenser fan along with Cooling thermostats

etc. with outer casing and indoor fan coil unit consisting

of centrifugal fans, fan motor, DX cooling coil, outer

casing, filter, control and power panel with remote etc.

entire cabling and wiring from indoor to outdoor (as per

the actualdirection of Engineer-in-charge), insulation and

with full charge of refrigerant gas and oil, supports,

canvas connection etc. complete. The indoor and outdoor

units shall be with structural steel supports, angles, rods

etc. The quoted price shall also include 24G soft copper

refrigerant piping of required length from indoor to

outdoor as per the actual direction of Engineer-in-charge

(minimum 20mtrs length) with 13 mm "O" class factory

Video Surveillance System(IP CCTV)

5 MR SITC of IP Network PTZ Camera, 2MP IP PTZ Dome Each 2.00 119240 2,38,480.00

Camera, 1 / 2.8" Progressive scan CMOS, 30x optical

zoom, 4.7-141mm, 100M IR, Micro SD card slot up to 256

GB, AC 24V/3A±10%/PoE, IP66 & IK 10, 2mp at 30FPS,

1920 x 1080 @60FPS, min 0.005 Lux @ F1.2 color view &

0 lux for B/W with IR on, shutter time is

1/100000s~1s,AGC,AWB,Deblur, Defog, EIS, True

day/night, 120db True WDR, 3D DNR, HLC & BLC, Triple

streams, Smart codec by ROI, PTZ Position Display, 3D

positioning, 300 Preset Points, 8 Patrols, up

to 8 presets each patrol; 4 Patterns 360° endless Pan,Pan

Manual Speed: 0.1°~320°/s, Preset Speed: 320°/s, -

5°~90°(Auto Flip), Tilt Manual Speed: .1°~180°/s, Preset

Speed: 180°/s, Should support

H.265+/H.265/H.264+/H.264/MJPEG,Audio & Alarm I/O

por ONVIF Profile S, T standard. CE, FCC, BIS approved

including mounting accessories complete as required

6 MR Supply, installation, testing and commissioning of 32 Each 1.00 263000 2,63,000.00

7 MR Supply, installation, testing and commissioning of Each 2.00 26138 52,276.00

Enterprise Class 6TB HDD.

8 MR Supply, installation, testing and commissioning of Video Each 2.00 10297 20,594.00

Management System (VMS) software shall be used to

view live and recorded video from capture cards and IP

devices connected to local and wide area networks. The

VMS software shall have a client/server-based

architecture that can be configured as a standalone VMS

system with the client software running on the server

hardware and/or the client running on any network-

connected TCP/IP workstation. Multiple client

workstations shall be capable of simultaneously viewing

live and/or recorded video from one or more servers.

Multiple servers shall also be able to simultaneously

provide live and/or recorded video to one or more

workstations. The VMS server software shall also have the

ability to be installed on an IP edge device—such as an

IP camera or encoder that allows for 3rd party

9 MR Supply, Installation, Testing and Commissioning of Each 1.00 124515 1,24,515.00

Workstation PC: Intel(R) Core(TM) i7-3770 Processor (8M

Cache, up to 3.90 GHz); Memory: 4GB, NON-ECC,

1600MHZ; RAM: 4GB (1x4GB) Non-ECC DDR3 1600MHz

SDRAM Memory; Keyboard: 12 function keys; Chassis:

Tower/Workstation; DVD: 8X Slimline DVD+/-RW, Data

Only; 20" TFT Monitor; Dual Graphics Card; Network

interface card: Integrated Intel(R) 82579LM Gigabit1

Ethernet LAN 10/100/1000; Hard disk: 250GB, 7200 RPM

3.5" SATA 6Gb/s Hard Drive; Operating system: Windows

7 Professional 64 Bit.

10 MR Supplying, Installation,Testing & Commissioning of 55 " Each 1.00 119763 1,19,763.00

LED Full HD TV Resolution 1920 x 1080 ,Contrast Ratio

(Typical) 5000:1,Built-in Speaker (10W + 10W),

Magic Clone (to USB), Auto Source Switching &

Recovery, Lamp Error Detection, Super Clear

Coating, Temperature Sensor, Plug and Play (DDC2B),

Pivot Display, Clock Battery, PIP/PBP, Video Wall

(10x10), Image Rotation, Button Lock, HDCP

Support, Smart Scheduling, Smart F/W update, Built-

11 MR Supply, installation, testing and commissioning of 6 u/9" Each 1.00 9000 9,000.00

width, 650 mm depth, rack assembly made of alluminium

channels for the DVR and associated equipment.

12 MR Supply and Installation of 3 watt LED Signage Each 10.00 12590 1,25,900.00

13 MR SITC of interactive 3LCD based Projector with white Each 1.00 850876 8,50,876.00

board specially designed for smart class room with

WUXGA Contrast Ratio:16,000:1 Inputs &

Interfaces:Interactive,Brightness Range Lumens

3500:Ultra Short Throw Features, Wifi,Network:

Wired LAN: RJ45 x 1 (100Mbps) Wireless: Optional

(ELPAP10),Control I/O:

RS-232C: D-Sub 9pin x 1

Interactive Sync: Stereo Mini Jack IN x 1, OUT x 1

Touch Unit Control: Yes,Screen Size :

14 MR Supplying, fixing & testing of approved make of 85 watt Each 5.00 4876 24,380.00

LED roadway / street light luminaire with epoxy powder

coatedsheet aluminium / steel housing with epoxy white

powder coated CRCA sheet steel gear tray ,clear acrylic

cover with necessary materials connection including

mounting with GI pipe 32 mm OD, clamps on existing wall

/ pole etc. complete as required

15 MR Supply, instalation, testing & commissioning of 13 Mtr

High Mast System hot dipgalvanised (singledip) and

suitable for wind velocity as per IS875 part3, with

lowering and raising motorized unit, with carriage

assembly for 6 Luminaries and its control gear box,

lighting stand and avaition light and lightning arrestor.

The mast shallbe in three finished sections.It shall also

include accessories for 13 Mtr high mast including head

frame,steel wire rope 6mm dia,trailing cable,double drum

winch,galvanized lantern carriage arrangement suitable

for 6 luminaires symmetrically & its control gear boxes

and lighting finial with internal power tool.

Supply, instalation, testing & commissioning of foundation

bolts manufactured from special steel alongwith

nuts,washers, anchor plates & templates.

Supply, instalation, testing & commissioning of control

panel with suitable control curcuit for automatic switching

ON and OFFof the mast. It shall also have suitable

controls for operation of Power Tool.

Supply, instalation, testing & commissioning of 400W non Set 2.00 5,18,034.00 10,36,068.00

integral LED flood light luminaire with pressure die cast

aluminium housing & heat resistant toughened flat

glass(IP 65) complete with external single control gear

16 MR Supply, installation, testing & commissioning of rating

Invertors 1-phase IN, 1-phase OUT complete as required

& trolley and as per following specification:

AC Voltage : 220V (-20% + 20%)

Phase : - 1-phase

Frequency : 50Hz, +/- 3Hz

AC Voltage : 230 V, ± 10%

Frequency : 50 Hz, ± 0.05%

Output Wave Form : Pure Sine Wave.

Output Wave form distortion : Less than 1%. Test report

should be provided for the same.

Transient Response : 0-100% step load, change in output

voltage is 10 V and recover back within 10 cycles.

Rated Power Factor : 0.8

Overload Capacity : 120% for 10 minutes.

: 120% for 10 minutes.

: 150% for 60 seconds.

Cooling System : Forced Air (In-built)

Battery Charger Type:

Recharge Time : Automatic boost cum float charging for

Back-up Type of Batteries : 30 minutes

Audio Alarm : Warning Buzzer for battery low.

Indications : Mains ON

Inverter OVERLOAD

AC input : SP MCB

DC fuse : Fuse in Battery Path

Output under voltage : Inverter Trips

Protection : Inverter Trips

Output overload : Current Limit

Protection : Both on Charger & Inverter

Short circuit : For Overload

Trip Facility : For Battery Low

: For Output Over Voltage

Control & User Connection:

Input through : 3 way terminal 3 core cable

Output through : 32 Amps output socket / terminal

Battery connection : 2 way terminal

Inverter ON/OFF : Rocker switch

Ambient Temperature : 0 to 50 C

Humidity : 20 to 90% non condensing

Noise Level : < 200 dB

Output capacity as follows:

Project A- Establishment of Centre (Lab) of Excellence on Nutria- Cereals at RLBCAU, Jhansi

S.No. Description of Item Unit Qty Rate Amount Ref Image

1 Reception Table nos 1,39,136

Dimension: 3000mm (L) x 900mm(D) x 1050mm(H)

Supplying and placing in position of 360 degrees revolving medium back chair of size: 660mm (L) x 490mm(D) x 1100mm(H) as per

photograph. The breathable mesh back chair with cushioned fabric seat shall be ergonomically design with adjustable lumbar back support

. The chair shall be provisioned with adjustable armrest (Up-Down) with PP padding and Adjustable Headrest(Can Adjust Movement). The

seat cushion to be upholstered on 10-12mm thick water proof plywood and moulded foam. The seat to be made with 12 mm thick hot

pressed BWR plywood (IS grade - 303) upholsetered with Polyurethane foam and mesh fabric over it. The chair shall be provided with self

tension single locking mechanism and pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm .The black Five star chrome

base with hooded nylon castors..The pneumatic height adjustment shall have adjustment stroke of 100 mm and shall be operated at 30kgs

extension force.The Seat are made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane foam, chair seat has

foam of density 32-35 kg/m3.The product should be from manufacturer(OEM) which have BIFMA COMPLIENT Certification/ INDIAN

DESIGN MARK Certification / GREEN PRO Certification/ AIOTA Certification/ BIFMA LEVEL-1 Certification/ SEDEX Certification/ GRIHA

Certification and from the approved make .The product should be as per above given specification under the guidance of Engineer in

2 Reception Chair

Supplying and placing in position of 360 degrees revolving medium back chair of size: 660mm (L) x 490mm(D) x 1100mm(H) as per

photograph. The breathable mesh back chair with cushioned fabric seat shall be ergonomically design with adjustable lumbar back support

. The chair shall be provisioned with adjustable armrest (Up-Down) with PP padding and Adjustable Headrest(Can Adjust Movement). The

seat cushion to be upholstered on 10-12mm thick water proof plywood and moulded foam. The seat to be made with 12 mm thick hot

pressed BWR plywood (IS grade - 303) upholsetered with Polyurethane foam and mesh fabric over it. The chair shall be provided with self

tension single locking mechanism and pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm .The black Five star chrome

base with hooded nylon castors..The pneumatic height adjustment shall have adjustment stroke of 100 mm and shall be operated at 30kgs

extension force.The Seat are made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane foam, chair seat has

foam of density 32-35 kg/m3.The product should be from manufacturer(OEM) which have BIFMA COMPLIENT Certification/ INDIAN

DESIGN MARK Certification / GREEN PRO Certification/ AIOTA Certification/ BIFMA LEVEL-1 Certification/ SEDEX Certification/ GRIHA

Certification and from the approved make.The product should be as per above given specification under the guidance of Engineer in

3 Sofa for Entrance lobby/ Student Common room/Staff Common room

3 seater Dimension(W)1650mm X (D)750mm X (H)710mm

Supplying, and placing in position of sofa as per Image.A supple premium Leatherette upholstery adds class to the soft

cushioned backrest and seating. Sitting proudly on sleek steel legs the sofa exudes a sense of comfort that is perfect for any

space. Material & subtype:Premium Leatherette, Seating Height:16.14" ,Legs:Stainless Steel, Finish:Matte, Size:Compact,

Style:Modern, steam beech solid wood have used for framing construction of sofa .The seat cushion is made of multi layered foam of

density 32-35 kg/m3. The seating cushion have 2.75 & 1.75 inches of elastic webbing. The thread used is nylon bonded to provide lasting nos 2 52,500 1,05,000

stitch strength . The backrest has a foam of 28kg/m3 with polyster polyfill outer layer of 200 gsm. The polyster polyfill keeps the upholstery

wrinke free & soft.The product should be from manufacturer(OEM) which have BIFMA COMPLIENT Certification/ INDIAN DESIGN MARK

Certification / GREEN PRO Certification/ AIOTA Certification/ BIFMA LEVEL-1 Certification/ SEDEX Certification/ GRIHA Certification and

from the approved make .The product should be as per above given specification under the guidance of Engineer in charge.

4 Sofa for Entrance lobby/ Student Common room/Staff Common room 0

SOFA TWO SEATER. Providing, fixing and Placing of Sofa of size 48x30x30 inch. (approx) as per indicative image. The Sofa have out

frame made out of 2nd Class Teak Wood in required shape. Legs and arms to made of 2nd Class Teak wood as per approved design.

wooden structure of sofa to be fabricated using good quality hard wood duly season & applying anti-termite treatment with paint and polish

to ensure stability of the frame. On wooden base frame of the sofa to be provided with M.S. helical spring, sides & back with jute strips

(Newar) 75mm wide, with polyfill covered with jute and finished with thick markin cloth before doing final upholstery.Seat - 40 Kg/cum

density PU Foam, 100mm thick . All exposed teak wood shall be duly melamine polished . Sofa to be pholstered using approved leatherite

of A grade (0.8mm thick) of approved shade. The work should be complete as per Indicative image, approved samples/shop drawings,

specifications and direction of client/Engineer - In - Charge.

Digitally signed by ARTI

S.No. Description of Item Unit Qty Rate Amount Ref Image

5 Revolving Chair with High Back

High Back Revolving Chair - Providing and fixing High Back Mesh Chair with Headrest- SPECIFICATIONS: Back Height -

High Back with Headrest,Back Finish - Mesh with Lumbar Support,Back Mesh Color - Black,Seat Finish - Fabric,Seat

Fabric Color - Black,Seat Height Adjustment - Pneumatic,Mechanism Type - Synchronized Tilt,Back Tilt Lock - Upright

Position,Back Tilt Tension - Adjustable,Armrests Type - Fixed arms,Base Type - 5-Star in Black nylon base. The work 4 8,450 33,800

should be complete as per Indicative image, approved samples/shop drawings, specifications and direction of

client/Engineer - In - Charge

6 Visitor Chair

Supplying and placing in position similar to 360 degrees revolving medium back chair . The Craze chair of Size :-(W)590mm X (D)505mm

X (H)1005mm - 1115mm. The chair shall be ergonomically design contour lumbar back design made of 12mm thick BWR plywood (IS

Grade - 303 for seat and back) upholstered with leatheritte and cut foam. The leatherette upholstery in the chair has the look and feel of

top grain leather. The chrome plated loop armrest with padded upholstery is provided for extra comfort. The chair shall be provided with

pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm . Five star chrome base with nylon castors . Chair seat has foam

of density 30-35 (+/-2kg /m3) The backrest has a foam of 28kg/m3. The product should be from manufacturer(OEM) which have BIFMA

COMPLIENT Certification/ INDIAN DESIGN MARK Certification / GREEN PRO Certification/ AIOTA Certification/ BIFMA LEVEL-1

Certification/ SEDEX Certification/ GRIHA Certification and from the approved make.The product should be as per above given

specification under the guidance of Engineer in charge.

7 Meeting Visitor Chair for office

Medium back 360°-degree revolving chair as per image. all over size is: 600mm(l)x 660mm(d)x 1050mm(h), the chair made of full

upholstery in black colour.it will comes in finish in contemporary style. arms: armrest is having two adjustment heights (up & down). use of

ply: 12 mm thick hot pressed bwr plywood (is grade - 303 for seat and back). seat: 40 ± 2 mm thick polyurethane foam with density 32 (±3)

kg per cu meter for best quality cushioning in seat, back: 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best

quality cushioning in back. backrest support foam design based on symmetrical lumbar support mechanism: self-weighted multi locking

mechanism. only seat size is 480mm(l) x 500mm(d) & the back size is 460mm(l)x 510mm(h)seat maximum height is 550mm & minimum nos 4 11,200 44,800

height is 450mm & back height from floor maximum height is 1050mm & minimum height is 950mm. gas lift 100 mm telescopic haudraulic

base: 650 mm chrome base with smooth castors.The product should be from manufacturer(OEM) which have BIFMA COMPLIENT

Certification/ INDIAN DESIGN MARK Certification / GREEN PRO Certification/ AIOTA Certification/ BIFMA LEVEL-1 Certification/ SEDEX

Certification/ GRIHA Certification and from the approved make .The product should be as per above given specification under the

guidance of Engineer in charge.

8 Table for Smart Class room/Examination Hall

Dimension:(L) 1200mm X (D) 600mm X (H) 750mm nos 10 22,330 2,23,300

Dimension:(L) 1800mm X (D) 600mm X (H) 750mm nos 6 34,991 2,09,945

Supplying, and placing in position of table as per image/Drawing. The top/work surface shall be 25

mm thk prelaminated particle board with 2mm thk pvc edge banding with 18mm thk prelaminated particle board modesty

panel with 2mm thk pvc edge bnading. Table top supported with MS powder coated square shape leg of 50mm x 50mm

thk. with horizontal connector of size 40mm x40mm thk. to support the tabletop The product should be from

manufacturer(OEM) which have BIFMA COMPLIENT Certification/ INDIAN DESIGN MARK Certification / GREEN PRO

Certification/ AIOTA Certification/ BIFMA LEVEL-1 Certification/ SEDEX Certification/ GRIHA Certification and from the

approved make of Durian,

Godrej,HNI .The product should be as per above given specification under the guidance of Engineer in charge..

9 Chair for Smart Class room/Examination Hall

Digitally signed by ARTI

S.No. Description of Item Unit Qty Rate Amount Ref Image

Supplying, and placing in position of chair as per image. The seat frame is constructed using sleek chrome with rich black leatherette

upholstery in stark contrast on the seat cushions. The tufted design on the seat and back adds to its style making this a perfect visitors

chair.Material & subtype: Premium Leatherette, Colour & Colour Family: Black, Dimension: (W)470mm X (D)400mm X (H)890mm, Back

Type:Low Back, Base:Four Leg Metal Frame, Base Type: Fixed, Maximum Seating Height: 19.29", Finish:Matte.The product should be nos 96 7,560 7,25,760

from manufacturer(OEM) which have BIFMA COMPLIENT Certification/ INDIAN DESIGN MARK Certification / GREEN PRO Certification/

AIOTA Certification/ BIFMA LEVEL-1 Certification/ SEDEX Certification/ GRIHA Certification and from the approved make .The product

should be as per above given specification under the guidance of Engineer in charge.

10 Warden Table

Dimension:1350mm(L)x 600mm(D)x 750mm(H)

Supplying and placing in position of office desk office desk structure of rectangular shape as per image.primary work surface overall size is

1350mm(l)x 600mm(d)x 750mm(h) 25mm thick table top made of 25mm thick prelaminated particle board work surface with the exposed

edges shall be finished with 2mm thick edge binding tape of matching colour and shade with the hot melt glue . Modesty panel made of

18mm thick, wire management hole with pvc grooment on table top. Construction right side of table top is based on a fixed pedestal 3

drawers & from left side of table top is based on 18mm thk engineered wood pvc edge banding pedestal back,top,bottom & drawers are

made of 18mm thick with 1 cpu trolley made in black metal powder coated. Fixed pedestal:l:410mm(l)x 580mm(d)x 750mm(h) ,in provided

with central lock for security and handles are provided for easy of opening. Overall construction of pedestal is 18 mm along with facia of

drawers.The product should be from manufacturer(OEM) which have BIFMA COMPLIENT Certification/ INDIAN DESIGN MARK

Certification / GREEN PRO Certification/ AIOTA Certification/ BIFMA LEVEL-1 Certification/ SEDEX Certification/ GRIHA Certification and

from the approved make .The product should be as per above given specification under the guidance of Engineer in charge.

Providing and fixing chromium plated SS curtain rod having wall thickness of 1.25 mm with two chromium plated brass brackets fixed with

11 C.P. brass screws and PVC sleeves etc. wherever necessary complete : Mtr 124 723 89,652

Supplying and fixing of Main curtain for all heights / location with required width should comprise of suitable fabric of approved shade,

12 make and sample. Fabric width to be considered 1 mtr and height to be considered 2.1 mtr. Maximum fabric considerd for folding at Top Sqm 138 1,070 1,47,660

Total Amount Including GST@18% In Rs= 23,56,833

Total Amount Including GST@18% In Rs= 23,56,833

Digitally signed by ARTI