Natham Town Panchayat, Drilling of 6 Dia Borewell with Erection of 2HP submersible Motor at Natham Bus Stand Toilet in Natham Town Panchayat

Amount

CC PAVEMENT

Charges for conducting Geological survey

Drilling of 150mm dia vertical bore well in hard rock area using bore well rig including conveyance and erecting of rig and all labor charges etc

Supply and fixing of 200mm CS dia PVC casing pipe including cost of materials and all labor charges etc.,

Supply and fixing of 200mm dia. PVC Borewell cover including alll labour chages and all T&P etc.,

Supply and delivery of Water supply Materials inculding loading, unloding and transporting etc., complete

2 HP Submercible motor (Motor should give 50 LPM X 175 M head)

2 HP Panel board

4.00 sq.mm submercible cable

32mm dia ISI UPVC Pipe

2000 litres capacity HDPE tank

32 mm dia. GI Ellbow

32 mm dia. GI coupling(Heavy)

32mm Non Return Valve

Bore Cover

Bore Kitty

Erectionofpowerpumps inborewell labour charges for erection of twin packer duplex type jet pumps in borewells upto150mmdia including fixing of Suction piperegulatingvalveswithjetassemblyuptoamaximumdepthof30manddeliverypipevalvespressuregauges upto the exterior wall of pump roomand erection ofanel board consisting of TPICN sw Pitches starter,Voltmeter,Ammeter, three indicator lampscapacitorandlayingand jointing the cable sand twin earthing aspe rIE rulesetc., completeandtestingthepumpsandtrail run for10days includingsigningofcompletionof reportsas requiredbyEBauthorities and finishing thepipeholes including the foundation bolts, nuts and earth pits.

Earth work open excavation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc., as per SS 20 A. TNDSS NO: 23 & 24 VI (S2) VI,VII 9,10 with standard specifications

Plain Cement Concrete 1:4:8 Mix (one Part of cement, four Part of M- Sand and Eight Part of aggrigate) using 40 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing. Laying and curing etc., complete as per TNDSS NO : 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge. .

Supplying and erecting centering to sides and soffits including supports and strutting with necessary cross bracing for plain surface such as RCC slabs rectangular beams all beams lintels etc., centering for soffits upto 3 meter height using mild steel sheet of size 90 cm x 60 cm x 10 mm gauge with MS angles of size 25mm x 25mm x 3mm laid over silver oak (CW) joists of size 10cm x 6cm spaced upto 90cm c/c and casurina props or 10 cm to 13 cm dia spaced at 0.750 cm c/c complying with standard specifications as per TNDSS NO : 30 & 86.

Supplying and fabrication of steel and placing in position of TMT steel rods for RCC works as per design given including cost of steel and GI binding wire in all floors etc., complete complying with standard specification in TNDSS NO:97 V,VI (S6) VII (S6), VII-3.

Reinforced Cement Concrete 1:1½:3 Mix (One Part of cement, one and half Part of M- Sand and three Part of aggregate)using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing but excluding cost of reinforcement etc. Complete with std. Specifications. TNDSS NO: 30 V, VI (S3), VII-3.

Supplying and fixing of 90mm Dia DI Man Hole Cover with Frame including cost and conveyance of all materials and all labour charges etc complete

MOHAMED RASMI H