Renovation of Subdivision and Jiledari Office Of Deokali Pump canal Division Ist at irrigation Colony Rajdepur Dehati Ghazipur.

Amount

Dismantling old & damaged Brick work including all cost of material labour T&P etc complete.

Earth Work for Excavation in foundation in ordinary soil including lift up to 1.5 metre and lead up to 30 metre and including filling ,watering ,ramming of excavated earth of foundation trench and removal and disposal of surplus earth as directed by site incharge up to a distance 30 metre from the foundation trench all labours,T&P etc.complete.

Earth Work in filling upto ground level by poclain/Jcb including all cost of labour T&P etc complete.

Filling/Laying Local Sand in foundation and between ground level and plinth level including all cost of material labour T&P etc complete.

Providing & Laying C.C 1: 3: 6 (Cement, C. Sand FM not less than 3.0 & Stone Ballast size 40 to 60mm ) in foundation for VRB with all lead & lift including cost of all materials labours, T&P etc.complete

Providing & Laying RCC in 1:1.5:3 with cement,stone grit size 10mm to 20mm well graded & coarse sand FM not less than 3.0 including cost of all materials, Labours & T&P etc complete.

Centering & Shuttering for C.C. work per Sqm.including all cost of all material labour T&P etc complete.

Ist Class Brick Work with 1 : 4 Cement morter ( Coarse Sand FM not less than 3.0) with all lead & lift including cost of all materials labours, T&P etc complete.

12.5mm thick cement plaster in 1:4 CM on Brick Masonry with coarse sand FM not less than 2.0 including Cost of materials , Labours & T&P etc complete

Finishing wall with waterproof cement paint of approved make and of required shade on new wall surface two coats over one coat of cement primer after throughly brushing the surface and also including preparing the surface with whiting , putty and sand paper smooth including cost of all material ,labour,T&P etc Complete.

Providing and fixing virtified tiles 600x600 mm 9 mm thick ( light ) shade kajaria / johnson make fixing with fine sand 1;3 ( 1cement and 3 sand)for flooring.including Cost of materials , Labours & T&P etc complete.

P/L 6 mm china white glazed or of directed colour tiles of Kajaria/Johnson in wall laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry ,jointed and polishing complete, including supply of all material , labour ,T&P etc required for proper completion of work .

Cutting , Bending & Binding of Tor Steel with cost of all materials. Labours & T&P etc Complete.

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main"T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and GI Metal Ceiling Lay in plain Tegular edge Global whitecolor tiles of size 595x595 mm, and 0.5 mm thick with 8mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro staticallypolyester powder coated of thickness 60 microns(minimum), including factory painted after bending as directed byEngineer-in-chargecost of all materials. Labours & T&P etc Complete.

Providing wood work in frames of doors, windows, clerestory windowsand other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length with Teak wood including Cost of materials , Labours & T&P etc complete .

Painting two coat of superior quality of synthetic enamel paint of approved brand on new wooden surface including cost of all material labour T&P etc. required for proper completion of work.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws all complete as per direction of Engineer-in-charge with teak wood 35 mm thick shutters including Cost of materials , Labours & T&P etc complete.

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S.pressed butt hinges bright finished of required size with necessary screws teak wood 35 mm thick including Cost of materials , Labours & T&P etc complete.

Mild steel or iron work of small size and sections such as holding down bolts, hold fast, tie rods, grating ets, (when not included in and overall rates) wrought to required shape as necessary for bendingetc. Including supply of steel and its wastage including cost of bolts, nuts if required, welding, grinding and making holes as required for completion of works for fabrication of Grill/ stair case railing including Cost of materials , Labours & T&P etc complete.

Providing and fixing 300x16 mm aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete

Providing and fixing aluminium 300x10 mm tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc complete.

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc complete.

Providing and fixing stainless steel ( Grade 304) railing made of Hollowtubes, channels, plates etc., including welding, grinding, buffing, polishingand making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge etc complete. .

Wiring point for light with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting, complete with 14 SWG copper earth continuity wire,GP Box, modular type switch & ceiling rose/angle/batten holder on 3mm thick phenolic paminated backalite sheet etc complete in all respect as directed including matching colour wash etc complete.

Wiring point for two ways light with 1.5 sq. mm. F.R. PVC insulated multistrand single core copper conductor cable in PVC conduit pipe partly concealed in the wall and partly laid in slab alongwith the reinforcementbefore concreting , complete with 14 SWG copper earth continuity wire , GP Box and two number two way modular type switches & ceiling rose / angle / batten holder on 3 mm thick phanolic laminated backelite sheet etc., complete in all respect, as directed, including matching colour wash etc complete.

Wiring point for fan / fresh air fan (light duty exhaust fan) with 1.5 sq.mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit partly concealed in wall and partly laid in slabalongwith the reinforcement before concreting, completewith 14 SWG copper earth continuity wire,GP Box , modular type switch & ceiling rose on 3 mm. thick backelite sheetetc., complete in all respect including matching colour wash etc complete.

Wiring point for plug with 1.5 sq. mm.FRLSH PVCinsulated multistrand single core copper conductor cable in PVC conduit partly concealed in wall and partly laid in slab alongwith the reinforcement before concreting, complete with14 SWG copper earth continuity wire and modular type switch and socket etc., complete in all respect including matching colour wash etc complete.

Wiring point for call bell with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit partly concealed in wall and partly laid in slab alongwith the reinforcement before concreting complete with 14 SWG copper earth continuity wire GP Box and modular type bell push or 2 pin socket etc complete in all respect including matching colour wash.

Wiring point for H.P.M.V./ Sodium Vapour lamp with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit partly concealed in wall and partly laid in slab alongwith the reinforcement before concreting complete with 14 SWG copper earth continuity wire and 15 A modular type switch etc.,complete in all respect including matching colour wash.

Invertor Wiring in wiring Point for light/ Fan/ Plug with 1.5 mm Cu Wire etc complete.

Supply and wiring of submain with two number 1.5 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm diaPVCl conduit concealed in wall, with one number 14 SWG copper earth continuity wire etc., complete in all respects including matching colour wash etc. complete in all respect.

Supply and wiring of submain 2 number 4 sqmm . FRLSH PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty( 2 mm thick ) 20mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 2.5 sqmm FRLSH PVC insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects.

Supply and wiring of submain 4 number 10 sqmm . FRLSH PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty ( 2 mm thick ) 32mm dia PVC conduit along with two numbers 6 sqmm FRLSH PVC insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects.

Supply fixing and concealing of 20mm dia.2mm thick PVC conduit pipe with ISI mark embossed and with PVC acessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resin/ adhesive to make the complete piping rigid,plastering with cement sand mortar finished to level with matching colour including cost of material labour and T & P etc required for proper completion of work

Erection and testing of ceiling fan and regulator for room height upto 3.5mts. including supply of 3mm thick G.I. Pipe 19mm dia duly painted, complete in all respects.

Erection and testing exhaust fan on the existing hole with suitable size of rag bolts nuts and washers etc. complete in all respects.

Supply and fixing hexagonal/Round G.P. fan box of approved make made up of 1.0mm thick ISI Marked G.P. sheet spot weeldeed Four to Eight holes of 25.4 mm for pipe entry of the box. Holes should be semi-shuttered type with 0.5mm G.P. Sheet made upper & lower cover duly screewed fitted with 300mm round zink coted M.S Bar X 12mm & brand name should be embossed. Fixing with wiring conduit laid in the R.C.C roof before concreting alongwith supply of all material, labour, T&P etc. required for proper completion of the work.

Supply fixing of electronic fan regulator(Modular) 120-280 V. ISI marked, on the existing switch board including making connection, required material, labour T/P etc for proper completion of work to the satisfaction of Engineer in charge of work.

Supply and fixing of Ceiling fan with fan motor of AC permanent insulation, capacitor rating conforming BEE 5 star rating and IS: 374/79 and also completly with IS:1709/1984 with latest amendment. The rated voltage 220/240 volt 50Hz, 1-ph AC the fan assemble should consist of down rod blades, shackle canopies etc and with double ball breaing system BEE 5 star rated-1200 mm sweep complete.

Supply & fixing of LED Tube Light with batten suitable for up to 1 x 22 watt LED tube light complete including tube etc on surface complete in all respects.(CAT: AAA).

Supply and fixing of recess/ Surface/ Pendent mounting round 6 Watt 8 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect..(CAT: AAA).

Supply and fixing of CO2 type fire extinguisher 4.5 kg capacity (ISI MARKED IS 2878 & TAC approved ) complete with intial charge and wall bracket along with supply of all materials and labour for proper completion of work.

Supply and fixing of surface/flush mounting distribution boards with additional metal door without MCB 6 Way TPN complete in all respects.

Supply and fixing of 6Amp to 32 Amp(10 KA) MCB in existing MCB, DB complete with connections as required.

Supply fixing and making connection of following FPMCBS complete in all respects as per direction and satisfaction of engineer-in-charge.40 Amp. 4 Pole MCB Isolator.

Supply and fixing of power plug with 20A/250 V flush type modular switch and 5 Pin 20 A/250V flush type universal modular socket switch on concealed M.S. box including supply of all material, labour T&P etc. required for proper completion of work.

Supply and burying of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 2000mm, outter pipe 50m, inner pipe 25, terminal Dia 12mm, outter GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanised upto 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing (from electrode terminal to switch board, cost of 25 x 3 GI strip will be extra)

Supply and laying of 25mm x 3mm G.I. strip from earth electrode directly in the ground as required complete in all respects.

Supply and fixing of one number 8 SWG G.I wire in 15mm dia. G.I pipe for earthing laid in ground or in wall duly concealed including the cost of cement, sand, labour, T&P other material required for proper completion of the work as directed at site.

Supply and laying of aluminium conducter, PVC insulated armoured, served, sheeted cable 1000 bolts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and top on surface, the cable run shall be fixed on M.S. clamps etc. of suitable size.with 25 sqmm 3.5 core cable etc complete.

Supply & fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respects. The armouring of the cable shall be properly connected with the earth directed at site. with 25 sqmm 3.5 core cable etc complete.

Supply and fixing of Palm / pin type copper tin plated cables sockets (lugs) to the cable leads, insulating with tape and making of connections etc. complete in all respects as per direction of Engineer-Incharge

S & F of surface/flush mounting 4 ways V TPN distribution board with additional door without MCB complete in all respect, as directed at site by Engineer in charge.

S & F of 63 Amp 4P MCB (10KA) Thermal Magnetic release including Cost of materials , Labours & T&P etc complete.

S & F of 40 Amp TP MCB (10KA) C Curve including Cost of materials , Labours & T&P etc complete.

Supply and fixing erection of AC 230/250 Volts, 50 Hz exhaust fans including providing nuts, bolts, mounting frame and other accessories including connections etc. complete as required 300mm sweep complete.

Providlng and fixing white vitreous china extended wall mounting water closet of size 780x370x690mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting of flushing capacity 3 litre/ 6 litre (adjustable of4 litre/8 Iitre), including seat cover and cistern filtings nuts bolts and gasket etc complete of approved make & quality.

Provjding and fixing 8mm dia CP/SS jet wilh flexible tube uplo 1 metre long with SS triangular plate to Eureopean type WC of quality and make as approved by Engineer-in-charge.

Providing and fixing wash basin with Cl brackets,15mm CP brass pillar taps, 32mm CP brass waste of standard pattern, including painting of fitting and brackets, cutting and making good the wallswherever required.White vitreous china wash basin size 630x450mmwith a single 15 mm CP brass pillartaps..

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings etc complete.

Providing and fixjng PVC waste pipe for sink or wash basin including PVC waste fittings complete.Semirigid pipe 40 mm /32 mm dia.etc complete.

Providing and fixing 600x450mm beveled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats wiih CP bIass screws and washers complete.

Provlding and fixing white vitreous china flat back half stall urinal of size 580x380x350mm with white PVC automatic flushing cistern, with fittings, standard size CP brass flush pipe, sprcaders with unions and clamps (all in CP brass) with waste fitting as per 15:2556 Cl trap with outlet gratjng and other couplings in CP brass including painting of fitting sand cutting and making good the walls and floors wherever rquired.Range of two half stall urinals with 5 litre PVC automatic flushing cisern.etc complete.

Providing and fixing PTMT Liquid soap container 109 mm wide ,125 mm high and 112 mm distance from wall of standard shape with bracket of the same material with snap fittings of approved quality and colour weighing not less than 105 gms etc complete.

Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe.etc complete.

Provinding and fixing water closet squatting pan with 100mm sand cast iron p or s trap 10 litre low level white pvc flushing cistern including flush pipe with manually controlled device confirming to IS 7231 with all fitings and fixtures complete including cutting and making good th walls and floors wherever required etc complete.

Providing & fixing soil, waste and vent pipes 100mm dia centrifugally cast iron S & S pipe.etc complete.

Providing lead caulked joints to sand cast iron/ centrifugally cast (spun) iron pipes & fitting of 100mm diameters including Cost of materials , Labours & T&P etc complete.

Providing & fixing M.S. holder bat clamps of approved design to sand cast iron/centrifugally cast (Spun) iron S & S pipe embeded in & including cement concrete blocks 10x10x10cm. of 1:2:4 mix (1 cement : 2 coarse : 4 graded stone aggregate 20mm nominal size). Including cost of cutting holes & making good the walls etc for 100mm dia pipe including Cost of materials , Labours & T&P etc complete.

Providing & fixing cast iron trap of self cleansing design with or without vent arm complete, including cost of cutting & making good the walls & floors.100mm inlet & 100 mm outlet including Cost of materials , Labours & T&P etc complete.

Providing & fixing cast iron coller.of 100mm dia including Cost of materials , Labours & T&P etc complete.

Providing and fixing plain cast iron S & S sanitary bend.of 100 mm dia including Cost of materials , Labours & T&P etc complete.

Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete of 100 mm dia including Cost of materials , Labours & T&P etc complete.

Providing and fixing centrifugaly cast iron single equal plain junction of required degree 100x100x100mm including Cost of materials , Labours & T&P etc complete.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion . (i) Single socketed pipes of 110mm diameter including Cost of materials , Labours & T&P etc complete.

Making khurras 45x45cm with average minimum thickness of 5cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20mm nominal size) over PVC sheet 1m x 1 m x 400 micron, finished with 12mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, punning, rounding the edges and making and finishing the outlet complete of 110mm dia.

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.of 110 mm dia.

Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15cm diameter and weighing not less than 440 grams.

Providing and fixing 32 mm dia chlorinated polyvinyl chloride(CPVC) pipes, having thermal stability for hot & cold water supply, including all CpVC plain & brassthreaded fittings i/c fixng the pipe with clamps at1.00 m spacing. This includes jointing of pipes &fitting with one step CPVC solvent cement and thecost of cutting chases and making good the sameincluding testing of joints complete as per directionof Engineer in charge. concealed work, includingcutting chases and making good the walls etc.

Providing and fixing 15 mm dia chlorinated polyvinyl chloride(CPVC) pipes, having thermal stability for hot & cold water supply, including all CpVC plain & brassthreaded fittings i/c fixing the pipe with clamps at1.00 m spacing. This includes jointing of pipes &fitting with one step CPVC solvent cement and thecost of cutting chases and making good the sameincluding testing of joints complete as per directionof Engineer in charge. concealed work, includingcutting chases and making good the walls etc.

Providing and fixing C.P. brass bib cock of approved qualily conforming to lS:8931.15mm nominal bore including Cost of materials , Labours & T&P etc complete.

Providing and fixlng C P. Brass long nose bib cock of approved quality conforming to lS standards andweighing not less than 810 gms.15mm nominal bore

Providing and fixing C.P. Brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.15mm nominal bore including Cost of materials , Labours & T&P etc complete.

Providing and fixrng CP. brass angle valve for basin mixer and geyser point of approved quality conforming to lS:8931 15mm nominal bore including Cost of materials , Labours & T&P etc complete..

Providing and placing on terrace (at all floor levels) Polyethylene water storage tank, 1S.12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overeflow pipes but withoul fittings and the base support for tank.Circular Tank including Cost of materials , Labours & T&P etc complete.

M/S GEETA CONSTRUCTION

M/S OM PRAKASH PANDEY