REPAIR/ROUTINE MAINTENENCE OF LIFTS IN BUILDING, VANDANA, VISHAKHA, ADITI AHILYA AND BHAGIRATHI AT OUTLAYING AREA AND REPAIR, ROUTINE MAINTENACE OF LIFTS AT BUILDING ARCHANA, ANURADHA CHITRA KANYA ANNEX TRANSIT AT WNC J under GE NOFRA

Repair/maintenance of lifts including carrying out daily check and periodical services of fully automatic electrical lift with power operated door, simplex collective control system with repair/maintenance of unserviceable damaged parts such as bearings, bushes, all type of guide shoes, headers, hangers, door ropes,door cards,car door sills, landing door cills, door locks, cabin lights, minor repair of cabin fan,control cards, and its contacts, hall push buttons and its spares, connector/links, welding of cracked /broken and MS parts,door safety edge and sensor mechanical safety lock, magnetic lock or contact, car position indicator, and all connected accessories, necessary wiring of hall push button assembly, repair/maintenance of broken COP/LOP buttons and display, including cover, Fire alarm, Firemen button glass, Intercom, alarm/hooters, damaged hand rail, Shaft, light/switches, complete with illuminated push button and direction indicator with LED display with LPT/LPC card of stainless steel inclusive of harness wiring for laminating of push butt

(b) Buildings :- Vishaka,Vandana and Bhagirathi (03 Nos lift), Make: Exsiting make at Bldg .

Ditto All as per item No 1.00 above here in before but 08 PS lift (544 Kgs) inbuilding .

(a) Aditi and Ahilya building (G+12 upper floor) ,( 2 Nos) lift Make: Exsiting make at Bldg .

(b) building Vishwakarma (G+7 upper floor), (01 No) lift Make: Exsiting make at Bldg .

(c) building Wnc mess Annex (G+6 upper floor) 02 No lift Make: Exsiting make at Bldg .

(d) building Dhanishta and Jyeshta (G+16 upper floor) (02 Nos) lift Make: Exsiting make at Bldg .

(a) building Archana (G+15 upper floor), (02 Nos) lift Make: Exsiting make at Bldg .

on of each floors and cutting wall making good disturbed surface with masonry work to make with existing surface & cable as per requirement and ensure smooth and safe operation of lifts , fixing of loose rail bracket with necessary masonry work , changing of broken anti skid pvc rubber mat and air freshner at lift cabin, removing old paint by paint removers and cleaning with scrappers, any number of coats, steel surfaces and lift machine and all equipment held in machine room and rust painting at car top and door and allied parts , two coats of painting of gear motor, all MS channels and Control Panels using spray gun ensure safe and smooth functioning of lift and complete maint of car top, binding of loose wire at control panel and , dewatering of lift wells in case of any emergency arise complete all as specified and directed.

(b) building Dhanishta and Jyeshta (G+16 upper floor), (02 Nos lift) Make: Exsiting make at Bldg .

(c ) building Transit Building WNC Mess (G+6 upper floor), (01 No) lift Make: Exsiting make at Bldg .

(a) building Anuradha, Chithra (G+14upper floor), (02 Nos) lift Make: Exsiting make at Bldg .

Ditto All as per item No 1.00 above here in before but13 PS lift (844 Kgs) in building :

(b ) building Kanya (G+13 upper floor), (01 No) lift Make: Exsiting make at Bldg .

(c) building Transit WNC Mess (G+6 upper floor), (01 No lift) Make: Exsiting make at Bldg .

(d) building Viswakarma (G+7floor) (01 No) lift, Make: Exsiting make at Bldg .

Ditto All as per item No 1.00 above here in before but 1000 Kg goods lift in building : Note :- for Item No 01 to 4.04, (i) The Contractor has to carry out the AMC of the Lifts through OEM only. (ii) The AMC should cover any / all parts of Lifts if its functions found defective the same should be repaired or replaced by the OEM as per the timeline covered under norms. (iii) One mechanic shall be available round the clock at lift complaint cell for safe & smooth functioning of the lift. (iv) Rewinding of motor if required will be done by the contractor and no extra cost will be given by the department. (v) The detailed lift mechanics shall sign (Their shift wise) in the attendance register kept with lift cell. If he is found absent of move without intimating to incharge of lift cell of JE EM, he will be treated as absent for this said shift recovery to this effect for Rs 1500/- per shift shall be affected. (vi) Cost of minor spare parts/ routine material required for above mentioned maintenance is deemed to be included in the quoted rate except items mentioned here-in-after. No additional cost of spares is admissible for the above maintenance. Decision of the Accepting Officer shall be final & binding regarding minor spares/ routine material. (vii) Monthly schedule for proper maintenance of lift and necessary documentation including all spares parts required to be replaced during the period shall be as directed . (viii) All minor spare parts and parts required for repair/ replacement for maintenance of lifts to be replaced during AMC at no extra payment.

Taking down old unserviceable main steel wire rope after disconnecting old wire rope from counter weight, pulley and car cabin and supply and fix new governor steel wire rope 8 mm dia, ungalvanised, 8/19 construction in and including necessary connection with counter weight pully and car cabin with clamps,nuts, bolts and washer etc complete all as specified and directed.

Taking down old unserviceable main steel wire rope after disconnecting old wire rope from counter weight, pulley and car cabin and supply and fix new main steel wire rope 13 mm dia, ungalvanised, 8/19 construction in and including necessary connection with counter weight, pulley and car cabin with clamps, nut, bolts and washers etc complete all as specified and directed.

Dismantling and taking out unserviceable travelling cable from hoistway & supply and fixing new travelling cable PVC insulated 12 Core flat/ round type with standared copper conductor,1100 Volt of size 0.75 Sqmm conforming to relavent IS in and including thimbles, suspended type freely move with car cabin up and down movement between ground and upper floors including necessary proper connection with mid way junction and other connection required in circuit complete all as specified and as directed.

Taking down broken granite slab and material an labour for black granite slab, machine cut, set on vertical surfaces allround with lift facial elevation including back casting cement mortar (1:3) 15 mm thick and joint filling with white cement with pigment to match with shade of granite for lift archive at all floors as specified and directed.