CANOPY FOR WZ

Goa Supp & Trans,Fab — pplying,transporting,fabricating,erecting in position in position ofPre-fabricated steel structures at all elevations for Canopyusin tructural steel sections ISMB/ISMC/ISA conforming to IS 2062 and IS 226,including cutting,welding or bolting,supply of bolts,nuts,wa ers etc complete as per drawings including surfacepreparation andapplying one coat of Zinc Phosphate Primer beforeerection one coat ter erection and two coats of synthetic enamel paintas perspecification after erection and all materials and labour complete.(No wel ng is permitted at site). The rate quoted shall include cost of bolts,nuts,washers,welding and electrodes and any other consumables quired for completing the work. Nut bolts shall not beconsidered forpayment. Theoretical wight of steel sections shall beconsidered r payment.(No measurement shall be taken for nut,bolt,washer spliceplate and gusset plate)

Goa Clippon Roofing — pply and fixing Clippon Roofing System:Roofing base material should beof cold rolled steel of 0.55 mm thick and conform to ASTM:A446 avingyield stress of 275 MPA.The coating should be Aluminum and Zinc alloycomprising 55% Al,43.5 Zinc and 1.5% Silicon,as per ASTM:A 2. Thecoating mass should not be less than 150 Gms per SqM (total of bothsides).For,bare galvalume,TCT should not be less than 0.55m Sheetsshall have approved side laps with top sheets facing away from theprevailing weather. Necessary profiled filler box should be rovided athigher level of roof sheeting and at valley gutter to ensure watertightness in the profiled gaps. The fixing of roofing sh l be done insuch a manner that the roof is not drilled/punctured for fixing with thepurlins.Refer to the approved makes given in the ttachment. Flashings,Cappings and trims:These shall be formed out of same substrates as that of the roofing sheets and shall be supp ed in standardlengths of 2.5 M in the required shapes and girths and fixed by means ofhex-head mechanically galvanized stitching scr s. Silicon sealantnon-hardening neutral cure type shall be applied at all laps to avoidwater seepage.

Goa False ceiling — oviding and fixing false ceiling system of Trac 150 F exterior gradeor approved equivalent of 0.5mm thick galvanised steel with stov nameled coil coated finish inter locking ceiling panels,carriers,suspension system and edge closure as per the following specificati .Supplying and installation of exterior grade 150 F ceiling systemcomprising of 150mm x 17mm deep panels roll formed out of 0.5mmgal nised steel with stove enameled coil coated finish. The panelsshall be pre-treated and coil coated on one side in manufacturersstand d colour shades as approved by the Architect/Engineer in charge.The rear side of the panel shall be given a coat of primer and a was oat while the finished side shall be given a coat of primer and finishcolour coat in polyster paint for admin. dry film thickness of 0microns,fixed on to the roll formed carriers 34.5mm x 488mm deep out of6mm thick Galvanised steed with prongs to hold panels in the odule of150 mm at maximum 1.2 mts,C/C. The carriers to be suspended from rooftruss by rigid suspension angles as per manufacturer's commendation.Panels shall be supplied in custom length upto maximum of 5 mts. Jobalso includes providing ceiling flashing using fact y formed 0.5 mmthick Polyster coated galvanised steel material. Rate shall be includingproviding flashing to cover gap if any betwee illuminated banding andfalse ceiling

Goa GI Facia (20 SWS) — pplying and fixing 20 SWG GI sheet facia including painting with onecoat of zinc chromate primer and two coats of 1 st quality synth icenamel paint on front side. Necessary facia framework for fastening thesheet to the canopy securely shall be paid separately

Goa AL Gutter (2mm Thick) — oviding and fixing 2mm thick Aluminum Sheet Gutters of required shapein slope with 40mm x 3mm MS. Brackets at 1000mm maximum spacing nd 8mmdia G.I. J or L hooks,boltsand nuts,GI Limpet and bitumen washers,providing nut bolt joint,sealing the joints with silicon sea nt testingthe gutter for leakage by filling water etc.Complete.(Refer attachedDrawing For allowable tolerance refer to IS codes)

Goa 6" PVC Pipe — oviding and fixing 6 inch dia PVC pipes of 6 Kg/sqcm of approved Makeas per IS 4985 for rain water pipes including all fittings like ands,shoes etc. MS fabricated bracket as per requiment etc. All complete as directed by the EIC.

Goa 80 W LED Light Fixture — W LED Fitting as mentioned in IS standards IS 16101 to 16107:Supplyand fixing of 80 W LED housed by Single piece Pressure Die Cast uminumbody,recess mountable fitting with guaranteed burning hours of50000. Make Philips/Havells/Bajaj/Wipr Osram/Crompton/GE/BeverInnovatio ns. IP Protection of minimum IP 65 and above,suitable forcanopy lighting at retail outlets (Petrol ation).The bidder shouldsubmit copy of certified photometric report as per IESNA LM-79(Approvedmethod for the Electrical and Photome ic Measurements of Solid-StateLighting Products) from a UL/ERTL/ERDA or any NABL accredited laboratoryto validate the photometric cl ms as and when asked by HPC. A minimum3years warranty from manufacturing defects for the luminaire bymanufacturer. i)W h high lumen efficacy LEDs from CREE,Seoul Semi 2)Conductor,Lumiled Philips,Osram,Nichia(Japan),Tridonic(Austria),GEand Bridgelux.E iciency of more than 90 lumens per watt.LEDs used inthe fixture should be from the same bin and certified as per LM-80 (IESNA: Appro d Method for Measuring Lumen Maintenance of LED LightSources and LED lumen depreciation time to L70 based on LM-80 data)byany UL/ ER /ERDA or any NABL accredited laboratory to validate thephotometric claims and when asked by HPC. ii)Bottom open able for easymainte nce. iii)High Quality Polycarbonate Opal Diffuser for Optimumuniformity and Glare free ligh output. iv)General electrical protectionagainst High Voltage and Surges up to 3KV v)Power factor should be greater than 0.95 vi) Range allowed for total system wattage 80 W with Pl 2W or Minus 2W vii)DriverOperating Voltage Range:140 V- 270V viii)Operating Temperature 0 to +45Deg Centigrade viii)CRI more than 70 ix)Colour temperature 5650K± 500K(tobe mentioned in LM 79 cer ficate) x)Wide beam angle for spread of light120 degrees or more xi)Luminaire Performance Complies to IS1 22 (Part5/Sec 3)and IEC 60598- 1,IEC 60529,ROHS.

Goa 4C X 2.5 SQMM Copper — pply and laying following size PVC insulated,sheathed,armoured cableof approved make conforming to IS 1554:Part 1:1988 4CX2.5 SQMM C PERCABLE

Goa 4CX2.5 SqMM End — D TERMINATION End termination of following cable withdouble compression NFLP gland and crimping sockets 4CX2.5SQMM END TERMINATION

Goa 4" PVC Pipe — oviding and fixing 4 inch dia PVC pipes of 6 Kg/sqcm of approved Makeas per IS 4985 for rain water pipes including all fittings like ands,shoes etc. MS fabricated bracket as per requiment etc. All complete asdirected by the EIC.