CA NO. GE(W)/HSR-55/2025-26 PROVN OF GD ROOM AT TCP-1 AND CERTAIN REVENUE WORK AT HISAR MIL STN UNDER GE (W) HISAR

Surface dressing not exceeding 15 cm deep and getting out in soft/loose soil complete as specified and directed.

Surface Excavation not exceeding 30 cm deep and average 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

Removing surplus spoil to a distance not exceeding 50m and deposited where directed at a level exceeding 1.50m from the starting point complete as specified and directed.

Removing surplus spoil to a distance exc 1.5 km but n exc 5 km and deposited where directed at a level exceeding 1.50m from the starting point complete as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out getting out in soft/ loose soil complete as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm. In excavated area and in floor area fill the ground floor area upto top of plinth beam complete as specified and directed.

M&L for hard core of gauge exc 63mm but n exc 100 mm broken bricks deposited and spread and levelled in layers nexc 15cm tick watered and rammed to a true surface complete all as specified and directed.

M&L for PCC 1:4:8 type D2 using 40mm graded stone graded aggregate as in foundation, sub base of flooring/ hard standing complete as specified and directed.

M &L for PCC 1:2:4 type B1 as in coping surface channels, benchings etc of manholes finished fair and even complete all as specified and directed.

M &L for precast manhole covers with plain faces using RCC 1:2:4 type B1 and set in CM 1:4 including formwork complete all as specified and directed.

M & L for Plain Cement concrete Type B 0 1:2:4 (12.5 mm graded stone aggregate) as in ,shed pole filling ,copings, bed to drain and mass concrete complete all as specified and directed.

M&L for cement concrete type B-1 1:2:4 (using 20 mm graded stone aggregates) in coping and simimlar articles with plain faces etc set in cement mortar 1:4 complete all as specified and directed.

M&L precast concrete solid block kerb stone of required size factory made of PCC 1:2:4 type B1 using 20mm graded stone aggregate and including weathering of chamfered angles etc and setting in cement mortar 1:4 complete all as specified and directed.

M&L for providing cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in roof kerbs, Roof padding complete all as specified and directed.

M&L for 25mm thick (1:2:4) Type-B-0 (using 12.5mm graded crushed stone aggregate) as levelling course on roof and complete all as specified and directed.

M&L for 50mm thick cement concrete type C1 (1:3:6) as in plinth protection finishing the surface even and smooth without using extra cement complete all as specified and directed.

Material and labour for plain cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate, 75mm thick as in sub base complete all as specified and directed.

M&L formwork to sides of concrete foundation footing, bases of columns & plinth beams complete as specified and directed.

M&L formwork to sides and soffits of floors & roof beams, beam haunchings, girders etc complete as specified and directed.

M&L formwork to sides of pillars, posts, struts, columns & stanchiours etc complete as specified and directed.

M&L formwork to soffit of suspended slabs,such as roof slabs, floor slabs,landing and simillar work n.exc 200mm thick (Horizontal/Sloping) complete as specified and directed.

M&L RCC nominal mix type B1 1:2:4 (20mm graded aggregate) as in columns pillars and struts etc complete as specified and directed.

M&L RCC nominal mix type B1 1:2:4 (20mm graded aggregate) as in foundations, including, footings, rafts, plinth beams and mass concrete complete as specified and directed.

M&L nominal mix type B1 1:2:4 (20mm graded aggregate) as in beam, contilevers, lintels over 1:5m span complete as specified and directed.

M&L nominal mix type B1 1:2:4 (20mm graded aggregate) as in slab complete as specified and directed.

M&L nominal mix type B1 1:2:4 (20mm graded aggregate) as in Chajjah complete as specified and directed.

M&L RCC 1:2:4 Type-B1 (20mm graded aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including necessary forms works complete all as specified and directed.

S&F TMT bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with MS wire (annealed not less than 0.9mm dia) complete as specified and directed.

Description all as per item No 28.00 above but 6mm to 8mm dia complete as specified and directed.

M&L brick work with sub class 'B' bricks straight or curved in plan exc 6 mtr mean radius built in CM (1:4) using old size bricks complete all as specified and directed.

Dismantling of brick work built in cement mortar complete all as specified and directed.

M&L brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as specified and directed.

M&L for brick work with fly ash Bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 complete all as specified and directed.

M&L, 15mm thick rendering in CM 1:6 to brick/concrete wall surfaces trowelled to even & smooth without using extra cement complete all as specified and directed.

M&L for rendering 10mm thick in CM 1:3 as in ceiling/landing etc on concrete surface finish even and smooth without using extra cement complete all as specified and directed.

M&L rendering 15 mm thick in CM 1:4 with and mixing of liquid WPC of approved make @ 200ml per bag of cement / manufacturer's instructions on brick/concrete wall surfaces of any description, and finishing the surfaces even and fair complete complete all as specified and directed. Note:- WPC shall be measured and paid separately

M&L for preparation of new plastered surfeces and applying two coats of exterior emulsion paint of make : weather coat of Berger / apex utima of Asian paints / Xtrapremium of Shalimar , over and incl of a coat of exterior wall primer over 3mm thick acryllic wall care putty as approved by Manufacture complete all as specified and directed.

Supply and Apply a pre Batched one component polymer modified cementitious patch repair mortar for a thickness of 20 mm or complete all as specified and directed. Product Yield: Approx : 0.84 ltr/Kg System Requirments: compressive strength >=50 N/mm2 (28 days) according to ASTM C 109 ;flexural >= 3 N/mm2 (7 days) according to ASTM C 293-79 Note: contractor shall submit the guarantee certificate of efflorescence for 5 years from date of completion of work.

M&L for applying 2mm thick wall care putty on walls and ceiling including filling cracks or holes complete all as specified and directed.

M & L two coat of oil bound distemper on new plastered surfaces of walls and ceiling including preparation of surfaces complete all as specified and directed.

Providing and fixing ,factory made 100% solid WPC (wood polymer composite)- door frame of size 50mmx75mm made from wood polymer composite (single extruded process) material comprising of virgin PVC polymer of K value 57-60 (suspensive Grade), calcium carbonate and natural fibers (wood powder/rice Husk/wheat husk) and non toxic additivies fabricated with meter joints after applying PVC solvent cement & screwed with full body threaded star headed screws having minium frame density of 780Kg/cbm manufacture by and ISO 9001-2015 certified company, having good screw holding capacity (Screw withdrawel strength of (Min 990N/mm, minimum copressive strength of 58N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof,water/moisture proof & fire retardent & fixed in position with SS draft fasteners/hold fast of required dia and length for external uses complete all as specified and directed.

providing and fixing , 30mm thick factory made 100% solid WPC (wood polymer composite) solid plain/prelam/enrouted plain/enrouted painted flush door shutter of required size comprising of virgin PVC resin of K value 57-60(suspension grade) calclum carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives made from Extrusion process WPC foam sheet single extruded (inner) with density not less than 650 kg/cbm manufacture by an ISO 9001-2015 certificate company, having good screw holding capcity (screw withdrawl strength of 2000 n (face) and 1100 N (edge) minimum copmressive strength of 50 n/mm2, Modulus of elasticity 850/N/mm2 and resistance of spread flame of class A category with property of being termite/borer free, water/moisture proof, fire retardant and fixing with stainless steel butt hinges of 100m size: 3 Nos , Handle 150mm : 2 Nos , Tower Bolt 200mm : 2 Nos , sliding door bolt 200mm :1 Nos with necessary full body threaded star headed counter sunk SS screws for WC/bathroom/toilet/Kitchen/Balcony doors complete all as specified and directed.

M & L Pressed steel frames (section 125 x 60mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed.

M&L 30mm Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

M&L Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc. complete all as specified and directed.

M&L non skid ceramic tiles coloured pattern as required of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15mm thick screed bed in CM (1:4) compete all as specified and directed.

M&L non skid ceramic tiles coloured pattern as required of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15mm thick screed bed in CM (1:4) compete all as specified and directed.

Description all as per item No 49.00 above but on skirting over with and including 10mm thick backing coat of tile adhesive of approve make complete all as specified and directed.

M&L glazed ceramic coloured, designer & pattern (dark & light shade combination) tiles in 450 x 300 x 7-8 mm thick wit h3-5 mm spacer on vertical surfaces such as dado etc set and jointed in neat cement slurry and pointed in white or colour cement to match over with and including 10mm thick backing coat in CM 1:3 and d complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing); and removal complete all as specified and directed.

M&L for coloured glazed ceramic tiles of size 300 x 600 mm thick as in vertical surface in light and dark shade combination set and jointed in neat cement slurry with 3-5 mm tiling Spacer tool and pointed flush with white or coloured Epoxy to match ,over and including 10mm thick baking coat in CM 1:3 complete all as specified and directed.

M&L for coloured digital vitrified tiles 10mm thick (square/rectangular) of size 600mm x 1200 mm in floors etc set & including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

M&L 16-18mm Granite (of any type ) work (table rubbed and polished ) in steps , jambs , pillars , window -cills ,cooking plateforms and like in cement mortar (1:4) including pointig in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including provision of screed bed 20mm thick in CM 1 :4 including demolition of old existing stones and complete all as specified and directed.

Rounding to edges of stone edges such as in steps/ cooking platform and other similar situations complete all as specified and directed.

M&L Screed bed or bedding layer of mortar 15mm thick in cement mortar 1:3 and finishing even and smooth with mixing of liquid WPC @200 ml per bag of cement on roof surfaces complete all as specified and directed. Note : WPC shall be measured and paid seperately.

M&L 20mm thick granite stone slabs over and including 15 mm thick screed layer in CM 1:3, laid and jointed with grey cement slurry mixed with pigment to match the shade of stone including rubbing & polishing complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

M&L for applying roof treatment on top of roof with APP modified membrane (minimum 3mm thick) weighing not less than 3.50Kg per Sqm, consisting of 90 micron center core HMHDPE (High molecular high density polyethylence) laid by torch application method of overlap 100 on length and 100mm on the width side as per manufacture's instructions over a coat of hot air blown grade bitumen 85/25 @ 1.20Kg/Sqm over a coat of approved cold applied bituminous oil based primer (IS-3384) @ 300 gm/sqm complete and applying two coats of aluminium paint over APP membrane complete all as specified and directed.

S&F rotational moulded polythene water storage tank 1000 ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I with and including 20mm bore dia ball Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) and 20mm bore dia nipple suitable (02 Nos) for HDPE water tank (Min weight 15mm-38 gms/20mm-45gms/25mm-65gms)fixed complete all as specified and directed.

S&F Vitreous china counter top oval shape wash basin of size 560 x 410mm size, incl cutting hole in slab and granite for basin and fixing the same and making good and including of fixing and supply and waste pipe,32mm PTMT waste coupling,450mm long PVC connection complete all as specified and directed.

S&F EWC pedastal pattern water closet with P or S trap including flushing cistren complete all as specified and as directed.

S&F Glass soap dispenser including hanging on wall complete all as specified and directed.

S & F Auto closing system CP Pillar taps 15 mm dia long size, cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe 15mm bore complete all as specified and directed.

Supply and fixed Vitreous China half stall type urinal including urinal spreader white (including flush pipe and waste pipe,pvc connections) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing , flush pipe, grating and Union for discharge pipe.

S&F Vitreous China Urinal partition white of Size 310 x 700 mm complete all as specified and directed.

S&F 15 mm dia Stop valves / gate valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F 20 mm dia Stop valves / gate valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F CP soap dish fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F CP peg set 6. complete all as specified and directed.

S&F for towel rail 600 mm long of CP fixed with and incl Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190 gms) complete all as specified and directed.

S&F single/multi PVC (SWR) floor trap 75mm dia, palin with grating including joining to waster pipe, fixed in cement concrete type B-1 (1:2:4) using 20mm graded broken stone aggregate complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls & floors with necessary MS clamps complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls & floors with necessary MS clamps complete all as specified and directed.

S&F 110 mm PVC (SWR) access door bends any radius complete all as specified and directed.

S&F 75 mm PVC (SWR) access door bends any radius complete all as specified and directed.

S&F 110mm PVC (SWR) junction single,(Single T) equal or unequal provided with access door complete all as specified and directed.

S&F 75mm PVC (SWR) junction single,(Single T) equal or unequal provided with access door complete all as specified and directed.

S&F 110mm PVC PVC (SWR) vent cowl complete all as specified and directed.

S&F 75mm PVC PVC (SWR) vent cowl complete all as specified and directed.

Roof trusses (framed), steel ,trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. of grade Fe-410 or E-250® ,bolts and complete steel items reqd in shed work excpet corrugated CGI sheet and complete all as specified and directed.

M & L of preparation of new painted surfaces of Steel over 10 cm girth or width, and applying two coat of synthetic enamel paint complete all as specified and directed.

M & L of preparation of new wooden surfaces over 10 cm girth or width, and applying two coat of synthetic enamel paint over and including one coat of pink primer complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Supply and fixed rubber moulded coloured 60 mm thick machine pressed precast interlocking paver block of any size and shape confirming to IS 15658-2006 of Grade M-35 of pigment placed over sand cushioning made up with 12.5mm graded mechanicaly crushed stone aggregate, factory made of any tint, over and including sand cushioning of 25mm thick for spreading, levelling & filling the joints complete all as specified and directed.

Supply and fixed rubber moulded coloured 80 mm thick machine pressed precast interlocking paver block of any size and shape confirming to IS 15658-2006 of Grade M-40 of pigment placed over sand cushioning made up with 12.5mm graded mechanicaly crushed stone aggregate, factory made of any tint, over and and including sand cushioning of 25mm thick for spreading, levelling & filling the joints complete all as specified and directed.

M&L for two coats of synthetic enamel paint on stone/concrete/bricks surfaces including preparation of new surfaces of any description, over 10 cm in width or girth not otherwise described complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate for 150 mm dia bore drain pipe for bed concrete including packing under and hunching against the sides of pipe after they are laid and tested complete all as specified and directed.

M&L 150 mm Reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed.

Cutting is to existing manholes for new drains, for removing existing branch drain, making good to walling and rendering cutting out branch channel and making good benching (bore of pipe 150 mm) complete all as specified and directed.

Taking down chowkats or frame with shutter, without taking off shutter from the frames area exc 1.5 sqm but not exc 4sqm each complete all as specified and directed.

Taking down chowkats or frame without taking off shutters(with or without glazing and ventilator) not exc 1.5 Sqm each complete all as specified and directed.

M & L for 12 mm thick frosted toughned glass door for bathrooms of required size including creating a design and pattern on full portion of toughened glass as per user requirement including locking arrangement, premium large size handles: 2 nos on each door , and all necessary fittings for fixing/ functioning of the door complete all as specified and directed.

S&F for 5.5 mm thick dark coloured glass for doors Iincluding black film for making glass opaque and windows/ frosted dark coloured glass for ventilators in aluminium door windows and ventilators partitions including ped/gasket complete all as specified and directed.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed to powder coated windows and doors complete all as specified and directed.

S&F powder coated aluminium deco grill fixed to powder coated windows and doors complete all as specified and directed.

M&L Aluminium die cast body door closer hydraulically regulated, designation No. 1 universal type,suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed complete all as specified and directed.

S&F for Aluminium Motrice lock 4 levers, vertical type 75mm size for aluminium doors complete all as specified and directed.

S&F 150 mm extruded Aluminium handles, cast type,anodised complete all as specified and directed.

S&F Aluminium anodised barrel tower bolt of extruded section 150mm long complete all as specified and directed.

S & F aluminium alloy anodized sliding door bolt with hasp and staple (bolt type) and fixing clips of sheets cast or extruded section and fixing bolts of extruded section or cast aluminium alloy 250mm size complete all as specified and directed.

S&F butt hinges 100mm, medium weight complete all as specified and directed.

Taking up or down 15mm bore dia, steel tubing & connections or removal to store complete all as specified and directed.

Taking up or down 20mm bore dia, steel tubing & connections or removal to store complete all as specified and directed.

M&L steel water tubing (medium grade) galvanised with all fittings and fixed complete to walls and ceiling or laid in floors 15 mm bore of pipe incl taking down of pipe complete all as specified and directed.

M&L steel water tubing (medium grade) galvanised with all fittings and fixed complete to walls and ceiling or laid in floors 20mm bore of pipe incl taking down of pipe complete all as specified and directed.

S&F in repair Rimless Single piece-WC with UF soft close seat cover, Hinges, Fixing Accessories Set and Accessories Set,Cistern fittingsincl S trap and other items , Size: 640x350x770mm, (concealed ‘S’ trap) complete all as specified and directed. Make : Cera Cat No. A1014110/ESSCO Cat No ECS- WHT-851S220NPP/Somany- "SWISS".

S&F in repair vitreous china clair with cleat Half pedestal oval bowl and provision for tap hole snow white wash hand basin (Size 480x480x520mm) colour brilliant / off white incl waste pipe and waste coupling over and including size complete all as specified and directed. Make: Cera- Cat Part No. A2040104 for Wash Basin and for pedestal Cat Part No. A2090102 Half Pedestal/ ESSCO ECS-WHT-801 for Wash Basin & ECS-WHT-301 for pedestal and Somany "ELITE"

S&F in repair brass chromium plated Basin Mixer single lever for half pedestal Wash Hand Basin complete all as specified and directed. Make: Cera Cat Part: G1017451, ESSCO Cat No C05103051b AND Somany Chrome 27111370011.

S&F in repair 15 mm dia CP Angle Cock, cast copper alloy, screwed down, high pressure, screwed both ends for iron pipe or for unions 15mm bore all as complete all as specified and directed. Make : Cera Cat Part No. G1017201,and ESSCO-SQT-526NKN AND Somany CHROME 272211400011.

S&F in repairs 15mm bore CP Two Way Angle valve cast copper alloy fancy type chromium plated and fixed complete all as specified and directed. Make: Cera Cat Part No. G1017211 AND ESSCO Cat Part No MQT-526AFKN AND 272211150061.

S&F in repair CP cardiff brass cascade Health Faucet with hose (Min length 1.5mtr of CP brass) & hook of CP brass complete all as spd and directed. Make: Cera Cat Part No. F8030106AB, ESSCO ALE-CHR-593 AND Somany CHORME 272150680341.

S&F in repair CP 600 mm towel Rail complete all as specified and directed. Make: Cera Cat Part No. F5011103CH, ESSCO AEC-1111N AND Somany 272130160111.

S & F in repair brass chromium plated tubular Towel Rack 600mm Long with Lower Hangers, Stainless Steel complete all as specified and directed. Make: Cera Cat Part No. F5011101CH, essco aec-1181-n and sOMANY 272130160081.

S&F in repair for CP toilet roll holder fixed to wall with chromium plated brass screw completely all as specified and directed. Make Cera Cat Part No. F5013110CH, ESSCO AEC-1151N and SOMANY 272130740041.

S&F in repair Liquid soad Dispenser CP complete all as specified and directed. Make: Cera Cat Part No. F5013111CH and Somany chrome-272151340071.

S&F in repair Kenso 320x335x620 mm urinal with sensor complete all as specified and directed. Make: Cera Cat Part No. A4010101 or equivalent

S&F in repiar Urinal Partitions complete all as specified and directed. Make: Cera

S&F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in repair Corner Glass Shelf (with Bracket) 300 mm x 300 mm complete all as specified and directed. Make Cera Cat Part No. F5005103 and Somany 272130160031.

S&F 15mm chromium plated cast copper alloy bib taps fixed in repair complete all as specified and directed.

S&F in repair Mirror of size 900x700 mm complete all as specified and directed. Make Cera Cat Part No D3510107

Supply & fixing in repair 1000 liter capacity ISI marked double layered rotational molded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position including making inlet/outlet connection complete all as specified and directed.

S & F in repair gun-metal, globe or gate valves of 20mm thick, with iron wheel head, screwed both ends for iron pipe and fixed etc complete all as specified and directed.

S&F of 15mm dia fancy type angle valve/gate valve cast copper alloy screwed both ends for iron pipe fixing complete all as specified and directed.

Taking down cement plaster including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed.

M&L for preparation newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for Complete removal of existing treatment, washing down and stopping of distempered and painted surfaces using electrical operated grinder and M&L applying two coats of exterior emulsion paint of make : weather coat of Berger / apex utima of Asian paints / Xtrapremium of Shalimar , over and incl of a coat of exterior wall primer over two coat acryllic wall care putty as aprproved by Manufacture. The work under this item shall be carried out by from authorised applicator of manufacturer complete all as specified and directed.

M & L two coats of OBD on old decorated plastered or unplastered surfaces over two coat acryllic wall care (Birla/JK white) putty and a coat of primer on walls including preparation of surfaces complete all as specified and directed. The contractor shall also stand for grarantee of the quality and finish of work under this item for period for a period of Two years from certified date of completion of complete work for which an amount Rs 10/Sqm of quantity of work done under this item shall be retained in final bill. This amount shall be returned only after completion of graratee. In lieu of retention the contractor may submit deposit receipts from any scheduled bank complete all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of ceiling / soffit and applying one coats of white wash complete all as specified and directed.

Demolition of RCC Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work and making good the disturbed area in CM 1:3 complete all as specified and directed.

M&L for weld-mesh of size 75x75x3mm to be wrapped on the exposed surface of rib of beam & on the slab bottom and tack welding to the exposed reinforcement at close intervals and gunite with cement mortar 1:3 mixed with admixture SIKA Plasto creat plus or equivalent make in Fosroc / Thermax as approved by GE around rib of beam or roof slab of thickness n.exc 40mm to be applied under an operating pressure. the gunited surface to be cured properly for a min of 7 days all in complete as per the technical specifications and manufacturer's instructions complete all as specified and directed.

Supply and apply of rust remover cum passivator to remove rust from existing reinforcement by using Product : Rustoff-100 of Sika or equivalent make in Fosroc / Thermax as approved by GE, with density : 1.01 Kg/ltr at 30°C and consumption : 0.2 kg/Sqm/coat complete all as specified and directed. Note : The material to be applied thoroughly on exposed rebars only with the help of a brush of suitable size. The area will be measured as length of bar x two times the dia of bar.

Supply and apply cement based polymer modified rebar corrosion protection system to existing reinforcement using cement based polymer modified rebar corrosion protection system with consumption : 3.75 kg/Sqm for two coats and product requirements: carbonation resistance : 2 mm of SikaTop Armatec®-108 of Sika or equivalent make in Fosroc / Thermax as approved by GE corresponds to 20 mm of normal mortar; bond strength > 1N/Sqmm according to ASTM C 882-78 complete all as specified and directed. Note : The material to be applied thoroughly on exposed rebars only with the help of a brush of suitable size. The area will be measured as length of bar x two times the dia of bar.

M&L for providing by mixing and trowel application of prepacked, light weight, two component structural grade polymer modified fibre reinforced thixotropic cement mortar Sika Monotop 122F of Sika or equivalent make in Fosroc / Thermax as approved by GE at an average thickness exceeding 10mm and upto 25mm to the prepared concrete substrate in soffit of slabs, beam, columns, parapets, fins and facias at any height, including finishing of applied Polymer mortar as per the technical specifications and manufacturer's instructions complete all as specified and directed.

S&F for stainless steel modular kitchen basket (in PVC cabinet) as per approved design and pattern of different types of baskets as directed by Engr-in-charge including drawer slides of required size complete all as specified and dircted.

M&L Prelaminated PVC solid Board ,18/19 mm thick, Prelaminated on one side with decorative choice lamination & other side balancing white lamination, including pasting with solvent chemical as required at site or fixed with screws complete as in Kitchen Cupboard, room cupboard, shelves / partition including fixing arrangement on walls complete as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets and frame work complete as specified and directed.

S&F PVC wall paneling, super strong quality single side prelaminated with flat or fancy patterned on laminated side, incl PVC 'L' and 'U' sections for finishing of corners and ends etc inclusive of fixing with screw or with solvent cement required at site on walls complete as specified and directed.

Taking down carefully copper/ Aluminium point wiring ( light, fans, socket, power socket) complete including taking out existing unserviceable terminal boxes and conduit with switches/sockets/fan regulators and fittings such as ceiling roses, pendants, tube lights fittings lamp holders, brackets light fittings, rectangular blocks DB MCCB etc and making good disturbed surface of wall/ floor etc to match with the existing the surface etc complete all as specified and directed.

Description all as per item No 144.00 above but excluding conduit

Taking down carefully copper/aluminium Submain wiring from battan /conduit from DBs, MCBs, etc) and making good to disturbed surfaces of walls, floor etc complete all as specified and directed.

Material and labour for point wiring with 1.5 sqmm (22/.3mm) PVC insulated and unsheathed FRLS single core multistranded copper conductor for one light/fan/bell point in existing PVC rigid non metallic concealed conduit 19/20 mm dia medium duty, ISI marked to be terminated & including pressed modular steel boxes & cover plate of module as required on site.including 1.5 sqmm (22/.3mm) PVC insulated and unsheathed FRLS single core multisrtaned copper earth continuity conductor controlled by one switch and/or one regulator complete including repairing the surfaces in CM 1:3 and finishing the surface as per exisitng treatment complete all as specified and directed.

Description all as per item No 147.00 (here-in-before) but One three pin 5 Amp socket outlet point on independent board controlled by one nos, one way switch on independent board complete all as specified and directed.

Description all as per item No 147.00 (here-in-before) but One three pin 5 Amp socket outlet point on same board controlled by one nos, one way switch on same board complete all as specified and directed.

Description all as per item No 147.00 above but point wiring with 2.5 sq mm single core FRLS cables and earth continuity wire with 2.5 Sq mm single core cable for one 3 pin 15 Amps socket out let point controlled by one nos, one way switch on independent board complete all as specified and directed.

Description all as per item No 147.00 above point wiring with 4 sq mm single core FRLS cables and earth continuity wire with 4 sq mm single core cable for one 3 pin 15 Amps socket for AC complete all as specified and directed.

Material and labour for point wiring with 1.5 sqmm (22/.3mm) PVC insulated and unsheathed FRLS single core multistranded copper conductor for one light/fan/bell point in and including PVC rigid non metallic new concealed conduit 19/20 mm dia medium duty, ISI marked to be terminated & including pressed modular steel boxes & cover plate of module as required on site.including 1.5 sqmm (22/.3mm) PVC insulated and unsheathed FRLS single core multisrtaned copper earth continuity conductor controlled by one switch and/or one regulator complete including repairing the surfaces in CM 1:3 and finishing the surface as per exisitng treatment complete all as specified and directed.

Description all as per item No 152.00 (here-in-before) but One three pin 5 Amp socket outlet point on independent board controlled by one nos, one way switch on independent board complete all as specified and directed.

Description all as per item No 152.00 (here-in-before) but One three pin 5 Amp socket outlet point on same board controlled by one nos, one way switch on same board complete all as specified and directed.

Description all as per item No 152.00 above but point wiring with 2.5 sq mm single core FRLS cables and earth continuity wire with 2.5 Sq mm single core cable for one 3 pin 15 Amps socket out let point controlled by one nos, one way switch on independent board complete all as specified and directed.

Description all as per item No 152.00 above point wiring with 4 sq mm single core FRLS cables and earth continuity wire with 4 sq mm single core cable for one 3 pin 15 Amps socket for AC complete all as specified and directed.

S&F Modular switch 1 way 6A 1 module Single pole, one way, 230 volts complete all as specified and directed.

S&F Modular switch 1 way 16A 1 module complete all as specified and directed.

S&F Modular socket 6A -2/3 pin combined 2 module type 230 volts AC complete all as specified and directed.

S&F Modular socket 6A/16A -2/3 pin combined 2 module type AC complete all as specified and directed.

S&F Modular lamp holder, insulated body with back plate & LED Bulb 9/12 watt suitable for batten fittings and complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F Modular ceiling rose surface bakelite 65mm x 50mm, 3 terminals with back plate etc complete all as specified and directed.

Supply & Fixing Modular type (1/2 module as per site requirement) ceiling fan regulator electronic step type suitable for 1200mm/1400mm sweep fan etc complete all as specified and directed.

S&F Inverter type Rechargeable LED Batten light fitting 20 watt 4 feet long includes LED tube complete suitable for fixation on wall/roof with body robust, corrosion resistant, superior finish and without any cracks . Led batten fitting should be of elegant design offer high Brightness, Energy saving, and upto 4 hrs back up (when Mains supply is off but switch is on condition), having Powerful lithium bttery-2600 mah, battery life-500 + Recharge cycle , charging Time - 8 hrs to 10 with lumen output should not be less than 100 lumens/watt , Corelated colour should be minimum 6000 degree Kelvin, sleek and modern design, emergency light is suitable for use in a variety of indoor, and automatically charges when switch is ON complete all as specified and directed.

S&F in repair Sheet metal enclosure distribution board SP&N,8 way, double door powder coated, protection class IP-42 suitable for mounting MCB DBs confirming to IS-13032, IS-8632, BS5484 with min 200 Amp rating copper bus bar complete all as specified and directed .

S&F LED light fitting 1x20 watt 4 feet long including LED tube with driver complete suitable for fixation on wall/roof with body robust, corrosion resistant, superior finish and without any crack. The fitting should have following technical specification :- (i) Surge protection of minimum 2m KV (ii) Power factor should be more than 0.90 (iii) Cool white colour, (iv) Lumen output should not be less than 1700 lumens, (vi) can withstand with input voltage range 140-280V AC, (vii) Colour rendering index should not be less than 80, (viii) Corelated colour should be minimum 6000 degree Kelvin (ix) Minimum warranty period of 2 years.

S&F Sheet metal enclosure distribution board SP&N, 12 way, double door powder coated, protection class IP-42 suitable for mounting MCB DBs confirming to IS-13032, IS-8632, BS5484 with min 200 Amp rating copper bus bar complete all as specified and directed .

S&F MCBs SP 6 to 32Amps, 240 volts, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) complete all as specified and directed. Note : Make of the MCB should be the same as that of DB

S&F MCBs SPN 32Amps to 63 Amps, 240 volts, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) complete all as specified and directed. Note : Make of the MCB should be the same as that of DB

Supply & Fixing in replacement LED light fitting Surface/Roof mounting Round type complete 1x12 W, (Dimension(mm) for round light ; 180x40) polycarbonate batten including LED Tube, suitable for DOT Auditorium complete all as specified and directed. Make : Havells, Bajaj CG, Wipro, Osram, Syska or equivalent as approved by GE

Supply & fixing in replacement of Bldg security light fitting LED 30 W, pressure die cast housing epoxy powder coating IP -65, connected with and including 0.5 sqmm flexible copper multistranded conductor cable including security light bracket made to shape out of GI pipe 40 mm bore light grade, 1.5 mtr length and fixed with MS Calmps of size 40x5 mm-02 nos,nuts, bolts and washers on wall complete all as specified and directed.

Supply and instal wall mounted type units indoor & outdoor of capacity 1.5 TR with copper condenser coil inverter AC complete with cordless remote control unit and with in built cooling arrangement and digital inverter twin rotary compressor single phase unit 220 V-240 V, 50 Hz minimum 5 Star rating and EER 3.2 of capacity & outer unit is installed on stand complete all as specified and directed. Make: Hitachi Voltas/Bluestar/Samsung/Carrier

M&L for WEE Plus LED bulk head luminaire of capacity 10 Watt an ideal energy efficient solution for upgrading conventional GLS bulkhead luminaires to LED bulk head IP 65 complete all as specified and directed. Make : Bajaj BIBWP LED 10W WH or equivalent in Havells/Crompton Greaves/Philips/Wipro/Syska as approved by GE.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 16 Sq.mm nominal cross section, 2 Core in service connections complete all as specified and directed.

S&F Sheet metal enclosure distribution board TPN, 4 way, double door powder coated, protection class IP-54, isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCCB as incoming and MCBs as outgoing in DBs confirming to IS-13032, IS-8632,BS5484 with min 200 Amp rating copper bus bar and grouting, fixing on wall with nut bolts washers proper with PCC works complete all as specified and directed.

Supply and fixing MCCBs FP 63 Amps, 215 volts, 16 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) complete all as specified and directed. Note : Make of the TPN should be the same as that of DB

S&F for decorative wall light stainless steel rust free fixture with white glass diffuser including 10 Watt capacity minimum filament lamp complete all as specified and directed. Make : Havells Voila wall light or equivalent make of Bajaj/Philips/Crompton.

M & L for submain wiring alongwith earth wire with the 2x6.0 sq. mm +1x6.0 sq. mm earth wire sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed as required (The above mentioned specified runs of single core cables and specified runs of earth continuity conductors and the relevant conduit with accessories shall be measured as one run length) complete all as specified and directed.

Supply & fixing Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 amp complete all as specified and directed

Supply & fixing Exhaust Fan steel body with ouvers and accessories 230 V 450 MM sweep heavy duty with blades & copper winding with service value complete all as specified and directed

S &F replacement PVC air fresh air Fan 200/250 mm sweep, 230 volts, fixed on wall with suitable size nut, bolts and washers and connection complete all as specified and directed. Note ; Meke a hole as per site requirement rate include in this price Make Orient and its equivalent and verified by local area manager

Supply & fixing electric water heater storage type steel body with copper inner tank and heating element upto 2KW capacity 25 Litre, BEE 5 Star rated complete with all accessories such as safety valve, PVC connection piece etc all as specified and directed.

Supply & fixing BLDC type ceiling fans complete with blades, down rods electronic regulator and accessories 230V with minimum air delivery 245 CFM, 1200 mm sweep size, white in colour with remote control & copper winding, BEE 5 Star rated all as specified and directed. Make : CAT Part No. HAVELLSS EPIC Signia and equivalent make of Bajaj/Crompton.

M&L for Earthing complete with galvanised mild steel earth electrode plate 600 X 600 X 6 mm thick buried directly and vertically in ground connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical Plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion ncluding provision of earth wire protected by galvanised iron 15 mm bore medium grade pipe with all fittings from the earth electrode fixed along pole or wall with and including 25 x 6mm flat iron clamp, bolts, nuts and washers and watering pipe shall be 20 mm bore GI medium grade from top of the earth pit to top of earth plate electrode including all excavation and earth work in any type of soil and removal of soil upto 50 metre, PCC pit with pre-cast RCC cover with handle, charcoal/salt, funnel , CI frame etc complete all as specified and directed. NOTES : (i) The concrete pit shall be made in PCC 1:2:4 type B-O, using 12.00 mm graded crushed stone aggregate 40mm thick precast cover slab of RCC (1:2:4), type B-1, using 20mm graded crushed stone aggregate with suitable MS handle in lieu of CI cover (ii) Item includes the cost of 7.5 metre GI pipe for protection of earth wire. Any variation in length shall be adjusted through deviation order. (iii) Items includes cost of 7.5 metre earth lead wire. Any variation in length shall be adjusted through deviation order. (iv) Earth electrode shall be surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides.

Please Enable Macros to View BoQ information