Repair and Renovation of Bungalow No. 1 of KV Colony at WCL HQ, Nagpur

Part A Civil Works

Repair to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge.

Providing and fixing Sintex / Bajaj or equivalent make of ISI marked PVC false ceiling (or wall Panelling) on MS rectangular hollow section 38 mm x 25 mm fixed to wall with PVC roll plugs and main runner & intermediate section of MS square tube 25 mm x 25 mm duly coated with anticorrosive primer & ceiling panel made out of rigid PVC multichamber hollow plastic section of 6 mm thick as per instruction of Engg-in-charge

Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25 mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete : 20 mm dia

Providing and fixing 900 mm high S.S 304 Grade Stainless steel railing with 40 mm diameter and 1.5 mm thick at top, 40 mm diameter and 1.5 mm thick vertical supports spaced at 1.5 m center to center and 8 mm thick toughened glass including fabricating, fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe etc. complete

Providing and fixing Canopy Retractable awning (Manual) Fabric : Saulenda Acrylic with 10 year leakage warranty and Frame : New Sun Setter with 5 years mechanical warranty as per instruction of Engineer in charge.

Providing and applying smooth stone textured finished 1.5 to 2 mm thick as per manufacturer spcifications over old and new plastered surface i.e. scrapping the surfae, applying specified primer for surface stabilisation and making necessary pattern there on by trawel / spraying as per architectural drawing and finishing with 2 or more coat of pure acrylic based clear coat paint complete as per the direction of E/I on internal surface with necessary scaffholding

Providing, applying, fabricating and fixing panel of aluminium composite panel cladding in approved shape made out of 4 mm thick ACP sheet material consisting of 3mm thick Fgrademineralcore following NBC part IV Fire and lifesafety (having 2 hours fire resistance in accordance to ASTME 119-12 and BS 476 part 6 and 7 class) sand witched between two aluminium sheets (each 0.5 mm thick of AA5005 / AA3105 grade). The aluminium composite panel cladding sheet shall be coil coated with kynar 500 based PVDF/ Lumiflon based fluro polymer resin (having 70:30 ratio of PVDF and acrylic) coating of approved colour and design on top face and polymer (service) coating of bottom face as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicon sealent, backer rod setc. overall weight of the ACP shall not be less than 7.5 Kilogram / One Square Metre)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing I paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fxing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10 kg / sqm)