REPAIR/REPLACEMENT OF WALL PANELING, FALSE CEILING, JOINERY AND ALLIED WORKS IN CERTAIN BUILDINGS OF LIVING IN ACCOMMODATION AT AIR FORCE STATION THOISE

Amount

Dismantling timber framed work scantlings 40 sq.cm and over in section, in any position etc. complete all as specified and as directed.

Dismantling timber framed work as in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified and as directed.

Dismantling of boarding, any description, fixed in any position with nails etc, complete all as specified and as directed.

M&L for second class hard wood in scantlings, clean sawn timber fixed complete all as specified and as directed.

M&L for Second class wrought hard wood Plain fillets, square, rectangular or triangular in section, sectional area exc. 13 sqcm but n.exc. 25 sqcm, secured with screws complete all as specified and as directed.

Plugging to walls in repair complete for wood fillets, grounds moulding, etc. on cement concrete walls, at distance n. exc 1 mtr complete all as specified and as directed.

M&L for 6 mm thick Veneered decorative plywood, grade 1 (5 Nos of ply) (with BWR resin) with decorative face veneers on one face, fixed with nails to timber frame work as in wall/panelling etc complete all as specified and as directed.

M&L for 6 mm thick Veneered decorative plywood, grade 1 (5 Nos of ply) (with BWR resin) with decorative face veneers on one face, fixed with nails to timber frame work as in ceiling, flat or sloping, etc complete all as specified and as directed.

M&L for preparing new or previously untreated wood based surfaces of any description, not otherwise described, over 10 cm in width or girth and applying two coats of finishing coat with synthetic varnish only complete all as specified and as directed.

M&L for 4 mm thick plywood (3 Nos of ply), grade BWR, type BB fixed with screw to timber frame work as in ceiling, flat or sloping etc complete all as specified and as directed.

M&L for preparation of new or previously undecorated wooden surface of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of Pink primer complete all as specified and as directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.

S&F Anodised aluminium snap grid frame work of size 605 x 605 mm for false ceiling complete all as specified and as directed.

M&L for 10 mm thick non asbestos fibre cement building boards fixed or laid/inserted to timber/GI/aluminium framed work in ceiling flat or sloping, etc, complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc.1.5sqm but n.exc 4 sqm each complete all as specified and as directed.

S&F Solid PVC door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, supplied and fixed in repair in opening as per specification and drawing including making good to hold fast complete all as specified and as directed.

Factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of MS tube for top and bottom rail, MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside the solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the ms frame welded/sealed to the stiles and rail with suitable pvc sheet beading, and jointed together with solvent cement, supplied and fixed in repair in the frame at site on per specification and drawings complete all as specified and as directed.

S&F 75mm butt hinges medium weight, cold rolled, mild steel complete all as specified and as directed.

S&F 100 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F 100 mm long Aluminium anodised handles, cast type, complete all as specified and as directed.

Taking down shutters of any description exceeding 1 sqm but not exceeding 2 sqm each complete all as specified and as directed.

S&F for 35 mm thick second class hard wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or veneered particle board with commercial face veneers, etc complete all as specified and as directed.

S&F 30mm thick second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a); supplied and fitted to chowkat complete all as specified and as directed.

S&F 200 mm long aluminium anodised barrel tower bolts of extruded section, ISI marked and fixed complete all as specified and as directed.

S&F 100 mm long medium weight, cold rolled mild steel butt hinges complete all as specified and as directed.

S&F 150 mm long extruded aluminium alloy handles, fabricated type, anodised, ISI marked complete all as specified and as directed.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

S&F 100 mm size extruded aluminium alloy handles, fabricated type anodised ISI marked complete all as specified and as directed.

S&F in repair aluminium (Diecast body) Door closer hydraulically regulated, designation No.2, universal type, suitable for door shutters of 701 to 850 mm in width and weight between 36 kg to 60 kg and fixed etc complete all as specified and as directed.

S&F in repair 140mm size floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.

M&L for 4 mm thick glass sheet, ordinary quality and glazing with oil putty/beads in square n.exc. 0.50sqm in each pane complete all as specified and as directed.

M&L for 12mm thick wood laminated flooring 150 x 1200 mm consisting of 2 mm thick TEAK/OAK/Rose wood, wood veneer, which is factory finished over 8mm to 10mm foam sheet, the laminated wooden flooring tiles shall be done with a polyurethane coat complete all as specified and as directed. (Make: Action Tesa)

M/S HAJI MOHD ALI

ESS AAR ENTERPRISES