GE/PKT-69/2019-20

Amount

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation etc and getting out in any type of soil complete all as specified and directed.

M&L for Machine pressed precaste concrete interloking paver block with grey cement or pigment mix any shape and size conforming to IS-15658-2006 of 80mm thickness M-40 grade complete all as specified and directed.

M&L for 100mm thick PCC M-7.50(nominal Mix) type D-2 1:4:8 (40mm graded stone aggregate ) as in sub base complete all as specified and directed.

M&L for 50mm thick sand filling under floor including watering and raming consolidation complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins,arches pillars etc but excluding ashlar facings ,dressed stonework and precast concrete articles complete all as specified and directed.

M&L for Taking down cement plaster on brick or stone wall etc including ranking out joints ,hacking for key ,scrubbing down with water etc complete all as specified and directed.

M & L for providing precast cement concrete 1:2:4 type B-1 ( 20 mm graded aggergates ) as in landings cover slab ( for Manholes ) chullah hoods chajjas water trouhs mangers shelves and similar articles with plain faces set in CM 1:4 complete all as specified and directed.

Demolition of reniforcement cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Providing precast cement concrete type B0 1:2:4 (12.5mm graded stone aggregate) louvres and jallies, 35 mm thick (mea sured solid), including all mouldings set in CM 1:4 complete all as specified and directed.

M&L for 40mm thick damp proof course in cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregates to horizontal or vertical surfaces including necessary formwork complete all as specified and directed.

Removal of excavated material soil n. exc 50m and depositing where directed at a level n. exc. 1.5 above the starting point complete all as specified and directed.

Returning filling in including spreading, levelling, watering and well ramming in layers n. exc 25cm thick. (Note:- excavated soil will be filled under floor) complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40mm graded agg in fdn filling and mass concrete etc complete all as specified and directed.

M&L for hard core of broken stones or boulders of gauge not exc 63mm, deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone agg as in floor,finishing the surface fair and even complete all as spd and directed.

M&L for RCC M-25 design mix using 20 mm graded stone aggregate in roof Beams, cantilevers, bressummers, lintels over 1.5m clear span complete all as specified and directed.

M&L RCC M-25 design mix using 20 mm graded aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for form work to sides of beams floor or roof beams, lintels and chajjas etc horizontal or sloping for rough finished surfaces of concrete complete all as specified and directed.

M&L for form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick horizontal or sloping for rough finished surfaces of concrete complete all as specified and directed.

All as per Srl item No 19.00 here-in-before, but to edge concrete flats, roof slabs and similar works complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and directed.

M&L for Mild steel TMT bars 6mm to 8mm dia,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and directed.

All as per Srl item No 22.00 here-in-before but 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders complete all as specified and directed.

M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement all as specified.

M&L for Rendering 15mm thick on other than faces of brick work or concrete surfacesin CM 1:6 finished even and smooth without using extra cement all as specified.

Rendering 5mm thick in cement mortar 1:3 on concrete surfaces as in ceiling finishing the surfaces even and smooth without using extra cement all as specified.

S&F vitrified tiles, coloured,joint free, superior quality 10mm thick (square/ rectangular) polished, area of each tiles exc. 0.18 Sqm but not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surface 300 x 450x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match laid in approved pattern and design incl highliter etc over and including 10 mm thick rendering in CM1:4 as in backing coat rough finished surface complete all as spd and directed.

M&L for joint free Non - skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

M&L for preparation of new plastered surface of wall and applyng two coats of cement base paint over a coat of cement primer complete all as specified and directed .

M&L for preparation of new plastered surface of wall and applying white cement based wall care putty on the surfaces with minimum 1.5mm uniform thickness and making surface absolutely smooth applying two coats of oil bound distemper white or tinted over and including one coat of primer on wall surface complete all as specified and directed

M&L for three coats of white wash on newly plastered surfaces of wall including preparation of surfaces complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed .

M&L for water proofing treatment by applying water proofing membrane APP (Atactic Polypropylene Polymer) modified membrane with non-woven polyster reinforcement/mat with thermal insulation with white mineral gravel finished on upper side of weight not less than 3.5 kg/sqm and thickness not less than 3 mm, laid by torch application method with overlap 100 mm on length side and 100 mm on the width side over a coat of hot industrial bitumen 85/25 applied @ 1.20 Kg/Sqm on prepared surfaces complete all as specified and directed and laid over and including 20 mm thick rendering , rendering to be finished even and smooth using extra cement in CM 1:4 incl mixed with water proofing admixture @ 200 ml per bag of cement complete all as specified and directed .

Supply only Liquid water proofing compound complete all as specified and directed by Engr-in-charge.

S&F Rotational moulded polythylene water storage tanks (cylindrical vertical) ISI marked, with closed top hosted and fixed in position all as specified 500 litees capcity complete all as specified and directed.

S & F Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm - 210gms) complete all as specified and directed .

S&F 15mm bore Steel water tubing 'medium grade', galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed.

S&F 20mm bore Steel water tubing 'medium grade', galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed.

S&F in repair 15mm bore, cast copper aloy, CP bib taps fancy type long body , half turn , screwed down high pressure for iron pipes complete all as specified and directed.

S&F in repair stop valves, 15mm dia, cast copper alloy,chromium plated fancy type with long shank and cup(concealed type) screwd down,high pressure with crutch or butter fly handle,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

S & F PVC connection 15 mm bore and 450 mm long including brass check nut at both ends screwed for iron pipe of 15 mm bore complete all as spd and directed.

S&F in repair soap dish brass chromium plated Round/oval shaped fixed to wall with PVC gutty and CP screws complete all as specified and directed.

S&F in repar Tubular towel rail of brass chromium plated, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed.

S&Fin repair Brass Chromium plated shower rose 125 mm dia with arm swivel joints, complete all as specified and directed.

S & F in repair 60 cm long glass self assembly consisting of 5.50 mm thick glass shelf 12 cm wide with chromium plated bracket guards and railing screws complete all as specified and directed .

S & F pressed steel frames 165 x 60 mm x 1.25 mm thick with one or more rebates including necessary lugs/hold fast duly tarred with bitumen and sanding with sharp clean sand, hinges, lock strike plate, complete all as spd and directed including cement concrete type B-1 1:2:4 using 20 mm graded stone aggregate as in filling hollow of frame with plain cement concrete and hold fast complete all as specified and directed .

S & F pressed steel frames 105 x 60 mm x 1.25 mm thick with one or more rebates including necessary lugs /hold fast duly tarred with bitumen and sanding with sharp clean sand, hinges, lock strike plate, complete all as spd and directed including cement concrete type B-1 1:2:4 using 20 mm graded stone aggregate as in filling hollow of frame with plain cement concrete and hold fast complete all as specified and directed .

S&F PVC Door frame solid of size 50mm x 47mm made out of 5mm plain colour PVC sheet re-inforced with MS square tube in opening as per specification and shown on drg complete all as specified and directed .

S&F factory made PVC shelf as in cup board shelves/ shutter of required size consisting of panel of 20 mm thick celuka PVC Ply and hold fast for supporting shelves and 1mm thick PVC sheet leaping on exposed edges made out of PVC sheet of density 600Kg /cum manufactured by an ISO-9000 certified company, using solvent. PVC ply shall be fixed in wall by MS Screw of required length complete all as specified and as directed.

Taking down chowkat with shutter (without taking off shutter from frame) exc 1.5 sqm but n.exc 4 sqm each complete all as specified and directed .

S&F 35mm thick flush door shutters ,solid core construction with block board core and plywood face panels commericiale type on boath sides including one coat pink primer and two coat synthetic enamel paint complete all as specified and directed .

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed.length of bolt 300 mm complete all as specified and directed.

S&F aluminium anodised sliding door bolt with hasp staple bolt type and fixing clips of sheet cast or extruded section and fixing bolts of extruded section or cast aluminium alloy and fixed 250mm long complete all as specified.

S&F butt hinges medium weight 100 mm cold rolled mild steel complete all as specified and directed.

S&F Continuous (piano) hinges stainless steel bright finish or electrogalvanised 40mm width of flaps complete all as specified and directed .

S & F aluminium anodized barrel tower bolts of extruded section 150 mm long complete all as specified and directed .

S&F Extruded aluminium alloy handle fabricated type anodized 150 mm long complete all as spd and directed.

S&F Factory made solid pannel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stile and plain colour PVC sheet for top rail , lock rail and bottom rail on either side and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rail with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing to frame at site as per specification complete all as specified and directed.

S&F Factory made fully glazed/wire gauge single piece front side PVC printed door shutter 35 mm thick (style) consisting of frame made out of mild steel tubes for top and bottom rails. Mild steel frame shall be covered with heat moulded plain cover pvc "c" channel having a pvc sheet strip of 20 mm width stuck inside with solvent cement for stiles & pvc laminated sheet for top rail,lock rail & bottom rail on either side and gap insert for top rail and bottom rail; panching of prelamnited sheet to be fitted in the mild steel framed welded/sealded to stiles & rails fixed with PVC sheet beading and jointed together with solvent cements. supplying and fixing in frame as per drg No-CEPZ/TD-378/11 SHEET 1/1. The rate include for Stainless Steel wire gauge of 24 gauge to be fitted inside area of stiles and rails all as specified and directed by Eng-in-charge.

M&L for preparation of newly steel and iron surface of any description width or girth exc 10 cm and applying two coats of synthetic enamel paint over and including a coat of red oxide primer complete all as specified and directed.

Taking down chowkat with shutter (without taking off shutter from frame) n exc 1.5 sqm each complete all as specified and directed.

S & F Steel windows/ventilator factory made , made out of mild steel tubular frame work suitable for double shutters ie glazed and gauged shutters .Glazed shutter made out of Z section with sash bar and gauged shutter made out of Z section without sash bar incl hinge tower bolt handle, grills made out of 10 mm sq bar stay hook incl one shop coat of red oxide primer and two coat of synthetic enamel paint taarred hold fasts, PCC blocks, incl 3 mm thick sheet glass and frosted glass for ventilator in toilets etc stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18 mm etc. all as shown on drg No CEPZ /TD-245/01 sheet 1/1 and CEPZ /TD -246/01 sheet No 1/2 & 2/2 complete all as specified and directed.

M&L for construction of Soakage wells of size 1.20 mtr dia x 3mtr depth excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM 1:4, RCC cover slab in M25, interconnecting pipes of RCC/DWC complete filled with brick bats all as per drg No CEPZ/C-TD/13/13 Sheet 1/5 complete all as specified and directed.

Septic tank for 10 users incl exc in hard/dense soil, foundation in PCC 1:2:4, brick work in CM 1:4, RCC slab covers including RCC precast manhole cover having 6mm plate embedded all around / fibre reinforced covered with angle from frame vent shaft and sludge chambers etc complete Drg No CEPZ/C-TD/13/13 Sheet 3/5.

M&L for 100mm thick concrete bed to drian pipe 200mm dia including packing under and haunching against the side of pipe after they are laid and tested in cement concrete 1:3:6 type C-2 complete all as specified and directed.

S&F reinforced concrete pipes 200mm dia, class NP 2 with one collar per length of pipe complete all as specified and directed.

M&L for surface excavation not exceeding 30 cm deep and avg 15 cm and getting out in soft/loose soil complete all as specified and directed.

M&L for non abrasive paving (rectified endura) cement concrete coloured tiles 300 mm x 300 mm x 10 mm thick set jointed and pointed in neat cement slurry mixed with pigment laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

M&L for cement concrete type C2 1:3:6 (using 40mm gde stone agg) as in surface channels and drains etc finished the surface even & smooth without using extra cement complete all as specified and directed.

Demolition of cement concrete, of any description and any position not otherwise specialy provided for above or below ground level complete all as specified and directed.

M&L for PCC 1:5:10 type E-2 using 40mm graded stone agg as in foundation, filling and mass concrete complete all as spd and directed.

M&L for brick work with sub-class 'B' burnt bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 in one brick thick wall complete all as specified and directed.

All as per srl item No 74.00 here-in-before but except brick complete all as specified and directed. (Note:- Old brick obtained for demolition will be reused.)

M&L for brick work with sub class 'B' old size bricks on edge walls (less then 1/2 brick built in CM 1:4 complete all as specified and directed.

M&L for brick work with sub class B old size bricks stright or curved on plan exc 6m mean radius built in CM 1:6 in one brick thick wall complete all as specified and directed.

All as per srl item No 77.00 here-in-before but except brick complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B-0 ( using 12.5 mm graded crushed stone aggregates) as in copings, ,bed plates and the like including weathering, slightly rounded or chamfered angles and throating, including necessary form work complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean(using mechanical blower) and washing down with water to remove dust etc complete all as specified and directed..

Brushing neat cement slurry @ 3 kg of cement per sqm complete all as specified and directed.

M&L for 100 mm thick PCC M-20 (Nominal mix) using 20mm graded crushed stone aggregates as in floors/ paving surface finished even and smooth without using extra cement complete all as specified.note:- the pannel will be laid in alternate bay, incl filling joint complete all as specified and directed.

M&L for 75mm thick PCC ,1:2:4 using 40mm graded stone aggregate as in floor , finished even & smooth w/o using extra cement complete all as specified and directed..

Earth filling under floors, spreading, levelling in layers n.exc 25cm thick each incld watering & well ramming complete all as specified and directed.

Extra for forming fair finished drain or drain channel 30 cm inner girth in cement concrete using extra cement including forms moulds mitred stopped ends etc complete all as specified and directed.

M&L for plain cement concrete in roof kerbs, surface channel of drains or mud stops, rounded or chamfered on edges type B-1, 1:2:4 (20 mm graded stone aggregate) complete all as specified and directed.

M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooksand hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe- 290 (Gde E- 165) complete all as specified and directed.

M&L for mild steel, plain, black sheet 1.25 mm thick in hearths; covering to door shutters; covering to door chowkats (frames); cut to size edges beaded if directed,welded to steel members, etc., including bending, turning up, mitred angles, stopped ends, outlets, etc. as required complete all as specified and directed.

M & L for 75 mm thick cement concrete type D- 2, 1:4:8 ( using 40mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L for 40 mm thick cement concrete type B1 1:2:4(20 mm graded stone aggregate) finished even and smooth without using extra cement as in flooring complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed.

Dismantling Plain or corrugated Asbestos cement (corrugated, semi corrugated etc) as in roof covering including ridges complete all as specified and directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and directed.

S&F Galvanised corrugated mild steel sheeting with two corrugation side lap, with L-type or J-type or cranked hook bolts & washers, in roofs, walls etc with grade of zinc coating 275 of 0.63mm thick complete all as specified and directed.

S&F Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip & straight flashings (length & girth as fixed) with grade of zinc coating 275 of 0.63mm thick complete all as specified and directed.

Dismantling timber scantlings 40sq. cm and over in section, in any position as in wooden trusses in framed work of any description complete all as specified and directed.

M&L for 40mm thick boarding 2nd class hard wood planed one side & edge tongued and grooved or rebated fixed with screws wooden surface finished smooth complete all as specified and directed.

M&L for 2nd class hard wood clean sawn in scantlings fixed to timber framed work complete all as specified and directed.

M&L for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick, of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for pre painted galvalume aluminium, zink coating GI based plain steel sheet 0.5mm thick of any colour having tensile strenth of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws in ridge complete, all as specified and as directed complete all as specified and directed.

M&L for steel work in tubular section including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.

M&L for 50 mm thick cement concrete type B2 1:2:4(40 mm graded stone aggregate) finished even and smooth w/o using extra cement as in flooring complete all as specified and directed.

Taking up or down 15mm steel tubing and connections including removal to store complete all as specified and directed.

Taking up or down 20mm steel tubing and connections including removal to store complete all as specified and directed.

S&F in repair 25 mm dia fancy type pre painted stainless steel droprey rod fixed in position complete all as specified and directed including taking down old curtain rod and making good to match the existing surface complete all as specified and directed.

S&F in repair 25 mm dia fancy type stainless steel curtain brackets and knob fixed in position complete all as specified and directed including taking down old bracket any type and making good to match the existing surface complete all as specified and directed.

S&F in repair single peice Couple Closet EWC Coloured of dimension 65cmx35cmx70cm hight complete with all fitting and fixture complete all as specified and directed.

S&F in repair vitreous china wash hand basin, oval counter top of size 550mm x 400 mm with all fittings and fixture like brass coupling, 750mm long waste pipe and bracket complete all as specified and directed.

S & F in repair Pillar cock fancy type for wash hand basin chromium plated 15 mm bore cast copper alloy with capstan heads screwed down high pressure complete all as specified and directed.

S & F in repair Vitreous china half stall urinal complete including providing and fixing plugs bedding urinal against wall in cement mortar 1:2,securing urinal to plugs with and including 60 mm long brass screws pointing around urinal back in cement including CP waste coupling 32mm dia and waste pipe and CP urinal spreader and fitting suitable for 15mm dia pipe complete all as specified and directed.

M&L for granite stone slab 18 to 20 mm thick Z black machine cut, bedded as in steps jambs pillars window cills cooking platform counter for WHB etc and the like and jointed with grey cement and pointed with white cement with admixture of pigments to match the shade of granite stone including rubbing/grinding & mirror finish polishing/granite polishing incl moulding of edges over and including 15 mm thick screed bed in cement mortar 1:6 complete all as spd and directed.

S&F in repair grating doom type 125mm dia of PTMT (minimum weight 40 gms) complete all as specified and directed.

S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

M&L PVC (SWR) floor trap 75mm dia with grating including jointing with solvent cement fixed in cement concrete 1:2:4 complete all as specified and directed.

S&F PVC (SWR) vent cowl 75mm dia complete all as specified and directed.

S&F P or S Trap 100mm dia of bore of pipe complete all as specified and directed.

S&F anodised aluminium snap grid frame work size of frame work 605mmx605mm for false ceiling comperrising of GI perimeter channel 0.55mm thick with two unequal flanges of 20mm and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screw at 450mm c/c intermediate channel 0.9mm thick heaving to equal flanges of 15mm each and web of 45mm suspended from soffit of approx 900mm c/c with GI cleat and steel expansion fasteeners with and including ceiling section not exc 1.20m length of 0.55mm thickness heaving kurled web of 50mm and flange of 26mm each with lips of 10.50mm fixed to the intermedite channel with connectingclips across the intermedite channel at 457 mm center to center complete all as specified and directed.

Dismantling false ceiling boards fiber pulps insulation etc or insulation boards /slabs/blankets including cover fillets complete all as specified and directed.

S&F 18/19mm thick perforated particle board /tiles, for insulation and accoustic purposes, 60cm x60cm in size fixed with GI frame or with staple on snap grid in ceiling flate or sloping complete all as specified and directed.

All as per item No 121.00 here-ih-before but 'fixed in repairs'.

M&L for Providing and fixing Gypsum board 12mm thick in ceiling fixed with screw as per manufactures instruction complete all as specified and directed.

M&L for preparation of wooden surfaces of any description not otherwise described over 10cm width or grith and applying one coat pink primer and two coat synthetic enamel paint complete all as specified and directed.

Complete removal of existing treatment of wall applying one coats of cement based wall care putty (Birla/JK White) for smoothness surface including rubbing and sanding complete and applying two coat of oil bound distemper over and including one coat of primer (as per manufacturer instructions) complete all as specified and directed.

Complete removal of existing treatment of external wall applying two coats of cement base paint over and including one coat of cement primer on old surfaces incl preparation of surfaces complete all as specified and directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding(but not backing ), removing serviceable tile to store and rubbish of the premises complete all as specified and directed.

S&F 25mm thick glossy finished chequred cement concrete coloured tiles 30cmx30cmx25mm thick set and jointed and pointed in neat cement slurry in floor complete with mixture of white and grey cement in equal proportion with pigment including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floor aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

Taking down old unserviceable copper/aluminium point wiring (light, fan, socket , power socket and bulk head fittings) on surface wiring on wooden batten/casings & caping complete, including fixture and fittings such as switches, ceiling roses,pendents holder, regulators and sockets by unscrewing carefully from boards etc and making good disturbed surfaces of walls, as per existing finishes complete all as spd and directed.

M & L for point wiring for one light/one fan controlled by one switch with 1.5 sqmm PVC insulated unsheathed multistranded copper conductor FRLS cable with and including PVC concealed conduit heavy duty 20 mm dia having thickness not less than 1.8 mm with all fittings including anodised pressed steel sunken box having thickness not less than 2mm with 3mm thick bakelite laminated sheet ISI marked for switches and sockets , including 1.5 sqmm PVC insulated unsheathed multistranded copper conductor FRLS cable as earth continuity conductor connected to comman earth dolly, including cutting chiseling for concealed piping and making good disturbed surface to match with the existing surface complete all as specified and directed.Note: (a) Insulation test of point wiring (b) colour coding is to be maintained .(Ph-Red, N-Black, Half -Yellow, Earth- Green)

All as per srl item No 130.00 here-in- before but for call bell point complete all as specified and directed.

All as per srl item No 130.00 here-in-before but for 5 pin 5 amps socket outlet on independent board complete all as specified and directed.

All as per srl item No 130.00 here-in-before but for 3 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed.

M & L for point wiring with 2.5 sqmm PVC insulated unsheathed multistranded copper conductor FRLS cable with in and including PVC concealed conduit heavy duty 20mm dia having thickness not less than 1.8 mm with all fittings including anodised pressed steel sunken box having thickness not less than 2mm with 3mm bakelite thick laminated sheet ISI marked suitable for 5 pin 15 amps socket outlet ,including 2.5 sqmm PVC insulated unsheathed multistranded copper conductor FRLS cable as earth continuity conductor connected to comman earth dolly in and including cutting chiseling for concealed piping and making good disturbed surface finishing the surface to match with the existing surface complete all as specified and directed.Note: (a) Insulation test of point wiring (b) colour coding is to be maintained. (Ph-Red, N-Black, Earth- Green)

All as per srl item No 134.00 here in above but using 4.00 sqmm PVC insulated unsheathed copper conductor multistrand flexible cable and 4 sqmm PVC insulated unsheathed copper conductor multistrand cable (green color) as earth lead complete all as spd and directed.

S & F switch piano flush type one way 5 amps SP 240 volts complete all as specified and directed.

S & F switch piano flush type one way 15 amps SP 240 volts complete all as specified and directed.

S & F socket outlet 2 in 1, 5 pin 5 amps flush type 240 volts complete all as specified and directed.

S & F socket outlet 2 in 1, 5 pin, 5 and 15 amps flush type 230 volts complete all as specified and directed.

S & F electric bell ding dong AC 230 volts single pole complete all as specified and directed.

S & F bell push with modular bell push 6 A, 1 Module 240 volts complete all as specified and directed.

S & F modular switch 1- way, 6 amps, 240 volts, 1 module complete all as spd and directed.

S & F modular switch 1- way, 16 amps, 240 volts, 1 module complete all as spd and directed.

S & F modular socket 6 amps, 2/3 pin combined 2 Module, 240 volts complete all as specified and directed.

S & F modular socket 6/16 amps, 2/3 pin combined 2 Module, 240 volts complete all as specified and directed.

S &F Sheet metal plug and socket enclosure single pole with three pin plug and earthing arrangement complete with one single pole MCB of capacity 20 Amps 240 volts 'c' curve complete all as specified and directed .

S & F fan regulator with Modular fan regulator 120 watts, 2 Module, 240 volts, 5 Steps, ISI Marked complete all as spd and directed.

S & F lamp holder/batton holder/angle holder insulated body with bakelite back plate suitable for fittings complete all as specified and directed.

S & F ceiling rose 65 x 50mm three terminals complete all as specified and directed.

S & F in replacement of CFLs with LED smart Lamp, B22 type,14 watt, complete all as specified and directed.

S & F in replacement energy saving decorative LED box type with Led Rod 20 watt (4 Feet), 230 volts, 6500 K energy efficient tube light fitting extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver complete with all accessories prewired and including making connections with 3 core twisted flexible copper cable of size 23/.0076 from ceilling rose/PVC connector to light fittings. (Note power factor should not be less than 0.95) complete all as spd and directed.

Supply and fixing in replacement of Rectangular Highbay LED 90 watt with excellent heat sink along with IP66 protection complete all as specified and directed by Engr-in-charge.

S & F in replacement ceiling lights with recess/ suspended slim LED Panel 36 watt with white powder coated extruded aluminium body 36 watt, CCT 5700 complete all as specified and directed by Engr-in-charge.

S & F in repl of Slim Recess mounted square LED panel 20 watt 2 x 2 deep drawn CRCA sheet steel housing duly powder coated with high efficient LEDs & glare full opal diffuser, IP 20 to ensure glare free & even distribution of light.

M & L for providing/ cutting the round/ square hole of required size in wall finishing the same for distrubed surfaces complete all as spd and supply and fixing propeller type AC ventilating fans, Single phase, 230 volts 250 mm sweep complete and supply and grouting the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core 1.5 sqmm copper cable from ceiling rose to exhaust fan motor and writting MES No. with black synthetic enamel paint 2.0 cm high complete all as spd.

M&L in replacement for sheet metal enclosure MCB distribution board, double door with IP-43 protection single phase 240 volts 6way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed by Engr-in-charge.

S & F in replacement sheet metal enclosure MCB distribution board, double door with IP-43 protection single phase 240 volts 8 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases in wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed by Engr-in-charge.

M & L for sheet metal enclosure MCB distribution board, double door with IP-43 protection single phase 240 volts 12 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification .

M & L for MCB Single Pole 240 volts any rating from 20 to 40 amps, with rupturing capacity 10 KA, 'C' curve including providing thimble for out going cables complete all as specified and directed.

M & L for MCB SPN 240 volts any rating from 6 to 40 amps, with rupturing capacity 10 KA, 'C' curve including providing thimble for out going cables complete all as specified and directed.

M & L for earthing complete with galvanised steel earth plate electrode , 600 x600 x 6mm thick burried directly in the ground (earth pit not less than 2.25 mtr deep below ground level)with top edge of the plate not less than 1.5mtr below ground level connected to galvanised iron wire 4mm dia as earth lead by means of bolts, nuts and washers of GI up to test point , GI tubing 15 mm bore light grade protection pipe , GI watering pipe 20mm bore light grade with funnel and wire mesh, charcoal, salt packed around the earth plate including PCC chamber in PCC 1:2:4 type B-1 (nominal mix), and 3.15 mm thick MS sheet cover with suitable handle of 6mm dia MS bar and angle iron 40x40x3mm frame for cover including earth work in any type of soil , removal of surplus soil to a distance n.exc 50m and connecting , testing on completion complete all as shown on electric plate No 03 of SSR -2009 Part I complete all as specified and directed. (Note:- Excavation and earth work is deemed to be included in the rates quoted).

S & F in replacement submain wiring with two single core PVC insulated flexible copper conductor cable of size 6.0 sqmm and one single core PVC insulated flexible copper conductor cable green colour of size 4.0 Sqmm as earth lead in & including concealed PVC conduit light grade cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification complete all as specified and directed.

S & F in replacement bldg secuirty light fitting energy saving high efficiency LED street light fitting 30 Watts, 5700 K, IP 66, having pressure die cast housing with toughened glass and individual high power LEDs with secondary optics, prismatic polycarbonate cover complete including GI bracket made out of 32 mm dia light grade GI pipe 1.5 mtr long bent to shape and making connections using cord flexible 3 core copper cable of size 23/ .0076 from ceilling rose/ PVC connector to light fittings or as directed by Engr-in-chrage.

Notes :- (a) The contract sum shall be arrived at after deduction of amount of Schedule of Credit. (Rs. 87,993.00). (b) PERFORMANCE SECURITY :- (Refer condition 19 of IAFW-2249) The performance security for an amount equivalent to 5% (Five percent) of the accepted contract sum shall be delivered by the successful bidder within 28 days from the date of intimation letter of acceptance and all provisions shall be applicable as per condition 19 of IAFW 2249

M/S Raghuvanshi Builders

M/S RUDHRAKSH TRADING CO

M/S SALARIA BUILDERS

GANDOTRA CONSTRUCTION CO

M/S HEAVEN BUILDERS AND ENGINEERS

M.B TUBE AND ALLIED IND. Contr

SEALINE BUILDERS

M/S ONKAR SINGH PATHANIA

OM SAI RAM BUILDERS

R K Builders