Relocation of LT Switchgear located at 2X110 MW and associated works in BTPS PTPP

Amount

Dismantling Of old vertical and erection and installation of vertical Breaker Panel (Dismantling of 23 No. vertical and erection of 24 No. verticals) as per scope of work

Fabrication of Platform for Erecting/Placing 24 No. vertical Panels as per scope of work

Dismantling of 02 No. Air blower Installed at Battery Room of 2X110 MW as per scope of work

Supply Erection and commissioning of 05 No. single phase 0.45KW 1400 rpm and 18-inch sweep exhaust fan by making suitable arrangement on wall and cable laying and connecting to power modules as per scope of work

Fabrication of M.S. Structure (Plinth) with MS beam, channel, Plate etc for erection of 1000KVA 6.6/0.4KV Transformer after levelling and strengthening of ground along with grouting and painting with red oxide and then with standard black colour as per scope of work

Shifting and Placing of 1000KVA 6.6/0.4KV Transformer on newly fabricated plinth as per scope of work

Complete earthing of 6.6/0.4 KV transformer including supply of earthing material as per scope of work

Overhauling of 03 No. MLDB along with its Transformer as per scope of work

Commissioning of 02 no. newly installed BMCC/ACDB panel/03 No. MLDB with their Transformer/ 01 No. HT Panel/ 01 No. 6.6 KV 1000/1500KVA Transformer as per scope of work

Testing/protection checking Work of HT (01 No.)/LT (02 No.) Panels, modules, MLDBs(03 No.), Transformer(01 No.) as per scope of work

Fabrication of Canopy/shed with painting (Size 4mtr X 2.5 mtr X 2.5 mtr height approx) MLDB along with its Transformer in BOP Area as per scope of work

Fabrication of Canopy/shed with painting (Size 3.0mtr X 2.5 mtr X 2.0 mtr height approx) HT Panel installed in 2X210MW parking Area as per scope of work

Fabrication of double layer tray (0.6mtr widthX1500 mtr approx for single layer) with cover for laying of LT Power Cables of 1CX1000/800/630 sqmm & HT Power cable 3X185/150 sqmm as per scope of work

Providing new Tray cover at different location as per site requirement (2mtr X 0.6mtr each) as per scope of work

Fabrication of fencing with gate around 6.6/0.4 KV Transformer of dimensions (5mtr(length)X5mtr(width) X 2mtr (Height) approx) as per scope of work

Structural steel work also has to be done to support the fencing, with fixing, grouting channel , angle in vertical horizontal(at top and bottom of fencing) and cross manner as per scope of work

Salvaging HT Power Cables of 3CX185/150 sqmm as per scope of work

Salvaging LT Power Cables of 1CX1000/800/630 sqmm as per scope of work

Salvaging LT Power Cables of 3.5CX95 sqmm as per scope of work

Salvaging LT Power Cables of 3.5CX70 sqmm as per scope of work

Salvaging LT Power Cables of 3.5CX50 sqmm as per scope of work

Salvaging LT Power Cables of 3.5CX35 sqmm as per scope of work

Lugging and end Termination with gland of 3CX185 sqmm HT Power cable as per scope of work

Lugging and end Termination with gland of 1CX1000/800/630 sqmm LT Power cable as per scope of work

Lugging and end Termination with gland of 3CX95 sqmm LT Power cable as per scope of work

Lugging and end Termination with gland of 3CX70 sqmm LT Power cable as per scope of work

Lugging and end Termination with gland of 3.5CX50 sqmm LT Power cable as per scope of work

Lugging and end Termination with gland of 3.5CX35 sqmm LT Power cable as per scope of work

Engaging JCB/Hydra/ Jack hammer on hire basis including hire and fuel charges, operators, helpers for different type of non-measurable works as per direction of Engineer in charge complete with all respect as per scope of work

Consumables (End termination Kit, Straight through Joint Kit, wire, ferrule, lug, tape, wielding rods, nut bolts etc) as per scope of work

M/S SHYAM ERECTORS