Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.8 LAccepted-Finance 207 VIVEKANANDA ROAD BAIDYABATI SERAMPUR HOOGHLY 712223 | BAIDYABATI | HOOGHLY | WEST BENGAL | 712223 | L1 | Accepted-Finance Accepted as L1 Bidder | |
| 2 | L2₹6.7 L+₹90,164.64 (15.4%)Rejected-Finance | L2 | Rejected-Finance Rejected | |
| 3 | L3₹6.7 L+₹90,374.65 (15.5%)Rejected-Finance | L3 | Rejected-Finance Rejected | |
| 4 | L4₹7.0 L+₹1.1 L (19.3%)Rejected-Finance 106 PURUSHA MAYABAZAR DURGAPUR BARDHAMAN WEST BENGAL 713207 INDIA | PASCHIM BARDHAMAN | WEST BENGAL | 713207 | L4 | Rejected-Finance Rejected |
Tender Value
₹7.0 L
EMD Value
₹14,001
Closing Date
9 Sept 2026, 2:00 pmClosed
Executive Engineer Hooghly Highway Division No-II
Executive Engineer Hooghly Highway Division No-II pipulpati Hooghly
Emergent road painting and other traffic calming and safety measures for black spot from 29.85 Km to 30.35 Km of SH 13 (Old Delhi Road) of Chandannagar Highway Sub-Division under Hooghly Highway Division II, P.W(Roads) Dte in the district of Hooghly
2026_WBPWD_5020789_10
WBPWD/EE/HHD-II/eNIT-6/2026-27
Open Tender
CIVIL WORKS
Percentage
15 days
Hooghly
Please refer Tender documents.
6 documents required · 6 mandatory
₹14,001
Yes
23 Sept 2026
29 Aug 2026
11 Sept 2026
1 Sept 2026
9 Sept 2026
1 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Clearing and Grubbing Road Land
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness. (Reference to MoRT&H's specification clause 201)
By Mechanical Means
In area of light jungle | 0.27 | CUM | 50,632.83 | ₹13,670.86 |
| 2 | Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes (Reference to MORT&H's specification 803). | 496.18 | SQM | 622.78 | ₹3,09,010.98 |
| 3 | Retro-Reflectorised Traffic Signs:
Providing and fixing of retroreflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick,when signs with maximum side dimensions do not exceed 600mm, or with aluminium sheeting 2.0mm thick when signs with maximum side dimensions exceeds 600mm, supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing (Reference to MORT&H's specification 801). 90 cm equilateral triangle | 10 | NOS | 5,495.19 | ₹54,951.9 |
| 3.01 | 60 cm circular | 8 | NOS | 4,842.71 | ₹38,741.68 |
| 3.03 | 60 cm x 45 cm rectangular | 13 | NOS | 4,717.08 | ₹61,322.04 |
| 3.04 | 90 cm high octagon | 2 | NOS | 8,626.33 | ₹17,252.66 |
| 4 | Supplying & fixing of Raised Pavement Markers/Road Studs/Cats Eye made of polycarbonate moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face which shall support a load of 13635 kg tested in accordance to ASTM D 4280 Type H and compling to Specifications of Category A of MoR&TH Circular No. RW/NH/33023/10-97 - DO III Dt. 11.06.1997 & MoRT&H's specification for Road &Bridge Works (Fifth Rev.). Marker height shall not be less than 10 mm and shall not exceed 20 mm, width shall not exceed 130mm and with minimum reflective area of 13 sqcm on each side and slope to the base shall be 35 ± 5 degree. Fixing will be without nails but by using epoxy resin based adhesive as per manufacturer's recommendation including site clearence etc and complete as directed by the Engineer in Charge. The contractor will have to provide a test certificate from a reputable national/international laboratory comforming the above specifications. | 274 | EACH | 219.98 | ₹60,274.52 |
| 5 | Painting Two Coats on New Concrete Surfaces
Painting two coats, after filling the surface & applying a sealing primer, with synthetic enamel paint in all shades on new plastered concrete surfaces as per MORT7H's specification 803.6.2.(Reference to MORT&H's specification 803). | 532.8 | SQM | 71.37 | ₹38,025.94 |
| 6 | G.S.T. @ 18% as applicable | - | percentage | 18 | - |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.34 MB
Form2911.pdf
Other Document • 0.49 MB
SpecialTermsCond.pdf
Additional Documents • 3.86 MB
BOQ_5097588.xls
BOQ • 0.31 MB
eNIT06.pdf
Tender Documents • 1.33 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .