Special repair to E.I. and street light in Civil Hospital Meham in Distt. Rohtak.

Amount

( a ) Main Switches

Supply and erection of metal clad switches / B.D.Bs with rag bolts on wall or on existing angle iron board / pedestal including bonding to earth and necessary connections ..

31.12(a) (xiv) Cat-B Triple pole switch with neutral link 32 amp. 415 Volts

31.12 (a) (xv) Cat-B Triple pole switch with neutral link 63 amp. 415 Volts

( c ) Moulded case Circuit breakers

31.12 © Supply and erection of moulded case circuit breakers on wall or on existing pedestal including bonding to earth and necessary connections

31.12 c (i) 15 amp.to 60 amp. 415 V ,10 KA 3-phase

31.12 c (iii 250 amp. 415 V , 35 KA 3-phase

31.13 Supply and erection of M.S. angle iron frame duly welded for housing M.S. sheet & main switches etc. on it, fixed on wall by means of suiteble size of rag bolts with cement concrete ,duly painted with three coats of approved paint including one coat of red oxide.

31.13(ii) Size 40 mm x 40 mm x 6 mm

31.14 M.S.Sheet .

31.14 (i) Supply and erection of 3 mm thick mild steel sheet duly welded on existing M.S. angle iron frame for fixing the main switches etc. as required, duly painted with three coats of approved paint including one coat of red oxide.

Distrubution board with plug and socket.

31.15 Supply and erection of sheet steel enclosure 2 pole / 3 pole with earth plug and socket suitable for incorporating single pole / triple pole MCB on wall / on existing pedestal complete with necessary connections etc

31.15 (ii) S.P.N. enclosure for single pole MCB 20 amp

(L) Miniature Circuit Breaker and Isolator

31.17 Supply and erection of miniature circuit breaker / isolator 240 /415 V in the existing distribution board including making necessary connections

(a) Miniature circuit breakers of 9 KA breaking capacity

31.17a) (ii) SP MCB 6 amp. to 32 amp

31.18 Supply and erection of Fittings and Accessories

31.18 (vii) Call bell 220 / 230 volts A.C. bakelite with double coil.

31.18 (ix) (b) Bell push flush type ( without flexible wire ) in existing sheet.

31.18 (xi) Bakelite angle / straight button holder large size

31.18 (xii) Switch 5 amp. On existing sheet

31.18 (xiii) Wall socket 5 amp. On existing sheet

(P) Pipe Laying

31.21 Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required

31.21 (xxi) Heavy gauge welded conduit pipe 20 mm dia 1.60 mm thickness flushed

31.21 (xxii) Heavy gauge welded conduit pipe 25 mm dia 1.60 mm thickness flushed

31.22 (Q) Earthing

31.22(i) Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required

31.22(ii) Extra for using salt and charcoal / coke for pipe earth electrode as required

31.22(xii) Pdg. and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as required

31.22(xvi) Pdg. and fixing 4.00 mm dia G.I.wire on surface or in recess for loop earthing as required

31.26 Supply and erection of under ground cable ,loose in existing pipe or trenches complete with necessary connections

31.26 (xxv) Ard. 25 Sq. mm 3.5 Core Cable

31.26 (xxxix) Ard. 16 Sq. mm 4 Core Armoured Cable

31.26 (xIi) Ard. 25 Sq. mm 4 Core Cable

31.3 ( T ) Street Light

(IV) Supply and erection of weather proof M.S.Box of size 20 cm x 15 cm x 10 cm. covered with 3.00 mm thick M.S.sheet hinged cover, locking arrangemrnt , housed in wall , including the cost of 1 no. 16 Amp.. 415 volts kit-kat and 2 nos. 63 Amp.. 415 volts neutral links fixed on hard wood board in the M.S.Box including painting and necessary connections

Pedestal

31.33 Supply and erection of Godrej Almirah typeM.S.pedestal made of 50 mm x 50 mm x 6 mm angle iron frame with 3.00 mm thick M.S.sheet covering including shutters with suitable hinges and locking arrangement with Godrej type handle including round bars

31.33 (ii) M.S.pedestal of size 750 mm wide , 900 mm high , 300 mm deep and bottom totally open , duly embeded in cement concrete block of size 900 mm x 450 mm x 200 mm above ground level duly plastered with 12 mm thick 1:4 cement plaster , having a base of size 1050 mm x 600 mm x 250 mm below ground level

Wiring in existing conduit pipe (Recessed) for Electrical points

31.38 Wiring only in 1.5 Sqmm PVC insulated copper conductor cable in existing conduit pipe and MS boxes covered with 5mm thick bakelite sheet including cost of switch, wall socket, ceiling rose etc.

31.38 (I) Fan Point

(b) Medium Point

(c) Long Point

31.38 (II) Light Point

(a) Short Point

(b) Medium Point

(c) Long Point

31.38 (VI) Call bell point

© Long point

31.38 (VII) 3 pin 5 amp. plug point including earthing the 3rd. pin etc

(a) Short Point

(b) Medium Point

(c) Long Point

31.38 (VIII) 3 pin15 amp. plug point with 4 sq mm PVC insulated Copper conductor cable- including earthing the 3rd. pin etc

© Long point

31.40 Supply and erection of PVC unsheathed copper conductor cable single core 1100 volts grade in pipe of suitable size excluding cost and erection of pipe

31.40 (i) Size 1.5 sqmm ( 3/0.81 )

31.40 (iii) Size 4 sqmm ( 7/0.85 )

31.40 (iv) Size 6 sqmm ( 7/1.05 )

31.41 Supply and erection of Double door sheet steel enclosure distribution boards suitable for MCB's & ELCB's recessed in wall including bonding to earth complete with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work.

31.41 (v) 4-way , TP&N ( Horizontal) (8+12)

31.41 (vi) 8-way , TP&N ( Horizontal) (8+24)

31.41 (v) 12-way, TP & N (Horizontal) (8+36)

31.44 Supply and erection of PVC pipe ISI marked ( Medium ) recessed in wall / ceiling etc. including the cost of PVC bends , inspection boxes , iron hooks and cement concrete etc. complete in all respect upto the entire satisfaction of Engineer-in-charge of work

31.44 (i) 20 mm dia

31.48 Supply and erection of MS Saddle and clamps duly galvanised , on wall / RCC parapit for fixing underground cable at a distance of 0.60 metre center to center fixed by means of rawl plug including the cost of all labour and material required to complete the job in all respect and upto entire satisfaction of the Engineer-in-charge of work

31.49 Supply and erection of MS box made of 16G MS Sheet recessed in wall, with arrangement of fixing brass screws including cost of 2 Nos. checknuts of required size and one no. PVC bush for each pipe including all labour and material required to complete the job in all respect up to the entire satisfaction of Engineer-in-charge of work

31.49 (i) With 2 coats of primer

31.51 Supply and erection of MS stand made of 50mmx50mmx6mm angle iron frame and 150cm long, 30cm wide with MS sheet covering size 30cmx30cm 3.15mm thick fixed on the top of board & legs duly embedded in 1:2:4 cement concrete block 30cm below ground level including the cost of cement sand, welding, painting & fabrication charges etc. up to the entire satisfaction of Engineer - in - charge of the work

31.55 Supply and erection of socket size rotary step type electronic regulator for A.C. Ceiling fan Anchor Make Deluxe Model No. 50440 ISI / SSK make PC 561 operated on 120 /280 Volt A.C. Supply complete including cutting of existing bakelite sheet and making necessary connection etc. upto the entire satisfaction of Engineer-in-charge of work

31.63 Supply installation testing and commissioning of wall/free standing floor mounting dust & vermin proof compartmentalized cubical panel made out of 2mm thick CRCA sheet, required hardware 3mm thick bakelite sheet provided all along the bus bar cable alley separating switches compartment and supporting cutable channel duly painted by 2 coat of Zinc/ Red Oxid primer having PU/Neoprene rubber gasket of not less than 3mm thickness separate detachable gland plate MS base channel hinged door with inter locking arrangement for equipment/switch wear.

31.64 Supplying and fixing of copper bus bar duly tinned by means of SMC/DMC type insulator high tensile nuts and boltes spring washers fixing to same in existing panel including bending, cutting in required shape and size and insulation with colour coding heat shrinkable PVC insulation Complete in all respect

31.66 Supply & fixing of rotary handle for on/off operation of existing MCCB in the LT panel including fixing the same in position with all labour and material requied to complete the job in all respect

(i) Rotary handle upto 125 Amp. MCCB

(ii) Rotary handle above 125 Amp. MCCB

31.67 Supply and erection of mark double walled corrugated (DWC) HDPE pipe laid 1Mtr. Below ground level including diging and refilling of earth including cost of sutiable size socket/cuppler for HDPE pipe including the cost of labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work

(ii) HDPE pipe 63/50 mm outer dia/inner dia

31.68 Supply and Erection of Hot Dip Galvanized octagonal pole of 3mm thickness with base plate including cost of nut and bolts and all accessories as supplied by the manufacture including cost of foundation accessories etc. The foundation bolts as per manufacturer design should be hot dipped galvanized pole complete with door locking arrangement. Terminal plate consisting of 2 Nos. 100 A, 4 pole natural links including connectin etc. with suitable connecting arrangement for 2 No. MCBs/ Kit Kat including cost of R.C.C 1:1 5:3 for foundation of size 0.7M x 0.7 M x 1.8 M with minimum 8 Nos. 12 mm dia longitudinal MS reinforcement rods with rings of 8mm dia not more than 200mm C.C for fixing the pole with all labour & material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work.

(i) 7 Mtr. Long pole with top dia 70mm and bottom dia 130 mm with base plate of size 220x220x12mm

M.R. items

NS-1 S&E of AC ceiling fan 48" ISI Mark Size without Regulator complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work. Make:- Bajaj / Orient / Crompton / Usha

NS-2 S&E of AC ceiling fan 56" ISI Mark Size without Regulator complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work. Make:- Bajaj / Orient / Crompton / Usha

NS-3 S&E of Exhaust fan 300 mm sweep industrial heavy duty 900 RPM of approved make including the cost of all petty material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work. Make:- Bajaj / Orient / Crompton / Usha

NS-4 S&E of LED fitting 1x18 watt with all accessories supplied by the manufacturer to complete the job in all respect upto entire satisfaction of Engineer-in-charge of the work. Make Havells / Wipro / HPL / Philips / C&S Electric

NS-5 Supply & erection of M.S. Box made of 16 Gauge of size d 8" x 10" x 4" covered with3 mm thick bakelite sheet white colour of ISI Mark fixed by means of 4 Nos. brass screws with cost of 1 No. 15 Amp. multi socket of ISI Mark and 15 Amp. switch and 3 Nos. 5 Amp. multi-socket with 5 Amp. switches of ISI Mark complete the job in all respect upto the entire satisfaction of Engineer-in-charge of the work. (Based on HSR)

NS-6 Supply and Erection of LED flood light fitting Havells Make JETA-AIRISFLS150W or its equivalent model of Wipro LF20-192-060-57-XX / Philips make BVP122 LED146 CW FLNB FG XTFC / Surya SLE FL 150W IP66 / C&S Electric LTEF150WHPLED with pressure die cast alluminium housing, IP-66 reflector and enclosed with toughened glass with all accessories as supplied by the manufacturer including cost of all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work

NS-7 Supply and Erection of LED street light lumanaries of Havells make Endura PLEARL NEOSL 60W LED or its equivalent make of Wipro make LR02-671-xxx-57-xx / Philips make BRP409LED 060CW / C&S Electric LTESST60WLED/LS with die cast housing, toughened glass IP66 with all acessories as supplied by the manufacturer with all labour and material required to complete the job in all respect upto the Entire Satisfaction of the Engineer-in-Charge of the work.

NS-8 Supply & Erection of Single arm bracket made of 40mm dia G l pipe B class lSl 1.25mtr. Long with coller pipe (Gl) 75mm dia 60 cm Long top covered with ornamental cap duly welded painted 2 coats of aluminum paints on bracket and golden paint of ornamental cap including the cost of labour and petty material etc. complete in all respect up to the entire satisfaction of Engineer-in charge of the work

NS-9 S/E of sheet steel enclosure distribution board ( Havell's / Standard make ) G Frame 4 Poles recessed in floor / wall / or pedestal suitable for MCCB's including bonding to earth with all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-charge of the work.

DEVENDER KUMAR CONTRACTOR

INFERNO POWER AND SAFETY