NIT-42 of 2020-21 PROVN OF WAITING SHED, HARDSTANDING, SEPTIC TANKS, WATER STORAGE TANK AND ALLIED INFRASTRUCTURE AND ADDN/ ALTN TO BLDG NO T-24 UNDER AGE B/R CIF (D) UNDER GE (I) 873 EWS

Amount

B/R Portion

Excavating in any type of soil for post holes (or similar holes) each not exceeding 0.5 cum and getting out and removing surplus soil to a distance not exceeding 50 metre complete all as specified and as directed.

Plain Cement concrete type C-2, 1:3:6 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete, complete all as specified and directed.

Mild steel rolled work as in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) confirming to Fe-410-W (Gde-E-250) quality-B complete all as specified and directed.

Rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed threaded top) of colour other than black, hoisted and fixed in position, including over flow and drain out pipe complete of 1000 litre capacity complete all as specified and directed.

Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 20mm, complete all as specified and as directed.

Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 15mm, complete all as specified and as directed.

Gun metal globe or gate valve with iron wheel heads, screwed both ends for 15mm dia bore iron pipe complete all as specified and as directed.

Gun metal globe or gate valve with iron wheel heads, screwed both ends for 20mm dia bore iron pipe complete all as specified and as directed.

Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed to 20mm bore dia of pipe (Minimum weight 210gms), complete all as specified and directed.

Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint, over a coat of red oxide primer, complete all as specified and as directed.

Excavating in trenches, not exceeding 1.5metre wide and not exceeding 1.5metre depth for foundation, etc., and getting out in any type of soil, complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick any type of soil, complete all as specified and directed.

Removing excavated soils to a distance exceeding 50m but not exceeding 100m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Plain Cement concrete type D-2, 1:4:8 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete, complete all as specified and directed.

Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6m mean radius built in in CM 1:4, complete all as specified and directed.

Plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in cills, lintels up to 1.5 metre clear span, steps, seismic and other similar band, plinth course, string courses, lacing courses, parapets and railing up to 60cm in height, copings, kneelers, apex stone, bed plates, kerbs etc and in similar works including weathering, slightly rounded or chamfered angles and throating and necessary form work complete, all as specified and as directed.

Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified.

Precast reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in cover slab for manholes set in cement mortar 1:4 complete all a specified and as directed.

TMT bars 6 to 8mm dia, cut to length bent to shape including binding with MS annealed wire of dia not less than 0.90 mm, complete, all as specified and as directed.

Salt glazed stone ware (SGSW) drain pipes of grade 'A' 150mm bore laid in trenches and jointed on concrete bed complete all as specified and directed.

Concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested, for 150mm bore of pipe plain cement concrete 1:4:8 type D-2 (Using 40mm graded stone aggregates) complete all as specified and directed.

PVC pipes, single socketed, in any length of 110mm bore with rubber ring joints, laid in trenches or floors or fixed to walls, complete all as specified and directed.

Extra for forming fair finished drain or channel/manhole inner surface 30 cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stopped ends etc., complete all as specified & directed.

Septic tank for 25 users, Brick construction with top of slab at ground level including necessary excavation and earth work in any type of soil and disposal of surplus soil to a distance not exceeding 50 metres, vent pipe, supplying and fixing RCC precast manhole cover having 6mm plate embedded all around / fibre reinforced cover with angle iron frame vent shaft and sludge chamber etc., all as specified and shown in Drawing No CE/TD-1202/03 Sheet 1/2 & 2/2.

Soakage well 1.20m internal dia and 3.00m depth including excavation in any type of soil, PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in footing stone honey comb / solid masonry in cement 1:4 RCC (M-25 design mix) cover slab filled with brick bats including intercepting chamber screen chamber and disposal of soil complete all as specified and shown on Drawing No CE/TD-1202/03 Sheet 1/2 & 2/2.

Soakage well 1.80m internal dia and 3.00m depth including excavation in any type of soil, PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in footing stone honey comb / solid masonry in cement 1:4 RCC (M-25 design mix) cover slab filled with brick bats including intercepting chamber screen chamber and disposal of soil complete all as specified and shown on Drawing No CE/TD-1202/03 Sheet 1/2 & 2/2. Note for Serial Item No 24 to 26 : 1. During excavation if unexpected water is encountered, the same shall be bailed out / de-watered by the contractor mechanically or manually without any extra cost. 2. The excavated surplus soil shall be removed to a distance exceeding 500mtr and not exceeding 1500mtr and deposited where directed.

RCC M-25, design mix, using 20mm graded crushed stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, complete all as specified and as directed.

RCC M-25, design mix, using 20mm graded crushed stone aggregate as in columns, pillars, piers, posts and struts, complete all as specified and as directed.

RCC M-25 (design mix) in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.

RCC M-25 (design mix) in chajjas, complete all as specified and as directed.

RCC M-25 (design mix) in as in slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified & directed.

Formwork to sides of concrete foundation, footings, bases of columns, rafts and raft beams and similar work; vertical or to batter for rough finished surfaces of concrete, complete all as specified and as directed.

Formwork to sides of pillars, posts, struts, columns (square, circular rectangular on plan or polygonal etc. for rough finished surfaces of concrete, complete all as specified and as directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for rough finished surfaces of concrete, complete all as specified and as directed.

Formwork to sides and soffits of chullah hoods, chajjas, troughs and similar items including edges, complete all as specified and as directed.

Formwork to sides and soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping), complete all as specified & directed.

TMT bars 10mm dia and over, cut to length bent to shape including binding with MS annealed wire of dia not less than 0.90 mm, complete, all as specified and as directed.

TMT bars 6 to 8mm dia cut to length bent to shape including binding with MS annealed wire of dia not less than 0.90 mm, complete, all as specified and as directed.

TMT bars 5mm dia and over as in stirrups, cut to length bent to shape including binding with MS annealed wire of dia not less than 0.90 mm, complete all as specified and as directed.

75mm thick, plain cement concrete 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection etc., finishing surface even and smooth without using extra cement including making joints with bitumastic filling in proportion of bitumen and sand 1:3 by weight complete as specified and directed. Note : The concrete shall be laid at a stretch not exceeding 3.0m in length and joint shall be made at every turning / corners, complete all as specified and directed.

Hard core of broken stone gauge exceeding 63mm and not exceeding 100mm deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surfaces, complete, all as specified and as directed.

75mm thick PCC 1:4:8, type D-2 (using 40mm graded crushed stone aggregate) as in sub base of flooring finished even and rough, to receive floor finishes, complete all as specified and as directed.

25mm thick PCC 1:2:4, type B-0 (using 12.50mm graded crushed stone aggregate) as in floor, finished rough to receive tiles above, complete all as specified & directed.

20mm to 25mm thick of size not less than 53 x 53cm, machine cut Kota stone slab flooring laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror finish polishing, over and including 15mm thick screed bed or bedding layer of cement mortar 1:4 all as specified and as directed.

16mm to 18mm thick, machine cut Kota stone as in riser or steps, skirting, dado and pillars laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and rounding off edges complete with mirror finish polishing, over and including 10mm thick backing coat of cement mortar 1:3 all as specified and as directed.

Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6m mean radius built in in CM 1:6, complete all as specified and directed.

Powder coated aluminium anodised frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc., (minimum thickness of powder coating 50 micron), complete all as specified & directed.

Powder coated aluminium door shutter fixed type without sash bars, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, hinges, anodised aluminium snap beading screws etc. complete all as specified, complete all as specified & directed.

Powder coated aluminium window and ventilator shutter fixed type without sash bars, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, hinges, anodised aluminium snap beading screws etc. complete all as specified, complete all as specified & directed.

Door closer aluminium die cast body, hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) 250mm, and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.

Aluminium anodized barrel tower bolt of extruded section and fixed complete of Size 150mm long complete all as specified and directed.

5.5mm thick sheet glass ordinary quality and glazing with oil putty / rubber packing around the glass, in square exceeding 0.5 Sqm in each pane complete all as specified and as directed.

4.0mm thick sheet glass ordinary quality and glazing with oil putty / rubber packing around the glass, in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

Mild steel rolled work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastening and heavy bracket framing (beam, tee, angle, square / rectangle sections, channel or flat section) including distance pieces, cleats etc. confirming to grade FE 410-0 complete all as specified and directed.

Mild steel plates (plain or chequered) channel, square cut or notched (Ordinary and counter sunk) forming holes, without any attachment as in gusset plates all as specified and directed.

Pre-painted galvalume aluminium zinc coating G.I based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering/wall cladding, fixed with self taping screws, complete all as specified and directed.

Pre-painted galvalume aluminium zinc coating G.I based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering / cladding to wall, fixed with self taping screws, complete all as specified and directed.

S/F 4 mm thick asbestos cement plain building boards in false ceiling on aluminium snap grid work 60 x 60 cm with using 36.5mm x 23.5 mm x 1.5 mm thick main tee, 23.5 x 23.5mm x 1.28 mm cross tee and 25x25x1.5mm angles fixed to perimeter of wall including necessary supporting hanger with 3 mm dia GI wire and J bolts washer nuts for securing frame work to ceiling suspended @ 120 cm c/c both ways, size of grid shall be 610x610mm including three coats of white wash over prepared surface

20mm thick Granite tiles, machine cut (table rubbed and polished) in skirting/dado in steps, risers, jambs, pillars, window cills, cooking platform bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone over and including 15mm thick screed bed in cement mortar 1:4 finished fair to received the granite including rounding the exposed edges, complete all as specified and directed.

Preparation new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer over, complete all as specified and as directed.

Preparation new plastered surfaces of walls and applying two coats of cement base paint including one coat of cement based primer complete all as specified and directed.

Surface Excavation not exceeding 30cm deep and averaging 15cm deep and getting out in any type of soil, complete all as specified and directed.

Taking down chowkhats with shutters (without taking off shutters from the frames exceeding 1.50 Sqm and not exceeding 4.00 Sqm each, including cutting holes for taking out hold fasts or dismantling brick work and making good the disturbed surface complete all as specified and as directed.

Taking down chowkhats with shutters (without taking off shutters from the frames not exceeding 1.50 Sqm each, including cutting holes for taking out hold fasts or dismantling brick work and making good the disturbed surface complete all as specified and as directed.

Aluminium anodized barrel tower bolt of extruded section and fixed complete of Size 200mm long complete all as specified and directed.

Aluminium handle cast type anodized of size 150mm complete all as specified and directed.

Butt hinges, medium weight, cold rolled mild steel, 100mm size, complete all as specified and directed.

Pressed steel frame of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc., complete all as specified and directed.

35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete as specified and directed.

PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in back filling of pressed steel door frames and in bed block for holdfast and similar works etc. complete all as specified and directed.

Dismantling wall and ceiling board (fibre, pulp, PVC, insulation etc.) or insulation boards / slabs / blankets, any thickness including cover fillets complete all as specified and as directed.

2nd class hardwood in scantling clean sawn timber framed and fixed complete all as specified and directed.

12mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work all as specified and directed.

Taking up or down 15mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specified and as directed.

Taking up or down 20mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specified and as directed.

Stop cock / Angle valve with adjustable wall flange CP cast copper alloy, fancy type, with capstan head handle and adjustable wall flange, screwed down, high pressure screwed both ends for 15mm bore iron pipe or for unions, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise specifically provided for, complete all as specified and as directed.

5mm thick aluminium sheet securing with rubber packing around the sheet, in any size complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting any gauge, thickness including nanital or similar pattern from roof covering or in ridges, hips, valley gutter and similar works complete, all as specified and directed.

Galvanised, corrugated mild steel sheeting, with two corrugation side lap fixed with 'L' type or 'J' type or cranked hooked bolts with washers in roofs, 0.63mm thick, Gde-O quality, with 120grams/sqm zinc coating and Gde 'B' (i.e. 12.5 mm) corrugation complete, all as specified and as directed.

Taking down cement plaster on bricks or stone wall/ceiling decayed surfaces of concrete from roof projection or RCC chajjas etc. including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed.

Demolition of cement concrete in ground floors and paving (un-reinforced) not exceeding 15cm. thickness, below or above ground level, complete and removing rubbish from the site, complete all as specified and directed.

Precast cement concrete coloured glazed interlocking tiles 60mm thick conforming to IS-15658, any shade, colour and pattern laid over and including 20 to 30mm thick stone dust / sand cushioning laid dry to the profile including vibrating with surface vibrator after laying of tiles including budding and filleting joints etc. complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed.

Vitrified coloured tiles of size 596mm x 596mm x 9 to 10mm thick as in floors etc. bedded & jointed in neat cement slurry over and including 15mm thick screed bed in CM 1:4 and pointed in coloured cement to match the colour of tile all as specified and directed.

Preparation of new wooden surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed.

Preparation of old steel surfaces of any description, over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.

Rough excavation not exceeding 1.5m deep in any type of soil and getting out, complete all as specified and directed.

Plain Cement concrete type E-2, 1:5:10 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete, complete all as specified and directed.

100mm thick, plain cement concrete 1:2:4, type b-1 (using 20mm graded crushed stone aggregate) as in floor, path, hardstanding etc. etc., finishing surface even and smooth without using extra cement including use and waste of formwork to divide the area into panels, complete as specified and directed.

Forming contraction joint (dummy joint) 65mm deep x 10mm wide filled with sealing compound grade `A' all as specified and as directed.

Forming construction joint 30mm deep x 10mm wide filled with sealing compound grade `A' all as specified and as directed.

Factory made (rectified) precast concrete designer chequered tiles any colour, shape and size not less then 300mm x 300mm x 20mm thickness (compressive strength not less than 250 Kg/Sqm), pointed with grey cement and pigment over and including 20mm thick CM 1:6 screed bed or bedding layer complete.

Walling of random rubble stone masonry, well bonded, bedded and solidly hearted built in cement mortar 1:6, brought up to courses, complete all as specified and directed. Note : Volume of PCC bond stone provided in lieu of Stone bond stone under Serial item No. 94 here-in-after shall be deducted from total cumulative quantity of stone masonry.

Precast cement concrete, type C-1 1:3:6 (using 20mm graded crushed stone aggregates) as in bond stone set in cement mortar 1:6 and finishing exposed surfaces including necessary form work, complete all as specified and as directed.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought up to courses with maximum depression on face from straight edge held against the dressed surface not exceeding 40mm, complete all as specified and as directed.

Raised pointing to random rubble masonry, uncoursed or brought up to courses in cement mortar 1:4, complete all as specified and directed.

External wall cladding tiles, made of natural slate with split face, size 600mm x 150mm x 10mm thick or as approved, colour, pattern as approved, laid over and including 10mm thick backing coat in CM 1:3, finished fair to received the tile, complete all as specified and directed. Make : Kajaria / Somany / H&R Jhonson / NITCO.

Preparing newly plastered or unplastered surfaces of wall and applying two coats of exterior emulsion paint over a coat of primer complete all as specified and directed.

Writing letters or figures (Block. Roman, Italic or Indian) n exc. 30 cm high, complete all as specified and directed.

Stops, commas, short lines, dashes, hyphens, brackets, etc., complete all as specified and directed.

E/M Portion

Taking out carefully copper / aluminium point wiring, (Light, fan, socket or power) complete with all fitting, fixtures such as switch socket out let, ceiling rose, holder, regulator, DB's etc. including making good the disturbed surface of wall/floors, complete all as specified and as directed.

Point wiring with multi stranded copper conductor of size 1.5Sqmm PVC insulated unsheathed FRLS cable in and including PVC casing and capping and accessories of suitable size for concealed wiring including 1.50 Sqmm copper earth wire (green colour) FRLS Cable for one light point or fan point or bell point controlled by one No, one way switch using cable of different insulation colour for colour coding including 3mm thick laminated sheet cover, mild steel sheet or cast iron boxes including making good to disturbed surfaces of wall / floor, complete all as specified and as directed.

All as per the description of Serial Item No 104 here-in-before but for one 3 pin socket outlet 5 Amp independent, complete all as specified and as directed.

All as per the description of Serial Item No 104 here-in-before but for one 3 pin socket outlet 5 Amp on same board, complete all as specified and as directed.

All as per the description of Serial Item No 104 here-in-before but for one 3 pin socket outlet 15 Amp independent board using cable of size 4.0 Sqm with 2.5 Sqmm copper conductor in green colour for as earth continuity conductor all as specified and directed.

Switch piano, flush type, 5 Amps, single pole, one way, complete all as specified and as directed.

Switch socket outlet combination universal type, 2 in 1, 3 pin 5 and 15 Amp, piano flush type, 240 volts, complete all as specified and as directed.

Socket out let 2 in 1, 3 pin 5/6 Amp, flush type, 240 volts, complete all as specified and as directed.

Ceiling rose surface bakelite three terminals 240 volts complete all as specified and as directed.

Ceiling Fan 1200mm sweep, five star energy saving BEE rating, and making connection with three core 23/0.0076 size twisted flexible copper conductor cable upto ceiling rose complete all as specified and directed. Make : Havells / Bajaj / Usha / Crompton / Khaitan.

Electronic fan regulator stepped type with five step 240 volts 100 watt suitable for 1200mm / 1400mm sweep AC ceiling fan, complete all as specified and as directed.

Tube light fitting box type suitable for and including LED 20 tube Rod 4' long with decorative colour in polycarbonate housing and all accessories pre-wired and making connections with three core copper flexible cable of size 23/0.0076 from ceiling rose to PVC connector to light fitting complete all as specified and as directed. Make : Havells 'E-Lite LED Curve' Cat Part No LHEXBXPNIN1W020 or equivalent in Philips / Wipro / Crompton / Syska

Bulk head luminaries complete with all accessories suitable for and including 1 x 10 Watts LED lamp including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230 Volts 50 Hz complete all as specified and as directed. Make : Havells Cat Part No LHEOAOP7UZ6W010 / Crompton Cat Part No LBHE-10-CDL

LED recess luminaries, with high brightness SMD LEDs as light source, suitable for Armstrong / Grid ceiling, 2' x 2' size, 34 / 36 Watts including making connection from ceiling rose to fitting with PVC insulated sheathed flexible copper conductor cable of size 0.75 Sqmm complete all as specified and as directed. Make : Havells Cat Part No PLUTONEO2X2PLR34WLED857S or equivalent in Syska / Wipro / Philips / Crompton

Recess mounted LED Downlighter with aluminium housing 12 Watts with all accessories prewired, including any cutting / alteration to false ceiling as required for housing the downlighter complete all as specified and as directed. Make : Crompton 'CROM SQUARE' Cat Part No LSDN-12-CDL/TL/WW or equivalent in Havells / Wipro / Philips / Syska

Recess mounted LED Downlighter with aluminium housing 18 Watts with all accessories prewired, including any cutting / alteration to false ceiling as required for housing the downlighter complete all as specified and as directed. Make : Crompton 'CROM SQUARE' Cat Part No LSDN-18-CDL/TL/WW or equivalent in Havells / Wipro / Philips / Syska

Sand cushioning to underground cables using new dry river sand laid in trenches 8cm thick below the cable and 15cm thick above the cable after laying and stretching the cable complete, punned to 18cm, complete all as specified and directed Note : Punned thickness of 18cms shall be measured for payment.

Supply and laying brick covering with width equal to length of bricks as mechanical protection to underground cable using old size sub class 'B' bricks, laid flat size 230mm x 115mm x 75 mm with width of brick perpendicular to length of cable, all as specified and as directed.

XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 16 Sqmm 2 core including taking down/up unserviceable cable and making good disturbed surfaces, complete all as specified and directed.

Steel pipe galvanised light grade, 40 mm bore laid in trenches or under ground/floor or road of fixed with pole for protection of cable including GI clamps with bolts nuts and washers complete all as specified and directed.

Sheet metal enclosure factory made single door for DB 240 volts with 200 Amps rated bus bar, neutral link, earth bar and din rail SPN 12 Way including taking down and making good disturbed surfaces of walls, complete all as specified and as directed.

Sheet metal enclosure factory made double door for DB 240 volts with 200 Amps rated bus bar SPN 4 Way complete all as specified and as directed.

MCB SP 6 to 32 Amp 10 KA 'C' Series, complete all as specified and as directed.

MCB SPN 6 to 32 Amp 10 KA 'C' Series, complete all as specified and as directed.

1100 Volt grade heavy duty cable PVC Insulated aluminium conductor, served with inner sheathing of PVC tape and over all PVC sheathed in service connection suspended by insulating hanger not more than 1 mtr apart including 4 mm suspension wire, one twin core cable flat or circular 25 sqmm stranded conductor, including taking down old unserviceable service connection complete all as specified and directed.

Earthing complete with galvanized mild steel earth plate electrode size 600mm x 600mm x 6mm thick buried directly in ground (preferably in vertical position) earth pit not less than 2.25 meter below normal ground level with top edge of the earth plate not less 3 meter (BGL) connected to galvanized iron earth lead wire 4mm dia by means of bolts, nuts, check nut and washer of galvanized iron including PCC pit in RCC 1:2:4 type B-1, precast RCC cover with suitable handle, excavation and earth work in any type of soil, 20mm bore “medium grade” galvanized iron water tubing fixed with cast iron funnel and wire mesh and 15mm bore “light grade” galvanized iron protection pipe for earth lead wire upto 5m length, charcoal, common salt, complete all as shown in EP No 3 of SSR 2009 Part-I, connected to test point complete, all as specified and testing on completion.

M/S RAJINDER GOODS TRANSPORT CARRIER

GENESIS INDIA

Bidder Name

GENESIS INDIA

M/S HAJI MOHD SHAFI AND SONS

M/S RAJINDER GOODS TRANSPORT CARRIER