Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.5 LAccepted-AOC SHOPING COMPLEX CHANDIPUR BALASORE 756025 | BALESHWAR | ODISHA | 756025 | L1 | Accepted-AOC Being Lowest and reasonable | |
| 2 | L2₹35.2 L+₹2.6 L (8.13%)Rejected-Finance PASCHIM BHAGABANPORE DARUA CONTAI PURBA MEDINIPUR 721401 | PURBA MEDINIPUR | PURBA MEDINIPUR | WEST BENGAL | 721401 | L2 | Rejected-Finance Not being lowest | |
| 3 | L3₹35.7 L+₹3.1 L (9.65%)Rejected-Finance | L3 | Rejected-Finance Not being lowest | |
| 4 | L4₹35.9 L+₹3.4 L (10.3%)Rejected-Finance SRIKONA CHANDIPUR BALASORE 756 025 | BALASORE | BALASORE | ORISSA | 756025 | L4 | Rejected-Finance Not being lowest | |
| 5 | L5₹36.6 L+₹4.1 L (12.5%)Rejected-Finance | L5 | Rejected-Finance Not being lowest |
Tender Value
₹32.9 L
EMD Value
₹65,800
Closing Date
22 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE I R and D Chandipur
GE I R and D Chandipur Post Chandipur PIN 756025
PROVN OF CERTAIN REVENUE MINOR WORK AT ITR CHANDIPUR
2022_MES_540500_1
8736/CDP
Open Tender
Civil Works
Item Rate
180 days
Chandipur
As per tender documents
8 documents required · 8 mandatory
₹500
GE I R and D Chandipur
₹65,800
Yes
5 Nov 2022
23 Jul 2022
24 Aug 2022
23 Jul 2022
22 Aug 2022
16 Aug 2022
Amount
NOTE (Applicable for all items) :- The bidders/contractors are advised to read tender document & all corrigendum / amendments and General conditions of contracts before entrying/quoting the rates.
Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil.
Excavating over areas n. exc 1.5m deep and gettting out in soft/loos soil
Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, n exc 10 sq m on plan and n exc. 1.5m in depth and getting out.
Returning filling in sort/loose soil incl speading ,levelling, watering, and well ramming in layer not exc 25 cm th
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point
Boring holes for 300mm dia pile and 10 m deep in soil for under-reamed piles and getting out and disposal of spoil to a distance of n exc. 50 m.
Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level), and removal of debries from site complete all as specified and directed by Engineer-in-charge.
M & L for Type B2 (1:2:4) using 40mm graded stone aggregate as in foundation filling mass concrete.
M&L Cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregate as in copings, bed plates, kerbs, and the like including all as specified and directed .
PCC (1:4:8) type D2 (40 mm graded aggregate) cement concrete in foundations, filling and mass-concrete
M&L for RCC 1:2:4 type B1 as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete
M&L RCC 1:2:4 type B1 using 20mm graded aggregate as in Columns, pillars, piers, posts and struts all as specified
M&L RCC 1:2:4 type B1 using 20mm graded aggregate as in Beams, cantilevers, bressummers, lintels all as specified
M&L for RCC M 30 (Using 20mm Graded aggregate) design mix fo foundation,incl afts,footings,foundation beams,plinth beams,bases of column, under reamed piles etc and mass concete,
M&L for RCC M 30 (Using 20mm Graded aggregate) design mix for columns,pillars,posts and struts.
M&L for RCC M30 (Using 20mm Graded aggregate) design mix fo beams,cantileves,lintel over 1.5 m span
M&L for RCC M 30 (Using 20mm Graded aggregate) design mix for slabs suppoted on wall/beams and columns.
M&L for RCC M 30 (Using 20mm Graded aggregate) design mix for chajjas.
M&L for percast RCC cover slab type B1 1:2:4 set in CM 1:4 (150mm thick)
M&L for form work to sides of concrete foundations,footings,bases of column,raft and raft beam , side and soffits of foundation and plinth beam and similar work vertical or to batter.
M&L for form work to sides of pillars, posts,struts,columns and stanchions ough finished square or rectangular section.
M&L for fom work ough finished to sides and soffits of roof beam,girder,beam haunching, lintels, cantilevers, etc
M&L for form work to soffit of suspended slabs such as roof slabs,floor slabs,landing avd similar wok.
Formwork to edges of concrete flats, treads, breaks in floors, window cills, and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide
S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending, spirally fo hooping fo hooping for columns,incl mild steel wire annealed not less than 0.9 mm dia o securing with clips.
All as per Item No. 1.025 but stirrups,spaces and binders.
S&F Band,straps,support of stays rain water pipe ,ventilator pipe incl bolts if required. Hooks, clmps, hold fast,wall ties, hooks for hanging fans,plain angle cleats for securing purlins to wood trusses or rafters, two way or three way straps plate washer similar small articles conforming to Fe 290, Gde E-215 .
S&F Framed work such as grills, gates, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts with ornamental and intricate design and similar work conforming to Fe.290.Gde-E-165.
S&F for Mild steel, plain, black sheet in wall cladding of 1.60mm thick , steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required.
S & F Framed work such as grills, gratings, framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165
S&F for Rolled sections/Tubular MS pipes as in cross beams, hip and jack rafters, vertical posts, purlins where connected to commonn rafters fixed with angle cleats or similar work including welding and all necessery works complete all as specified
S&F Pre-laminated galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of colour having tensile strength of 550 Mpa as iin roof covering/cladding to wall, fixed with self tapping screws as specified
All as per Sl Item No. 1.032 above but plain steel sheeting as in ridges/ facia/ vally gutter and similar work
M&L for brickwork with old size sub class 'B' brick straight or curved on plan exc 6m mean radius built in CM 1:6
M & L for Brickwork with fly ash bricks, old size bricks straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and as directed.
M&L for brickwork with old size sub class 'B' brick straight or curved on plan to any radius in half brick wall built in CM 1:4
Cutting openings, through brick/block walls built in cement mortar for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc. 50m
Cutting chases in concrete block walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing etc., and making good, cutting not ecx 10 cm girth
Forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work in CM 1:4 complete
Roughening of surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all specified and directed.
Taking down cement plaster from brick or stone walls etc incl. racking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed.
M & L for providing 15 mm thick rendering with cement mortar 1 : 6 finished even and smooth (without using extra cement).
M&L for rendering 15 mm thick in cm 1:4 on fair faces of brick work or concrate wall surfaces & finishing the surfaces fair and even without using extra cement.
M & L for providing 15 mm thick rendering in two layers, Ist layer of 10 mm thick and 2nd layer of 5 mm thick rendering with mixing of WPC as per manufacturer's instruction with cement mortar 1 : 4 finished even and smooth (without using extra cement) complete all as specified and directed (WPC will be measured and paid separately).
M&L for rendering 10 mm thick in cm 1:6 on fair faces of brick work or concrate wall surfaces & finishing the surfaces fair and even without using extra cement
M&L for rendering 5 mm thick in cm 1:3 on other than fair faces of concrate wall surfaces & finishing the surfaces fair and even without using extra cement as in ceiling
Supply only Waterproofing Compound
M&L for applying 1.5 to 3 mm thick wall care putty on wall and making surface even and smooth complete all as specified and as directed.
M&L for three coat of white washing on ceillings incl preparation of surface
M&L for preparation of newly plastered surface of wall and applying two coats of distemper oil emulsion over a coat of alkali primer complete all as specified & directed.
M&L for applying two coat of oil emulsion distemper on old decorated wall surface complete all as specified and as directed.
M & L for preparation of newly plastered surfaces of wall and applying two coats of cement based paint over a coat of alkali resistant priming paint complete all as specified and directed.
M&L for preparation of surface and Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm
M&L for complete removal of existing treatment and Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm
Preparing new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer.
Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering
M&L for hardcore with broken stone or boulder of gauge exc 63 mm but n.exc 75 mm deposited, spread & leveled in lyers n.exc 15 cm thick watered & rammed to a true surface.
Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as directed.
M&L for 25mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in sub base of flooring and similar works finished even and fair complete
M&L 75 mm thick, plain cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate), as in sub base.
M&L PCC 1:3:6 (75 mm thick) for plinth prorection over rammed earth
M&L 100 mm thick, plain cement concrete 1:2:4, type B-1 using 20 mm graded stone aggregate as in floors and finish the surface even and fair without using extra cement complete all as specified.
M&L 15 mm thick screed bed or bedding layer of mortar for roof teatment in cement mortar 1:6 with water proffing compound.
M & L Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but n.exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of CM 1:6 complete all as specified and directed.
S&F glazed digital ceramic coloured tiles in vertical surfaces 300 mm x 450 mm x 7 to 8mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM (1:4) .
M&L for double charged vitrified coloured ceramic tiles 8-10 mm thick (Square/ rectangular) area of each tiles not exc 0.36 Sqm in floors set and jointed in neat cement slurry and pointed in white/coloured cement to match over and including 15mm thk screed bed or bedding layer in CM(1:6).
All as per item No1.071 above but on dado / skirting over 10mm thick backing coat in CM (1:4).
M&L for Cement concrete work in pavement/ hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre complete all as specified.
Forming contraction Dummy joint 65mm deep and 10mm wide with filling sealing compound grade A, as in 100mm thick concrete slab
Forming Construction joint 30mm deep 10mm wide filled with sealing compound
S&F solid PVC Door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinfoced with MS tube in opening as pe specification and drawing.
S & F factory made solid panel PVC door shutter both sides prelaminated PVC sheet,stiles and rails feathered at edges 30 mm thick(style) conisiting of frame made out of M S tubes for top and bottomrails. MS frame shall be covered with heat moulded plain colour PVC ;C; channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail. Pannelling to be fitted in the MS frame welded/sealed to the stile and rail with suitable PVC sheet bedding and jointed with solvent cement complete all as specified and as directed.
S&F Aluminium powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified (Note : Min thickness of power coating should not be less than 50 micorn)
S & F Anodised aluminium powder coated (Thickness or powder coating not less than 50 micron) door shutters Openable or Sliding, aluminium section weighing not less than 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified. (Note : S&F rates, include for handles, hinges, glazing clips, rubber packing, anodised aluminium snap on beading for fixing glass panes in frames as required.
S & F powder coated (Thickness or powder coating not less than 50 micron) aluminium window and ventilator shutters, fixed type (three tire, two Nos glass and one No wire mesh window shutter) without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified. (Note : S&F rates, include for handles, hinges, glazing clips, rubber packing, anodised aluminium snap on beading for fixing glass panes in frames as required.
Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws including cutting the grill to proper opening size for fixing and operation of handles all as specified
M & L butt hinges medium weight cold rolled mild steel of 100 mm size.
S&F Stainless steel butt hinges 100mm size medium weight
S&F aluminium handles cast type, anodised of 125 mm size.
S&F aluminium anodized handles of extruded section fabricated type of size 150 mm long.
S & F aluminium anodised, barrel tower bolts of extruded section of 150 mm size
S & F 200 mm long Aluminium anodised barrel tower bolts of extruded sections complete all as specified and as directed.
S&F 150 mm long aluminium anodised, sliding door boltetc all as specified and as directed
S&F Mild steel Mortice Lock 4 Liver, vertical type size 100mm
S&F steel windows with side hung shutters incl projecting type hing with steel handle and steel peg stay ,complete with glazing bars,dovetailed or welded
S&F steel ventilator with top hung shutter incl hinges steel peg stay,complete
S & F of 4 mm thick plain, ordinary quality sheet glass and glazing with oil putty or fixed with beads in square not exc. 0.5 sqm in each pane complete all as specified and directed.
S&F 4mm thick, Figured glass, pinhead type in squares n exc 0.5 sqm each pane.
S&F Sheet glass of 5mm thick, ordinary quality of size n exc 0.5 sq. m in each pane
S&F 12mm thick Prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination fixed with any type of frame work /joinery
Complete removal of existing roof treatment and cleaning with wirebrush preparation of existing roof surface to receive waterproofing treatment
M&L for rendering 10mm thick in CM (1:3) on existing concrete surfaces (in roof or similar item) mixing WPC @ 3% by wt of cement and finished even & smooth without using extra cement , complete all as specified and as directed. (Note : WPC shall be measured and paid separately)
Supply only liquid water proofing compound
M & L avg 25 mm thick PCC (1:2:4) type B-0 (using 12.5 mm graded crushed stone aggregate) as in roof paddding complete all as specified
M & L for roof treatment using APP based polymeric membrane minimum weight 3.5 kg/sqm and 3 mm thick reinforced with polyster non woven fabric (weight not less than 150 gms/sqm) over a tack coat of industrial bitumen 85 / 25 at the rate of 1.20 kg per sqm including cleaning surfaces including taking down old felt complete all as specified and directed by Engr-in-charge.
M&L for APP based polymeric membrane minimum wt 3 kg/sqm and min 3 mm th reinforced with polysister non oven fabric(wt not less than 150 gms) laid on primed surface by torch application complete all as specified.
Supplying and Laying CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors with outer dia 20mm including taking down complete all as specified.
Supplying and Laying CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors with outer dia 25mm including taking down complete all as specified.
S&F Brass Elbow for CPVC pipe of any dia
S&F Brass threaded adoptor FTA/MTA for CPVC pipe 25mm
S&F Tank adoptor for 25mm outer dia CPVC pipe
S&F steel water tubing galvanised medium grade 15mm bore with all fitting fixed to walls or laid in floor complete.
S&F steel water tubing galvanised medium grade 20mm bore with all fitting fixed to walls or laid in floor complete.
S&F 20mm bore stop valves fancy type chromium plated with long shank and cup (concealed type) cast copper alloy , any colour screwed down , high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions.
S & F 15 mm bore CP quarter turn angle cock/stop cock fancy type complete all as specified and as directed.
S&F 15 dia Bib tap cast copper alloy fancy type chromium plated with crutch or butterfly handle screwed,for GI pipe.
S&F 15mm CP Bib Taps long body fancy type heavy duty with wall flange all as specified and directed
S & F Two way Bib Taps, cast copper alloy, 15 mm dia, Chromium Plated, Fancy Type screwed down for iron pipe and fixed etc complete
S&F 15 dia pillar tap cast copper alloy fancy type chromium plated with crutch or butterfly handle screwed,for GI pipe.
S&F CP towel rail 20 mm dia, 60 cm long fixed with CP screws and wood cleats / rowel plug in wall, complete all as specified and as directed.
S & F CP Health faucet with 8mm dia, 1.2 Meter long flexible tube & wall hook all as specified & directed by Engineer-In-Charge.
S&F PVC valveless syphonic action type flushing cistern low level 10 ltrs capacity white with inlet, ball valve, float, handle and other all accessories.
Supply and fixing in repair 10 litre capacity PVC low level valve less syphonic action type flushing cistern, white, with inlet, ball valve, float and handle including brackets, flush pipe and bends complete all as specified and as directed.
S & F in viterous china wash down water closet pan (Pedestal pattern) white incl 'P' or 'S' trap and making good the disturbed surface to match with the existing complete all as specified and as directed.
S & F Vitreous china ware wash hand basin, white, flat back of size 550 mm X 400 mm including 32mm brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, etc complete all as specified and as directed.
S&F sheet glass shelf consisting of 5.5mm thick sheet glass self assembly 12cm width with chromium plated guard and railing 50cm long, with aluminum alloy brackets complete all as specified and as directed.
S&F in repair sheet glass shelf consisting of 5.5mm thick sheet glass self assembly 12cm width with chromium plated guard and railing 50cm long, with aluminum alloy brackets complete all as specified and as directed.
S&F flush pipe 32 mm dia incl all joint
S & F PVC connections suitable for 15 mm dia pipe with PTMT nut of lenth 450 mm.
Soap dish, any type, fixed to plugs with chromium plated brass screws
S&F in repair soap dish, brass, chromium plated fixed to wall with brass chromium plated screw, complete all as specified and as directed.
Cast iron floo trap 75 mm dia
Cast iron nahani trap 75 mm dia
S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in treanches incuding necessary clamps etc to fixing on walls as required all as specified.
S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in treanches incuding necessary clamps etc to fixing on walls as required all as specified.
S&F 75mm PVC (SWR) bend with access door
S&F 75 mm bore PVC (SWR) bends of any radius.
S&F PVC bends of any radious 110 mm bore
S&F PVC junction T equeal 110 mm bore
S&F PVC vent cowl 110 mm bore
S&F PVC (SWR) floor trap any dia, plain with grating including jointing with solvent cement
S & F Brass chromium plated shower rose 125mm size
S&F 100 mm dia CP grating incl joints with solvent cement complete all as specified and directed.
Cutting into existing manholes for connecting new pipe of any dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required
S&F Rotational moulded polyethylene water storage tanks of 1000 Liters Capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified with all necessary fitting like 20mm ball valve etc
S&F Rotational moulded polyethylene water storage tanks of 500 Liters Capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified with all necessary fitting like 20mm ball valve etc
M & L for on site LLDPE septic tank designed to carry sewage and sludge water,excavation in any type of soil,PCC 1:4:8 below foundation,vent shaft ,connectionetc complete for 05 user(Make sintex or equivalent)
M&L for soakage well excavation, in any type of soil, foundatin in pcc 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of brick masonry in CM, RCC cover slab in M25/SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.2 M dia x 1.5 M effective depth complete.
Supply and fix 1st Quality decorated venetian blind of any design/colour/size as approved by Engr-in-Charge with pulling or sliding arrangement fixed with brackets including all fittings and fixture as per manufacturer instruction complete all as specified and as directed.
M&L Point wiring with two runs of FRLSH grade PVC insulated unsheathed mulri-stranded copper conductor of size 1.5 Sqmm (phase & neutral) and one run of 1.5 Sqmm FRLSH grade PVC insulated unsheathed multi-stranded copper conductor for earth continuity wire to be drawn in and including PVC Casing and Caping (medium grade) of size not less than 25 mm width and accessories with PVC mounded switch/Terminal box and cover fixed with brass screws with cap washers for one light / fan point controlled by one 5/6 amps, one way switch complete all as directed and specified.
M&L Point wiring with two runs of FRLSH grade PVC insulated unsheathed mulri-stranded copper conductor of size 2.5 Sqmm (phase & neutral) and one run of 2.5 Sqmm FRLSH grade PVC insulated unsheathed multi-stranded copper conductor for earth continuity wire to be drawn in and including PVC Casing and Caping (medium grade) of size not less than 25 mm width and accessories with PVC mounded switch/Terminal box and cover fixed with brass screws with cap washers for one 5/15 amps socket outlet on independent board controlled with one, oneway switch complete all as directed and specified.
Sub-main wiring with PVC insulated & unsheathed two run of 6 Sqmm single core multi stranded copper conductor cable (FRLSH), 1100 Volt grade alongwith one run of 6 Sqmm PVC insulated & unsheathed copper conductor cable (FRLSH), 1100 Volt grade, connected to common earth dolly as earth continuity conductor, drawn through in pvc concealed conduit 20 mm bore heavy grade complete all as specified and as directed by the Engr-in-Charge.. Note : (i) Three runs of 6 Sqmm and one run of PVC conduit shall measured as one length.
Supply and fixing of MCB DB double door, made of sheet steel phosphates, powder painted with bus bar, neutral link, earth bar and din rail SPN 8 way with 200 Amps rated bus bar 240 Volts complete all as specified and as directed.
S & F MCB SPN 06 to 32 Amps `C` series, breaking capacity 10 kA complete all as specified and as directed.
S & F MCB SP 06 to 32 Amps `C` series, breaking capacity 10 kA complete all as specified and as directed.
Supply and fixing including connection of switch piano flush button type single pole one way 5 Amps.
Supply and fixing including connection of switch socket combination, 5 in 1, 3 pin 5/16 amps flush type universal..
Supply and fixing of ceilings rose of PVC polycarbonate isolated body three terminals.
Supply and fixing of Square recess mounted LED full open 2x2 ft.Tile , Glare free uniform illumination downlight of capacity 36 watt with die-cast aluminium housing finished in premium white powder coating including all fittings complete all as specified and as directed.
Supply and fixing of MCB Protected Power unit not less then 20 Amps capacity comprising of suitable capacity SPN MCB, 3 pin Socket and On/Off Motor Starter suitable for controlling AC and including making good to existing disturbed works completete all as directed and specified.
Supply and install hi wall split unit indoor/outdoor complete with cordless remote control unit and with in built air ioniser and plasma filter for better indoor air quality,inverter type split AC 5 star rating capacity of 1.5 TR complete all as specified and as directed.
M & L for copper tubing 15mm/18mm dia of superior quality suitable for refrigeration suction line and 6mm dia copper pipe with insulatuion for discharge line for split type air conditioners.
M & L for PVC flexible pipe 15 mm dia fixed to wall on roof complete all as directed.
Making opening/drilling of size 65 mm dia, using heavy duty stone driller/cutter machine in the stone machinry wall for installing spilit type air conditioners and for passing suction and discharge refrigerant pipe lines, drain pipe, cable etc and making good the disturbed surface all as directed.
M & L for MS stand duly painted suitable for fixing 1.5 TR AC out door unit and fixed complete all as directed.
S & F voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 volts to 250 volts with out put voltage stabilized at 230 volts with accuracy of +/- 2.5% and of capacity 4 KVA.
RANA ENTERPRISES
MS BEHERA SANITARY AND HARDWARE
vaishnaveedevienterprises
M/s R.C REFRIGERATION
M/S DK MUKHERJEE CO
M/S JANAKI ENTERPRISES
DS ENTERPRISES
Bidder Name
RANA ENTERPRISES
DS ENTERPRISES
M/s R.C REFRIGERATION
MS VIDYANJALI
MS BEHERA SANITARY AND HARDWARE
M/S JANAKI ENTERPRISES
vaishnaveedevienterprises
M/S DK MUKHERJEE CO
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .