Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹82.8 LAccepted-AOC | ₹82.8 L Quoted ₹83.5 L | L1 | Accepted-AOC Lowest rate amount and all accept condition |
| 2 | L2₹84.8 LRejected-Finance 143 INDUSTRIAL AREA PHASE II PANCHKULA HARYANA 134112 | PANCHKULA | HARYANA | 134112 | ₹84.8 L | L2 | Rejected-Finance Higher rate amount |
| 3 | L3₹86.9 LRejected-Finance A 14 INDUSTRIAL HOUSE INDERPURI NEW DELHI 1100012 | NEW DELHI | NEW DELHI | DELHI | 110012 | ₹86.9 L | L3 | Rejected-Finance Highest rate amount |
| Sl No | Description | Qty | Unit | Avon Engineering Company L2 | MOHINI ELECTRICALS L3 | AADI SHAKTI ENTERPRISES L1 |
|---|---|---|---|---|---|---|
| 1.00 | Supply, Erection and Commissioning of Axial flow VT Pump having discharge 5 Cusec Capacity, lift 10 feet , including Y- with MS delivery along with bend of minimum thickness8 Mm of length 12 mtrs. (6+6) mtr. With both side flange welded with suitable size of ms gridder as per site requirement with epoxy coating i/c welding etc. complete in all respect as per site requirement | 1 | No. | 10,40,000 ₹10.4 L | 11,75,000 ₹11.8 L | 10,62,000 ₹10.6 L |
| 2.00 | Supply, Erection and Commissioning of solid shaft squirrel cage 30 HP Lt motor 3 phase 415 V induction moto4r 1440 RPM , suitable for 5 CS pump complete in all respect as per site requirement | 1 | No. | 2,65,000 ₹2.6 L | 2,54,000 ₹2.5 L | 2,62,000 ₹2.6 L |
| 3.00 | Supply, Erection and Commissioning of fully automatic ATS Starter suitable for 30 HP motor, 3 pole, Contactors of 80A/80A/50A for main transformer/start, interlinking through bus bars of suitable size complete in all respect, with degree of protection IP 54 complete with small item like air cooled ATS, Thimble, nut Bolts Lugs etc., wi6th a stand of MS angle (50x50x6MM) with suitable copper cable of size 16 MM of length 15 for each motor as per site requirement | 1 | No. | 3,60,000 ₹3.6 L | 3,95,000 ₹4.0 L | 3,72,000 ₹3.7 L |
| 4.00 | Supply, Erection and Commissioning of 10 cs Axial flow pump RPM having static lift 12.0 ft, i/c Y body with MS delivery along with bend of minimum thickness 8 MM of Lenth 12 Mtr (6+6) mtr. With both side flange welded with epoxy coating incl. welding etc. complete in all respect as per site requirement. (as per lates technical specification approved by department.) | 1 | No. | 17,12,000 ₹17.1 L | 18,95,000 ₹18.9 L | 16,95,000 ₹16.9 L |
| 5.00 | Supply, Erection and Commissioning of solid shaft squirrel cage 50 HP Lt motor 3 phase 415 V induction moto4r 1440 RPM , suitable for 10 CS pump complete in all respect as per motor capacity and ATS starter as pe4r5 siter site requirement. (as per latest techincial specifciaiton | 1 | No. | 5,22,000 ₹5.2 L | 5,10,000 ₹5.1 L | 5,15,000 ₹5.2 L |
| 6.00 | Supply, Erection and Commissioning of fully automatic ATS Starter suitable for 50 HP motor, 3 pole, Contactors of 150A/110A/80A for main transformer/start, interlinking through bus bars of suitable size complete in all respect, with degree of protection IP 54 complete with small item like air cooled ATS, Thimble, nut Bolts Lugs etc., wi6th a stand of MS angle (50x50x6MM) with suitable copper cable of size of length 15 for each motor as per site requirement | 1 | No. | 5,10,000 ₹5.1 L | 5,35,000 ₹5.3 L | 5,00,000 ₹5 L |
| 7.00 | Supply, Erection and commissioning of Axia/mixed flow eater lubricated VT pump 20Cs having discharge of 20 cs/3750 cubic Mtr, per hours discharge at st6atic head of 4.5 Mtr with delivery pipe having 7.1 MM thickness 20 inch diameter along with the required MS bend in accordance with (IS2062:1989 grade A with epoxy from inside and a painted from out side with two coats of anticorrosive bituminous based paint. complete in all respect as per site as per approved Technical specification of IWRD deptt. Haryana | 1 | No. | 24,45,000 ₹24.4 L | 23,35,000 ₹23.4 L | 23,56,000 ₹23.6 L |
| 8.00 | Supply, Erection and Commissioning of solid shaft motor of capacity 100 HP 6 pole ,960 RPC, 415 v 3phase suitable for 20 Cs vt axial flow pump complete in all respect as per site conditions as per approved technical specification of IWRD Dept. Haryana. | 1 | No. | 10,15,000 ₹10.2 L | 9,95,000 ₹9.9 L | 10,15,000 ₹10.2 L |
| 9.00 | Supply, Erection and Commissioning of fully automatic ATS suitable for 100 HP motor with suitable contactor fo4r mai9n transformer/start6 interlinking bush bar of suitable size complete in all respect as per site condition with degree of protection IP 54 complete with item link air cooled ATS, thimble nut-bolt, etc with stand of MS angle (50x50x6MM) of 1feet height from floor level with in allied accessories the suitable size of copper cable from ATS to Motor as per site requirement with allied accessories as per the site and approved make and specifications by irrigation and water resources deptt. Hayrna | 1 | No. | 6,15,000 ₹6.2 L | 5,95,000 ₹6.0 L | 5,75,000 ₹5.8 L |
Updated dates
Tender Value
₹81.4 L
EMD Value
₹1.6 L
Closing Date
9 Feb 2026, 5:00 pmClosed
Executive Engineer
Executive Engineer, HWS Mechanical Division Canal colony Hisar Haryana 125001
Estimate for Supply,Erection and Commissioning of VT Pumps and motor of 5 Cs. Capacity 1No. ,1 NO. 10 Cs and 1No. 20 Cs. with allied accessories for newly created sites in recent flood season in hansi consistuency villages kheri gagan and jeetpura
2026_HRY_497141_1
(Hisar-8)villages kheri gagan and jeetpura
Open Tender
Pumps/Motors
21 days
HWS Mechanical Division Canal colony Hisar
Please refer Tender documents
4 documents required · 4 mandatory
₹5,000
₹1.6 L
Yes
HWS Mechanical Division Canal colony Hisar
20 Apr 2026
16 Jan 2026
10 Feb 2026
16 Jan 2026
9 Feb 2026
16 Jan 2026
23 Jan 2026
Supply, Erection and Commissioning of Axial flow VT Pump having discharge 5 Cusec Capacity, lift 10 feet , including Y- with MS delivery along with bend of minimum thickness8 Mm of length 12 mtrs. (6+6) mtr. With both side flange welded with suitable size of ms gridder as per site requirement with epoxy coating i/c welding etc. complete in all respect as per site requirement
Supply, Erection and Commissioning of solid shaft squirrel cage 30 HP Lt motor 3 phase 415 V induction moto4r 1440 RPM , suitable for 5 CS pump complete in all respect as per site requirement
Supply, Erection and Commissioning of fully automatic ATS Starter suitable for 30 HP motor, 3 pole, Contactors of 80A/80A/50A for main transformer/start, interlinking through bus bars of suitable size complete in all respect, with degree of protection IP 54 complete with small item like air cooled ATS, Thimble, nut Bolts Lugs etc., wi6th a stand of MS angle (50x50x6MM) with suitable copper cable of size 16 MM of length 15 for each motor as per site requirement
Supply, Erection and Commissioning of 10 cs Axial flow pump RPM having static lift 12.0 ft, i/c Y body with MS delivery along with bend of minimum thickness 8 MM of Lenth 12 Mtr (6+6) mtr. With both side flange welded with epoxy coating incl. welding etc. complete in all respect as per site requirement. (as per lates technical specification approved by department.)
Supply, Erection and Commissioning of solid shaft squirrel cage 50 HP Lt motor 3 phase 415 V induction moto4r 1440 RPM , suitable for 10 CS pump complete in all respect as per motor capacity and ATS starter as pe4r5 siter site requirement. (as per latest techincial specifciaiton
Supply, Erection and Commissioning of fully automatic ATS Starter suitable for 50 HP motor, 3 pole, Contactors of 150A/110A/80A for main transformer/start, interlinking through bus bars of suitable size complete in all respect, with degree of protection IP 54 complete with small item like air cooled ATS, Thimble, nut Bolts Lugs etc., wi6th a stand of MS angle (50x50x6MM) with suitable copper cable of size of length 15 for each motor as per site requirement
Supply, Erection and commissioning of Axia/mixed flow eater lubricated VT pump 20Cs having discharge of 20 cs/3750 cubic Mtr, per hours discharge at st6atic head of 4.5 Mtr with delivery pipe having 7.1 MM thickness 20 inch diameter along with the required MS bend in accordance with (IS2062:1989 grade A with epoxy from inside and a painted from out side with two coats of anticorrosive bituminous based paint. complete in all respect as per site as per approved Technical specification of IWRD deptt. Haryana
Supply, Erection and Commissioning of solid shaft motor of capacity 100 HP 6 pole ,960 RPC, 415 v 3phase suitable for 20 Cs vt axial flow pump complete in all respect as per site conditions as per approved technical specification of IWRD Dept. Haryana.
Supply, Erection and Commissioning of fully automatic ATS suitable for 100 HP motor with suitable contactor fo4r mai9n transformer/start6 interlinking bush bar of suitable size complete in all respect as per site condition with degree of protection IP 54 complete with item link air cooled ATS, thimble nut-bolt, etc with stand of MS angle (50x50x6MM) of 1feet height from floor level with in allied accessories the suitable size of copper cable from ATS to Motor as per site requirement with allied accessories as per the site and approved make and specifications by irrigation and water resources deptt. Hayrna
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
techsummary_575863.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.58 MB
BOQ_575863.xls
BOQ • 0.24 MB
BidbookHisar8.pdf
Other Document • 34.46 MB
Download all tender documents and submit your bid