Repairing of Roof water proofing work in Resi. No. Sa-16/1, 16/4 and 17/2, 17/4, Sa-12 and repairing of Outer finishing work Steno Block No. 16 and 17 at Canal Colony Cantt Road, Lucknow.(LotNo.02)

Amount

Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/450N/5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : including the following works

(a) For prepairing the surface Dismantling existing mortar/plaster over roof including disposal of refuse as directed by the Engineer-in-charge with in a distance of 60 meter.

(b) 12mm cement plaster in sigle coat on top of slab in single storey building finished even & smooth 1 cement : 4 coarse sand including all L/M, T&P etc under the Laying of APP sheet .

(C.) Providing and laying 40mm thick 1:2:4 cement coarse sand and stone ballast 6.7mm nominal size with Murga Jali including all material, Labour,T&P and curing complete over the APP sheet.

12mm cement plaster in sigle coat in single storey building finished even & smooth 1 cement : 4 coarse sand including all L/M, T&P etc including the Dismantling existing plaster, including disposal of refuse as directed by the Engineer-in-charge with in distance of 60m.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc 100mm nominal outer dia pipe

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc 50mm nominal outer dia pipe

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc 20mm nominal outer dia pipe

P/F HEP make HCI pipe in 1.8 Mte length 100 mm dia weight 22 kg

P/F HEP make HCI pipe in 1.8 Mte length 150 mm dia weight 22 kg

Supplying and fixing C.I. cover without frame for manholes : 455x610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg

Finishing walls with Premium Acrylic Smooth exterior paint with silicone additives of required shade:New work (Two or More coats applied @1.43ltr/10sqm over and including priming coat of exterior primer applied @2.20Kg/10sqm) (apex ultima, weather coat all guard) asian, berger

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces

M/s SVGS Enterprises

vajid ali

m/s mohd. zamil

URMILA DEVI