CERTAIN BR REPAIRS TO VARIOUS BLDGS AT DQA (CV), DGQA GUEST HOUSE AND MAINTENANCE WORKS TO THE BLDGS IN OD MD ACCN PTMS MD ACCN AREA INCLUDING REPAIRS TO COMPOUND WALL GATES ALONG WITH REPAIRS TO VARIOUS MINOR REPAIR WORKS AT CQA (HV), CQA (AVA), C

Amount

Taking up or down steel water tubings and connections of 15mm bore pipe including cleaning or re-fixing or removal to store, complete all as specified and directed.

Taking up or down steel water tubings and connections of 20mm bore pipe including cleaning or re-fixing or removal to store , complete all as specified and directed.

Cutting existing steel tubing of size 15/20mm for alterations or additions (Each cut measured) complete all as specified and directed.

M & L for Cutting chases for concealed water tubing of any type of wall, pinning in. making good to facings where required and pointing in CM 1:3 etc., and making good by applying wall care putty etc, cutting not exc 10 cm girth complete all as specified and directed.

M&L for unplasticised PVC pipes 15mm bore of pressure rating 10kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and as directed.

M&L for unplasticised PVC pipes 20mm bore of pressure rating 10kgf/sqcm fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and as directed.

Cutting holes into or through brick walls superficial area exc 150 sqcm but nexc 400 sqcm built in cement mortar and making good in CM 1:3 or cement concrete 1:2:4 type B-l as required

S&F in repairs 15mm bore Pillar taps bore cast copper alloy, with capstan heads,chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe, complete all as specified.

S&F 15mm bore stop valve/Angle cock, chromium plated fancy type cast copper alloy, screwed down high pressure, with crutch or butter fly handle, screwed both ends for iron pipes or for unions and fixed of,complete all as specified and directed.

S&F in repairs 15mm bore Bib taps, cast copper alloy chromium plated with crutch or butter-fly handle screwed down, screwed for iron pipe or for brass ferrules, complete all as specified and directed.

S&F in repair 15mm bore brass CP mixer for mixing hot & cold water, screwed down for iron pipe and fixed, complete all as specified and directed.

S&F in repairs 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 142gms) complete all as specified and as directed.

S&F 1000 ltr capacity rotational moulded polyethylene water storage tanks (Cylinderical vertical with closed top) and fixed in position, all as specified in SSR Part-I, including dismantling of old water tank of any description, complete all as specified and directed

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position after cleaning and removing all scale and dirt, etc, from tanks capacity exc 500 and n.exc 1000ltr and from mouths of circulating pipes, etc. complete all as specified and directed

S&F 15mm bore Bib tap standard of PTMT any colour screwed, for iron pipe (minimum wt 90gm), all as specified and directed.

S&F in repairs 15mm bore angle/stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, minimum weight 90 gms, complete all as specified and directed.

S&F in repairs PVC connection 15mm size with PTMT nuts of length 600mm,complete all as specified and directed all as specified and directed.

S&F in repairs 125mm Chromium plated shower roses with or without swivel joints, including fixing to steel pipe or union all as specified and as directed.

S&F in repairs 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe, all as specified and directed.

S&F in repair Lid for rotational moulded polyethylene water storage tanks (any capcity) complete all as specified and directed

S&F in repairs Tubular towel rail, brass chromium plated 20mm dia D type, 60cm long between flanges, complete all as specified and directed.

S&F in repairs only brass chromium plated Health Faucet with 1mtr Flexible tube & Hook complete all as specified and directed

S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick, 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and as directed.

S&F in repairs Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern) white(excluding flushing cistern and flush pipe) including connection to drain or out going pipe and flush pipe anti symphonize pipe etc complete all as specified and as directed.

S & F in repair Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete in all respect all as specified

S & F in repairs of 10 litre capacity of Vitreous China valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, 32mm flush pipe etc complete all as specified and as directed

S&F in repairs Vitreous China squatting pan of 'Orissa' pattern of size 580 x 440mm, white, with integral foot rests, complete including provision of lime concrete bedding all as directed.

S&F in repairs Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern including all joints all as specified and as directed.

S&F in repairs Vitreous China wash Basin (flat back or angle back type) , of size 550x400mm including brackets, waste coupling PTMT, and waste pipe PVC 32mm dia including cutting for and pinning in ends of brackets or erecting stand etc, complete all as specified and directed

S&F in repairs 32mm Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm- 45gms) all as specified and as directed.

S&Fin repairs PVC waste pipe 32mm bore all as specified and directed

S&F in repairs 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement, all as specified and directed.

S&F in repairs Grating doom 100mm dia of PTMT (Minimum weight 25gms) all as specified and as directed.

Taking down PVC (SWR) pipes 110/75mm internal dia laid in trenches or fixed to walls incl all fittings complete all as specified and as directed.

S&F PVC (SWR) pipe 110mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.

S&F PVC (SWR) pipe 75 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.

S&F PVC (SWR) pipe 110mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and directed.

S&F PVC (SWR) pipe 75 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixed to walls, complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends any radius, complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends any radius, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M&L vitrified ceramic tiles 10mm thick light shade (Square/rectangular) polished, area of each tiles n.exc 0.36 Sqm, in floors over 15mm thick screed bed in CM 1:6 on floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade all as specified and as directed.

M&L vitrified ceramic tiles 10mm thick light shade (Square/rectangular) polished, area of each tiles n.exc 0.36 Sqm, but in vertical surface (dado/skirting) to match the shade of floor tiles laid over and including 10mm thick back coat in CM (1:3), complete all as specified and as directed.

Non - skid Coloured Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick screed bed in CM (1:4) complete all as specified and directed.

M&L Glazed ceramic coloured tiles (300x200mm) x 6 to 7mm thick, as in vertical surfaces such as in skirting and dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 10mm thick back coat in CM (1:4),complete all as specified and directed.

S&F in repairs Sinks with drainage board made of stainless steel 1mm thick kitchen of laboratory with plugs, washers and wastes: including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed.

M&L Complete removal of existing treatment of wall and applying two coats of oil bound distemper, white or colour over one coat of wall care putty over over a coat of alkali resistant primer, including cleaning the floor / joinery, surfaces, glass panes complete all as specified and as directed.

Material and labour for preparation of old surfaces including washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of oil emulsion distemper on wall all as specified and as directed.

Material and labour for prepartion of old painted surfaces of wood and wooden based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and as directed.

Material and labour for preparation of old painted surfaces of steel and iron of any description over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and as directed.

Material and labour for preparation of old surfaces including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots on wall/ceiling and applying one coat of white wash all as specified and as directed.

S & F in repairs for curtain rails with modular brackets, stainless steel, chromium plated with fixing brackets, stops, rollers etc all as specified and as directed

S&F in repair solid PVC door frame of size 50mmx47mm made out of 5mm thick plain colour PVC sheet reinforced with 19mm MS square tube of 19 gauge mitre cut at two corners and joined by inserting two Nos of 150mm long brackets of 15mmx15mm MS square tube inside the 19mm MS square tube and suitably screwed complete all as specified and as directed.

S&F in repair factory made solid PVC moulded door shutter with wood free EPS 28 to 30mm thick(styles) with 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on front face and 2mm plain colour PVC sheet on backface, supplying and fixing in frame at site as per specification complete all as specified and as directed.

S&F in repair of 75mm size, butt hinge medium weight cold rolled mild steel & fixed complete all as specified and as directed.

S&F in repair of 100 mm length aluminum, anodised, barrel tower bolts of extruded section and fixed all as specified and as directed.

S&F in repair of 100mm size aluminum handles, cast type anodised complete all as specified & directed.

Supply and fix in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width aperture 1.40mm and fixed with stainless steel wire staples all as specified and as directed

S&F in repairs anodised aluminimum window shutters (Powder coated), fixed type without sash bar, aluminimum section 0.55kg/m including necessary joining cleats, glazing clips, handles, hinges, screws, rubber packing, anodised aluminimum snap beading screws etc., complete all as specified and directed

S & F in repairs anodised aluminium frame (Powder coated) for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S & F in repairs anodised aluminium door shutters (Powder coated), aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws, locks, etc. complete all as specified & directed.

S & F in repair of Aluminium die cast body Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified & directed.

S&F for 5.5mm thick sheet glass, ordinary/figured quality and glazing with oil putty in square exc 0.50 Sqm in each pane complete all as specified and as directed

M&L for 12mm thick prelaminated particle board exterior garade prelaminated one side with decorative choice lamination & otherr side balancing white lamination fixed with screws to aluminimum frame work shutter etc.,all as specified and as directed.

S & F in repair of aluminium snap and false ceiling of panels of size 605 x 605 mm using aliminium anodised wall angle of size 25 x 25 x 1.5 mm thick fixed to walls with rawl plug and screws n. exc 1.50m centre to centre and intermidiate panels using main "Tee" and cross "Tee"aluminium anodised section of size 35 x 25 x 1.50 mm and 25 x 25 x 1.50mm thick suspended with and including 2mm dia GI wire n exc 1.2 m centre to centre including 9.5 mm thick PVC laminated Gypsum ceiling tiles complete all as specified and as directed.

Taking down chowkats or frames exc 1.5Sqm and not exc. 4Sqm each with shutters (without taking off shutters from the frames), complete all as specified and directed.

M&L forming jambs etc to openings (to forgoing items) incl cutting , toothing and properly bonding into old work also facing, jointing and pointing to match existing work in Cement mortar 1:6 or cement lime mortar 1:1:8 complete all as specified and as directed.

S & F small articles of steel such as hold fast, etc of Gde Fe 410-0 or Fe-290 Gde E-165 complete all as specified and directed.

M&L PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in hold fast etc completed all as specified and as directed.

M & L for preparing and treating ends of posts, back of chowkats with coal tar black paint, area tarred exc. 0.10 sqm but not exc. 0.50 sqm all as specified or as directed.

S&F Second class hardwood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

S & F of 35mm thick 2nd class hard wood (Kail) Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete, all as specified and directed.

S&F 30mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass gauge etc, (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, cut and mitred beads for securing glass etc size of members of shutters as spd in SSR part I, section 8 complete all as specified and as directed.

M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

S&F in repair 100 mm long aluminium anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed.

S&F in repair 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S&F in repair 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and as directed.

S&F in repair 150mm long Aluminium handles, cast type, anodised, all as specified and directed.

S&F in repair of floor door stopper 150mm size of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor all as specified and as directed.

S&F in repair Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete as specified and directed.

Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work, complete all as specified and directed.

M&L Brickwork with sub class B bricks straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed

M&L Rendering 10mm thick on fair faces of brick work or concrete surface, in cement mortar 1:6 finished the surface even and smooth without using extra cement , complete, all as specified and as directed.

M&L Rendering 5mm thick in CM 1:4 with WPC compound over a coat of 10mm thick in CM 1:6 on other than fair faces of brick work surfaces, even and smooth (without using extra cement), complete all as specified and as directed.

M&L Rendering 5mm thick on ceiling, in cement mortar 1:3 finished the surface even and smooth without using extra cement, complete all as specified and as directed.

M&L for preparation of newly plastered surface of walls and applying two coats of oil bound distemper and one coat of 3mm thick wall care putty over a coat of alkali resistant primer complete all as specified and as directed.

M&L for preparation of newly plastered surface of walls and applying two coats of exterior emulsion paint and one coat of wall care putty over chalk whitening primer complete all as specified and as directed.

M&L for preparing newly plastered of ceiling surfaces and applying three coats of white wash complete all as specified and as directed.

Dismantling of ceiling board of any thickness. Including frame work complete all as specified and as directed.

M & L in repair for refixing of PVC laminated Gypsum ceiling tiles or Perforated or semi-perforated particle board/tiles obtained from Item No complete all as specified and as directed.

Dismantling plain /corrugated steel sheeting any gauge, any thickness in roof covering, valley gutters or wall cladding etc complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed wih self tapping screws all as specified and as directed.

S&F in repairs 15mm bore stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, minimum weight 90 gms, complete all as specified and directed.

S&F 20mm bore stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, minimum weight 90 gms, complete all as specified and directed.

S&F in repairs 15mm Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 110gms, all as specified and directed.

Cleaning and removing all scale and dirt, etc, from tanks capacity exc 500 and n.exc 1000ltr and from mouths of circulating pipes, etc. all as specified and directed

S&F 125mm Chromium plated shower roses with or without swivel joints, including fixing to steel pipe or union all as specified and directed

S&F in repairs Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) all as specified and directed

S&F Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) all as specified and directed

Taking down chowkats or frame exc. 1.50 sqm but nexc 4.00 sqm each with shutter (without taking of shutter from the frame) complete all as specified and as directed.

Taking down shutters of any description exc 1 Sqm & nexc 2 Sqm each complete all as specified and as directed.

S&F for second class hard wood plain, solid, straight, chowkats and frames, wrought framed rebated on the solid, rounded or chamfered put together with glue pinned complete all as specified and as directed.

Supply and fix 35mm thick, 2nd class hard wood, plain, framed, panelled shutters (any number of panels), with panels of veneered particle board medium density, wood particle board with commercial face veneers supplied and fitted to chowkats complete all as specified and directed.

M & L Preparation of new wood surfaces of any description over 10cm width or girth and priming with pink primer and painting with synthetic enamel painting two coats all as specified and as directed.

S&F floor door stopper 150mm size of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor all as specified and as directed.

S&F 150mm size aluminum handles, cast type anodised complete all as specified & directed.

S&F 100mm Butt hinges, extruded aluminimum alloy with galavanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified & directed.

S&F for 125mm length aluminum, anodised, barrel tower bolts of extruded section and fixed all as specified and as directed.

S&F in repair 100mm size, butt hinge medium weight cold rolled mild steel & fixed complete all as specified & directed.

S&F in repair 300 mm long Aluminium sliding door bolts with hasp and staple(bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium and fixed all as specified and as directed.

S&F in repair for 200mm length aluminum, anodised, barrel tower bolts of extruded section and fixed all as specified and as directed.

S&F in repair for 150mm length aluminum, anodised, barrel tower bolts of extruded section and fixed all as specified and as directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specially provided for (reinforcement cut as required to facilitate demolition) complete all as specified and as directed

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specifed and directed

Demolition of stone slabs and tiles of any description or thickness in floors, aprons laid dry or laid dry and pointed completed all as specified and directed.

M&L Brickwork with fly ash Old size bricks straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed

M&L Rendering 15mm thick on fair faces of brick work or concrete surface, in cement mortar 1:6 finished the surface even and smooth without using extra cement, complete all as specified

S&F MS Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete with Fe 410 -W(Gde-E- 250)-qualityA complete all as specified and as directed.

M&L Granite 20mm thk (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

M & L for Formwork to side of columns, fair finished surfaces of concrete square, rectangular and similar work vertical or to batter for flat surfaces complete all as specified and as directed .

M&L for Reinforced cement concrete type A1 1:1.5:3 using 20mm graded aggregate(Nominal mix design) for columns, pillars, piers, posts and struts complete all specified and directed.

S & F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all specified and directed.

S & F Mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all specified and directed.

S&F 1mm thick Mild steel, plain black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. complete all as specified and as directed.

Material and labour for preparing newly plastered surfaces of wall and applying two coat of exterior emulsion over one coat of primer complete all as specified and as directed

M&L for preparation of new steel surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

S & F in repairs of Vitreous china flat back urinal of size 465x355x265 mm white (minimum) with grating and union for discharge pipe (including flushing cistern, flush pipe) including providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and including discharge pipe of PVC 32mm dia fixed in repairs complete all as specified and directed.

PSK Enterprises (BID ID -3179988)

SAI SRI HARSHA ENTERPRISES (BID ID -3179806)