REPAIR/ REPLACEMENT OF CAR DOOR, LANDING DOOR, ROPE , SHEAVE, CAR CEILING, PAINTING, LOP, COP AND MISCELLANEOUS PARTS OF LIFTS INSTALLED AT CARRIAPPA VIHAR, SP MARG, ENGR OFFICER MESS, MES HEIGHT, DGIS, AFMSD AND URBAN VILLAGE UNDER GE UTILITY PLANT

Amount

Section-I

Supply & fixing main hoist rope of size 6 strands x 19 of nominal dia 13mm heavy duty for 3 grooves passenger lifts including taking down old unserviceable one complete all as specified and directed by Engr-in-charge. (Make : Usha Martin/ Mahadev Elevator/ Bharat wire rope Ltd/ Shree Steel wire & Ropes). (For 04 Lifts at S P Marg Block No. 7, 8 ,9 & 11)

Supply & fixing main hoist rope of size 6 strands x 19 of nominal dia 13mm heavy duty for 4 grooves passenger lifts including taking down old unserviceable one complete all as specified and directed by Engr-in-charge. (Make : Usha Martin/ Mahadev Elevator/ Bharat wire rope Ltd/ Shree Steel wire & Ropes). (For 04 Lifts at S P Marg Block No. 16, 18, 20 & 21)

Supply, installing, commissioning and testing of defective Sheave C.I/Casting Traction Sheave 4 Grooves pully code (LOA260F6) OD610*4*13 mm bore size 90 mm ,key size 20*7 Bore length -150 mm ,width size 115 mm (in 08 passenger lift) G+6 storey ( 7 storeis ) as per site requirement welding/brazing etc including taking down old unserviceable sheave along with all connected accessories complete all as specified and as directed by Engr-in-Charge. (Make :- As per OEM OTIS recommendation). (For S P Marg Block No. 16, 18 & 21)

Supply, installing, commissioning and testing of defective Sheave C.I/Casting Traction Sheave 3 Grooves pully code (LOA260F5) OD610*3*13 mm bore size 90 mm ,key size 20*7 Bore length -150 mm ,width size 115 mm (in 08 passenger lift) G+6 storey ( 7 storeis ) as per site requirement welding/brazing including taking down old unserviceable sheave along with all connected accessories complete all as specified and as directed by Engr-in-Charge. (Make :- As per OEM OTIS recommendation). (For S P Marg Block No. 8 & 12)

Supply and fixing of complete pit pully assembly made of cast iron suitable for 08/ 13 passenger lifts including taking down old unserviceable one for G + 6 = 7 stories) as per site requirement and manufacturer instructions complete and testing on load complete all as specified and as directed by Engr-in-Charge.(Make :- As per OEM OTIS recommendation). (For Carriapppa Vihar Block No. 1, 4, 11, 18 & 25)

Supply and fixing of OSG rope of size 6 strands x 19 of nominal dia 6 mm including taking down old unserviceable rope complete all as specified and as directed by Engr-in-Charge. (Make :- Usha Martin/ Mahadev Elevator/ Bharat Wire Rope Ltd./ Shree Steel Wire Rope Ltd.) (For Carriapppa Vihar Block No. 1, 4, 8 & 9)

Supply, fixing, testing and commissioning ARD 2.5KVA (Automatic Rescue Device) with panel and including necessary internal wiring work, suitable for all make lifts 13 passenger Lifts including ARD batteries as per site requirement for 13 passenger lifts installed at SP Marg and Carriappa Vihar including taking down old unserviceable ARD complete all as specified and directed by Engr-in-Charge. (Make :- As per OEM OTIS recommendation).(Make of battary:- EXIDE/ AMARON/ STANDARD FURKKAVA)

Dismantling/ taking down existing worn out door without causing any damaged to door sensor and supply, fixing commissioning and testing of complete car door, suitable to existing lift SS Honycomb finish metal sheet minimum 1.25mm thickness SS sheet standard 304 and scratch resistant and complete door operator assembly system (i.e. door motor, door drive air card) and car sill for smooth opening of car doors suitable for 08 passenger lift (Make:- M/s OTIS) width of centre opening 800mm, height of opening 2000mm, two way centre opening with gate lock, door shoe and other all fittings and refixing of taking down door sensor as per site requirement complete all as specified and directed by Engr-in-Charge.(Make:- As per OEM M/s OTIS recomendation) NOTE:- (i) Rate quoted by the contractor are deemed ti be inclusive of minor spares such as gate lock, door rollers, skates, door shoe, door rope, etc. (ii) Any damaged done by the contractor of same make and model the door sensor while taking down shall be replace free of cost by the contractor for Block Akhura.)

Supply, installation, commissioning & testing of latest technology based LOP with latest type Braille push buotton assembly along with all connected accessories complete suitable for 08/10 passenger lifts of make M/s OTIS installed lift at Saragadi including taking down old unserviceable one complete all as specified and directed by Engr-in-charge. (Make:- as per OEM recommendation)

Supply, installation, commissioning & testing of latest technology based COP with latest type Braille push buotton assembly along with all connected accessories complete suitable for 08 passenger lifts of make M/s OTIS installed lift at Saragadi including taking down old unserviceable one complete all as specified and directed by Engr-in-charge. (Make:- as per OEM recommendation)

Supply , installation,commissioning & testing of latest technology based COP with latest technology with combination of touchless & touch along with all connected accessories complete including taking down old unserviceable one of installed lift at 08 Passenger (Make : Otis) G+ 4 total 05 storey lifts installed at Engr Officer Mess `complete all as specified and directed by Engr-in-charge. (Make:- As per OEM recomendation).

Supply , installation,commissioning & testing of latest technology based LOP with latest technology with combination of touchless & touch along with all connected accessories complete including taking down old unserviceable one of installed lift at 08 Passenger (Make : Otis) G+ 4 total 05 storey lifts installed at Engr Officer Mess complete all as specified and directed by Engr-in-charge. (Make:- As per OEM recomendation)

Supply & fixing in replacement Latest False Ceiling system with stainless steel mirror finish suitable for 08 Passenger lifts including 12" sweep cabin fan with grill, bracket fixing of 04 Nos LED light complete filltings including necessary wiring proper illuminatation in the lift car as per site requirement (in 08 passenger lift) G+4 storey(total 05 storey) of make M/s OTIS installed at Engr Officer Mess heavy duty including taking down the old one complete all as specified and directed by Engr-in-charge. ( Make : As per OEM recomendation).

Dismantaling/Taking down old unserviceable landing door and Supply , fixing, testing and commossioning of complete Landing door, SS hairline finish metal sheet 18 gauge approx 1.2 mm thickness SS sheet standard 304 scratch resistance including complete door header assy(i.e door hanger roller) and landing sill suitable for 08 Passenger lift (Make:- Otis) installed at Engr Officer Mess, width of one sided opening 800 mm,height of opening 2000mm, 1 way opening with all fittings as per site requirement complete all as directed by Engr-in-Charge. (Note:- (i) Rate quoted by contractor are deemed to be inclusive of complete replacement of minor spares such as Gate locks, door rollers, skates, door shoe, door rope etc and any civil work required at site for taking out/old door assy and fixing new door assy and making good disturbed surface all as directed by Engr-in-Charge. (ii) Any damage done to the door sensor while taking down shall be replace free of cost by the contractor of same make and model

Dismantling/Taking down old unserviceable Car door and supply, fixing, testing and commissioning of complete Car door SS Hairline finish metal sheet 18 gauge approx 1.2 mm thickness SS Sheet standard 304 and scratch resistant & complete door operator assembly system(i.e door motor, door drive, air card) and car sill for smooth opening of Car doors suitable for 08 passenger lift (Make:-Otis),installed at Engr Officer Mess, width of one way opening 800 mm ,height of opening 2000 mm, one way opening all fittings, gate lock and door shoes all as directed by Engr-in-Charge.Make :Otis (Note:-(i) Rate quoted by contractor are deemed to be inclusive of minor spares such as Gate locks, door rollers, skates, door shoe, door rope etc(ii) Any damage done to the contractor of same make and model the door sensor while taking down shall be replace free of cost by the contractor of same make & model.

Supply & fixing aluminium landing / car door sill for (Size :- 1700mm x 50mm x 30mm thick as per sample suitable for 8 passenger lifts of Make - Otis installed at Engr Officer Mess including taking down old uncerviceable landing / car door Sill complete all as specified and directed by Engineer-in-Charge. (Make:- as per OEM recommendation)

Supply & fixing MS landing door frame 800mm opening and 3mm thick as per sample suitable for 08 passenger lifts of make Otis installed at Engr Officer Mess including taking down old unserviceable landing doors and complete all as specified and directed.

Note for (SECTION-I) item No 02 to 18:- (i) The entire work shall be done through OEM i.e. of M/s OTIS Elevator Co. India Ltd. (ii) The contractor will have to submit MOU as given on page No 97 & 98 from OEM of M/s OTIS Elevator Co. India Ltd. within fifteen days from date of Acceptance of tender, failing which the contract will be liable to be cancelled and further action will be taken as per policy in vogue on contractors default. (iii) The lift shall not be shut down for more than 02 days for replacement of doors. In case the lifts are shut down for more than 02 days, a penalty of Rs 2000/- per day will be levied. A register for taking shut down will be maintained by Engr-in-charge. The lift will be shut down only after approval by Engr-in-charge. Endorsement of the contractor, Engr-in-Charge & JE E/M in the register shall be maintained after completion of installation of door and its accessories.

Section-II

Taking down and Supply & fixing in replacement Latest False Ceiling system with stainless steel mirror finish suitable for 08/13 Passenger lifts installed at MES height, DGIS, Urban Village and AFMSD including 12" sweep cabin fan with grill, bracket fixing of 04 Nos LED light complete filltings including necessary wiring proper illuminatation in the lift car as per site requirement (in 08/13 passenger lift of Make : M/s Kone) G+8 storey(total 09 storey) heavy duty complete all as specified and directed by Engr-in-charge. ( Make : As per OEM recomendation)

Dismantaling/Taking down old unserviceable landing door and Supply , fixing, testing and commissioning of complete Landing door, SS hairline finish metal sheet 18 gauge approx 1.25 mm thickness SS sheet standard 304 scratch resistance including complete door header assy(i.e door hanger roller) and landing sill suitable for 08 Passenger lift Make:- Kone installed at Kargil Block, MES height, DGIS, Urban Village and AFMSD width of centre opening 800/900 mm,height of opening 2000mm, 2way center opening with all fittings as per site requirement complete all as directed by Engr-in-Charge. (Note:- (i) Rate quoted by contractor are deemed to be inclusive of complete replacement of minor spares such as Gate locks, door rollers, skates, door shoe, door rope etc and any civil work required at site for taking out/old door assy and fixing new door assy and making good disturbed surface all as directed by Engr-in-Charge. (ii) Any damage done to the door sensor while taking down shall be replace free of cost by the contractor of same make and model

Dismantaling/Taking down old unserviceable landing door and Supply , fixing, testing and commissioning of complete Landing door, SS hairline finish metal sheet 18 gauge approx 1.25 mm thickness SS sheet standard 304 scratch resistance including complete door header assy(i.e door hanger roller) and landing sill suitable for 13 Passenger lift Make:- Kone installed at MES height, DGIS, Urban Village and AFMSD width of centre opening 900 mm,height of opening 2000mm, 2way center opening with all fittings as per site requirement complete all as directed by Engr-in-Charge. (Note:- (i) Rate quoted by contractor are deemed to be inclusive of complete replacement of minor spares such as Gate locks, door rollers, skates, door shoe, door rope etc and any civil work required at site for taking out/old door assy and fixing new door assy and making good disturbed surface all as directed by Engr-in-Charge. (ii) Any damage done to the door sensor while taking down shall be replace free of cost by the contractor of same make and model

Taking down old unserviceable lift cabin and supply, fixing, commisioning and testing of comlete lift cabin SS honycomb finish metal sheet minimum 1.2mm thickness SS sheet standard 304 and scratch resistant Complete suitable for 08 passenger lift (Make:- M/s KONE) installed at Kargil Block with all fittings as per site requirement complete all as specified and directed by Engr-in-Charge.(Make:- As per OEM M/s KONE recomendation)

Supply, installation, commissioning & testing of latest technology based COP with latest type Braille push buooton assembly along with all connected accessories complete suitable for 08 passenger lifts of make M/s Kone installed lift at Kargil (Block- 01) including taking down old unserviceable one complete all as specified and directed by Engr-in-charge. (Make:- as per OEM M/s KONE recommendation)

Dismantling/ taking down existing worn out door without causing any damaged to door sensor and supply, fixing commissioning and testing of complete car door, suitable to existing lift SS Honycomb finish metal sheet minimum 1.25mm thickness SS sheet standard 304 and scratch resistant and complete door operator assembly system (i.e. door motor, door drive air card) and car sill for smooth opening of car doors suitable for 08 passenger lift (Make:- M/s KONE) width of centre opening 800mm, height of opening 2000mm, two way centre opening with gate lock, door shoe and other all fittings and refixing of taking down door sensor as per site requirement complete all as specified and directed by Engr-in-Charge.(Make:- As per OEM M/s KONE recomendation) NOTE:- (i) Rate quoted by the contractor are deemed ti be inclusive of minor spares such as gate lock, door rollers, skates, door shoe, door rope, etc. (ii) Any damaged done by the contractor of same make and model the door sensor while taking down shall be replace free of cost by the contractor for Block Kargil.)

Dismantling/Taking down old unserviceable Car door and supply, fixing, testing and commissioning of complete Car door SS Hairline finish metal sheet 18 gauge approx 1.2 mm thickness SS Sheet standard 304 and scratch resistant & complete door operator assembly system(i.e door motor, door drive, air card) and car sill for smooth opening of Car doors suitable for 08/13 passenger lift (Make:-Kone) installed at MES height, DGIS, Urban Village and AFMSD, width of centre opening 800/900 mm ,2 way cente opening all fittings, gate lock and door shoes all as directed by Engr-in-Charge.(Make :Kone) Note:-(i) Rate quoted by contractor are deemed to be inclusive of minor spares such as Gate locks, door rollers, skates, door shoe, door rope etc(ii) Any damage done to the contractor of same make and model the door sensor while taking down shall be replace free of cost by the contractor of same make & model.

Supply & fixing aluminium landing / car door sill for (Size :- 1700mm x 50mm x 30mm thick as per sample suitable for 13 passenger lifts of make Kone installed at MES height, DGIS, Urban Village and AFMSD including taking diown old uncerviceable landing / car door Sill complete all as specified and directed.

Supply & fixing aluminium landing / car door sill for (Size :- 1700mm x 50mm x 30mm thick as per sample suitable for 8 passenger lifts of make Kone installed at MES height, DGIS, Urban Village and AFMSD including taking diown old uncerviceable landing / car door Sill complete all as specified and directed.

Supply & fixing OSG rope of size 6 strands x 19 of nominal dia 6mm complete for Make Kone lifts installed at MES height, DGIS, Urban Village and AFMSD including taking out old one complete all as specified and directed by Engr-in-charge. Make : Usha Martin/ Mahadev Elevator /Bharat wire rope Ltd/Shree Steel Wire & Rope Ltd.

Supply & fixing CI OSG pit pully as per sample suitable for 08/13 passenger of M/s Kone make lifts including taking down old unserviceable one installed at MES height, DGIS, Urban Village and AFMSD complete all as specified and directed. (Make:- As per OEM recommendation)

Supply & fixing MS landing door frame 800 /900 mm opening and 3mm thick as per sample suitable for 8/13 passenger lifts of make M/s Kone including taking down old unserviceable landing doors installed at MES height, DGIS, Urban Village and AFMSD complete all as specified and directed. (Make:- As per OEM recommendation)

Note for (SECTION-II) item No 21 to 32:- (i) The entire work shall be done through OEM i.e. of M/s KONE India. (ii) The contractor will have to submit MOU as given on page No 97 & 98 from OEM of M/s KONE India within fifteen days from date of Acceptance of tender, failing which the contract will be liable to be cancelled and further action will be taken as per policy in vogue on contractors default. (iii) The lift shall not be shut down for more than 02 days for replacement of doors. In case the lifts are shut down for more than 02 days, a penalty of Rs 2000/- per day will be levied. A register for taking shut down will be maintained by Engr-in-charge. The lift will be shut down only after approval by Engr-in-charge. Endorsement of the contractor, Engr-in-Charge & JE E/M in the register shall be maintained after completion of installation of door and its accessories.

Section-III

M & L for fixing hand rails of 40 mm dia stainless steel, medium grade pipe with necessary fittings screwing for passenger/goods lifts including taking down old unserviceable hand rails complete all as specified and directed Engineer-in-Charge.

M & L for fixing of mirror 4 mm thick inside the car cabin including all acessories for passenger/ goods lifts including taking down old unservicable one complete all as specified and directed by Engineer-in-Charge.

M & L for aluminium chequered plate flooring 3 mm thick five bar pattern fixing with acssesories including necessary cutting bending, edeging, chamfering etc inside the car cabin of 8/13 passenger lifts etc complete all as specified and directed by Engineer-in-Charge.

M & L for painting of motor with gear assembly complete including ISMB (capacity 4 KW to 12 KW) installed in machine room of lift installation with two coats synthetic enamelled sky blue paint also where black paint is required and write the SM No on motor and panel with superior quality of synthetic enamelled white paint and preparing smooth surface suitable for painting complete all as specified and directed Engineer-in-Charge.

Note for (SECTION-III) item No 35 to 38:- (i) The entire work shall be done through the contractor. (ii) The rate quoted in Section III shall not be the part of rates under Section-I & Section-II.

M/s Adhikari construction co.