Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.4 LAccepted-AOC 179 URBAN ESTATE RAM TIRATH ROAD NR GURUDAWARA DARSHAN SINGH AMRITSAR PUNJAB 143001 | AMRITSAR | PUNJAB | 143001 | ₹13.4 L Quoted ₹13.7 L | L1 | Accepted-AOC lowest bidder |
| 2 | L2₹14.3 L+₹58,580 (4.28%)Rejected-Finance C O SECTOR 02 HOUSING COLONY CHANNI HIMMAT JAMMU J K PIN 180015 | JAMMU | JAMMU AND KASHMIR | 180015 | ₹14.3 L+₹58,580 (4.28%) | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER |
| 3 | L3₹14.8 L+₹1.1 L (7.96%)Rejected-Finance B 56 LANE NO 4A SECTOR 7 VASHNAVI ENCLAVE CHANNI HIMAT JAMMU 180015 | JAMMU | JAMMU AND KASHMIR | 180015 | ₹14.8 L+₹1.1 L (7.96%) | L3 | Rejected-Finance OTHER THAN LOWEST BIDDER |
| 4 | L4₹14.9 L+₹1.2 L (8.58%)Rejected-Finance | ₹14.9 L+₹1.2 L (8.58%) | L4 | Rejected-Finance OTHER THAN LOWEST BIDDER |
| 5 | L5₹15.7 L+₹2.0 L (14.5%)Rejected-Finance | ₹15.7 L+₹2.0 L (14.5%) | L5 | Rejected-Finance OTHER THAN LOWEST BIDDER |
| Sl No | Description | Qty | Unit | Hi Tech Engineers L6 | MAMTA ENTERPRISES L2 | Mahajan Construction Co L1 | ANIKET TRADERS L3 | M/S GRD ENGINEERS L4 | ASHOKKUMAR SURI L5 | HARSH ELECTRICAL STORE L8 | VIDHATA ELECTRICALS L7 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Repair of existing street light/Security light of any type or discription, fixed in vertical position with poles/wall/Boundry wall including disconnecting the electric connection, removing from pole/wall/Boundry wall if required, carrying out minor repairs like disconection of wire/cable, detecting and repair of UG cable fault, cleaning of carbon on OH/UG line and replacing starter/fuses,etc as required at site to make the items functional and refixing the same at same location or any other location, connecting with electric feeder and testing for functioning engaging sufficient man power and tool and plant etc to ensure safety of light/pole as well as working persons complete all as specified and directed.
Note : (i) The un-serviceable items shall be replaced under respective items of relevent schedule as below .
(ii) T&P viz tools , Trolly mounted transportation veh with operator, ladder any type are provided by the contractor to the electrician party.
(iii) The contractor shall be rectified the street light complaint on priority within the 04 hrs. One complaint shall be considered as one Job.
(iv) Everyday one electrician and one helper shall be check all Street light & security light whole the area of 23 Wing
(v) All safety precaution will be taken by the Electrician/Helper incase of any lapse contractor will be responsible for the same.
(vi) Before climbimg on parameter light contractor shall ensure that there is no power supply on parameter fencing by concerned AF Department.
(vii) In addition with domestic area complaints contractor shall attend the compaints of all wing area if there is any emergency or requirement. | 400 | Each Job | 200 ₹80,000 | 200 ₹80,000 | 20 ₹8,000 Lowest | 100 ₹40,000 | 100 ₹40,000 | 90 ₹36,000 | 50 ₹20,000 | 80 ₹32,000 |
| 2.00 | S&F in replacement capacity luminaires 45 watt LED >5700K with driver of new street light/security light IP 66,Operating Voltage 140-270 Volts, PF (0.90),LED driver current > 850 mA,external Surge Voltage Protection,toughned class,indl LED with secondary lens incl making electric connection using two run of 1.5 sqmm single core unarmoured wire min length 1.5mtr complete all as specified and directed by Engr-in-Charge. | 50 | Each | 1,200 ₹60,000 Lowest | 1,200 ₹60,000 Lowest | 1,500 ₹75,000 | 1,800 ₹90,000 | 1,350 ₹67,500 | 1,750 ₹87,500 | 1,800 ₹90,000 | 1,650 ₹82,500 |
| 3.00 | S&F in replacement capacity luminaires 60 watt LED >5700K with driver of new street light/security light IP 66,Operating Voltage 140-270 Volts, PF (0.90),LED driver current > 850 mA,external Surge Voltage Protection,toughned class,indl LED with secondary lens incl making electric connection using two run of 1.5 sqmm single core unarmoured wire min length 1.5mtr complete all as specified and directed by Engr-in-Charge. | 40 | Each | 1,800 ₹72,000 Lowest | 1,800 ₹72,000 Lowest | 2,600 ₹1,04,000 | 2,200 ₹88,000 | 1,990 ₹79,600 | 1,950 ₹78,000 | 2,500 ₹1,00,000 | 2,433 ₹97,320 |
| 4.00 | S&F in replacement capacity luminaires 90 watt LED >5700K with driver of new street light/security light IP 66,Operating Voltage 140-270 Volts, PF (0.90),LED driver current > 850 mA,external Surge Voltage Protection,toughned class,indl LED with secondary lens incl making electric connection using two run of 1.5 sqmm single core unarmoured wire min length 1.5mtr complete all as specified and directed by Engr-in-Charge. | 20 | Each | 2,400 ₹48,000 | 2,600 ₹52,000 | 3,200 ₹64,000 | 2,800 ₹56,000 | 2,350 ₹47,000 Lowest | 2,350 ₹47,000 Lowest | 2,800 ₹56,000 | 2,950 ₹59,000 |
| 5.00 | S&F capacity luminaires 100 watt LED >5700K with suitable bracket and nut bolt of new Flood light IP 66,Operating Voltage 140-270 Volts, PF (0.90),LED driver current > 850 mA,Surge external Surge Voltage Protection,toughned class,indl LED with secondary lens incl making electric connection using two run of 1.5 sqmm single core unarmoured wire min length 1.5mtr complete all as specified and directed by Engr-in-Charge. | 10 | Each | 2,200 ₹22,000 Lowest | 3,000 ₹30,000 | 3,800 ₹38,000 | 3,200 ₹32,000 | 2,800 ₹28,000 | 2,750 ₹27,500 | 3,000 ₹30,000 | 2,830 ₹28,300 |
| 6.00 | S&F capacity luminaires 120 watt LED >5700K with suitable bracket and nut bolt of new Flood light IP 66,Operating Voltage 140-270 Volts, PF (0.90),LED driver current > 850 mA,external Surge Voltage Protection,toughned class,indl LED with secondary lens incl making electric connection using two run of 1.5 sqmm single core unarmoured wire min length 1.5mtr complete all as specified and directed by Engr-in-Charge. | 12 | Each | 3,200 ₹38,400 | 3,200 ₹38,400 | 3,200 ₹38,400 | 3,700 ₹44,400 | 3,600 ₹43,200 | 2,900 ₹34,800 Lowest | 3,000 ₹36,000 | 3,950 ₹47,400 |
| 7.00 | S&F capacity luminaires 150 watt LED >5700K with suitable bracket and nut bolt of new Flood light IP 66,Operating Voltage 140-270 Volts, PF (0.90),LED driver current > 850 mA,external Surge Voltage Protection,toughned class,indl LED with secondary lens incl making electric connection using two run of 1.5 sqmm single core unarmoured wire min length 1.5mtr complete all as specified and directed by Engr-in-Charge. | 15 | Each | 4,000 ₹60,000 | 4,100 ₹61,500 | 5,200 ₹78,000 | 4,000 ₹60,000 | 4,000 ₹60,000 | 3,500 ₹52,500 | 3,200 ₹48,000 Lowest | 6,850 ₹1,02,750 |
| 8.00 | S&F LED aviation light 10 watt, rating voltage 215-240 V including necessary connection with two run of 1.50 sqmm single core unarmoured copper cable from junction box to High raised building/OH Water Tank/Tower etc fixed in repairs, complete all as specified and directed by Engr-in-Charge.
Note :(i) A certificate from the manufactures for warranty minimum upto 3 years shall be obtained and submitted to the AGE/GE
(ii) Any touch up of the existing surface due to changing of fittings shall be done by contractor with similar surface finish without extra cost to the deptt. | 8 | Each | 3,350 ₹26,800 | 1,000 ₹8,000 Lowest | 3,500 ₹28,000 | 2,000 ₹16,000 | 1,200 ₹9,600 | 3,000 ₹24,000 | 1,000 ₹8,000 Lowest | 1,200 ₹9,600 |
| 9.00 | M&L for repair to existing LED street light fitting 45 Watt to 60 Watt of any make including supply and replacement of driver, LED Strips and other minor allied items required at site to make the light fitting serviceable complete all as specified and directed by Engineer-in-Charge. | 20 | Each | 300 ₹6,000 | 250 ₹5,000 | 200 ₹4,000 | 555 ₹11,100 | 250 ₹5,000 | 300 ₹6,000 | 200 ₹4,000 | 50 ₹1,000 Lowest |
| 10.00 | M&L for repair to existing LED street light fitting 90 Watt to 100 Watt of any make including supply and replacement of driver, LED Strips and other minor allied items required at site to make the light fitting serviceable complete all as specified and directed by Engineer-in-Charge. | 15 | Each | 300 ₹4,500 | 350 ₹5,250 | 200 ₹3,000 | 555 ₹8,325 | 300 ₹4,500 | 300 ₹4,500 | 220 ₹3,300 | 80 ₹1,200 Lowest |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
23 Aug 2025, 6:00 pmClosed
GE AF Jammu
GE AF Jammu
REPAIR REPLACEMENT AND DAY TO DAY MAINTENANCE OF PERIMETER SECURITY LIGHTS STREET LIGHTS BUILDING SECURITY LIGHTS POST TOP LANTERN GARDEN LIGHTS HIGH MASTS IN DOMESTIC AREA AT AF STN JAMMU UNDER GE AF JAMMU
2025_MES_721987_1
CA NO GE/AFJ-38/2025-26
Open Tender
Civil Works
Item Rate
180 days
JAMMU
please refer tender document
8 documents required · 8 mandatory
₹500
GE AF JAMMU
₹40,000
Yes
3 Oct 2025
23 Jul 2025
30 Aug 2025
23 Jul 2025
23 Aug 2025
9 Aug 2025
Amount
Repair of existing street light/Security light of any type or discription, fixed in vertical position with poles/wall/Boundry wall including disconnecting the electric connection, removing from pole/wall/Boundry wall if required, carrying out minor repairs like disconection of wire/cable, detecting and repair of UG cable fault, cleaning of carbon on OH/UG line and replacing starter/fuses,etc as required at site to make the items functional and refixing the same at same location or any other location, connecting with electric feeder and testing for functioning engaging sufficient man power and tool and plant etc to ensure safety of light/pole as well as working persons complete all as specified and directed. Note : (i) The un-serviceable items shall be replaced under respective items of relevent schedule as below . (ii) T&P viz tools , Trolly mounted transportation veh with operator, ladder any type are provided by the contractor to the electrician party. (iii) The contractor shall be rectified the street light complaint on priority within the 04 hrs. One complaint shall be considered as one Job. (iv) Everyday one electrician and one helper shall be check all Street light & security light whole the area of 23 Wing (v) All safety precaution will be taken by the Electrician/Helper incase of any lapse contractor will be responsible for the same. (vi) Before climbimg on parameter light contractor shall ensure that there is no power supply on parameter fencing by concerned AF Department. (vii) In addition with domestic area complaints contractor shall attend the compaints of all wing area if there is any emergency or requirement.
S&F in replacement capacity luminaires 45 watt LED >5700K with driver of new street light/security light IP 66,Operating Voltage 140-270 Volts, PF (0.90),LED driver current > 850 mA,external Surge Voltage Protection,toughned class,indl LED with secondary lens incl making electric connection using two run of 1.5 sqmm single core unarmoured wire min length 1.5mtr complete all as specified and directed by Engr-in-Charge.
S&F in replacement capacity luminaires 60 watt LED >5700K with driver of new street light/security light IP 66,Operating Voltage 140-270 Volts, PF (0.90),LED driver current > 850 mA,external Surge Voltage Protection,toughned class,indl LED with secondary lens incl making electric connection using two run of 1.5 sqmm single core unarmoured wire min length 1.5mtr complete all as specified and directed by Engr-in-Charge.
S&F in replacement capacity luminaires 90 watt LED >5700K with driver of new street light/security light IP 66,Operating Voltage 140-270 Volts, PF (0.90),LED driver current > 850 mA,external Surge Voltage Protection,toughned class,indl LED with secondary lens incl making electric connection using two run of 1.5 sqmm single core unarmoured wire min length 1.5mtr complete all as specified and directed by Engr-in-Charge.
S&F capacity luminaires 100 watt LED >5700K with suitable bracket and nut bolt of new Flood light IP 66,Operating Voltage 140-270 Volts, PF (0.90),LED driver current > 850 mA,Surge external Surge Voltage Protection,toughned class,indl LED with secondary lens incl making electric connection using two run of 1.5 sqmm single core unarmoured wire min length 1.5mtr complete all as specified and directed by Engr-in-Charge.
S&F capacity luminaires 120 watt LED >5700K with suitable bracket and nut bolt of new Flood light IP 66,Operating Voltage 140-270 Volts, PF (0.90),LED driver current > 850 mA,external Surge Voltage Protection,toughned class,indl LED with secondary lens incl making electric connection using two run of 1.5 sqmm single core unarmoured wire min length 1.5mtr complete all as specified and directed by Engr-in-Charge.
S&F capacity luminaires 150 watt LED >5700K with suitable bracket and nut bolt of new Flood light IP 66,Operating Voltage 140-270 Volts, PF (0.90),LED driver current > 850 mA,external Surge Voltage Protection,toughned class,indl LED with secondary lens incl making electric connection using two run of 1.5 sqmm single core unarmoured wire min length 1.5mtr complete all as specified and directed by Engr-in-Charge.
S&F LED aviation light 10 watt, rating voltage 215-240 V including necessary connection with two run of 1.50 sqmm single core unarmoured copper cable from junction box to High raised building/OH Water Tank/Tower etc fixed in repairs, complete all as specified and directed by Engr-in-Charge. Note :(i) A certificate from the manufactures for warranty minimum upto 3 years shall be obtained and submitted to the AGE/GE (ii) Any touch up of the existing surface due to changing of fittings shall be done by contractor with similar surface finish without extra cost to the deptt.
M&L for repair to existing LED street light fitting 45 Watt to 60 Watt of any make including supply and replacement of driver, LED Strips and other minor allied items required at site to make the light fitting serviceable complete all as specified and directed by Engineer-in-Charge.
M&L for repair to existing LED street light fitting 90 Watt to 100 Watt of any make including supply and replacement of driver, LED Strips and other minor allied items required at site to make the light fitting serviceable complete all as specified and directed by Engineer-in-Charge.
M&L for repair to existing LED Flood light fitting 100 Watt to 150 Watt of any make including supply and replacement of driver, LED Strips and other minor allied items required at site to make the light fitting serviceable complete all as specified and directed by Engineer-in-Charge.
Labour only for taking down and lifting up high mast light fitting including replacing the unserviceable items to make the fitting serviceable ,serving, greasing of steel rope and adjust/repair the timer, S&F in replacement the contacts lifting mechanism with all accessories as required, complete all as directed by the Engineer-in-Charge. Note :- LED Strip & LED Drivers will be measured and paid separately
S&F in replacement outdoor type Tiranga LED Rope light suitable for 9/11 mtr electric PCC/Steel Pole decorative, Operting Voltage 140-270 Volts 240V AC Supply 50Hz supply connection from down side Jn box including driver and two run of 1.5 sqmm single core unarmoured wire from Junction box complete all as specified and directed by Engr-in-Charge.
S&F single core PVC insulated unshesthed cable copper conductor of size 1.5 sqmm multistranded drawing in non-metalic PVC rigid conduit complete all as specified and directed. (Note;- PVC Conduit will be Measure and paid seperatly as relevent item.)
S&F single core PVC insulated unshesthed cable copper conductor of size 2.5 sqmm multistranded drawing in non-metalic PVC rigid conduit complete all as specified and directed. (Note;- PVC Conduit will be Measure and paid seperatly as relevent item.)
S&F single core PVC insulated unshesthed cable copper conductor of size 10sqmm multistranded for panel wiring complete all as specified and directed.
S&F in replacement Electronic Ignitors for HPSV/MH Lamps suitable for 70/150/250 watt HPSV/MH light fitting complete all as specified and directed.
S&F in replacement Open Construction copper ballast (Choke) suitable for 150 watt HPSV/MH light fitting complete all as specified and directed.
S&F in replacement HPSV lamp 150 watt, tubular/oval type complete all as specified and directed.
S&F PVC insulated heavy duty twin core 2.5 Sqmm Copper cable with an inner sheathing of PVC tape and over all PVC Sheathed in multi stranded conductor 1100 volts grade incl taking down old unserviceable one.
S&F PVC insulated heavy duty Four core 2.5 Sqmm Copper cablewith an inner sheathing of PVC tape and over all PVC Sheathed insulated multi stranded conductor 1100 volts grade incl taking down old unserviceable one.
S&F in replacement thermoplastic polycarbonate cable junction box hinged door type of size 200x160x 98 mm for 3 Phase and Nutral incoming cable, 3 Phase and Nutral outgoing cable and single Phase & Nutral connection for light fitting with aluminiuam bus bar of 25 x 3mm strip, 4 pole, 415 volt with insulator porceline and one MCB sp 6 Amp, 240 Volt and clamp system (screw less), shock proof safe IP-55, weather proof, rust, dust and water proof internally embedded gasket with provision for cable entry through gland alongwith MS clamps and mounting brackets as required at site complete all as specified & directed.
S & F street light control panel Max Load 6KW in and including 32A TP contactor, programmable time switch and MCB TPN 40A should conforms to IS/EIC 60947-4-1 with protection degree IP-54, making it suitable for outdoor installation. It should have extended wide band coil & FRLS internal wiring. in built short-circuit protection should be provided and complies with class H insulation complete all as specified and directed by Engr-in-Charge. Make: L&T, Havells,Schneider, Indo asian, ABB.
S&F in replacement multible cable service connection PVC boxes weather proof for outdoor installation including fixing accessories suitable for Cable Size 16/25/35 Sqmm, Box Dimensions as per exsisting complete all as spcefied and directed by Engr-in- charge.
S&F Rigid non-metallic PVC conduit 25mm dia (Heavy duty) in concealed exclusive of boxes (junction/terminal) but inclusive of all tees, bends,elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. including taking out old conduit complete all as specified and directed.
S&F MCB SPN 40 Amps C Curve 25 KA with Sheet metal encloser, complete all as specified and directed.
S&F MCB Single Pole Neutral 16/25 Amps C Curve 25 KA with Sheet metal encloser, complete all as specified and directed.
S&F Sheet metal encloser,DB Two Way complete all as specified and directed.
S&F LED Post top light 25W 5700K made in die cast aluminium bottom housing and spun aluminium top reflector with decorative PMMA Opal and clear diffuser and IP65 protection complete all as specified and directed by Engr-in-Charge. Make: Bajaj Cat part No - BGCTN 25W LED WH or equivalent in approved makes.
S&F LED Post top light 45W 5700K made in die cast aluminium bottom housing and spun aluminium top reflector with decorative PMMA Opal and clear diffuser and IP65 protection complete all as specified and directed by Engr-in-Charge. Make: Bajaj Cat part No - BGCTN 45W LED WH or equivalent in approved makes.
S&F LED Garden light 9 W 5700K made in die cast aluminium alloy spigot and optical grade PMMA diffuser and IP65 protection complete all as specified and directed by Engr-in-Charge. Make: Bajaj Cat part No - LB14-131-XXX-6565 or equivalent in approved makes.
S&F LED Road signal light(Red/Yellow/Green) made in die cast aluminium alloy and IP66 protection complete all as specified and directed by Engr-in-Charge.
S&F LED landsscape lights 9W 3000K spike/Bush light with die cast aluminium housing designed for rugged outdoor usage and IP65 protection complete all as specified and directed by Engr-in-Charge.
S&F PVC insulated sheathed service wire twin core 04 Sqmm aluminium multi stranded conductor 1100 volts grade incl taking down old unserviceable one.
S&F PVC insulated sheathed service wire twin core 06 Sqmm aluminium multistranded conductor 1100 volts grade incl taking down old unserviceable one.
S&F PVC insulated sheathed service wire twin core 10 Sqmm aluminium multistranded conductor 1100 volts grade incl taking down old unserviceable one.
S&F PVC insulated sheathed service wire twin core 16 Sqmm aluminium multistranded conductor 1100 volts grade incl taking down old unserviceable one.
Preparation of old painted surface of 9 Mtr. steel tubular poles above the top of PCC coping. Painting of pole from top of coping to a height of 1.5mtr with two coats of synthetic enamel paint in white and sky blue alternate strip and painting the rest portion of pole of (approx length 7 mtr)including painting of cross arms/clamps etc complete with two coats of synthetic enamel aluminium paint and to the entire satisfaction of Engineer-in-Charge complete all as specified and directed
Supply and laying of DWC (Double Wall Corrugated) HDPE Pipe, ISI Marked IS 16205 Part-II, of outer dia of 77 mm and inner dia 63 mm with smooth internal and profiled external surface for non pressure under ground cable including all connected accessories like coupler, 'O' Ring etc, for protection of cable complete all as specified and as directed
M & L for Preparation of old cement based painted surfaces of RCC pole 9 mtr by cleaning of deposited materials, and painting with one coat of exterior emulsion weather coat paint of approved make and colour above the top of PCC coping. Painting of pole from top of coping to a height of 1.5mtr with two coats of synthetic enamel paint in white and sky blue alternate strip complete all as specified and directed by Engineer-in-Charge
S & F LT Cable End termination joining kit heat shrinkabale complete with jointing materials suitable for LT Armoured cable of size 10 to 35 Sqmm all as directed.
S & F LT Cable End Termination joining kit heat shrinkabale complete with jointing materials suitable for LT Armoured cable 3.5 core of size 50 to 95 Sqmm all as directed.
Supply , installation , Commissiong & Testing of outdoor LT feeder pillar compartmentalised design of size not less than 70 x 70 x 25 cm suitable for 440 volt 3 phase 4 wire system made out of 3.15mm CRCA sheet powder coated having gasketed front two hinged doors with locking arrangement including bottom and top detachable gland plate complete with suitable size of rust proof nuts, bolts, and washers etc.. complete with mounting accessories including the following components :-(a) Four 30cms long Aluminium bus bar capacity 160 Amp mounted on epoxy insulators provided with rust proof nuts bolts and washers (b) LED indicating lamps - 3 nos. (Red ,Yellow, Blue) (c ) MCCB 100 Amp 4 Pole 25 KA with adjustable thermal and fixed magnetic setting as a Incomer Complete All as specified and directed.
M&L for earth continuity conductor or main earthing lead using 4 mm dia galvanised iron or steel wire fixed to wall on batten or recess or chases or burried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required including taking down old wire complete all as specified and directed by Engineer-in-Charge.
M&L for earth continuity conductor or main earthing lead using 25 x 4mm galvanised steel strip fixed to wall on batten or recess or chases or burried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation, etc. as required including porcelain insulator saddle at the spacing nort exceeding 400mm including taking down old strip complete all as specified and directed by Engineer-in-Charge.
M&L for PCC 1:3:6 type C-2 using 20mm graded crushed stone aggregate as in pole pole foundation, coping, stay pits etc including provision of necessary form work i.e road cutting to aachieve fair finishes surfaces, complete alal as specified and directed.
Supply and laying & testing UG cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm, 4 core, complete including disconnecting and taking out old existing unserviceable cable all as specified and directed by Engr-in-Charge.
All as per srl item No47 here-in-before but of size 25 Sqmm 3.5 Core.
All as per srl item No 47 here-in-before but of size 35 Sqmm 3.5 Core.
All as per srl item No 47 here-in-before but of size 50 Sqmm 3.5 Core.
Taking out carefully manually by excavation of existing LT/HT cable with loops and relaying with DWC pipe/brick the same after repair of cutting the damages / burnt parts of cable and reconnecting its into original positions complete with cable joints all as specified and directed by Engineer-in-Charge.Note:-(i) HT/LT Cable Joint & DWC Pipe/Brick will be measured and paid sepearetly. (ii) Unit rate shall be included in excavation and returning filling. (iii) Handling of UG cable to working site as ordered shall be carried out by the firm and rate for the same shall deem to be included in the unit rate.
Re-Laying only of serviceable brick / PCC slab cover obtained from item 40here-in-before for cable protection cover laid width wise along length of cable complete all as specified and as directed.
Supply, install and erect in true vertical position (or to be fixed in an inclined position as strut pole) steel tubular swaged poles complete with MS base plate of 6 mm thick of size 300 mm x 300 mm, finial taper plug, pole cap, bolts, nuts and washers and screwed pole made out of FRW MS tubing conforming to IS-2713 (Part-II) 1980 type 410-SP-31 ( 9 meters long ) pole including drilling of holes of required size and Nos for fixing of cross arms, painting with one coat of red oxide primer and two coats of aluminium paint for exposed surfaces and two coats of black bituminous paint for portion embeded in concrete, etc complete all as specified and directed
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out in any type of soil for laying of LT UG cables complete. Note:- The Rate quoted deemed to including cutting and removal of PSP Sheets wherever occured during excavation and the same shall be staged at desired location as directed at site
Returning, filling in, including spreading levelling, watering and well ramming in layers not exceeding 25 cm thick in hard dense soil
Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point
S&F GI tubing light grade 40mm dia along the wall/in trenches/in duct/in culvert/road crossing/garden light/decorative road light and including provisioning of suitable mild steel flat iron clamps and bolts, nuts and double washers etc for holding of GI pipe alongwith poles including taking out old broken GI pipes, complete all as specified and as directed by Engr-in-Charge.
All as per srl item No 57 here-in-before but of dia 50 mm.
All as per srl item No 57 here-in-before but of dia 80 mm.
S&F in repairs ISI mark aluminium thimbles suitable for under ground LT cables of sizes 16/25 sqmm including cutting of exsting burn/dammaged cable after disconnecting from exsting position ,extending the cable from cable loop including neccesory earth work and reconnecting the same.
All as per srl item No 60 here-in-before but of size 35/50 Sqmm
All as per srl item No 60 here-in-before but of size 70/95 Sqmm
All as per srl item No 60 here-in-before but of size 400 Sqmm
S & F cable route indicator made out of 45 x 45 x 5 mm angle iron, 80 mm long embedded in PCC block of suitable size with moulded lettter HT CABLE or LT CABLE suitably incribed on CI circular plate 8 mm thick 100 dia complete incl neccessary PCC 1:3:6, type C-2 (using 40 mm graded aggrregate) block of suitable size and neccessary earth work and excavation all as specified and directed.
M&L for road cutting, including excavation, returning filling in, spreading, leveling, well ramming in layers, soiling with broken boudders/stones, WBM 7.5 cm thick coarse aggregate received from dismentling the existing road, premix, carpeting 25 mm thick using ready mix patch mate material, rolled and compacted for road patch repair work complete all as specified and directed.
Dismantling of interlocking cement concrete (any thickness/size), on floor fixed in cement mortar in single layer complete all as specifed and directed.
M & L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS- 15658-2006 of 60mm thickness , M-35 grade, with grey cement and pigment. Complete all as specified and directed.
All as per srl item No 67 above but except interlocking cement concrete tiles, (Any thickness/size) (old interlocking tiles obtained from srl items No 30, Complete all as specified and directed.
M & L 25 mm thick sand fillimg under floor/interlocking tiles etc Complete all as specified and directed.
Demolition of cement concrete in ground floors and paving not exceeding 15cm thickness (below or above ground level) and disposing the rubbish to a distance exceeding
M & L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) in sub base of floor finishing foundation filling and mass concrete , complete all as specified and directed.
Supply only LT Insulation tape High quality size minimum 20 mtr long x 1.8 CM width complete.
S&F street light mounting bracket made out of GI pipe 40 mm dia medium Grade not less than with 1.5 m.long in any shape and painting with aluminium paint,all as direced by Engr in Charge
S&F solar street light luminaire efficacy of 120 lumen/watt and system wattage of 30 watt having compact and fully integrated design with intelligent features includes a built in solar Panel, lithium Ferro phosphate Battery, charge Controller and Motion sensor including all fixing accessories for existing pole complete all as specified and direced by Engr in Charge.
S&F in replacement outdoor type LED Rope (wave AC Rope 60D Strip IP65 50mtr long Rope) bright & even illumination with 270 lm/m light output, warm white colour Operting Voltage 140-270 Volts AC Supply 50Hz supply connection complete all as specified and directed by Engr-in-Charge.
M&L for cleaning away all grass vegetation, scapling shrubs bushes under grouth roots and trees not exceding 30 cm grith and removing rubbish upto distance of 50 mtr out the periphery of area under cleaness complete all as specified and directed.
Supply and spraying anti vegetation chemical liquid of 1ltrs bottle mixed with water as per direction of Engr in charge .Make: Round Off
Exacavation for cables loops near the poles LT Panels transformers, cutting the damages/burnt parts of cable and reconnecting its positions complete with thimbles, nut bolts, sleaves all as specified and directed by Engineer-in-Charge.
M&L for LT panel preparing old painted surface of panel board by cleaning removing of old paint by scratching with wire brush / sand paper etc and including denting of broken / rusted surface and applied two coat of synthetic surface enamel paint by spray painting outside surface of panel as existing colour of panel incl door hinges welding complete all as specified and directed.
S&F in replacement of micro-controller based automatic mains failure controller for on/Off power command for automatic shifting supply for capacity of 160 to 250 KVA DG including wiring and commissioning complete all as specified and directed by Engineer-in-Charge.
S&F in replacement of LED bulb 9 watt, (6500K) Screw/ pin type lumino for normal batten holder/pendant holder complete all as specified and as directed.
S&F in replacement of MCCB 350 Amps 4 pole 36 KA with adjustable thermal and fixed magnetic setting, complete all as specified and directed.
S&F in replacement of MCCB 250 Amps 4 pole 35 KA with Sheet metal encloser with adjustable thermal and fixed magnetic setting, complete all as specified and directed.
S&F in replacement of MCCB 160 Amps 4 pole 36 KA with Sheet metal encloser with adjustable thermal and fixed magnetic setting, complete all as specified and directed.
S&F in replacement of MCCB 160 Amps 4 pole 25 KA adjustable thermal and fixed magnetic setting, complete all as specified and directed.
S&F in replacement of MCCB 100 Amps 4 pole 25 KA with Sheet metal encloser with adjustable thermal and fixed magnetic setting,complete all as specified and directed.
S&F in replacement of MCCB 100 Amps 4 pole 25 KA adjustable thermal and fixed magnetic setting, complete all as specified and directed.
S&F in replacement of on load change over 315 Amp 4 pole complete with with Sheet metal encloser incl operating handle and dismantling/connection of existing cables complete as specified and directed by Engineer-in-Charge.
Sand cushioning to under ground cable, provided with 8 cm thick layer before laying the cable and 15 cm thick layer after laying and stretching the cable complete all as specified and directed.
SCHEDULE 'A' PART-II (Schedule of credit) Credit amount of Rs (Refer schedule of credit) for retrieved material mentioned in Sch 'A' Part-II of Tender documents in PDF form will be deducted offline during acceptance of tender of lowest bidder.
MAMTA ENTERPRISES (BID ID -3403437)
ANIKET TRADERS (BID ID -3396662)
M/S GRD ENGINEERS (BID ID -3393739)
ASHOKKUMAR SURI (BID ID -3396268)
Hi Tech Engineers (BID ID -3393751)
VIDHATA ELECTRICALS (BID ID -3395948)
HARSH ELECTRICAL STORE (BID ID -3387919)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .