Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹7.1 LAccepted-AOC R O 218 05 OPP J D A COMPLEX TRIKUTA NAGAR JAMMU J K PIN 180020 | JAMMU | JAMMU AND KASHMIR | 180020 | ₹7.1 L Quoted ₹7.3 L | 1 | Accepted-AOC BEING LOWEST BIDDER |
| 2 | 2₹8.0 L+₹66,996.10 (9.18%)Rejected-Finance H O WANI HOUSE II SHOWPORA SRINAGAR J K | ₹8.0 L+₹66,996.10 (9.18%) | 2 | Rejected-Finance BEING NOT LOWEST BIDDER |
| 3 | Rejected-Technical HOUSE NO 95 STREET NO 08 JAWAHAR COLONY NEAR LAXMI DAIRY FARIDABAD SECTOR 22 HARYANA 121005 | FARIDABAD | HARYANA | 121005 | - | - | Rejected-Technical Rejected due to not being category as per NIT. |
| 4 | Rejected-Technical HOUSE NO 102 LANE NO 4 C ANAND NAGAR BOHRI JAMMU 180002 J K | JAMMU | JAMMU AND KASHMIR | 180002 | - | - | Rejected-Technical Rejected due to No Remarks in WLR in QE Dec 2025 HQ NC Ser No 114. |
| Sl No | Description | Qty | Unit | M/S WEB COMPNAY L2 | M/S ZTECH L1 |
|---|---|---|---|---|---|
| 1.00 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in Hard/Dense soil complete all as specified and directed by the engr in charge. | 1.57 | Cum | 430 ₹675.1 | 400 ₹628 Lowest |
| 2.00 | M&L for Cement concrete in foundations, filling and mass concrete Type D2 1:4:8 (40 mm graded aggregate) complete all as specified and directed by the engr in charge. | 0.43 | Cum | 10,500 ₹4,515 | 10,300 ₹4,429 Lowest |
| 3.00 | M&L for Pre-cast cement concrete block Type C1 1:3:6 (20mm graded aggregate ) masonry with solid blocks, exc. 10 cm in width and setting in mortar, complete Set in cement mortar 1:4 complete all as specified and directed by the engr in charge. | 1.79 | Cum | 13,400 ₹23,986 | 13,000 ₹23,270 Lowest |
| 4.00 | M&L for Rendering in 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces to be finished even and smooth (without using extra lime or cement) complete all as specified and directed by the engr in charge. | 7.73 | Sqm | 580 ₹4,483.4 | 530 ₹4,096.9 Lowest |
| 5.00 | M&L for Rendering in 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces to be finished even and smooth (without using extra lime or cement) complete all as specified and directed by the engr in charge. | 10.54 | Sqm | 680 ₹7,167.2 | 630 ₹6,640.2 Lowest |
| 6.00 | M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by the engr in charge. | 187.65 | Kg | 180 ₹33,777 | 140 ₹26,271 Lowest |
| 7.00 | Ditto, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed by the engr in charge. | 2.47 | Kg | 140 ₹345.8 Lowest | 140 ₹345.8 Lowest |
| 8.00 | M&L for RCC Type B0 1:2:4 (12.5mm graded graded aggregate) as in lintels Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by the engr in charge. | 0.03 | Cum | 14,800 ₹444 | 14,600 ₹438 Lowest |
| 9.00 | M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for Rough finished surfaces of concrete complete all as specified and directed by the engr in charge. | 0.39 | Sqm | 830 ₹323.7 | 790 ₹308.1 Lowest |
| 10.00 | M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed by the engr in charge. | 69.15 | Kg | 190 ₹13,138.5 Lowest | 190 ₹13,138.5 Lowest |
Tender Value
₹7.4 L
EMD Value
₹20,000
Closing Date
2 Jun 2026, 6:00 pmClosed
AGE (I) NIMU
AGE (I) NIMU PIN-901312 c/o 56 APO
PROVN OF INCINERATOR FOR BURNING WASTER PAPER OF 118 (I) INF BDE GP OMC AT NIMU MIL STN AND SPL REPAIR TO RE-WIRING LIGHTING AND FIXTURE IN OR COOK HOUSE BLDG NO T 115 T 116 DIMENSION OF 20.8M X 6.10M X 7.2M RESPECTIVELY OF 108 MED REGT AT NURLA
2026_MES_765445_1
AGE(I)/NIT-25/2026-27
Open Tender
Miscellaneous Works
Item Rate
180 days
NIMU
PLEASE REFER TENDER DOCUMENTS
9 documents required · 9 mandatory
₹500
AGE (I) NIMU
₹20,000
1 Aug 2026
14 May 2026
9 Jun 2026
14 May 2026
2 Jun 2026
28 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in Hard/Dense soil complete all as specified and directed by the engr in charge. | - | Cum | - | - |
| 2 | M&L for Cement concrete in foundations, filling and mass concrete Type D2 1:4:8 (40 mm graded aggregate) complete all as specified and directed by the engr in charge. | 1 | Cum | - | - |
| 3 | M&L for Pre-cast cement concrete block Type C1 1:3:6 (20mm graded aggregate ) masonry with solid blocks, exc. 10 cm in width and setting in mortar, complete Set in cement mortar 1:4 complete all as specified and directed by the engr in charge. | - | Cum | - | - |
| 4 | M&L for Rendering in 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces to be finished even and smooth (without using extra lime or cement) complete all as specified and directed by the engr in charge. | - | Sqm | - | - |
| 5 | M&L for Rendering in 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces to be finished even and smooth (without using extra lime or cement) complete all as specified and directed by the engr in charge. | 1 | Sqm | - | - |
| 6 | M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by the engr in charge. | - | Kg | - | - |
| 7 | Ditto, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed by the engr in charge. | - | Kg | - | - |
| 8 | M&L for RCC Type B0 1:2:4 (12.5mm graded graded aggregate) as in lintels Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by the engr in charge. | - | Cum | - | - |
| 9 | M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for Rough finished surfaces of concrete complete all as specified and directed by the engr in charge. | - | Sqm | - | - |
| 10 | M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed by the engr in charge. | - | Kg | - | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.54 MB
BOQ_857289.xls
BOQ • 0.41 MB
Tender25.pdf
Tender Documents • 1.65 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .