REPAIR AND MAINT OF ROOFING FLOORING CEILING WOODEN AND STEEL JOINERY SANITARY FITTINGS AND OTHER MISC WORKS AT OLD AIR FIELD UNDER GE 970 EWS

Amount

Taking down chowkats or frames with shutter (without taking off shutter from the frames) n. exc 1.50 Sqm each complete all as specified and directed.

Taking down chowkats or frames with shutter (without taking off shutter from the frames) exc. 1.50 Sqm n.exc 4 Sqm each complete all as specified and directed.

Taking down shutters of any description exc 1.00 Sqm and n exc 2.00 Sqm each complete all as specified and directed.

Taking down shutters of any description n exc 1.00 Sqm complete all as specified and directed.

S&F 2nd class hardwood plain solid, straight chowkat and frames, wrought, framed rebated (one or more rebated) on the solid, rounded or chamfered put together with glue pinned at joints all as specified in and directed.

S&F factory made 35 mm thick, 2nd class hardwood glazed and skeleton shutters, open rebated and prepare to receive gauge etc (with sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for secruing glass/gauge etc size of member of shutter as specified in SSR Part-I Section 8 Clause 8.20(a), fitted to chowkats complete all as specified and directed.

S&F factory made 30 mm thick 2nd class hard wood glazed and skeleton shutters open rebated prepared to receive glass, gauge etc. (sash bars as required) edges of framing plain, chamfered or rounded, cut or mitred beads for screwing glass etc. Sizes of members of shutters as specified in SSR Part - I, Section 8, Clause 8.20(b) complete all as specified and directed.

S&F factory made 35mm made shutters plain framed, panelled shutter with lock rail and panel of 9 mm BWP commercial ply or 12 mm to 15mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part - I) kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F factory made solid PVC door Frame of size 50 mm x 47 mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube in opening complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and directed.

Supply and fix in repair mild steel framed work as in guard bars/grills, grating etc with end of bars shouldered and/ or riveted or forged in to spikes and similar works including one shop coat of zinc chromate primer complete conforming to Fe-290, Gde E-165 all as specified and directed.

Supply & fix 125 mm size mild steel butt hinges, ISI marked, medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed.

Supply & fix 100 mm size extruded aluminium alloy butt hinges with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.

S&F 150mm size aluminium anodised, barrel tower bolt of extruded section complete all as specified and directed.

S&F 100mm size aluminium anodised, barrel tower bolt of extruded section complete all as specified and directed.

S&F Floor door stopper of aluminum alloy body and tongue anodized with hard drawn steel spring fixed in floor of length 150mm complete all as specified and directed.

Supply & fix 300 mm long aluminum anodized sliding door bolt, plate type with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S&F Extruded aluminium alloy handles 150 mm long fabricated type anodised complete all as specified and directed.

Supply and fix in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Supply and fix stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Supply and fix 4mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane incl hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames glazed with putty or fixed with beads complete all as specified and directed.

Supply and fix 4mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

S&F in repair Harrison rails (Curtain rod//drapery rod), 20mm dia, powder coated with and including fency type PVC bracket 2 Nos of each opening and side stopper fency type powder coated of required shape and size 2 Nos of each opening complete all as specified and directed.

Supply & fix door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed.

Non skid ceramic tiles coloured pattern as required of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the existing, over with and including 15mm thick screed bed in CM (1:4) after dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

Non skid ceramic tiles coloured pattern as required of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the existing, over with and including 15mm thick screed bed in CM (1:4) after dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

All as per item No. 26 above but on skirting over with and including 10mm thick backing coat in CM 1:4 complete all as specified and directed.

Glazed ceramic tiles coloured, pattern as required (dark & light shade combination) 450 x 300 x 7-8 mm thick on vertical surfaces such as dado etc set and jointed in neat cement slurry and pointed in white or colour cement to match the existing, over with and including 10mm thick backing coat in CM 1:3 after dismantling floor hearth or wall and rubbish off the premises complete all as specified and directed

Glazed ceramic tiles coloured pattern as required 300 x 200 x 7-8 mm thick on vertical surfaces such as dado etc set and jointed in neat cement slurry and pointed in white or colour cement to match the existing, over with after including 10mm thick backing coat in CM 1:3 and dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

Vitrified ceramic tiles coloured pattern as required 10mm thick (Square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to matche the existing, over with and including 15mm thick screed bed in CM 1:4 and dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premisescompete all as specified and directed

ditto- all as per item No.30 above but on skirting over with and including 10mm thick backing coat in CM 1:4 complete all as specified and directed.

Material & labour for 18-20mm thick machine cut kota stone slab 550mmx550mm/600mmx600mm laid in floors, slabs and steps etc jointed with grey cement slurry mixed with pigments to match the shade of the slab including cutting, rubbuing and polishing over and including screed bed 15mm thick in cement mortar (1:6) and demolition of old stone slab complete all as specified and directed. Note - Kota stone for step shall be in single piece.

All as per item No.32 above but in riser of steps, skirting, dado and pillarwith and including 10mm thick backing coat in CM 1:4 -ditto-

Material & labour for granite (of any type) work, 18 to 20mm thick machine cut (table rubbed and polished) in steps jambs, pillars, window cills, cooking platforms, shelves in cupboard, handwash places and like including necessary cutting and grooving to walls and making good including 15mm thick in cement mortar (1:4) screed bed or bedding layer and pointing with cement mortar (1:2) with admixture of pigment to match with shade of granite 6) and demolition of old stone slab complete all as specified and directed.

Material & labour for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specially provided complete all as specified and directed.

Material & labour for 75mm thick PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate), as in plinth protection/hard standing finished even & smooth complete all as specified & directed.

Material & labour for PCC (1:1.5:3) (using 12.5 mm graded stone aggregate), laying under bottom of sunken floor finished even & smooth complete all as specified & directed.

Material & labour for PCC (1:7:12) type F-2 (using 40mm graded stone aggregate) as in filling of sunken floors, mass concrete etc complete all as specified and directed.

Material & labour treatnent for sunken portion with and including 10mm thick cement plaster in CM (1:3) mixed with liquid WPC @200ml per bag of cement over brushing neat cement slurry when concrete surfaces is green, over after dry of plaster surface two coats of industrial bitumen 85/25 laid @1.2kg/sqm incl cleaning of surface over 150 micron PVC film laid when bitumen is hot complete all as specified and directed. Note : Rate of WPC, bitumen and PVC films are included in the item

Material & labour for 25mm thick PCC (1:2:4) type B-0 (using 12.5 mm graded stone aggregate), as in sub base for floors complete all as specified & directed.

M&L brick work with sub class 'B' bricks straight or curved in plan exc 6 mtr mean radius built in CM (1:4) using old size bricks with and including demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick/stone work or concrete sufaces in CM 1:6 including finishing even and smooth without using extra cement including preparing of new plaster surfaces on walls and applying three coats of white wash complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick/stone work or concrete sufaces in CM 1:6 including finishing even and smooth without using extra cement incl taking down cement plaster or brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water including preparing of new plaster surfaces on walls and applying two coats of oil emultion distemper of surface upto true finish over a coat of water base primer complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick/stone work or concrete sufaces in CM 1:4 incl mixing of liquid WPC of approved make @200ml per bag and finishing even and smooth without using extra cement incl taking down cement plaster or brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water including preparing of new plaster surfaces on walls and applying two coats of cement base paint over a coat chalk whiting complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern in roof coverings complete all as specified and directed.

Supply & fix 0.63 mm thick galvanised corrugated mild steel sheeting with two corrugations side lap bent to curve/shape, fixed with coach screws and washers or with L/J type hooks in roofs, wall or gate/door covering etc. with grade of zinc coating 275 complete all as specified.

S&F 1.00 mm thick plain galvanised,mild steel sheeting, with grade of zinc coating 275 as in ridges, hips vally gutters drip and straight flashing (length and grith as fixed) complete all as specified and directed.

M&L preparing new steel surfaces of any description to receive painting, by coating with mordant solution including washing and cleaning, etc. iron surfaces as in roofings over 10 cms width or girth and applying two coats of synthetic enamel paint in approved colour & pattern over one coat of red oxide zinc chrome primer, complete all as specified and directed.

S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F for pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof covering /cladding to wall, fixed with self tapping screws as in ridge,eaves boards, hips, velly gutter drip and straight flushing of reuired machine moulded shape and size complete all as specified and directed.

Dismantling structural steel work including doors, gates etc but excluding framed trusses complete all as specified and directed.

S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.

Supply & fix in repairs bib taps, cast copper alloy, chromium plated with crutch or butterfly handles, screwed down for 15 mm bore GI pipe or for brass ferrule or to GI socket complete all as specified and directed.

Supply & fix in repair PVC (SWR) 75mm bore multi floor trap plain with grating including jointing with waste pipe with adhesive complete all as specified and directed.

Supply & fix in repairs 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including necessary cutting chasing etc. complete all as specified and directed.

Supply & fix in repairs 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including necessary cutting chasing etc. complete all as specified and directed.

Supply & fix in repairs PVC (SWR) 110mm junction single (Single 'T') equal or unequal complete all as specified and directed.

Supply & fix in repairs PVC (SWR) 75mm junction single (Single 'T') equal or unequal complete all as specified and directed.

Supply & fix PVC (SWR) 110mm bore bends any radius complete all as specified and directed.

Supply & fix PVC (SWR) 75mm bore bends any radius complete all as specified and directed.

Supply & fix in repairs PVC (SWR) 110mm bore vent cowl complete all as specified and directed.

Supply & fix in repairs PVC (SWR) 75mm bore vent cowl complete all as specified and directed.

S&F 15 mm dia steel water GI tube medium grade with all fittings and fixed with walls, ceilings or laid in floors incl taking up or down 15mm dia bore old steel tubing and connections complete all as specified and directed.

S&F 20 mm dia steel water GI tube medium grade with all fittings and fixed with walls, ceilings or laid in floors incl taking up or down 20mm dia bore old steel tubing and connections complete all as specified and directed.

S&F rotational moulded polythene water storage tank 500 ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I with and including dismantling water tank of capacity exceeding 250 liters but not excedding 500 Ltrs and 20mm ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule & nipple suitable for HDPE water tank (Min weight 15mm-38 gms/20mm-45gms/25mm-65gms) complete, all as specified and directed by Engr -in-Charge.

S&F rotational moulded polythene water storage tank 1000 ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I with and including dismantling water tank of capacity exceeding 500 liters but not excedding 1000 Ltrs and 20mm ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule & nipple suitable for HDPE water tank (Min weight 15mm-38 gms/20mm-45gms/25mm-65gms) complete, all as specified and directed by Engr -in-Charge.

Supply & fix in repairs 20mm dia gun metal gate valves with iron wheel screwed both ends for iron pipe complete all as specified and directed.

Supply & fix in repairs ball valve brass high pressure with polythene float and fly nut complete screwed for 20mm bore dia of iron pipe or brass ferrule complete all as specified

S&F in repair health faucet with hooks and one meter tube full brass, screwed for iron pipe and fixed complete all as specified and directed.

Supply & fix in repairs toilet paper holder vitreous china coloured, box type fixed to walls with chromium plated brass screws complete all as specified.

S&F 12mm thick Gypsum board fixed in false ceiling grid made with anodized GI powder coated frame work with 605mm x 605mm size snap gird fixed with screws / staples and hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete including dismantling ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets as directed by Engineer-in-Charge.

S&F in repair 18/19mm thick Block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work as in shelves, partition, wall and lineing complete all as specified and directed.

S&F in repair 6mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face; fixed with nails to timber frame work complete all as specified and directed.

S&F for 2nd class hard wood plain fillets, sectional area exceeding 6 sqcm but not exceeding 13 sqcm, square, rectangular or triangular in section, clean sawn, secured with nails all as specified and as directed.

M &L 2nd Class hard wood Scantling, clean swan, timber framed work and fixed incl dismantling timber scantling 40 sqcm and over in section and any position in framed work all as specified and as directed.

S&F in repair 0.9mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

Supply & fixing in repair 15mm thick boarding, fixed with nails in any situation (except flooring and skirting) Planed one side and edges tongued and grooved or rebated with and incl two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Supply & fix in repairs vitreous china wash down water closet pan (pedestal pattern) white including 10 ltr capacity flushing cistern, PVC connection 450mm long and 15mm dia ,PTMT nuts of length 450mm, plastic water closet sheet cover white, closed pattern with flat bottom, with mild steel chromium plated or aluminised hinging device and including mild steel chromium plated jet fixed to water closet with 360mm wide x 390mm high and 415 to 445mm long flexible pipe complete all as specified and directed.

Supply & fix in repairs squatting pan WC Orissa pattern size 630mm x 450mm white with integral foot rest including 10 ltr capacity flushing cistern with flush pipe , PVC connection 450mm long with P or S trap including provision of lime concrete bedding including breaking up existing damaged WC seat and connecting flush pipe etc making good to match with existing surfaces complete all as specified and directed.

Supply & fix in repairs stop valve fancy type chromium plated (concealed) type with long shank & cup 15mm bore, cast copper alloy, screwed down with high pressure with crutch or butterfllly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket complete all as specified and directed.

Supply & fix in repairs stop valve fancy type chromium plated (concealed) type with long shank & cup 20mm bore, cast copper alloy, screwed down with high pressure with crutch or butterfllly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket complete all as specified and directed.

Supply & fix in repairs wash hand basin vitreous china coloured, flat back, size 550 x 400 mm with a set of CI brackets, brass chromium plated waste fittings and PVC waste pipe 32 mm bore, including chinaware pedestal for waste pipe, connection to water tubing, PVC connection 15mm dia with brass check nuts incl CP 15mm brass centre hole mixture complete all as specified.

Supply & fix in repairs pillar taps cast copper alloy with capstan heads, chromium plated, fancy type 15mm bore screwed down high pressure with lettered Hot and Cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.

Supply & fix in repairs 15mm bore brass central hole, sink and wall CP mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed.

Supply & fix in repairs 15mm bore brass wall mixer CP for mixing hot & cold water screwed down for iron pipe complete all as specified and directed.

Supply & fix in repairs CP shower rose brass chromium plated square type of size 125mm with or without swivel joints including fixing to steel pipe or union of 15mm bore complete all as specified and directed.

Supply and fix in repair 600mm long towel rail of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 190 gms) complete all as specified and directed.

Supply & fix in repairs sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with CP bracket guard and railing 60 cm long complete all as specified and as directed.

Supply & fix in repairs PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action with top push type button with inlet ball valve and float including flush pipe, ball valve, handle, bracket PVC short bend etc. complete all as specified and directed.

Supply & fix in repairs PVC connection 15mm bore size with PTMT nuts of length 600mm complete all as specified and directed.

Supply & fix in repairs PVC connection 15mm bore size with PTMT nuts of length 450mm complete all as specified and directed.

M/S MIR SAJAD ENTERPRISES

M/S GHULAM HASSAN KUCHAY

M/S Sultan Enterprises

M/S BASHIR AND SONS