T-28/CCD/2025-26

Attending minor type of repair for full day by engaging and supplying one suitable and experienced carpenter for carrying simple type of repairing of all wood work with all T&P etc. but excluding cost of material

Attending minor type of repair for full day by engaging and supplying one suitable and experienced plumber with kits for attending defects of water supply pipeline, cistern and fixtures with water supply defects within colony with all T&P etc. but excluding cost of material.

Attending minor type work like cleaning of roof terrace works and sun shades and other non-measurable miscellaneous works by engaging labour for full day including all T&P etc. complete.

Excavation in foundation in ordinary soil (loam clay or sand) including lift up 1.5 M and lead upto 30 M and including filling, watering and ramming of excavated earth into the trenches or into the sides of foundation trenches as directed by the E/I for proper completion of work.

Levelling and dressing and making proper slopes including cutting and filling the earth upto 100mm depth if required and as per direction of E/I, complete with all material, labour and T&P etc. required for proper completion of work.

Cleaning of grass and removal without uprooting of rubbish upto a distance of 50 m outside permises area cleaned

Earth filling under floors and or corporation area including cost of earth obtained with in 8 KM distance outside the corporation’s area and carriage including , loading/unloading, spreading, watering and ramming in 20 cm. layers and dressing of earth etc. Rates including cost of earth, labour, T&P and ROYALTY of earth etc. required for proper completion of work.

Concrete with 4 cm gauge down graded stone ballast, coarse sand (F.M. 2.9 to 3.2) and cement in 12:6:1 proportion in foundation and under floors, including supply of all materials, labour, T&P etc. required for proper completion of work.

C.C. with 20 mm gauge down graded stone ballast, coarse sand (F.M. 2.9 to 3.2) and cement in proportion 4:2:1 including supply of all material, labour, T&P etc. required for proper completion of work.

RCC work with cement, approved coarse sand and 2 cm gauge graded approve hard stone ballast like granite, quarzite etc. from Dalla, Jhansi or other quarries in proportion 1:2:4 in lintels or bends and sun shade of door and windows excluding supply of reinforcement and its bending but including its cutting, fixing and binding the same with 24 BWG GI wire & including necessary centering & shuttering etc. required for proper completion of work, including supply of all materials, labour, T&P etc. reqd. for proper completion of work. (U.P.P.T.C.L. S.O.R.-2023, Item No. - 5.10)

1st class brick (not less than class 150) work in 1:6 cement & coarse sand of (2.90 to 3.2 FM) mortar in foundation and plinth including the supply of all material, labour and T&P etc for proper completion of work

1st class brick work but in 1:6 cement & coarse sand of (2.90 to 3.2 FM) mortar super structure in one brick(230mm) or more thick wall.

M.S. work in heavy size large sections such as trusses, built-up gates, doors & windows frames , roof work, grill or railing, grating T/F rail etc. wrought to required form including supply of steel bolts,nuts,wastage etc. and their fixing charges, drilling holes, welding etc. required for proper completion of work.

M.S.(T.M.T or TOR steel) work in plain work such as reinforced concrete or reinforced brick work (when not included in over all rates) wrought to required shape as necessary including cutting, bending etc. for proper completion of work and including supply of steel its wastage,bend, hooks and authorised overlapping as required for proper completion of work. (U.P.P.T.C.L. S.O.R.-2023, Item No. - 9.03)

Supplying and fixing of welded mesh size 75x25 and rectangular made out of 10 SWG over M.S. angle frame with M.S. flat with nut and bolts or welded as required including cost of drilling holes, bolts, nuts, washer welding etc. as required including cost of all labour, materials, T&P etc. required for proper completion of work excluding cost of angle iron and flat.(U.P.P.T.C.L. S.O.R.-2023, Item No. - 9.22)

Providing barbed iron wire fencing including fixing it to post after stretching it including cost of all labour, materials, T&P etc. required for proper completion of work excluding cost of posts. (U.P.P.T.C.L. S.O.R.-2023, Item No. - 9.07)

S/F galvanised mosquito proof jali (16x24 gauge) with M.S. flate of 20x3mm size , on both sides screwed of welded to window or door frame. (U.P.P.T.C.L. S.O.R.-2023, Item No. - 9.18)

12 mm thick plaster with cement mortar consisting of one part of cement & four part of coarse sand (1:4) minimum thickness not less than 10mm including cost of all material, labour, T&P etc. required for proper completion of the work .

12 mm thick plaster with cement mortar consisting of one part of cement & six part of coarse sand (1:6) minimum thickness not less than 10mm including cost of all material, labour, T&P etc. required for proper completion of the work .

40 mm thick 1:2:4 plain C.C. floor laid in panels finished with 3 mm floating coat of neat cement but for without base concrete .

S/F 8 mm thick glazed floor tiles of Somany, Johnson or equivalent make , laid with 1:3 cement and approved coarse sand mortar and joints finished with white cement slurry ,jointing and polishing complete including supply of all materials, labour and T&P required for proper completion of work.

S/F 6 mm thick glazed floor/rugged tiles in skirting / dado laid with 1:3 cement and approved coarse sand mortar and joints finished with white cement slurry ,jointing and polishing complete including supply of all materials, labour and T&P required for proper completion of work.

Providing and fixing 22 mm thick Colored Chequred Cement tile (size 250x250) mm in flooring or on footpath laid with 1:3 cement and coarse sand mortar finished with cement slurry jointing and finishing complete including supply of all material, labor and T&P etc. required for proper completion of work.

Providing and Laying 80mm thick interlocking C.C. paver block manufactured by high pressure and controlled vibration machine having plan dimension 200x(160+120mm) with min. 5mm thick toping of O.P.C. mixed with 25% marble powder . The compressive strength of concrete pavers block shall not be less than 30MPa &4.5 kg/No. grade over prepared subgrade with 50mm thick fine sand layer making joints filled properly and finished in proper level and alignment including cost of all material, labour and T&P required for proper completion of work as per Direction of E.I..(U.P.P.T.C.L. S.O.R.-2023, Item No. - 12.23)

Repair of plaster in patches upto one sqm. area including removal of old plaster, cleaning the same thoroughly and racking out joints to 1 cm depth watering the area and then replastering with 1:4 cement and coarse sand mortar and disposal of rubbish outside corporation area including supply of all material, labour, T&P etc. required for proper completion of the work. ( Item No.-27)+ (U.P.P.T.C.L. S.O.R.-2023, Item No. - 20.02)

Repair to 25 mm thick 1:2:4 plain C.C. floor in patches with cement approved coarse sand and 20 mm gauge down graded approved stone grit adding concrete hardener of approved make in specified portion or as directed by E/I and disposal of rubbish outside corporation area including supply of all labour, material, T&P etc. proper complete.)

Supply and Fixing new galvanized mosquito proof heavy quality iron wire mesh (16x24) gauge over door/window with country wood battens 8cmx1cm including S/F of necessary screws/nails and all material, labour T&P etc. required for proper completion of the work.

P/R of 15 mm dia G.I. Union of approved make and as per sample approved by E/I for repair of pipe lines including cost of all materials, labour and T&P etc. Required for proper completion of work.

P/F first quality white glazed Orissa pattern W.C. Pan Hindustan , Cera make size 580mm without P trap including cost of all material, labour and T&P etc. for proper completion of work.

P/F 100 mm dia white glazed "P" or "S" trap including cement concrete and all all material, labour and T&P etc. for proper completion of work.

Attending to petty maintenance services like plumbing services, mason services and carpenter sevices with one no. Welder/Plumber/ Mason/ Carpenter with one no. Helper per hour or part of an hour.

P/F of 15 mm dia. B-class (T.T./ Swastik make) ISI marked G.I. pipe complete with G.I. Specials such as bends tee, socket cross, clamps, etc. Earthwork including filling the trenches etc. required for proper completion of work. The rate also inculdes concealed G.I. fitting where required, cutting and making good the walls etc. including cost of all labour, materials, T&P etc complete. (Internal work).(U.P.P.T.C.L. S.O.R.-2023, Item No. - 26.01(a))

S/F 15 mm dia brass bib cock of approved quality (200 gms) with all labour, material & T&P complete.(U.P.P.T.C.L. S.O.R.-2023, Item No. - 26.13(b))

S/F PVC ball float valve 15 mm dia with brass rod and union complete ISI marked including supply of all material, labour and T&P etc. for proper completion of work (U.P.P.T.C.L. S.O.R.-2023, Item No. - 26.06(a))

Supply and fixing Syntex or equivalent make PVC water storage tank four layer of approved of desired capacity including all material, labour and T&P etc. required for proper completion of work.

P/F 75mm dia SWR, PVC (Finolex or equivalent) pipe including cost of excavation , C.C. etc including its jointing and connection all materials, labour and T&P etc. required for proper completion of work.

P/F 110 mm dia SWR, PVC (Finolex or equivalent) pipe including cost of excavation , C.C. etc including its jointing and connection all materials, labour and T&P etc. required for proper completion of work.

Providing and fixing 510mm x 400mm wash hand basin of white glazed earthen ware 1st quality ISI marked size (Hindware/Cera or equivalent make ) including supply of all required materials, labour and T&P etc. required for proper completion of work and including cutting and making good the walls and floor with cement, coarse sand and grit.

P/F of plain edge looking mirror 5 mm thick glass Indian polished of size 600x450 mm of Atul make or equivalent as approved by the E/I with superior quality frame and hard board sheet on back of mirror with PVC cleats and brass screws and washers for fixing purpose including supply of all material, labour T&P etc. complete.

P/F low level 10 litre PVC Flushing cistern (Hindware or equivalent make) with all fittings including cost of all material, labour and T&P etc. for proper completion of work.

P/F in position 32 mm dia PVC flush pipe for low level PVC flushing cistern.

P/F 32 mm dia PVC waste pipe of approved quality for wash basin or sink including supply of all material, labour and T&P etc. for proper completion of work.

Cleaning of Septic tank by removal of sludge incl. disposal of wastage material outside the colony premises, as directed by E/I by using bucket etc. & all T&P reqd. for proper completion of the work.

Supply and Fixing 50x50mm , 8 gauge G.I. chain link fencing 1.8m high including fixing to vertical posts, horizontal runners with 10mm dia 40mm long bolts , nuts, and washers complete with all materials, labour, and T&P etc. required for proper completion of work. Chain link of 8 gauge shall be galvanized by not dipped method as per relevant IS code. (Excluding cost of vertical Posts and Horizontal runners)

Cleaning of main drain or width more than 300 mm. including disposal of waste refuses sludge out side the board's area including washing and cleaning by clean water completely as per direction of the E/I including cost of all labour, T&P etc. required for proper completion of the work.

Same as above in item No. 20.14 but for drain of width less than 300 mm.