NIT11Item1

Dismantling of complete flash mixture system by dismantling of motor, gear box from the foundation after disconnection of all electric connection and dismantling the coupler and fan from shaft and taking out from the deep well with the help of chain pulley block, material handling equipments and safety equipments.

Overhauling repairing of gear box with replacement/repairing of worn out parts like worm shaft, worm gear, bearing, oil seal and gaskets etc as per job requirement.

Repairing of shaft on both side with welding, machining and hole for fixing of pin and making proper alignment.

Providing and Fixing of fan by making SS material with proper balance and bore suitable for above shaft for fixing at lower side of the shaft by machining work.

Fabricating /Supply of MS Coupler made out of EN-8 material as per sample. Including machining work. Making suitable bore as per shaft dia.

Fabricating /Supply of SS304 Pin duly threaded on both side with SS304 nut and washer.

Providing and fixing of MS channel inside the deep well for fixing of shaft with bracket by required tools & tackles the job i/c cutting and removing of old worn-out channel from inside the deep well by using of handling equipments and safety equipments.

Fabricating /Supply of CI/MS Bracket.

Supply of nut bolts as per site requirement.

Dewatering of deep well with the help of submersible pump of suitable capacity.

Fabricating of temporary working platform inside the deep well for doing the work.

Fabricating /Fixing of base frame of motor and gear box by using of MS channel with required tools & tackles the job i/c cutting and removing of old worn-out base frame.

Re-fixing of all dismantled items of flash mixture like gear box, motor, shaft, coupler, coupling, with bracket system and making proper alignment for smooth operation of the unit.

Fabrication and fixing of MS railing around the flash mixture by using of MS pipe of 40mm OD with two layer of horizontal position of pipe and Fabrication and fixing of MS plate with two nos. holes of 10mm dia fixing with fasteners for fixing of vertical pipe. Also includes the cost of fasteners as per job requirement.

Fabrication and fixing of tin shed for safety purpose of flash mixture by using of MS pipe of 25mm OD/ MS angle/ MS flat for making the structure and providing/fixing of fiber sheet for making the roof by tightly fixing with nut-bolts, washer and other hardware goods as per site requirement.

Repairing of panel by replacement of inner defective parts.

Testing & commissioning of flash mixture.

Painting and primer charges of complete unit with one coat of primer and minimum two coat of enamel paint of required shade & colour.

Jal Dhara Engineers India

MK ENGG.CO.