PROVIDING PVC TANK AND COVER REPAIRS TO STAIR CASE PLINTH PROTECTION FLOOR TILES WALL TILES IN TOILETS PLUMBING SANITARY FITTINGS AND ROOF REPAIRS TO INTERNAL WATER SUPPLY LINES CLEANING OF WATER TANK AND SHEETING FALSE CEILING WALL PANELLING

Amount

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning etc., and hoisting if required reconnecting and refixing in position for the following capacity complete all as specified and as directed.

Capacity exc 250 litres but not exc 500 litres.

Cleaning and removing all scale and dirt etc., from existing tanks and mouths of circulating pipes of any description and washing down in the manner for the following capacity complete all as specified and as directed.

Capacity exc 250 litres but not exc 500 litres.

Capacity exc 500 litres but not exc 1000 litres.

All as per item No.02 here-in-before but from RCC tank of capacity exc 1000 litres but not exc 2000 litres.

All as per item No.02 here-in-before but from RCC tank of capacity exc 10000 ltrs and not exc 20000 ltrs.

Supply and fix in repair closed top cover for water tank of any capacity and any type with locking arrangement complete all as specified and as directed.

Taking up or down steel tubing and connections of 15mm dia complete all as specified and as directed.

Taking up or down steel tubing and connections of 20mm dia complete all as specified and as directed.

Taking up or down steel tubing and connections of 25mm dia complete all as specified and as directed.

Supply and fix tubes, ‘medium grade’ galvanized, with all fittings and fixed complete to walls and ceilings or laid in floors of 15mm dia including cutting /chasing in walls etc., complete all as specified and as directed.

Supply and fix tubes medium grade galvanized with all fittings and fixed to walls or laid in floors of 20mm bore including cutting /chasing in walls etc., complete all as specified and as directed.

Supply and fix tubes medium grade galvanized with all fittings and fixed to walls or laid in floors of 25mm bore including cutting /chasing in walls etc., complete all as specified and as directed.

Supply and fix in repair 500 ltrs capacity rotational moulded polythene water storage tanks in three layer (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

Supply and fix in repair 1000 ltrs capacity rotational moulded polythene water storage tanks in three layer (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

Supply and fix in repair of rotational moulded polyethylene water storage tanks of capacity 275 ltrs (Rectangle shaped with closed top and fixed in loft portion of the kitchen) hoisted and fixed in position complete all as specified and as directed.

Supply and fix in repair PVC ball valve 15mm dia with epoxy coated aluminium rod and high density ball (minium weight 142 gms) complete all as specified and as directed.

Supply and fix in repair PVC ball valve 20mm dia with epoxy coated aluminium rod and high density ball (minium weight 210 gms) complete all as specified and as directed.

Supply and fix in repair PVC ball valve 25mm dia with epoxy coated aluminium rod and high density ball (minium weight 455 gms) complete all as specified and as directed.

Supply and fix in repair PVC ball valve 50mm dia with epoxy coated aluminium rod and high density ball (minium weight 1240 gms) complete all as specified and as directed.

Supply and fix in repair bib tap 15mm chromium plated long body with crutch butterfly handle, screw down screwed for iron pipe or for brass ferrule etc., complete all as specified and as directed.

Supply and fix in repairs angle cock 15mm chromium plate screw down screwed for iron pipe of brass ferrule etc., complete all as specified and as directed.

Supply and fix in repairs 15mm pillar tap cost copper alloy fancy type with capstan heads chromium plated screwed down high pressure with or without letered 'Hot or Cold' high pressure with long screwed shanks and fly nuts screwed for iron pipe etc., complete all as specified and as directed.

Supply and fix in repairs 15mm dia concealed type stop valve fancy type chromium plated etc., complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and paving not exc 15cm thick (below and above ground level) and removal and rubbish of premises exc 500m but not exc 1.5 km complete all as specified and as directed.

Material and labour for 40mm thick PCC 1:2:4, type B-1 (Using 20mm graded stone aggregate) as in flooring, including finishing surface even and smooth without using extra cement complete all as specified and as directed.

Material and labour for 3mm thick and 38mm wide glass dividing strips inserted in position complete all as specified and as directed.

Material and labour for 75mm thick PCC 1:3:6 type C-1 (Using 20mm graded stone aggregate) as in plinth protection, including finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for preparation of old wall surfaces and applying one coat of cement base paint complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for as in sunken floor and removal and rubbish of premises exc 500m but not exc 1.5 km complete all as specified and as directed.

Material and labour for 15mm thick rendering on concrete surfaces in CM 1:4 with WPC @ 3% by weight of cement as in sunken floor, including finished even and smooth without using extra cement complete all as specified and as directed. Note: Water proofing compound will be measured and paid separately.

Supply only integral water proofing compound complete all as specified and as directed.

Material and labour for PCC 1:5:10 type, E-2 (Using 40mm graded stone aggregate) as in sunken floor filling complete all as specified and as directed.

Dismantling of floor hearth or wall tiling including cement mortor bedding (but not backing) and rubbish off the premises complete all as specified and as directed.

Material and labour for coloured non skid ceramic joint free tiles 7 to 8mm thick (square /rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick screed bed/ bedding layer in CM 1:4 complete all as specified and as directed.

Material and labour for glazed ceramic coloured joint free tiles 400x350x6 to 7mm thick as in skirting/ dados set and jointed in neat cement slurry and pinted in white or coloured cement to match over 10mm back coat in CM 1:3 complete all as specified and as directed.

Material and labour for light shade vitrified ceramic coloured tiles 10mm thick (square/ rectangular) polished area of each tile not exc 0.36 sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:4 complete all as specified and as directed.

All as per item No.35 here-in-before but on vertical surfaces over 10mm thick screed plaster in CM 1:3.

Material and labour for machine cut kota stone slab flooring, steps 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over 20mm screed bed in CM 1:6 complete all as specified and as directed.

Material and labour for kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with pigment to match the shade of the slab including rubbing and polishing complete over 10mm thick back coat in CM 1:3 complete all as specified and as directed.

Dismantling wrought iron or mild steel work in any description not otherwise specifically provided for complete all as specified and as directed.

Supply and fix hand rails using with stainless steel pipe of grade 304, 50mm dia pipe for top rail, 20mm dia pipe for middle rail - 2 Nos, 40mm dia pipe for balusters at an interval of 40cm including cleats, brackets etc., complete all as specified and as directed.

Taking down rain water pipes (any size or pattern) including all fittings heads, shoes etc., including removal complete all as specified and as directed.

Supply and fix 75mm bore PVC (SWR) pipes single socket in any length with rubber ring jointed to fixed to wall complete all as specified and as directed.

All as per item No.42 here-in-before but 110mm bore.

Supply and fix 75mm PVC (SWR) bends any radius complete all as specified and as directed.

All as per item No.44 here-in-before but 110mm bore.

Supply and fix 75mm PVC (SWR) junction single (Single T) equal or unequal complete all as specified and as directed.

All as per item No.46 here-in-before but (Double T).

Supply and fix 110mm PVC (SWR) junction double (Double T) equal or unequal complete all as specified and as directed.

Supply and fix 75mm PVC (SWR) branch piece single (single Y) equal or unequal complete all as specified and as directed.

All as per item No.49 here-in-before but 110mm bore.

Supply and fix in repairs stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75mm dia PVC pipes complete all as specified and as directed.

Supply and fix in repairs stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 110mm dia PVC pipes complete all as specified and as directed.

Taking down cement plaster or concrete etc., including racking out joints hacking for key scrubbing down with water etc., complete all as specified and as directed.

Material and labour 15mm thick rendering into two layers consisting 10mm thick in CM 1:4 followed by 5mm thick in CM 1:4 with WPC on fair faces of brick work or concrete surface including finished even and fair complete all as specified and as directed. Note: WPC shall be measured and paid separately.

Material and labour for 10mm thick rendering on other than fair faces of brick work or concrete surface in CM 1:6 including finishing even and smooth without extra cement complete all as specified and as directed.

Material and labour for two coats cement of base paint over a coat of chalk whitening primer on new plastered walls including preparation of surfaces complete all as specified and as directed.

Material and labour for two coats of oil bound distemper over a coat of chalk whitening primer on new plastered walls including preparation of surfaces complete all as specified and as directed.

Supply and fix 75mm PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and as directed.

Dismantling wall /ceiling board any thickness including cover fillets complete all as specified and as directed.

Supply and fix in repairs anodised aluminium snap grid frame work of size 605x605mm, for false ceiling, including necessary fixing arrangement with ceiling complete all as specified and as directed.

Supply and fix for gypsum board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and as directed.

Material and labour for preparing new false ceiling of gypsum board surfaces and applying two coats of plastic emulsion paint over one coat of primer complete all as specified and as directed.

Dismantling of Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings all as specified and as directed..

Supply and fix prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 MPA as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Supply and fix prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 MPA as in roof covering/ridge/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc

Material and labour for old size brickwork with subclass 'B' bricks, straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and as directed.

M & L for brickwork with subclass 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed.

Material and labour for 20mm thick Granite (of any type) tiles machine cut in skirting/dado ,etc laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and grinding , polishing ,including 1:4 of cement mortar 15mm thick sreed bedding complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified.

Supply and fix in repairs wash hand basin vitreous china, white, flat back, size 550 x 400 mm excluding taps, waste, chain and plug and including brackets complete all as specified and as directed.

Supply and fix 32 mm dia waste coupling of PTMT (half or full threaded) minimum weight 32 mm 45 gms complete all as specified and as directed.

Supply and fix in repair coloured vitreous china wash down water closet pan (pedestal pattern) including Vitreous China valveless,syphonic action type, coloured flushing cistern, 10 litre capacity, low level with inlet, ball valve,float and handle including bracket, flush pipe of polyethylene of low or high density of PVC 32 mm dia,for low level cisterns and Plastic water closet seat,black,closed pattern with flat bottom,and cover and mild steel chromium plated or aluminised hinging device including jet spray complete all as specified and as directed.

Taking down chowkats or frames of any discription exc 1.5 sqm and n exc 4 sqm each with shutters (without taking off shutter from the frame) complete all as specifed and directed.

S & F Solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing

S&F in repairs factory made solid panel PVC moulded door shutter, 28 to 30 mm thick(styles), with 2, 4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing.

S & F 100 mm size stainless steel butt hinges of medium weight and fixed with screws complete all as specified and as directed.

S & F 150mm long aluminium anodised barrel tower bolts of extruded section and fixed with screws etc complete all as specified and as directed.

Supply and fix 10 litres capacity PVC valveless, syphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed.

Supply and fix tubular towel rail brass chromium plated, 20mm dia D type, 60 cm long between flanges complete all as specified and as directed.

Supply and fix PVC connections 15 mm size with PTMT nuts of length 450mm complete all as specified and as directed.

Supply and fix 20 mm ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms) complete all as specified and as directed.

Supply and fix in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortor to dwarf wall or cantilever brackets and connecting union to pipe overall size 915x460mm, bowl size 410x330x160mm complete all as specified and as directed.

Taking down chowkats or frames of any description with shutters (without taking off shutters from the frames) area n exc 1.5 Sqm each all as specified and as directed and making good the disturbed plastered surfaces with 10 mm plaster in CM 1:6 and final finish as per existing.

Supply and fix powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates (minimum thickness of powder coating 50 micron) including joining cleat for fixing etc. complete all as specified and as directed.

Supply and fix powder coated anodised sliding/hung type aluminium door, window and ventilator shutters (minimum thickness of powder coating 50 micron), without sash, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1 No), hinges type B-21 100 mm long (2Nos) suitable handle (1 No), aluminium tower bolt 100 mm (1No) etc. complete all as specified and as directed

Supply and fixing powder coated aluminium grill of 6mm thick with 'F'/'U' type channel for windows complete all as specified.

S&F in repair 100 mm size mortice lock with two lever (vertical type) brass body and fixed complete all as specified.

S&F rubber beading to aluminium window/doors of best quality for securing glass panes including removal of glass from the existing aluminium frame carefully and refixing in the same opening complete all as specified.

M&L Plain Fillets n.exc 3 sq.cm of 2nd class hardwood in Square, rectangular or triangular in section, clean sawn, secured with nails or brads complete all specified and as directed.

S&F solar control film 25 micron reflective type sticked to glass panes as per instruction of manufacturer including removal of existing complete all as specified. (Make :- Gareware or equivalent make)

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and as directed.

Supply and fix for Structural steel works as in tubular roof trusses, purlins, rafter, vertical posts, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, tubular pipe, channel or flat sections) including distance pieces, cleats, riveting including bending and welding, conforming to Fe–410W Gde E-250 quality A complete all as specified and as directed.

Supply and fix framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles as necessary, gusset plates, cleats, MS Flat, MS plate, rivetting etc n.exc 10 kg each brackets, conforming to FE 290 Gde E-165 complete all as specified and as directed.

Material and labour for two coats of synthetic enamel painting over a coat of red oxide priming including preperation of new steel surfaces over 10cm width or girth not otherwise described complete all as specified and as directed.

S & F Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered,put together with glue pinned at joints, supplied and fixed complete all as specified and as directed.

S&F 30 mm thick Flush shutters, solid core construction, with Particle board ecorative face veneer with lipping ,frame to match complete all as specified and as directed.

M& L , Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

Taking down copper/aluminium point wiring (light,fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of wall, floors, etc. all as specified and as directed.

Material and labour point wiring with 1.5 Sqmm single core PVC insulated FRLS unsheathed multi stranded copper conductor wire drawn into existing concealed conduit including provision of 1.5 Sqmm single core PVC insulated FRLS unsheathed multi stranded copper conductor as earth wire and cast iron / pressed steel treminal boxes for mounting switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet cover complete for the following point wiring :- Make of cable : Plaza/Polycab/Finolex

One light point controlled by one switch.

One fan point controlled by one switch.

One Exhaust fan point controlled by one switch.

One 3 pin socket outlet 5 Amps,same board with cables 1.5 Sqmm size.

One 3 pin socket outlet 5 Amps, independent board with cables 1.5 Sqmm size.

One bell/buzzer point controlled by one push button with other switches on indipendent board with cable 1.5 Sqmm size.

One light point controlled by two 2- way switches, with cable 1.5 Sqmm size.

All as per item ser no-101 here in before but one 3 pin socket outlet 5/15 Amps, indipendent board with cables 4.0 Sqmm size.Make :- Polycab/Finolex/Plaza

M&L for sub main wiring 2 runs of 4.0 sqmm and 1run of 4.0 sqmm as earth wire with PVC FRLS insulated unsheathed multi stranded along with earth wire FRLS PVC insulted copper conductor, single core cable in and including surface/concealed /PVC conduit of appropriate size all as specified. Note:- : 1. Cutting chases for concealed wiring shall be measured and paid seperately. 2. Rates are including taking down old unserviceable. Make for Copper cables: Finolex/Polycab / Plaza. Make of PVC Conduit: SUDHAKAR/FINOLEX/AVON PLAST

S&F in repair for switch piano, flush type single pole , one way 5 amp complete all as specified and as directed. Make: Anchor/Cona/Leader

S&F in repair for switch socket combination 2 in 1, 3 pin, 5 Amp flush type complete all as specified and as directed. Make: Anchor/Cona/Leader

S&F in repair for bell push flush type, 5 Amp complete all as specified and as directed. Make: Anchor/Cona/Leader

S&F in repair for switch piano, flush type single pole , two way 5 amp complete all as specified and as directed. Make: Anchor/Cona/Leader

S&F in repair for switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal complete all as specified and as directed. Make: Anchor/Cona/Leader

S&F in repair for ceiling rose three terminals/ PVC/ polycarbonate, isolated body complete all as specified and as directed. Make: Anchor/Cona/Leader

S&F in repair for Lamp holder angular/batten type, PVC/ polycarbonate type with back plate complete all as specified and as directed. Make: Anchor/Cona/Leader

S & F in repair stepped type electronic fan regulator flush type on the existingphenolic laminated sheet etc and including taking down old all as specified and as directed. Make: Anchor/Cona/Leader.

Supply and fix high efficiency wall mounted LED batten type not less than18W 4 ft LED light fitting and including taking down old unserviceable fittings all as specified and as directed. Make :Crompton Cat Part No :LDL-20-CDL / Surya Cat ref SLE BTN T8 20W/Philips/Surya/wipro./ LUKER

Supply and fix high efficiency wall mounted LED batten type not less than 9W 2 ft LED light fitting and including taking down old unserviceable fittings all as specified and as directed. Make :Crompton Cat Part No :LDL-10-CDL or Surya Cat ref SLE BTN T8 10W/Philips/wipro./ LUKER

S&F sheet metal enclosure vertical TPN MCCB DB 4 way double door with spreader terminals,insulating phase barrier and hardware with neccesary arrangements all as specified and directed Note :-(i) Including taking down old u/s DB, MCCB and MCB's (ii) MCCB and MCBs shall be measured and paid separetly under the respective item of shedule. Make:Siemens/Scheneider/Legrand/ABB/L&T.

S&F sheet metal enclosure vertical TPN MCCB DB 8 way double door with spreader terminals,insulating phase barrier and hardware with neccesary arrangements all as specified and directed Note :-(i) Including taking down old u/s DB, MCCB and MCB's (ii) MCCBs and MCBs shall be measured and paid separetly under the respective item of shedule. Make:Siemens/Scheneider/Legrand/ABB/L&T

S&F MCB,DB SPN 12 way double door DB with 200 amps rated copper bus bar in SS enclosure double door type. Note : MCB SPN/SP shall be measured and paid under the respective item of the schedule. Make:Siemens/Scheneider/Legrand/ABB/L&T

S&F MCB,DB SPN 08 way double door DB with 200 amps rated copper bus bar in SS enclosure double door type. Note : MCB SPN/SP shall be measured and paid under the respective item of the schedule. Make: Legrand/ Siemens/Scheneider/ABB/L&T

Supply and fix for MCCB 4 Pole, 415 V,adjustable Thermal & Fixed Magnetic setting type type 150/160 Amps with breaking capacity 25 KA complete all as specified and as directed.Make:.Siemens/Scheneider/ABB/L&T, Note : Including taking down old unserviceable.

Supply and fix for MCCB 4 Pole, 415 V, adjustable Thermal & Fixed Magnetic setting type type 125 Amps with breaking capacity 16 KA complete Including taking down old unserviceable all as specified and as directed.Make:Siemens/Scheneider/Legrand/ABB/L&T

Supply and fix for MCB SPN 230 V, 40-63 Amps with breaking capacity 10KA C curve Including taking down old unserviceable complete all as specified and as directed. Make:Siemens/Scheneider/Legrand/ABB/L&T

Supply and fix for MCB SP 230 V, 6-32 Amps with breaking capacity 10KA C curve complete Including taking down old unserviceable all as specified and as directed. Make:Siemens/Scheneider/Legrand/ABB/L&T

S& F for sheet metal enclosure single pole and neutral with a two pin and earth plug and socket complete with one SP MCB 20-32 Amps. Make:Siemens/Scheneider/Legrand/ABB/L&T

M&L for cutting chases on brick walls concrete surfaces not exc 10cm girth and making good in cement mortar (1:3) the existing surface after carryiing out the concealed wiring including necessary finishes all as directed.

Supply and fix wall mounted LED indoor wall light type not less than 7W and including taking down old unserviceable fittings all as specified and as directed. Make :Luker Cat Part No :LWL 110-1 or equivalent model of Philips/Surya/wipro/Crompton.

Supply and fix 230 V, 1200mm smart saver-50 of Orient or equivalent of Crompton/Bajaj

Supply and fix LED outdoor type Waterproof IP 65 rated LED fountain fitting not less than 20W for fountain/Swimming pool , necessary fixing arrangement such as Clamps, bolts and nuts etc, as per site requirement and including taking down old unserviceable fittings complete all as specified and as directed Make :Crompton / Philips/Surya/wipro.

Supply and fixing in repair of GI metal flush box suitable for mounting moduler plate of following modules:-

3 Module

6 Module

Supply and fixing in repair of combined both frame and cover plates fixing on mounting boxes for following modules:-

Cover plate with frame,3 Module

Cover plate with frame,6 Module

Supply and fixing of modular switch one way 5/6 A white Active one module all as specified and as directed.

Supply and fixing in repair of modular switch socket combination 16 A, 6 pin 3 module flush type Active white two module complete all as specified and as directed. .Make: Havells(Crabtree)/Legrand/Plaza.

Supply and fixing in repair of modular switch socket combination 5 Amp, 5 pin flush type Active white two module complete all as specified and as directed. Make: Havells(Crabtree)/Legrand/Plaza.

Supply and fixing in repair of socket 2M 6A-2/3 pin combined Active white all as specified and as directed .Make: Havells(Crabtree)/Legrand/Plaza.

Supply and fixing in repair of modular fan step regulator,120 W-2 module all as specified and as directed. Make: Havells(Crabtree)/Legrand/Plaza.

Supply and fixing modular bell push 6 A one modulecomplete all as specified and as directed.

Supply and fix for high efficiency modern 24 watts 1 x 1 sqft LED light with panel for recesssed dust free installation with high brightness LEDs for glare free homogenous illumination andsuitable for ceilling cut out 300 x 300mm complete all as directed. Note:- Including taking down the existing unserviceable FTL fittings.

Supply and fix adjustable wall mounted LED indoor Mirror light WW type not less than 8W with fixing arrangement and including taking down old unserviceable fittings all as specified and as directed by Engr-in-Charge. Make : Philips or equivalent model .

Supply and fix adjustable wall/ceiling mounted LED indoor Spot light WW type not less than 8W with fixing arrangement and including taking down old unserviceable fittings all as specified and as directed by Engr-in-Charge. Make : Philips or equivalent model .

Taking down ceiling fans of any make and sweep from ceiling hook/existing position complete including disconnecting and transporting to workshop for repairs all as specified and as directed.

Material and labour for rewinding of burnt out fan motor of Ceiling fan 1200/1400mm sweep with super enameled copper winding wire of existing gauge/size including necessary tapping, varnishing and dismantling,taking down burnt copper winding,reassembling and testing for smooth functioning all as specified and as directed.

Hanging only ceiling fans any make and sweep after repairs to ceiling hook by connecting with 3 core copper flexible round cable from ceiling rose to fan complete incl shifting from workshop all as specified and as directed.

HRML CONSTRUCTIONS

CRJ ENTERPRISES

SREE BALAJI ENTERPRISES

VKR ENTERPRISES

KRISHNA STRUCTURES

SUSII CONSTRUCTIONS

RD ENTERPRISES

C SRINIVASAN