PROVN OF TOILET NEAR NVG BLDG AND FALSE CEILING WITH CEILING LIGHT IN OLD SMC

Amount

Excavation over areas in soft/ loose soil n. exc. 1.50m deep and getting out complete all as specified and directed.

Excavation in trenches in soft/ loose soil n. exc. 1.50m wide and n. exc. 1.50m deep for foundation, or for shafts, wells, cesspits, manholes, etc., n. exc. 10 sqm on plan getting out complete all as specified and directed.

Excavation in post holes (or similar holes) in soft/ loose soil each hole n. exc. 0.5 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers n. exc. 25cm, watering and removing surplus soil to a distance n. exc. 50m and making good surfaces complete all as specified and directed.

Removing excavated soil exceeding 250m and not exceeding 500m and depositing where directed complete all as specified and directed.

Returning filling in including spreading, leveling, watering & well ramming in layers not exceeding 25cm thick in soft/ loose soil complete all as specified and directed.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.

M&L for hardcore of broken stone or boulders of gauge not exceeding 63mm,deposited, spred and levelled in layer not exceeding 15cm thick, watered and rammed to true surface complete all as specified and as directed.

Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Supply, lay / spread in trenches clean dry sand to required width and depth at bottom and top of cable including spreading, levelling, punning for laying/ cushioning of cable all as specified and as directed. Note : Punned thickness only will be considered or payment.

Supply and lay burnt Bricks, old size, sub class "B", laid flat adjacent to each other, perpendicular to cable with width equal to length in trenches for protection of cable all as specified and as directed

M&L for PCC 1:4:8, type D2, using 40mm graded stone aggregate as in foundation filling and mass concrete all as specified and as directed.

M&L for brick work with fly ash bricks, straight or curved on plan exceeding 6 metre mean radius with old size bricks built in CM 1:6 all as specified and as directed.

M&L for providing RCC (1:2:4) type B-1 using 20mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, including supports, overhangs, etc. also splays between floors and beams complete of flat rough finished surfaces of concrete all as specified.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with 19mm MS square tube of 19 gauge mitred cut at two corners and joined by inserting two No. 150mm long brackets of 15mm x 15mm MS square tube inside the 19mm x 19mm square tube fixed to wall by drilling and providing 100mm long MS screws with PVC fasteners complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, fix in frame complete all as specified and as directed.

S&F mild steel butt hinge, medium weight cold rolled 100mm size all as specified and directed.

S&F in extruded aluminium alloy handle cast type anodised 150mm size all as specified and directed.

S&F aluminium anodised barrel tower bolt of extruded section 150mm long all as specified and directed.

S&F mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F aluminium alloy anodised sliding door bolts 300mm long with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.

M&L for Mild steel framed work such as gates and grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290, Gde E-165 all as specified and as directed.

S&F rolled mild steel framed work as Joist, channel, angle, or tee sections,fixed independently, without connecting plates, etc. Fe- 290 E-165 complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

S&F Steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified and as directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for mild steel TMT bars 5mm dia and over up to and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-500D complete all as specified and as directed.

S&F rolled mild steel framed work as in as in main and cross beams, hip and jack rafters purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates Fe 410-w (Gde-E-250)quality Bcomplete all as specified and directed.

S&F Pre-painted galvalume aluminium zink coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength 550Mpa as in roof covering/ chajja, fixed with self tapping screws as per manufacturer’s instruction all as specified and directed.

S&F anodised aluminium snap grid size of grid 605mm X 605mm framework for false ceiling including GI suspenders/ hangers fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long etc. complete all as specified and directed. Note:- Cost of making frame work for light fitting, grill diffusers, cutouts etc is deemed to be incl in the quoted rate.

M&L providing 12mm thick gypsum board as in false ceiling fixed with screws as per manufacturer's instruction complete all as specified and directed.

M&L non skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exc. 0.06 Sqm but n. exc. 0.11 Sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

M & L for Glazed coloured ceramic tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match and including a backing coat in Cement Mortar 1:3, 10mm thick complete all as specified and as directed.

M&L for 100mm thick PCC 1:3:6, type C2, using 40mm graded stone aggregate as in sub base of flooring all as specified and as directed.

M&L 75mm thick PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in plinth protection finished even and fair complete all as specified and directed.

M&L rendering 15mm thick in cement mortar (1:4) mixed on fair faces of brick/ concrete surface and the surface finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 15mm thick in cement mortar (1:6) mixed on fair faces of brick/ concrete surface and the surface finished even and smooth without using extra cement complete all as specified and directed.

Supply and Fix sheet glass 3mm thick plain, ordinary quality and glazing with oil putty /wooden beads as directed in squares n.exc 0.50 sqm in each pane all as specified and directed.

Material and labour for applying three coats of white wash on walls including preparation of newly plastered surfaces all as specified and as directed.

M&L preparation of new steel surfaces of any description not otherwise described over 10cm girth or width and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L preparation of newly plastered surface of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

S&F vitreous china urinal half stall type white (excluding flushing cistern, flush pipe and waste pipe) including PVC waste pipe 1 m long complete all as specified and directed.

S&F vitreous china wash basin of size 600mm x 450mm including waste, chain & plug and porcelain stopper and bracket etc. Complete including cutting for and pinning in ends of brackets or erecting bracket and 32mm dia waste fitting brass chromium plated for sink etc;with long screwed shanks and fly nuts,flange end bedded in red lead cement including 32mm dia waste pipe fitted complete all as specified and directed.

Supply & Fix Vitreous China Squatting pan, 'Orissa' pattern, size 580 x 440 mm white with integral foot rests including provision of lime concrete bedding complete all as specified and as directed.

S & F Vitreous china wash water closet pan ( Pedestal pattern) white fixed in floor including trap, connecting to drain ( or outgoing pipe ) and flush pipe, anti syphonage pipe, flush pipe to pedestal pan including all joints etc. complete all as specified and as directed.

S&F Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device complete all as specified and as directed.

S&F 15mm dia Chromium plated fancy type Stop valves, cast copper alloy, screwed down,high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F 15mm dia Chromium plated fancy type angle stop valves, cast copper alloy, complete all as specified and as directed.

S&F Chromium plated fancy type hand shower fixed to Angle cock including all necssary fitting complete all as specified and as directed.

S&F 600mm x 450mm bevelled edged looking mirror 6mm thick with aluminium frame work fitted with 6mm thick commercial ply or AC sheet backing to mirror complete all as specified and directed.

S&F in PVC valveless, syphonic action type, flushing cistern 10 litres capacity, low level, white, with inlet, ball valve, float and handle including brackets including connection to water pipe and seat complete all as specified and as directed.

&F Galvanised steel water tubing medium grade 15mm bore conforming to IS specifications and ISI marked with all fittings such as bends, tees, unions, elbows, connecting pieces, plugs, sockets etc fixed on walls/ceiling or laid in floors etc., complete all as specified and as directed.

All as per Item No 52 here in before but 20mm bore

S&F 20mm dia cast copper alloy stop valves chromium plated screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and directed.

S&F 15mm dia bib taps cast copper alloy, chromium plated, long body with flange with crutch or butterfly handle screwed down, screwed for iron pipes or for brass ferrule complete all as specified and directed.

S&F PTMT shelf fixed with and including chromium plated brass screws and plastic cleats (minimum weight 300g) complete all as specified and directed.

S&F 15mm dia fancy type pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and directed.

S&F 500 ltr capacity three layered rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

S&F ball valve PTMT with epoxy coated aluminium rod for 20mm bore pipe, weight not less than 210gms, high pressure with polyethylene high density float and complete screwed for iron pipe complete all as specified and directed.

S&F UPVC (SWR) floor trap, plain with grating including joining with solvent cement 75mm dia of outlet complete all as specified and directed.

S&F 110mm dia UPVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or fixed to walls complete all as specified and directed.

S&F UPVC (SWR) bend any radius suitable for 110mm dia pipes complete all as specified and directed.

S&F UPVC (SWR) Tee any radius suitable for 110mm bore complete all as specified and directed.

S&F UPVC (SWR) P trap of 110mm bore complete all as specified and directed.

S&F 75mm dia UPVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or fixed to walls complete all as specified and directed.

S&F UPVC (SWR) bend any radius suitable for 75mm dia pipes complete all as specified and directed.

S&F Galvanised steel water tubing medium grade 40mm bore conforming to IS specifications and ISI marked with all fittings such as bends, tees, unions, elbows, connecting pieces, plugs, sockets etc fixed on walls/ceiling or laid in floors etc., complete all as specified and as directed.

S&F Gun metal globe or gate valve of size 20mm bore confirming to IS 778-1984 with iron wheel head, screwed both ends for GI pipe including all fittings/ fixtures like nipple, union etc., complete all as specified and as directed.

All as per Item No 68 here in before but 40mm bore

M&L for point wiring complete with 1.5sqmm (nominal area) PVC insulated unsheathed multistranded, (two run for Phase and Neutral) copper conductor FR & LS grade cable of 1100V grade conforming to IS -694 drawn through and including new non metallic rigid PVC conduit medium grade, ISI marked, 20mm bore with conduit accessories concealed in wall/ floor and fixed on ceiling/ roof etc. including new pressed steel terminal boxes 1.6mm thick, concealed in walls with plastic laminated sheet cover 3mm thick as top cover fixed with cadmium plated screws for housing the switch sockets, outlets, fan regulator etc including provn of 1.5sqmm PVC insulated unsheathed copper conductor cable of green colour for earth continuity and connecting to common earth dolly etc., complete all as specified and directed for:-

One light/ fan/ exhaust fan point controlled by one switch.

One 3 pin switch socket outlet, 5amps on independent board controlled by one switch.

M&L for point wiring complete with 2.5sqmm (nominal area) PVC insulated unsheathed multistranded, (two run for Phase and Neutral) copper conductor FR & LS grade cable of 1100V grade conforming to IS-694 drawn through and including new non metallic rigid PVC conduit medium grade, ISI marked, 20mm bore with conduit accessories concealed In wall/ floor and fixed on ceiling/ roof etc, including pressed steel terminal boxes 1.6mm thick, concealed in walls with plastic laminated sheet cover 3mm thick as top cover fixed with cadmium plated screws for housing the switch sockets, outlets, fan regulator etc including provn of 2.5sqmm PVC insulated unsheathed copper conductor cable of green colour for earth continuity and connecting to common earth dolly complete all as specified for 5 Pin 15 Amp switch socket combination on Independent board complete all as specified and directed.

Supply and fix switch piano, flush type, single pole, one way, 5 Amps, 230 volts all as specified and directed.

Supply and fix ceiling rose PVC/ Polycarbonate body 65 x 50mm 2 to 3 terminals 230 Volts, AC Single phase all as specified and directed.

Supply and fix switch socket combination 3 pin, 6 Amps, flush type, 230 volts all as specified and directed.

Supply and fix Switch socket combination 2 in 1, 3 pin, 6 and 16 Amp flush type universal all as specified and directed.

S& F wall mounting fan of 400mm sweep, single phase 230V AC oscillating type ,variable speed, connecting the fan to ceiling rose incl provn of flexible copper cable complete all as specified and directed. Make-: CG model-SS torm2 or its equivalent make in Almonard/Havells

Supply, fix, connecting and testing factory made, MCB distribution board (MCB DB), IP 42, TPN, 6 way, 240 Volts, single door, flush type made out of 1.2mm thick CRCA sheet metal, Phosphatised, duly powder coated and conforming to IS 8623 with 200 Amps rated bus bar, neutral link, earth bar and din rail etc., complete fixed in switch board/ wall complete all as specified and directed. Note: MCBs shall be measured and paid separately.

Supply, fix, connecting and testing MCB TPN, 100 Amps, 415 V of rupturing capacity 10kA, B curve type complete all as specified and directed.

Supply, fix, connecting and testing MCB single pole (MCB SP), 6 to 32Amps, 240 volts of rupturing capacity 10kA, C curve type complete all as specified and directed.

S & F 36Watt Recessed LED perforated Single Window modern Designed enabled by advanced LED light.It blandes into ceiling plane &maintain Uniform luminance across aperture to enhance visual comfort ceiling tile provided with a drop down acrylic diffuser suitable for 600X600 MM ceiling including extra frame for fixing at POP/ Gypsum Ceiling mounted version including LED light complete. The 36W system shall be operating at 220-240v AC supply having internal driver. IP20, surge protection 2KV, ambient temperature (-) 20 to 45 degree C, frequency 50 to 60 Hz. . PF should be greater than 0.95, THD < 10%. Individual LED's should not be visible for glare free output, and connection up to tube light fitting with connecting up with copper 3 core flexible cord of minimum 1.5 Sqmm size and testing complete, all as specified and as directed Make : CG LCTLSN-36-CDLCDL or its equivalent make in Havells , Wipro.

S & F GI earth lead wire of size 4.0 mm dia as earth continuity conductor as main earthing lead fixed to wall on batten or recessess as chases or burried in ground or drawn in pipe fixed to pole or any other indicated situation complete all as specified & directed

S & F Exhaust fan, steel body, AC single phase 230V of size 300 mm sweep with blades, frame and louvers complete all as specified & directed Make -CG/ ALMONARD/BAJAJ

Supply and fix LED tube light fitting capacity 20 watt fixed on wall/surface / ceiling with all accessories tube,driver,with surge protector complete rewired with multistranded copper cable & connecting to ceiling rose with 3 core ,multistranded flexible copper cable complete all as specified & directed. Make CGCta No-LDL-20-NW or its equivalent make in wipro/CG/ Havells/philips/ Bajaj.

Supply and fix lamp holder PVC/ polycarbonate type with back plate for batten fittings/ angle holder as required complete all as specified and directed.

Supply and fix LED light 9W lamp suitable for LED fittings, connectors block etc. complete all as specified & directed. Make- Syska Cat No- SSK-SRL-9W or its equivalent make in CG/Havells

Supply, fix, connecting and testing factory made, MCB distribution board (MCB DB), IP 38, SPN, 4 way, 240 Volts, single door, flush type made out of 1.2mm thick CRCA sheet metal, Phosphatised, duly powder coated and conforming to IS 13032 with 200 Amps rated bus bar, neutral link, earth bar and din rail etc. complete fixed in switch board/ wall complete all as specified and directed. Note: MCBs shall be measured and paid separately.

Supply, fix, connecting and testing MCB single pole (MCB SPN), 32Amps, 240 volts of rupturing capacity 10kA, C curve type complete all as specified and directed.

Supplying & laying GI Tubing 25 mm dia Light grade pipe with connecting acessories complete in trench for road and on surface/,wall for protection complete all as specified and directed.

Supply and lay in trenches/drawn through pipes or in road crossings / paths/ drains / ducts / floors / along poles / equipments etc., of LT cable under ground, XLPE insulated, screened, PVC bedded, galvanised strip or wire armoured, heavy duty electric cable with stranded aluminium conductor, 1100 volts grade of cross sectional area 6 Sqmm 2 core including connecting up using suitable size aluminium lugs testing and commissioning complete all as specified and as directed. Note : Excavation earth work, sand cushioning and brick protection shall be measured and paid separately.

M/s ABHIMAN HEGDE