SPL REPAIR TO BLDG NO P 435 OF AD STATIC WORKS INCLUDING PROVN OF HARD STANDING FOR PARKING OF VEHS AT GSFR AT GMS UNDER GE I GOS

Amount

Demolition of Cement Concrete (unreinforced) of any description & in any position not otherwise specifically provided for complete all as specified & directed.

M&L for cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in path/ hard standing surface finished even and fair complete all as specified and directed.

M&L for finishing cement concrete even and smooth using extra cement complete all as specified and directed.

M&L for forming contraction joints Grade A 65 mm deep x 10 mm wide, filled with sealing compound complete all as specified and directed.

Taking down rolling shutters including all hardware fittings complete all as specified & directed

S&F 1 mm thick of steel rolling shutters without ball bearing as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated, but gear operated type with bevel gear box and crank handle complete all as specified and directed.

S&F Ball bearing for rolling shutters complete all as specified and directed.

S&F Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed.

M&L Cutting holes in brick walls exc one brick but not exc two brick built in cement mortor or cement lime mortor and stone walls built in lime mortor for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed.

Taking down cover hood of existing rolling shutters (gear operated/ manually size any type ) carefully and completely over hauling the shutters by applying grease and oil in bearing, springs, guide cannels, operating rods, shaft gear boxes, gear wheel etc straightening thoroughly shutter blades, guide channels anchoring rods etc and fixing back the over hood in position and ensure smooth functioning of shutters complete all as specified & directed. (Note : worn out part for replacement will be measured and paid separately.)

Supply and fixing in repairs only following parts of steel rolling shutters complete all as specified and directed:- (a) MS gear box complete incl handle and anchoring rod as of approved quality

(b) Ball bearing suitable for rolling shutter

(c) Guide channel 3" (3.50 mm thick)

(d) Cover hood made of 1 mm thk plain GI Sheet pattern

(e) Bottom plate 5" (2.25mm)

(f) C Class pipe 50 mm dia in shaft

(g) Anchoring rod of 25 mm dia of MS pipe

(h) Safety lever locks MS with 4 levers

M&L for two coats synthetic enamelled paint to new steel surfaces after preparation over a coat of red oxide primer area over exc 10cm in width or girth etc complete all as specified and directed.

M&L Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F pre- painted galvalume aluminum zinc corrugated steel based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed.

S&F pre- painted galvalume aluminum zinc corrugated steel based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed.

M&L for Fe 410-W (Gde E-250 quality A) Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.

M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.

M&L for preparation of new steel surfaces of any description n exc 10cm in width or girth and priming with red oxide zinc chrome and applying two coat of synthetic enamel paint complete all as specified and directed.

M&L Fibre Glass Plain Sheets 5mm thick fixed in MS frames including oil putty if required complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

M&L FRP (Fibre reinforced Plastic) Eave Gutter 5 mm thick, half round or trapezoidal shape as per site condition with slight round edges fixed as per the direction of Engr-In-Charge complete all as specified and directed.

M&L Drop ends 1.25 mm thick (for Spigot or socket ends) or nozzles 150 mm dia complete all as specified and directed.

M&L PVC (SWR) Pipes 150 mm dia fixed to walls, ceilings or roofs, properly clamped @ 1200 mm (max distance between PVC Clamps) complete all as specified and directed.

S&F PVC (SWR) Bends 150 mm dia of any radius complete all as specified and directed.

M&L for Complete removal of existing treatment of wall by brooming down or steel wire brushing scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying three coat of white wash complete all as specified and directed.

M&L for Complete removal of existing treatment on ceilings by brooming down or steel wire brushing scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying three coat of white wash complete all as specified and directed.

M&L for Complete removal of existing wall finish of any type with wire brush, brooming, dusting & finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc and applying two coats of cement based paint over a coat of primer complete all as specified and directed.

M&L preparation of old decorated wooden painted surfaces of any description not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old decorated Steel painted surfaces of any description not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L 75 mm thick cement concrete 1:3:6 type C2 using 40 mm graded stone aggregate as in sub base,floor , plinth protection etc and finishing cement concrete even and fair complete all as specified & directed.

Dismantling of floor, hearth, walls, roof tiles including bedding (but not backing), and rubbish off permises complete all as specified and directed.

M&L for non skid ceramic coloured tiles of design as approved 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

M&L for glazed ceramic coloured tiles 350 x 250 x 7 mm / 450 x 350 x 7 mm thick on vertical surface such as dado / skirting / risers to steps etc jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles complete all as specified and directed. Note- (i) The size of tiles (except thickness) may be varied during execution without any price adjustment.

M&L for screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6 for laying of floor tiles complete all as specified and directed.

M&L for Rendering 10 mm thick in cement mortar 1 : 4 for fixing of wall tiles complete all as specified and directed.

Taking down chowkhat or frames n exc 1.50 Sqm each with shutters (without taking off shutters from the frame) and removing to store complete all as specified and directed

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet re-inforced with MS square tube in opening as per specification and shown on drawing SSR Part-II 2020 complete all as specified and directed.

S&F, factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain cover PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rails lock rail and bottom rail on either side & as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement , as per specification and shown on drawing in SSR Part-II 2020 complete all as specified and directed.

S&F 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed etc complete all as specified and directed.

S&F 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed.

S&F 100 mm dia extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for Brick work with fly ash bricks straight or curved on plan exceeding 6 m mean radius complete built in cement mortar 1:6 complete all as specified and directed.

M&L for Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in built in cement mortar 1:4 complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in lintels upto 1.5 m clear span, coping, benching, bed block, lintel band, plinth courses etc and similar work including weathering,slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.

Taking down cement plaster on brick or concrete surface including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for Rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed

Hacking out old broken glass (any thickness, size quality or description) form metal frame including punching or drilling out old glazing pins/ spring clips and providing and fixing new ones complete all as specified and directed.

S&F 5 mm thick sheet glass ordinary quality and gazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning if refixing required for 15 mm bore of pipe complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning if refixing required for 20 mm bore of pipe complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning if refixing required for 25 mm bore of pipe complete all as specified and directed.

S & F 15 mm bore 3 layer PP-R pipes SDR 7.4 & SDR 11 UV stablised and anti microbial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded PP-R fittings complete to walls, ceilings or in floors complete all as specified and directed.

S & F 20 mm bore 3 layer PP-R pipes SDR 7.4 & SDR 11 UV stablised and anti microbial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded PP-R fittings complete to walls, ceilings or in floors complete all as specified and directed.

S & F 25 mm bore 3 layer PP-R pipes SDR 7.4 & SDR 11 UV stablised and anti microbial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded PP-R fittings complete to walls, ceilings or in floors complete all as specified and directed.

Making connection of PPR distrubtion bracnch with PPR main of following outer dia of pipe 16 to 40mm size by providing and fixing tee including cutting and making fusion joint etc complete all as specified and directed.

S&F in repair PP-R globe or gate valves screwed both ends for PPR Pipes of 20 mm bore of pipe complete all as specified and directed.

S&F in repair PP-R globe or gate valves screwed both ends for PPR Pipes of 25 mm bore of pipe complete all as specified and directed.

M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in Bricks/ stone Masonary wall complete all as specified and directed.

S&F in repair Wash down water closet vitreous china white pedestal pattern with 'P' or 'S' trap including connecting to outgoing drain pipe & to flushing pipe excluding flushing cistern and flush pipe complete all as specified and directed.

S&F in repairs Plastic water closet seat cover, closed pattern with recessed bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repairs, PVC valveless syphonic action type low level flushing cistern, 10 ltrs capacity with inlet, ball valve, float and handle including bracket complete all as specified and directed

S&F in repairs Flush pipe 32 mm dia of polyethylene of low or high density or PVC, for low level cistern complete all as specified and directed.

S&F in repairs Urinal of size 530 mm x 340 mm x 360 mm complete all as specified and directed. Make - Jaquar URS-WHT-0707 or equivalent of higher cost.

S&F in repairs Vitreous China urinal partition white of size 310 x 700 mm complete all as specified and directed.

S&F Urinal spreader chromium plated for Urinals complete all as specified and directed.

S&F in repair PVC connection 15 mm bore, 450 mm long complete with both ends unions complete all as specified and directed.

S & F in repair Soap dish any type fixed to plug with chromoium plated brass screw complete all as specified and directed. Make-Jaquar CAN-1311 N or equivalent of higher cost.

S & F in repairs Hand shower (Health faucet) with 1 mtr long Easy flex tube in crome finish & wall hook complete all as specified and directed. Make Jaquar Cat ALD-CHR-565 or equivalent of higher cost.

S&F in repair Chromoium plated angular stop cock for 15 mm bore complete all as specified and directed. Make-Jaquar CON-053KN or equivalent of higher cost.

S&F in repair Chromoium plated Two-way angular stop cock for 15 mm bore complete all as specified and directed. Make-Jaquar CON-059KN or equivalent of higher cost.

S&F in repair pillar tap cast copper alloy with capstan head chromium plated crewed down high pressure with or without lettered hot or cold with long screwed shanks and ply nuts 15 mm bore complete all as specified and directed.

Demolition of RCC of any description and in any position not other wise specially provided for reinforcement cut as required to facilitate demolition complete all as specified and directed.

M&L for pre cast cement concrete 1:1.5:3, type A-1, using 20mm graded stone aggregate as in cover slabs (for manholes etc) and similar articles with plain faces, set in CM 1:4 complete all as specified and directed.

M&L for Mild Steel TMT bar 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F in repair 75mm PVC (SWR) Floor trap, plain with grating,jointing with solvent cement as per site requrement complete all as specified & directed.

S&F in repairs WHB counter-type of size 195 x 600 x 425 mm including couplings complete all as specified and directed. Make-Jaquar CNS-WHT-WB03 or equivalent of higher cost.

S&F in repair Chromium plated Bib cock with flanges Quarter turn 15 mm bore complete all as specified and directed. Make-Jaquar FUS-29037 or equivalent of higher cost.

S & F in repair Bottle trap chromium plated for WHB as per approved quality complete all as specified & directed.

S & F in repair sheet Glass Shelf assembly consisting of 5.5 mm glass sheet shelf 12 cm wide with cromium plated bracket guard and railing 60 cm long complete all as specified and directed..

S&F Chromium plated towel ring with bracket complete all as specified and directed. Make Jaquar Cat AQN -7721 or equivalent of higher cost.

S&F LDPE pipe 50mm of pressure rating 6Kgf/sqcm fixed complete to walls, ceilings or in floors etc complete all as specified and directed.

M&L in repairs Water proofing treatment on "Non approachable / non accessible and approachable roof" surface (Horizontal & Vertical surfaces) in following sequence through manufacturer / authorized applicator of the manufacturer including taking down of existing roof treatment, properly cleaning & drying the concrete surfaces complete all as specified and directed. (i) Applying a coat of oxidised bitumen based solvent primer @ 0.3 Kg / Sqm. (ii) Applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 kg/ Sqm incl cleaning surfaces. (iii) Laying unrolled over the bitumen coated surface, polymeric water proofing membrane Hyperplas standard wt not less than 3kg /Sqm with 100 mm over laps shall be sealed by flame as per manufacturers instruction. (iv) Applying two coats of bituminous aluminium paint including preparation complete.

M&L for PCC 1:2:4 type B0 (Using 12.50 mm graded stone aggregate) in roof padding/kerbs/sunken slab etc complete all as specified and directed,

M&L for 10 mm thick rendering on roof surfaces/ concrete surface in CM 1:4 with liquid water proofing compound @ 200 ml per 50 Kg of cement complete all as specified and directed. (Waterproofing compound should be measured and paid separately)

Surface excavation n. exc 30cm deep and averaging 15 cm deep and getting out in soft loose soil complete all as specified & directed.

M&L Hardcore of broken stone or boulder of guage n.exc 63 mm, deposited, spread and levelled in layers n. exc 15 cm thick, watered and rammed to a true surface complete all as specified & directed.

M&L for 100mm thick cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as foundation complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregates as in hard standing 100 mm thick laid in panels and finished even and smooth without using extra cement complete all as specified and directed.

S & F Glass dividing strips, 3mm thick and 38mm width inserted in position to confirm design.

M&L 50 mm thick Sand cushioning below interlocking paver tile.

M&L Machine pressed precast concrete interlocking paver block any shape and size fixing with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as seceified and directed.

M&L for preparation of newly plastered surfaces of wall applying two coat of white wash over a coat of primer complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN Dbs/TPN DBs/ Main switch including old unserviceable MCCBs/ MCBs isolators etc and making good to disturbed surfaces at site complete all as specified and directed.

Taking down care fully copper/ aluminium sub main wiring of any size from surface / concealed / esisrting conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed

M&L in repairs for point wiring with 1.5 Sqmm signle core PVC insulated unsheathed copper FRLSH multi stranded conductor cable in and including concealed PVC conduit of size 20/25 MM ISI marked inclusive of tees, bend, elbows etc upto and including sunk in anodized pressed steel box for housing switch socket etc with white laminted 3mm thick sheet cover ISI marked of suitable size complete including PVC insulated multi stranded copper conductor 1.5 Sqmm FRLSH cable as earth wire to common earth dolly for connection to ceiling rose to earth terminal incuding cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed by Engr-in-Charge for following:- (a) One light point controlled by one , one way switch 5 Amp

(b) One fan point/ exhaust fan point controflled by one, one way switch 5 Amps and regulator

(c) One 3 pin 5 Amps witch socket outlet point controlled by one switch on the same board

(d) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board

All as per item No 106 above but using 2.5 Sqmm single core copper conductor cable of multistranded flame retardent PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket combition point including necessary running of 2.5 Sqmm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly.

All as per item No 106 above but using 4.0 Sqmm single core copper conductor cable of multistranded flame retardent PVC insulated unsheathed 1100 volts grade for AC point including necessary running of 2.5 Sqmm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly.

S&F in repairs LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F in repairs LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

M&L in repairs Switch piano flush button single pole one way 6 Amps, complete all as specified and directed.

M&L in repairs Socket outlet 2 in 1, 3 pin 5 Amp flush type ISI marked, complete all as specified and directed.

M&L in repairs for Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal complete all as specified and directed.

M&L in repairs for Switch socket combination 2 in 1, 5 A flush type complete all as specified and directed

M&L in repairs for Triple pole and earth enclosuere with 3 pin and earth plug with socket complete with one triple pole MCB 32 Amps, 415 volts, 50 Hz of Cat Part No CSDBPSPN020 of Make C&S or equivalent of higher cost.

M&L in repairs for Sheet metal enclosure factory made double door for mounting MCBs with 200A rated bus bar capacity SPN 8 way AC 240 Volts with IP-43 protection, complete all as specified and directed.

M&L in repairs for Ceiling rose 3 terminals of PVC/ polycarbonate, as per relevant IS code, ISI marked isolated body complete all as specified and directed.

M&L in repairs for earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, burried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less'than 1.5 meters below normal ground level, connected to galvanised iron earth lead wire of 4 mm dia GI pipe mediam grade 15 mm dia upto 7.5 mtr including provn of conrete pit in PCC (1:2:4) type B-1 using 20 mm graded stone aggregates with 40 mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 kg/sqm) and frame of angle iron 25x25x3 mm with lugs 02 Nos and with 6.0 mm dia MS bar handle made to shape, GI light grade 20 mm bore pipe for earth plate, common sald and charcoal filing, test point made out of Bronze/ Gun metal with fixing arrangement, funnel, wire mess and excavation/ earthwork in hard/ dense soil, to a distance not exceeding 50 mtr all as per electrical plate No 3 of SSR 2010 Part I and connecting to earth test point complete all as specified or indicated incl testing on completion.

S&F in repairs exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and directed.

S & F in repairs stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd complete all as specified and directed.

M&L in repairs Submain wiring with two single core 2.5 Sqmm size stranded copper conductor PVC insulated unsheathed cable FRLSH in and incl PVC rigid non metalic conduit concealed/ surface type and one PVC cable of 1.5 Sqmm size solid copper conductor PVC insulated andunsheathed for continous earth wire with junction boxes covered with laminated sheet 3 mm thick and other accessories complete all as specified and directed.

M&L in repairs Submain wiring with two single core 6 Sqmm size stranded copper conductor PVC insulated unsheathed cable FRLSH in and incl PVC rigid non metalic conduit concealed/ surface type and one PVC cable of 4.0 Sqmm size solid copper conductor PVC insulated andunsheathed for continous earth wire with junction boxes covered with laminated sheet 3 mm thick and other accessories complete all as specified and directed.

M&L in repairs Submain wiring with four single core 10 Sqmm size stranded copper conductor PVC insulated unsheathedcable FRLSH in and incl PVC rigid non metalic conduit concealed/ surface type and one PVC cable of 6.0 Sqmm size solid copper conductor PVC insulated andunsheathed for continous earth wire with junction boxes covered with laminated sheet 3 mm thick and other accessories complete all as specified and directed.

S&F in repairs 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed.

S&F in repairs amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of capacity 40 to 63 Amp SPN 240 Volts and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

S&F in repairs 415V 25KA 'C' curve MCCB of 100 Amp FP and current carrying capacity in the DB complete with connection testing and commissioning. Make C&S or equivalent of higher cost.

S&F in repairs LED flood light 120W 220 Volts, 50 Hz suitable for highbay integral fitting complete all as specified and directed.

S&F in repairs sheet metal enclosure vertical DB double door (VTPN) factory made having provn of FP MCCB upto 100 Amp as a incomer, 415 Volts, three phase and neutral 4 way with 200 Amps rated bus bar capacity, complete all as specified and directed. Cat Part No CSDBMCCB100DD04IP43 of make C&S or equivalent in legrand / hager / seimens

S&F in repairs LED street light fitting 25 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. Make Havells, Cat No enduraPearlsl25Wled757sasYtoPCmP or equivalent

Taking down and replacement of existing unserviceable street light fitting bracket with new brackets made out of 32mm bore GI pipe, light grade, tubing bend to shape, 1.2 metre long, fixed to pole/wall, painting with two coats of aluminium paint over a coat of red oxide primer complete all as specified and directed.

M&L for repair of EOT crane of capacity 2 TON double girder of span 19.40 Mtrs with following repairs complete all as specified and directed. Make: M/S Mohmad & Co. MES No 655/7004-CN/RM-1/05 (a) Structural modificaiton of platform with handrailing pipes (b) Alingment of LT & CT wheels (c) Alignment of LT & CT Rail (d) Alingment of gear boxes (MH,LT&CT) alongwith its repairing (e) CT motor repairs (f) Replacement of pendant (g) Re-wiring of complete crane including replacement of damaged cables (h) Reparing/Modification of control Panel (j) Overhauling of complete crane including motor gear box, wire rope greasing, bearing etc, also damaged spare parts shall be replaced. (k) Replacement of gear oil (l) Cleaning of painting of whole crane. (m) Any other works not specifed but required on ground as per OEM specification shall be done by the quoted rate by the contractor

M&L for repair of EOT crane of capacity 2 TON double girder of span 19.40 Mtrs with following repairs complete all as specified and directed. Make: M/S Mohmad & Co. Manufacture MES NO . 655/7003-CN/RM-1/05 (a) Structural modificaiton of platform with handrailing pipes (b) Alingment of LT & CT wheels (c) Alignment of LT & CT Rail (d) Alingment of gear boxes (MH,LT&CT) alongwith its repairing (e) CT motor repairs (f) Replacement of pendant (g) Re-wiring of complete crane including replacement of damaged cables (h) Reparing/Modification of control Panel (j) Overhauling of complete crane including motor gear box, wire rope greasing, bearing etc, also damaged spare parts shall be replaced. (k) Replacement of gear oil (l) Cleaning of painting of whole crane. (m) Any other works not specifed but required on ground as per OEM specification shall be done by the quoted rate by the contractor

M/S. KISHAN ENGINEERING

M/S S.K GHOSE

M/S SIWALIK AND CO

M/s Bapujee Builders and Traders

M/S JAGANNATH SASMAL

M/s MAA BHAIRABI ENTERPRISES

c p engineering works