REPAIR MAINT OF INTERNAL ELECTRIFICATION INCLUDING PETTY REPAIRS OF INTERNAL ELECTRIFICATION AT SECTOR A UNDER GE 865 EWS

Amount

Taking down carefully copper/Aluminium point wiring (Light, Fan, Socket or power) complete fitting such as switches, ceiling, regulator, sockets etc removing materials to be store for keeping in safe custody for re-use at site and making good disturbed surfaces of walls, floors etc as directed.

M&L for point wiring with copper conductor cable, multistranded, single core 1.5 Sqmm size for one light point controlled by one switch with PVC insulated multistranded copper conductor cable of size 1.5 sq mm for earth continuity in and including PVC casing and capping of approved size and quality fixed on walls/ceiling/wooden panelling including fixing 3 mm thick bakelite sheet on wooden board of any size complete all as directed and specified. Make of cable: L&T/FINOLEX/GRANDPLAY/ANCHOR/ POLYCAB Make of casing caping PLAZA/FINOLEX/ SUPREME/PRESTO PLAST

All as per Item No 2.00 but for one bell/buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5sqmm size

All as per Item No 2.00 but for one 3 pin socket outlet, 5 Amps on the same board with other switches, with cables 1.5 Sqmm size

All as per Item No 2.00 but for one 3 pin socket outlet, 5 Amps Independent with cables 1.5 Sqmm size

All as per item No 2.00 above but for power point 3 pin switch socket 15 Amp with PVC copper conductor cable multistrand unsheathed 2.5 Sqmm on independent board incl one run 1.5 Sqmm multistrand PVC copper conductor cable for earth continuity in and including PVC casing and capping fixed on wall incl teak wooden board with 3mm thick of hylam top sheet complete all as specified and as directed.

All as per item No 2.00 above but for power point 3 pin switch socket 15 Amp with PVC copper conductor cable multistrand unsheathed 4 Sqmm on independent board incl one run 1.5 Sqmm multistrand PVC copper conductor cable for earth continuity in and including PVC casing and capping fixed on wall incl teak wooden board with 3mm thick of hylam top sheet complete all as specified and as directed.

S&F switch piano flush type one way single pole 5 Amp 240 volts. Make : Anchor/Legrand/Crabtree/Cona

S&F switch socket combination 2 in 1, 5 Amps flush type universal. Make : Anchor/Legrand/Crabtree/Cona

S&F for socket outlet 3Pin, 5A, flush type. Make : Anchor/Legrand/Crabtree/Cona

S&F for modular bell push 6A 1 module. Make : Anchor/Legrand/Crabtree/ABB

S&F for switch socket combination 3pin 16A flush type. Make : Anchor/Legrand/Crabtree/Cona

S&F for Modular switch one way single pole 6 Amp 1 module 240 volts. Make : Anchor/Legrand/Crabtree/ABB

S&F for Modular switch one way single pole 16 Amp 1 module 240 volts. Make : Anchor/Legrand/Crabtree/ABB

S&F for Modular socket 6/16 A -2/3 Pin combined 2 module 240 Volt, Make : Anchor/Legrand/Crabtree/ABB

S&F Modular socket 6 A -2/3 Pin combined 2 module 240 Volt, Make : Anchor/Legrand/Crabtree/ABB

S&F for modular white cover plate with frame 1 module. Make : Anchor Roma/Havells/L&T

S&F for modular white cover plate with frame 2 module. Make : Anchor Roma/Havells/L&T

S&F for modular white cover plate with frame 3 module. Make : Anchor Roma/Havells/L&T

S&F for modular white cover plate with frame 4 module. Make : Anchor Roma/Havells/L&T

S&F for modular white cover plate with frame 6 module. Make : Anchor Roma/Havells/L&T

S&F for modular white cover plate with frame 8 module. Make : Anchor Roma/Havells/L&T

M&L for Bells Ding dong AC 230Volts Single pole. Make : Anchor/Legrand/Crabtree/Cona

M&L for ceiling rose surface bakelite 65x50 mm two to three terminals.all as specified and directed by Engr-in-charge. Make : Anchor/Legrand/Crabtree/Cona

M&L for lamp holder PVC/Poly cor bonate type insulated body with back plate suitable for batten fittings as specified and directed. Make : Anchor/Legrand/Crabtree/Cona

M&L for PVC Gang box with switch socket combination 2 in 1, 3 pin 5 & 15 Amp flush type universal all as specified and directed.

M&L for PVC Gang box with switch socket combination 2 in 1, 3 pin 5 Amp flush type universal all as specified and directed.

M&L for soft plug top 6A with Indicator. Make : Anchor/Legrand/Crabtree/Cona

M&L for Soft Plug top 16A with Indicator. Make : Anchor/Legrand/Crabtree/Cona

Sub main wiring with two runs of 16 Sqmm (2x16 sqmm) 1100 volts grade single core FRLS PVC insulated unsheathed multistranded copper conductor confirming to IS-694 drawn through and including non-metalic PVC rigid conduit 25 mm dia ISI marked with all conduit accessories etc with one run of 10 Sqmm (1x10sqmm) single core FRLS PVC insulated unsheathed copper conductor cable as earth wire, including cutting chases in wall for PVC conduit, sinking of MS boxes and making good to match with existing surfaces including taking down of old sub main wirings complete all as specified and directed by Engineer-in-Charge. Note:- 2 runs of 16 Sqmm (2x16sqmm), one run of 10 Sqmm (1x10 sqmm) cable and one metre of conduit will be measured as one unit. Make of cable: L&T/FINOLEX/GRANDPLAY/ANCHOR/ POLYCAB Make of conduit: PLAZA/FINOLEX/ SUPREME/PRESTO PLAST

Sub main wiring with two runs of 10 Sqmm (2x10 sqmm) 1100 volts grade single core FRLS PVC insulated unsheathed multistranded copper conductor confirming to IS-694 drawn through and including non-metalic PVC rigid conduit 25 mm dia ISI marked with all conduit accessories etc with one run of 6 Sqmm (1x6sqmm) single core FRLS PVC insulated unsheathed copper conductor cable as earth wire, including cutting chases in wall for PVC conduit, sinking of MS boxes and making good to match with existing surfaces including taking down of old sub main wirings complete all as specified and directed by Engineer-in-Charge. Note:- 2 runs of 10 Sqmm (2x10sqmm), one run of 6 Sqmm (1x6 sqmm) cable and one metre of conduit will be measured as one unit. Make of cable: L&T/FINOLEX/GRANDPLAY/ANCHOR/ POLYCAB Make of conduit: PLAZA/FINOLEX/ SUPREME/PRESTO PLAST

Sub main wiring with two runs of 6 Sqmm (2x6 sqmm) 1100 volts grade single core FRLS PVC insulated unsheathed multistranded copper conductor confirming to IS-694 drawn through and including non-metalic PVC rigid conduit 25 mm dia ISI marked with all conduit accessories etc with one run of 4 Sqmm (1x4sqmm) single core FRLS PVC insulated unsheathed copper conductor cable as earth wire, including cutting chases in wall for PVC conduit, sinking of MS boxes and making good to match with existing surfaces including taking down of old sub main wirings complete all as specified and directed by Engineer-in-Charge. Note:- 2 runs of 6 Sqmm (2x6sqmm), one run of 4 Sqmm (1x4 sqmm) cable and one metre of conduit will be measured as one unit. Make of cable: L&T/FINOLEX/GRANDPLAY/ANCHOR/ POLYCAB Make of conduit: PLAZA/FINOLEX/ SUPREME/PRESTO PLAST

Sub main wiring with two runs of 2.5 Sqmm (2x2.5 sqmm) 1100 volts grade single core FRLS PVC insulated unsheathed multistranded copper conductor confirming to IS-694 drawn through and including non-metalic PVC casing caping ISI marked with all accessories etc with one run of 1.5 Sqmm (1x1.5sqmm) single core FRLS PVC insulated unsheathed copper conductor cable as earth wire and making good to match with existing surfaces including taking down of old sub main wirings complete all as specified and directed by Engineer-in-Charge. Note:- 2 runs of 2.5 Sqmm (2x2.5sqmm), one run of 1.5Sqmm (1x1.5 sqmm) cable and one metre of PVC casing caping will be measured as one unit. Make of cable: L&T/FINOLEX/GRANDPLAY/ANCHOR/ POLYCAB Make of casing caping PLAZA/FINOLEX/ SUPREME/PRESTO PLAST

Sub main wiring with four run of 6.00 Sqmm (4x6 sqmm) 1100 volts grade single core FRLS PVC insulated unsheathed multistranded copper conductor confirming to IS-694 drawn through and including non-metalic PVC casing caping ISI marked with all accessories etc with two run of 4.00 Sqmm (2x4sqmm) single core FRLS PVC insulated unsheathed copper conductor cable as earth wire and making good to match with existing surfaces including taking down of old sub main wirings complete all as specified and directed by Engineer-in-Charge. Note:- 4 runs of 6 Sqmm (4x6sqmm), two run of 4 Sqmm (2x4 sqmm) cable and one metre of PVC casing caping will be measured as one unit. Make of cable: L&T/FINOLEX/GRANDPLAY/ANCHOR/ POLYCAB Make of casing caping PLAZA/FINOLEX/ SUPREME/PRESTO PLAST

Sub main wiring with four runs of 10 Sqmm (4x10 sqmm) 1100 volts grade single core FRLS PVC insulated unsheathed multistranded copper conductor confirming to IS-694 drawn through and including non-metalic PVC rigid conduit 25 mm dia ISI marked with all conduit accessories etc with two run of 6 Sqmm (2x6sqmm) single core FRLS PVC insulated unsheathed copper conductor cable as earth wire, including cutting chases in wall for PVC conduit, sinking of MS boxes and making good to match with existing surfaces including taking down of old sub main wirings complete all as specified and directed by Engineer-in-Charge. Note:- 4 runs of 10 Sqmm (4x10sqmm), two run of 6 Sqmm (2x6 sqmm) cable and one metre of conduit will be measured as one unit. Make of cable: L&T/FINOLEX/GRANDPLAY/ANCHOR/ POLYCAB Make of conduit: PLAZA/FINOLEX/ SUPREME/PRESTO PLAST

Sub main wiring with four runs of 16 Sqmm (4x16 sqmm) 1100 volts grade single core FRLS PVC insulated unsheathed multistranded copper conductor confirming to IS-694 drawn through and including non-metalic PVC rigid conduit 25 mm dia ISI marked with all conduit accessories etc with two run of 10Sqmm (2x10sqmm) single core FRLS PVC insulated unsheathed copper conductor cable as earth wire, including cutting chases in wall for PVC conduit, sinking of MS boxes and making good to match with existing surfaces including taking down of old sub main wirings complete all a+s specified and directed by Engineer-in-Charge. Note:- 4 runs of 16 Sqmm (4x16sqmm), two run of 10Sqmm (2x10 sqmm) cable and one metre of conduit will be measured as one unit. Make of cable: L&T/FINOLEX/GRANDPLAY/ANCHOR/ POLYCAB Make of conduit: PLAZA/FINOLEX/ SUPREME/PRESTO PLAST

S&F in replacement decorative ultra slim round profile LED lighting fixture with extruded polycarbonate, environmental friendly energy efficient ready to use pack 18Watts LED 6000K with connection 3core copper wire ceiling rose to fitting with complete accessories. Make : Cat part No - LHEXBLP7IN1W018 of Havells or equivalent in Bajaj/Philips.

S&F in replacement Decorative ultra slim round profile LED lighting fixture with extruded polycarbonate, environmental friendly energy efficient ready to use pack 9Watts LED 6000K with connection 3core copper wire ceiling rose to fitting with complete accessories. Make : Cat part No - LHEXBLP7IN1W009 of Havells or equivalent in Bajaj/Philips.

S&F in replacement of Skylux LED 36watts recessed 2x2 luminaire to enhance the delight of occupants with comfortable experience through its design & glare free soft illumination and connection of 3 core copper wire with all accessories(Warm White) Make : Cat part No -BZRSQL 36 W GZi W (Natural White) of Bajaj or equivalent in Havells/Philips.

Supply and fixing MCB distribution board Double door, sheet metal box, SPN, Regal Gray, 4Way double door 240Volt 50Hz with complete accessories, concealed to wall and making flush with wall surfaces and making good to disturbed surfaces of walls to match with the exisiting surface etc incl taking down old DBs complete all as specified and as directed by Engineer-in-Charge. Make: Cat part No 5076 10 of Legrand (Ekinoxe) or equal approved in Schneider (Acti-9)/Siemens (Betagard-8GB32)

Supply and fixing MCB distribution board Double door, regal grey, sheet metal enclosure, SPN 240 volts 8 way with 200 amps rated bus bar concealed to wall and making flush with wall surfaces and making good to disturbed surfaces of walls to match with the exisiting surface etc incl taking down old DBs. Make: Cat part No 5076 11 of Legrand (Ekinoxe) or equal approved in Schneider (Acti-9)/Siemens (Betagard-8GB32)

Supply and fixing MCB distribution board Double door, regal grey, sheet metal enclosure, SPN 240 volts 12 way with 200 amps rated bus bar concealed to wall and making flush with wall surfaces and making good to disturbed surfaces of walls to match with the exisiting surface etc incl taking down old DBs. Make: Cat part No 5076 12 of Legrand (Ekinoxe) or equal approved in Schneider (Acti-9)/Siemens (Betagard-8GB32)

Supply and fixing MCB distribution board Double door, sheet metal box, TPN vertical load line DBs are fitted with bus bars, neutal links, blanking plates (Without MCCB suitable for FP G frame), 415 volts 4 ways, concealed to wall and making flush with wall surfaces and making good to disturbed surfaces of walls to match with the exisiting surface etc incluidng taking down old DBs complete all as specified and as directed by Engineer-in-Charge. Make: Cat part No 5077 25 of Legrand (Ekinoxe) or equal approved in Schneider (Acti-9)/Siemens (Betagard-8GB32)

Supply and fixing MCB distribution board Double door, sheet metal box, TPN vertical load line DBs are fitted with bus bars, neutal links, blanking plates (Without MCCB suitable for FP G frame), 415 volts 8 ways, concealed to wall and making flush with wall surfaces and making good to disturbed surfaces of walls to match with the exisiting surface etc incluidng taking down old DBs complete all as specified and as directed by Engineer-in-Charge. Make: Cat part No 5077 27 of Legrand (Ekinoxe) or equal approved in Schneider (Acti-9)/Siemens (Betagard-8GB32)

Supply and fixing MCB SP 6 to 32 Amps, 'C' series, 230 V A/C complete incl taking down old MCBs all as specified and as directed by Engineer-in-Charge. Make: Cat part No 4085 87 to 4085 95 of Legrand (DX³) or equal approved in Schneider (Acti -9)/ Siemens (Betagard-5SL4)

Supply and fixing MCB SP 40 Amps, 'C' series, 230 V A/C complete incl taking down old MCBs all as specified and as directed by Engineer-in-Charge. Make: Cat part No 4085 96 of Legrand (DX³) or equal approved in Schneider (Acti -9)/ Siemens (Betagard-5SL4)

Supply and fixing MCB SP 63 Amps, 'C' series, 230 V A/C complete incl taking down old MCBs all as specified and as directed by Engineer-in-Charge. Make: Cat part No 4085 98 of Legrand (DX³) or equal approved in Schneider (Acti -9)/ Siemens (Betagard-5SL4)

Supply and fixing MCB SPN 40 Amps, 'C' series, 230 V A/C complete incl taking down old MCBs all as specified and as directed by Engineer-in-Charge. Make: Cat part No 4086 18 of Legrand (DX³) or equal approved in Schneider (Acti -9)/ Siemens (Betagard-5SL4)

Supply and fixing MCB SPN 63 Amps, 'C' series, 230 V A/C complete incl taking down old MCBs all as specified and as directed by Engineer-in-Charge. Make: Cat part No 4086 20 of Legrand (DX³) or equal approved in Schneider (Acti -9)/ Siemens (Betagard-5SL4)

Supply and fixing MCB TPN 63 Amps, 'C' series, 415 V A/C complete incl taking down old MCBs all as specified and as directed by Engr-in-Charge. Make: Cat part No 4086 83 of Legrand (DX³) or equal approved in Schneider (Acti -9)/ Siemens (Betagard-5SL4)

S&F in replacement of new generation energy saving and environmental friendly long life LED street light made up of pressure die case aluminium housing with high efficient LED as lighting source and PC cover having TOP opening seperate diriver compartment with IP 66 protection and impact resiistance of IK 07 including connection of 3 core copper wire complete all as specified and directed by Engr-In-Charge. Make : Cat part No - ENDURAPEARLSL25WLED757SASYTOPCMP of Havells or equal approved in Bajaj/Philips.

Supply and fixing MCCB 4 pole 100 Amps, 16 kA, 415 Volt complete incl taking down of old MCCBs all as specified and as directed by Engineer-in-Charge. Make: Cat part No 4200 15 of Legrand (DPX³) or equal approved in Schneider (NSX)/Siemens (3VL2)/L&T (D-Shine)

Supply and fixing MCCB 4 pole 160 Amps, 16 KA, 415 Volt complete incl taking down of old MCCBs all as specified and as directed by Engineer-in-Charge. Make: Cat part No 4200 17 of Legrand (DPX³) or equal approved in Schneider (NSX)/Siemens (3VL2)/L&T (D-Shine)

S&F in replacement Nimus. DECORATIVE Surface mounting 7.5W dome shaped pendent in black finishes with connection accessories complete all as specified and directed by Engr-In-Charge. Make : Cat part No - LHFHDPE1TN1G020 of Havells or equivalent in Bajaj/Philips.

S&F in replacement Trim Plus LED Panel Round 12Watts LED 3000K (Warm White) Aesthetically designed recessed mounted Panel in a light weight plastic body Fittings including connection accessories with complete all as specified and directed by Engr-In-Charge. Make : Cat part No - LHEBFCP5IZ1W012 of Havells or equivalent in Bajaj/Philips.

S&F in replacement Trim Plus LED Panel Round 15Watts LED 3000K (WArm White)Aesthetically designed recessed mounted Panel in a light weight plastic body Fittings including connection accessories with complete all as specified and directed by Engr-In-Charge. Make : Cat part No - LHEBFCP5IZ1W015 of Havells or equivalent in Bajaj/Philips.

S&F in replacement Trim Plus LED Panel Square 12Watts LED 3000K (WArm White) Aesthetically designed recessed mounted Panel in a light weight plastic body Fittings including connection accessories with complete all as specified and directed by Engr-In-Charge. Make : Cat part No - LHEBGAP5IZ1W012 of Havells or equivalent in Bajaj/Philips.

S&F in replacement Trim Plus LED Panel Square 15Watts LED 3000K (Warm White) Aesthetically designed recessed mounted Panel in a light weight plastic body Fittings including connection accessories with complete all as specified and directed by Engr-In-Charge. Make : Cat part No - LHEBGAP5IZ1W015 of Havells or equivalent in Bajaj/Philips.

S&F in replacement of LED Bulb 0.5Watts Red or Green Colour. Make : Cat part No - LHLDAFUEUONX0X5 of Havells or equivalent in Bajaj/Philips.

S&F in replacement of Ellipse Neo Hexa Bulkhead Light fittings 13.5W LED 6000K with connection 3core copper wire ceiling rose to fitting with complete accessories. Make : Cat part No - LHEXCGP7UN5W006 of Havells or equivalent in Bajaj/Philips.

S&F in replacement of Busbar Chamber 100Amps 4WAy with fixing arrangement complete all as specified and directed by Engr-In-Charge

Material and labour for earthing complete with galvanised steel earth plate 600 x 600 x 6 mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below ground level connected to and including GI wire of size 4 mm dia by means of nuts, bolts, washers etc made of and connected to test point and earth dolly as all shown in electrical plate No.3 of SSR Part-I 2009 and specified or indicated including excavation and earth work in any type of soil PCC (1:3:6) type C1 in chamber, pre cast RCC slab 50mm thick in cement concrete (1:2:4) type B1, reinforced with welded steel wire fabric or XPM jali (weight not less than 4.0 kg/Sqm) with cast iron frame, funnel, with wire mesh, 20mm bore medium grade GI watering pipe, lugs, 15mm bore light grade GI protection pipe, test point etc incluidng taking down of old u/s earthing set complete all as specified and as directed. Note: (i) Item includes the cost of 7.5 m GI pipe for protection of earth lead. Any additional length shall be adjusted through deviation order. (ii) Item includes the cost of 7.5 m GI earth lead. Any additional in length shall be adjusted through deviation order ( For Main DBs ) (iii) Item includes the cost of Charcoal and commercial salt ( For Main DBs )

R B TRADERS

SUMEET TRADING CORPORATION

SHARMA AND SONS CONSTRUCTION CO

HILL AND CO.

AKHTAR HUSSAIN

M.S Sharma Enterprises

M/S BALI CONSTRUCTIONS

KONCHOK TSEWANG

Takshos Enterprises