Installation of pump motor and other materials to the existing borewell on the road behind Gangamma Temple on Gangana Midde Main Road Ward No. 07, Kilaginathota Main Road on Shanimahatma Temple Near Ward No. 21, Behind Prakruthi School On the Ward No. 20. And the gas-powered crematorium in the industrial area of Chikkaballapur City and in front of the old G.C.B. Office re-drilling and flushing of the existing at Ward No.18 in City Municipal Council, Chikkaballapura Limits

Installation of pump motor and other materials to the existing borewell on the road behind Gangamma Temple on Gangana Midde Main Road Ward No. 07, Kilaginathota Main Road on Shanimahatma Temple Near Ward No. 21, Behind Prakruthi School On the Ward No. 20. And the gas-powered crematorium in the industrial area of Chikkaballapur City and in front of the old G.C.B. Office re-drilling and flushing of the existing at Ward No.18 in City Municipal Council, Chikkaballapura Limits

Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications,as per ne...

Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including t...

Providing wrought mild steel (galvanized) 50mm dia GI collar confirming to IS 1239-II, 1991 with latest amendments if any

Supply and delivery at site wrought middle steel (galvanized) GI elbow confirming to IS 1239-II, 1991 with latest amendments if any for: 50 mm dia GI elbow

Supply and delivery at site wrought middle steel (galvanized) GI bend confirming to IS 1239-II, 1991 with latest amendments if any. For 50 mm dia GI BEND

Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, includin...

Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments for: 50 mm dia

Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog ...

Providing Supplying and fixing suitable for 1.1 KV class UG cable filled with necessary bitumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc. with necessary materia...

Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. 1x3x6 m...

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975

Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well cap...

Re-drilling of filled-up borewell, including yield test at final depth

Cleaning of borewells including yield testing of borewell either using slow or fast rigs for not more than 2 hours at the final depth with a minimum working of 2 hours continuously with air compressor...