Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.4 LAccepted-Finance | ₹38.4 L | L1 | Accepted-Finance as per boq |
| 2 | L2₹40.3 L+₹1.9 L (4.86%)Accepted-Finance 1 SHAKTI NAGAR JAMMU JAMMU KASHMIR 180001 | JAMMU | JAMMU AND KASHMIR | 180001 | ₹40.3 L+₹1.9 L (4.86%) | L2 | Accepted-Finance as per boq |
| 3 | Rejected-Technical | - | - | Rejected-Technical Disqualified as per comparative chart |
| 4 | Rejected-Technical | - | - | Rejected-Technical Disqualified as per comparative chart |
| 5 | Rejected-Technical | - | - | Rejected-Technical Disqualified as per comparative chart |
Tender Value
₹50.7 L
EMD Value
₹1.0 L
Closing Date
15 Nov 2022, 6:00 pmClosed
Executive Engineer
JKPHC JAMMU
Construction of School of Architectural at GCET Campus, Chak Bhalwal, Jammu by way of Supply, Installation, Testing and Commissioning of Fire fighting system with wet riser system and alarm system at GCET Jammu (C.No. 40)
2022_DGPJK_194678_1
Fresh 40 of PHC JAMMU DIV /2022-23 DT- 03-11-2022
Open Tender
Machineries/ Mechanical Engg Items
Item Rate
180 days
CHACK BHALWAL JAMMU
REFER PQ TERMS AND CONDITIONS
3 documents required · 3 mandatory
₹3,000
Executive Engineer JKPHC Jammu
₹1.0 L
Office of the Executive Engineer, JKPHC Jammu
10 Jan 2023
3 Nov 2022
16 Nov 2022
3 Nov 2022
15 Nov 2022
3 Nov 2022
3 Nov 2022 - 5 Nov 2022
7 Nov 2022
Amount
SITC of underground M.S Pipes (B class) including cutting, screwing, welding etc. and providing all fittings e.g flanges, bends, tees, elbows reducers, clamps, hinges etc. Underground pipes shall be wrapped & coated by providing twin coating of Bitumen wrapping with first coating bitumen coating Wrapping with bitumen Hessian cloth & finishing with Bitumen paint of following sizes:
a) 150 mm dia
b) 100 mm dia
c) 80 mm dia
Same as above but for over ground M.S Pipes (B class) including cutting holes & chases in bricks or RCC wall/slab & Making good the same. Painting with one coat of primer and two coats of synthetic enamel of approved shade of following sizes: ( mtr)
a) 150 mm dia
b) 100 mm dia
c) 80 mm dia
SITC of single headed oblique pattern hydrant Landing valve with 80mm dia flanged inlet and 63mm dia Instantaneous type female outlet complete.
Supply of non-percolated flexible hose RRL 63mm dia x 15 mtr long complete with instantaneous type 63mm dia male and female coupling and Riverted to hose pipe with riverts and GI wire.
Supply of 63mm dia short branch pipe with 20mm dia nozzle.
SITC of First aid hose reel wall mounting swinging type complete with drum & brackets, 25 mm dia ball valve & 20 mm dia 30 mtr long high pressure pad hose with shut off nozzle complete as req.
SITC of cast iron double flanged Butterfly valve complete of following sizes:
a) 150 mm dia
b) 100 mm dia
c) 80 mm dia
SITC of following accessories:
a) 25mm dia spring loaded air release valve.
b) Pressure Guage
c) 25 mm dia ball valve
d) Pressure switch
SITC of cast iron double flanged NRV complete of following sizes:
a) 150 mm dia
b) 100/ 80 mm mm dia
SITC of GM Fire Brigade connection with collecting head 63mm,4 way instantaneous type male couplings with flanged outlet complete with blank caps.
SITC of the AUTOMISATION CONTROL PANEL consist of a control cubicle of fabricated sheet steel suitable for floor mount and for 3 phase, 4 wire , 50 hz system incorporating suitable isolating main switches, bus bars, relays, contactors, indication lamps, fuses , instruments automatic isolator and auxillary switch including connectors complete as required for 1 main electric pump and 1 jockey pump as required for the system.
SITC of Engine driven pumpset with broze impeller capacity 1650 LPM with 55mtr head with Kirloskar Diesel Engine 60 HP 12V water cooled with 125 mm suction and 100 mm delivery ; with Base frame, coupling, battery fuel tank, AVM pads etc. complete as required. The pump shall be provided with mechanical seal complete as req.
S/l of 4 core 10 sqmm Aluminum cable from motor to starter.
Supplying & lying of 3.5 core 35 sqmm Aluminum cable frommotor to electrical panel for automation of the system.
SITC of horizontally centrifugal end suction pump complete for delivery 1650 ltr/ min against a total head of 55mtrs. With 40 HP three phase motor with speed of 2900 rpm with bronze impeller and coupling, base frame and AVM pads complete as required. The pump shall be provided with mechanical seal.
SITC of horizontally mounted centrifugal pump complete for delivery 180 ltr/ min against a total head of 55mtrs. With 12.5 HP three phase motor with speed of 2900 rpm with bronze impeller and coupling, base frame and AVM pads complete as required. The pump shall be provided with mechanical seal.
Earthwork excavation in trenches including backfilling and leveling the top after laying of MS pipe.( running mtr)
Supply & installation of weather proof hose cabinetsfabricated from 18 swg MS sheet/section with full front glass door and suitable to accommodate 2 nos 15 mtr long hoses and 1 no branch pipes as req.
SITC of Air vessel 250mm dia and 1.5 mtr high withdished top, made of 6mm thick MS pipe complete with 25 NB dia gun metal air release valve, 20mm dia stop valve,25Nb gun metal pressure release valve,49NB drain valve , pressure guage & all accessories as req and painted.
SITC of gunmetal suction coupling for Fire Brigade drawal of water from fire tank of 100 mm dia.
Providing & fixing ABC type fire extinguishers 6 Kg cap. Complete with discharge arrangement, high-pressure hose pipe complete as req.
Providing & fixing CO2 type fire extinguishers 4.5 Kg cap. Complete with wheel valve arrangement, high-pressure wire Braided hose pipe as req. conf. to IS 2878
P/f of Ceiling mounted 5 kg ABC type modular Fire extinguisher
P/f of 2 kg ABC type Fire extinguisher
Bucket Stand with 4 buckets
SITC of Smoke Detector
SITC of Manual call Box
SITC of Hooter
SITC of 20 zone Fire alarm panel with batteries.
S/l of 2x1.5 sqmm copper armoured FRLS cable
Bee Kay Protection Systems
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .