Loading
Loading…
Loading…
Tender Value
Refer Docs
Closing Date
22 Sept 2026, 1:00 pm
N C Sharma
Noida
Framework agreement for supply of Steel TMT in Q3 of FY 2026-27
2026_BHEL_64871_1
2026Q3STEELTMT
Open Tender
Miscellaneous Goods
Supply
60 days
AS PER NIT
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
Exempted
11 Sept 2026
11 Sept 2026
22 Sept 2026
11 Sept 2026
22 Sept 2026
11 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Customer-02-TMT 8 mm IS 1786 Fe500/500D | 122 | MT | - | - |
| 2 | Customer-04-TMT 8 mm IS 1786 Fe500/500D | 60 | MT | - | - |
| 3 | Customer-02-TMT 8 mm IS 1786 Fe500/500D; TMT shall be conforming to IS 1786 and IS 13920. Minimum Elongation shall be 14.5 % and Ratio of Ultimate Stress to 0.2 % proof stress should be in the range of 1.15 to 1.25; Steel shall be only of strength grades with minimum 0.2% proof stress of 500 MPa, in addition to other requirements of IS 1786. The actual 0.2% proof stress of steel bars based on tensile test must not exceed their characteristic 0.2% proof stress by more than 20% | 385 | MT | - | - |
| 4 | Customer-03-TMT 8 mm IS 1786 Fe500/500D; TMT shall be conforming to IS 1786 and IS 13920. Minimum Elongation shall be 14.5 % and Ratio of Ultimate Stress to 0.2 % proof stress should be in the range of 1.15 to 1.25; Steel shall be only of strength grades with minimum 0.2% proof stress of 500 MPa, in addition to other requirements of IS 1786. The actual 0.2% proof stress of steel bars based on tensile test must not exceed their characteristic 0.2% proof stress by more than 20% | 350 | MT | - | - |
| 5 | Customer-09-TMT 8 mm IS 1786 Fe500/500D (Corrosion resistant Grade suitable for Marine construction with micro alloying combination Cr+Cu>0.4%) | 590 | MT | - | - |
| 6 | Customer-10-TMT 8 mm IS 1786 Fe500/500D (Corrosion resistant Grade suitable for Marine construction with micro alloying combination Cr+Cu>0.4%) | 68 | MT | - | - |
| 7 | Customer-06-TMT 8 mm (length 10-12 mtr) IS 1786 Fe550D | 150 | MT | - | - |
| 8 | Customer-11-TMT 8 mm (length 10-12 mtr) IS 1786 Fe550D | 120 | MT | - | - |
| 9 | Customer-02-TMT 8 mm (length 10-12 m) IS 1786 Fe550D, TMT shall be conforming to IS 1786 and IS 13920. Minimum elongation shall be 14.5 % and ratio of ultimate stress to 0.2 % proof stress should be in the range of 1.15 to 1.25. Steel shall be only of strength grades with minimum 0.2 % proof stress of 550 MPa in addition to other requirements of IS 1786. The actual 0.2 % proof stress of steel bars based on tensile test must not exceed their characteristics 0.2 % proof stress by more than 20 % | 846 | MT | - | - |
| 10 | Customer-07-TMT 8 mm (length 10-12 m) IS 1786 Fe550D, TMT shall be conforming to IS 1786 and IS 13920. Minimum elongation shall be 14.5 % and ratio of ultimate stress to 0.2 % proof stress should be in the range of 1.15 to 1.25. Steel shall be only of strength grades with minimum 0.2 % proof stress of 550 MPa in addition to other requirements of IS 1786. The actual 0.2 % proof stress of steel bars based on tensile test must not exceed their characteristics 0.2 % proof stress by more than 20 % | 1,100 | MT | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.40 MB
BOQ_70356.xls
BOQ • 0.48 MB
NITQ3TMTMerged.pdf
Tender Documents • 2.39 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .