ADDITION/ ALTERNA TION TO CERTAIN BLDGS AT WHITE KNIGHT AND PROVISION OF CHEQURED TILES PATHWAY AT EDN BR AT NAGROTA UNDER AOR OF GE (P) NAGROTA

Amount

BR PORTION Demolition of cement or lime concrete in any despription along with tarfelt treatment in roof and cement mortar bedding from roof removal of debrish out side MD land complete all as specified and directed by Engr in Charge.

Dismantling of asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings including wind tie complete all as specified and directed by Engr in Charge.

Demolition of brick work or stone buolder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articlescomplete all as specified and directed by Engr in Charge.

M&L for brick work with old size brick with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and directed by Engr in Charge.

Description all as SI No 4 above but except bricks

Demoliton of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engr in Charge.

M&L for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

M&L for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof ridge/covering/cladding to wall, fixed with self tapping screws as specified.

Dismantling wall & ceiling boards(fibre pulp insulation etc) or insulation boards/ slabs/blankets, any thickness including cover fillets complete all as specified and directed by Engr in Charge.

S&F 8 mm thick Seamless calcium silicate ceiling made out of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25mm long self drilling and tapping screws having philips head with under head cutter at 200mm center to centre including finishing thr joints of face board with specially formullated jointing compound and 48 mm wide fibre tape to provide seamless finish with 8 mm thick for seamless false ceiling fixed with screw over and including Gl frame work comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete as per manufacturer instruction including two coat of oil emulsion complete all as specified and directed by Engr in Charge.

M&L for Wind tie, drilled and countersunk for roof including securing bolts Fe-290 Gde 165 complete all as specified and directed by Engr in Charge.

M&L for machine cut kota stone slab flooring 20-22mm thick (size of stone not less than 55cmx55cm) laid and jointed with gre cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing to yield mirror finish with machine over screed bed or bedding layer of mortar 15mm thick in CM 1:4 for laying floor finishes including roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and applying/ brushing a coat of neat cement slurry with @3.0kg / Sqm on surface all as specified and directed by Engr-in-Charge.

M&L for machine cut kota stone 20-22 mm thick in riser of steps, skirting, dado and pillar laid over cement screed 10mm thick in CM (1:4) on fair faces of brick work or concrete surfaces and jointed with dado neat cement slurry mixed with pigment to match the shade of the slab including rubbing mirror finish and polishing complete all as specified and directed by Engr-in-Charge.

M&L for preparing old steel surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed by Engr in Charge.

M&L for PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate as in roof kerbs, paddng, mud stops etc complete all as specified and directed by Engr in Charge.

M&L for rendering 10mm thick in CM 1:4 on roof suraces with liquid water proofing compound @ 200 ml per bag finished even and smooth without using extra cement complete all as specified and directed by Engr in Charge.

M&L for water proofing treatment to roof etc. in following sequence:- (i) Properly cleaning and drying the surface (ii) Applying a coat of bitumen primer @ 1.2Kg/Sqm and primer shall be allowed to dry over night. (iii) Laying APP based modified water proofing membrane of weight not less than 3kg per sqm and thickness not less than 3 mm, with 100mm overlaps, sealed and bonded to the surface by 'torchon' method (iv) Applying two coat of bituminous based aluminum painting @ 0.15 kg/Sqm each coat on water proofing treatment with preparation of surfaces complete all as specified and directed at site.

S&F MS framed work as in staging for water storeage tanks with grills, doors, gates of angle iron, door frame or other section with gusset plate, rails, braces and stair case etc complete, drilled for fixing of steel sheeting or other covering etc, to prepared for hanging or sliding with including either hooks and hinges also fastening grills, grating, hold fast of doors and windows chowkat etc, with ends of bars shouldered and or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanksand fixing and similar work confirming to fe 290 Gde E-165 complete all as specified and directed by Engr in Charge.

M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed by Engr in Charge.

Dismantling of water tanks exc 500 but no exc 1000 ltr capacity complete all as specified and directed by Engr in Charge.

Disconnecting existing tanks of capacity exc 250 and n exc 500 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. And hoisting if required reconnectioing and re-fixing in position complete all as specified and directed by Engr in Charge.

S&F rotational moulded 1000 lit capacity polythelene water storage tanks ( cylindrical verticle with closed top) three layer white in colour hoisted and fixed in position all as specified.

S&F 20 mm dia Ball valve PTMT valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule.

Taking up or down 15 mm dia old serviceable / unserviceable steel tubing any grade and connections cleaning for re-fixing or removal to store complete all as specified and directed .

Taking up or down 20 mm dia old serviceable / unserviceable steel tubing any grade and connections cleaning for re-fixing or removal to store complete all as specified and directed .

S&F 15 mm dia steel tubing medium grade ,galvanized with all fitting such as bend ,elbow, socket,tees,and fixed complete to wall or in ceiling or in floors including cutting threading and making forged bends on pipes MS hooks etc ,for 15mm bore pipes complete all as specified and directed by Engr in Charge.

Description all as SI No 26 above but except material complete all as specified and directed by Engr in Charge.

S&F 20 mm dia steel tubing medium grade ,galvanized with all fitting such as bend ,elbow, socket,tees,and fixed complete to wall or in ceiling or in floors including cutting threading and making forged bends on pipes MS hooks etc ,for 15mm bore pipes complete all as specified and directed by Engr in Charge.

Description all as SI No 28 above but except material complete all as specified and directed by Engr in Charge.

Taking down chowkat or frames with shutter (without taking off shutter from the frame)area exc 1.5 Sqm but n.exc 4.0 Sqm each complete with hold fasts etc.

Taking down chowkat or frames with shutter (without taking off shutter from the frame) area n exc 1.5 Sqm each complete with hold fasts etc.

S&F powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed by Engr in Charge.

S&F powder coated aluminium frame work (min thickness of powder coating 50 micron) for doors, windows, ventiltors and partition, (sliding/openable/fix doors, windows, ventilator), etc with one, two or more rebates (reqd as per site), including joining cleat for fixing with dash fasteners of required dia and size, incl filling up gaps at junctions, ie top, bottoms and sides etc complete all as sspecified and directed..

S&F powder coated aluminium window, ventilator shutters and partition wall, etc sliding/openable/fixed (as per required at site) type without sash bar, alu section weighing 0.55 kg/m, including necessary locking arrangement, guide wheels, joining cleats, glazing clips rubber packing anodised alu snap beading screws etc complete all specified and directed.

S&F for sheet glass palin/coloured (as per directed by Engr-in-charge) 5.5 mm thick best quality and glazing with rubber packing, screws or glass putty in squares exc 0.5 Sqm each pane complete all specified.

S&F for stainless steel wire cloth of 0.36mm dia wire and average width of aperture 1.40mm & fixed with tacks or screws, wire staples, etc complete all as specified and directed by Engr in Charge.

Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge

S&F for 20 to 25 mm dia stainless steel drapery/Harison rail / curtain rod with brass /nickel chrom polish / designer lattos and brackets complete all as specified and approved by Engr-in-Charge including taking out old pelmet with curtain rods all as directed.directed .

S&F Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube with wooden grain printed PVC sheet used inserted of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and directed by Engr in Charge.

S&F Factory Made Solid PVC Moulded Door Shutter with Particle Board Core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed by Engr in Charge.

Taking down cement plaster on brick or concrete surfaces, parapets including raking out joint, hacking for key, scrubbing down with water, at any description with necessary scaffolding of max height for G+2 Bldgs etc complete all as specified and directed by Engr in Charge.

M&L for rendering 10 mm thick in CM ( 1:6 ) on wall/ concrete surfaces finish even and smooth without using extra cement complete all as specified and directed by Engr in Charge.

M&L for rendering 15mm thick in two layer (10mm+5mm) in cement mortar 1:4 on fair faces of brick work / concrete surfaces finished even and fair with out extra cement with WPC complete all as specified and as directed by the Engineer-in-Charge Note:- (i) water proofing compound on only top layer of plaster (ie 5mm thick) (ii) Qty of WPC 200ml per cement Bag as per manufacturer instructions (iii) WPC shall be measured and paid separately)

M&L for rendering 5mm thick in ceiling cement mortar 1:3 on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed by Engr in Charge.

Supply only Liquid water proofing compound complete all as specified and directed by Engr in Charge.

M&L for preparation of new plastered surface of wall and applying two coats of oil emulsion distemper over a coat of primer over 1mm thick wall care putty and rubbing the same to get smoothen surface complete all as specified and directed by Engr in Charge.

M&L for two coats of Anti fungal weather coat on new plastered surface with acrylic smooth exterior emulsion paint applied 1.67kg/10sqm of required shade over a coat of primer applied 2.20kg/10Sqm on new/ old surfaces including 2-3mm thick wall care putty ,and rubbing the same to get smoothen surface including necessary scaffolding for max height of G+2 bldg, etc complete all as specified and directed by Engr in Charge.

M&L for complete removal of old plastered surfaces and applying two coats of Anti fungal weather coat with acrylic smooth exterior emulsion paint applied 1.67kg/10sqm of required shade over a coat of primer applied 2.20kg/10Sqm on new/ old surfaces including 2-3mm thick wall care putty and rubbing the same to get smoothen surface, including necessary scaffolding for max height of G+2 bldg, etc complete all as specified and directed by Engr in Charge.

M&L for preparing new plastered surfaces of ceiling and applying three coat of whitewash complete all as specified and directed by Engr in Charge.

M&L for preparation of old decorated plastered or unplastered surface including complete removal by machinary only, scraping down smoke soot, moulded, moss, efflorscent salt, trading oil and greasy spots and applying two coat of Oil emulsion distemper on walls over 1 mm thick wall care putty and rubbing the same to get smoothen surfaceas specified and directed by Engr-in-Charge.

M&L for preparation of old plastered surfaces of ceiling and applying two coat of whitewash complete all as specified and directed by Engr in Charge.

S&F 5 mm thick Printed PVC sheet used instead of plain colour PVC shectplain colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site complete all as specified and directed by Engr in Charge.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed by Engr in Charge.

M&L for non skid joint free coloured ceramic floor tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n exc 0.18 sqm,in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface with 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed by Engr in Charge.

M&L for glazed ceramic coloured tiles of size 300x450x7 mm thick as on vertical surfaces such as wall, dado ,skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match over 10 mm thick backing coat on fair faces of brick work in CM (1:4) complete all as specified and directed by Engr in Charge.

M&L for vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry with 15mm thick screed bed or bedding layer in CM (1:6) complete and pointed in white or coloured cement to match existing surface complete all as specified and directed by Engr in Charge.

Description all as SI No 56 but as in skirting including 10 mm rendering in CM 1:4 complete all as specified and directed by Engr in Charge.

M&L for PCC 1:3:6 type C2 (20mm graded aggregate) (75 mm thick as in plinth protection & finishing the surface even & fair W/o using extra cement complete all as specified and directed by Engr in Charge.

M&L for forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’. completed all as specified & directed by Engr-in-Charge.

S&F 150mm long aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and directed by Engr in Charge.

S&F 100mm mild steel butt hinges, medium weight, cold rolled and fixed complete all as specified and directed by Engr in Charge.

S&F 150mm long aluminium handles cast type, anodised and fitted complete all as specified and directed by Engr in Charge.

S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor overall length of cover plate 140mm complete all as specified and directed by Engr in Charge.

M&L aluminium extraded section of Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed by Engr in Charge.

M&L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite with 15mm thick screed bed or bedding layer in CM (1:6) complete and pointed in white or coloured cement to match the existing surface complete all as specified and directed by Engr in Charge.

S&F in repairs Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete all as specified and directed by Engr in Charge.

S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and directed by Engr in Charge.

S&F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed by Engr in Charge.

S&F in repairs PVC valveless, syphonic action type, flushing cistern 10 ltr capacity, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe complete all as specified and directed by Engr in Charge.

S&F Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed by Engr in Charge.

S&F Stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engr in Charge.

S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engr in Charge.

S&F health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed by Engr in Charge.

S&F in repairs Stainless steel plate rack wall mounted type with 5/6 partition of size 600mmx900mmx250mm made out of 1mm thick stainless steel sheet complete all as directed by Engr-in-Charge.

S&F in reapirs steel Grating doom 125 mm dia with waste hole complete all as specified and directed by Engr in Charge.

S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed by Engr in Charge.

S&F in repairs 15 mm Stop valves / angle valve fancy type, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr in Charge.

S&F in repairs Bib taps 15 mm, cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engr in Charge.

S&F Gun-metal, globe or gate valves 20 mm, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engr in Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr in Charge.

Dismantling of PVC pipes including fittings taking out of trenches or walls as requried dia of pipe uto 100mm. complete all as specified and directed by Engr in Charge.

S&F PVC (SWR) pipes single socketed in any length with rubber ring jointed fixed to wall for 110 mm bore complete all as specified and directed by Engr in Charge.

S&F PVC (SWR) pipes single socketed in any length with rubber ring jointed laid in trenches or in floor for 110mm bore complete all as specified and directed by Engr in Charge.

S&F PVC (SWR) pipes single socketed in any length with rubber ring jointed laid in trenches or in floor for 75mm bore

S&F PVC (SWR) bends any radius for 110mm bore with oval access door complete all as specified and directed by Engr in Charge.

S&F PVC (SWR) bends any radius for 75mm bore with oval access door complete all as specified and directed by Engr in Charge.

M&L for writing letters or figures (Block. Roman, Italic or Indian) n exc. 30 cm high complete all as specified and directed

M&L for cement concrete (1:4:8) type D2 (using 40mm graded crushed stone aggrete) as in foundation,fillings and mass concrete complete all as specified and directed by Engr in Charge.

M&L for surface excavation n exc 30cm deep and averaging 15 cm deep and getting out any type of soil complete all as specified and directed by Engr in Charge.

M&L for removing excavated material to a distence n exc 50m and depositing where directed at a level n exc 1.5m above the starting point, complete all as specified and directed by Engr in Charge.

M&L PCC 1:5:10 type E-2 (using 40mm graded aggregate) in foundation, filling and mass concrete complete all as specified and directed by Engr in Charge.

M&L for providing precast cement concrete 1:2:4 type B1 using 20mm graded aggregate solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) setting in mortar, complete, in walls complete all as specified and directed by Engr in Charge.

M&L for Cement concrete tiles 25cm x 25cm x 22mm thick, machine pressed with grey and pigment; set jointed and pointed in neat cement slurry over and included 15mm screed cement mortar (1:6) and pigment size conforming complete all as specified and directed by Engr in Charge.

EM PORTION Taking down carefully coppper /aluminium point wiring (light, fan,bell,socket,and power) complete including fixtures and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittngs etc. for taking in credit under schedule of credit and making good disturbed surfaces complete all as specified and directed by Engr in Charge.

Taking down carefully ceiling fan any sweep any size, removing blades & deposited to store, and refixng the same after completion of workcomplete all as specified and directed by Engr in Charge.

Taking down MCB DB of any size incl MCBs of any size/any make and disposal under schedule of credit and making good disturbed surfaces complete all as specified and directed by Engr in Charge.

M&L for Point wiring for One light point controlled by one switch 5 Amp SP one-way complete with 1.5 Sq mm (nominal area) PVC insulated, unsheathed and multi strand copper conductor FRLS cable (ISI marked) drawn into and including PVC concealed conduit (medium quality) and conduit fittings including 1.5 Sq mm PVC insulated unsheathed and multi stranded copper conductor FRLS cable as earth wire to common earth and connecting to earth dolly, MS modular sunken box of suitable size for fixing modular switches,sockets,regulators with frame, including modular cover plate (inner/outer) of size as per site requirement and machine made brass screw and washers etc complete all as specified and directed for one light point controlled by one one way switch complete all as specified and directed by Engr in Charge.

Description all as SI No 98 here in before but one call bell point controlled by one bell push point complete all as specified and directed by Engr in Charge.

Description all as SI No 98 here in before but for one ceiling fan/exhaust/wall fan point complete all as specified and directed by Engr in Charge.

Description all as SI No here in before but for one 3 pin 5 amp socket on same board complete all as specified and directed by Engr in Charge.

Description all as SI No 98 here in before but for one 3 pin 5 amp socket on indipendant board complete all as specified and directed by Engr in Charge.

Description all as SI No 98 here in before but with 2.5 sqmm copper conductor for 15 amp socket with 2.5 sqmm earth continuity conductor complete all as specified and directed by Engr in Charge.

S&F Modular switch SP one way 5/6 Amps suitable for 1 Module complete all as specified and directed by Engr in Charge.

S&F Modular Bell push ,SP 5/6 A suitable for 1 Module complete all as specified and directed by Engr in Charge.

S&F Modular socket 5 pin 5/6 Amps suitable for 2 Module complete all as specified and directed by Engr in Charge.

S&F Modular switch SP one way 16 Amps suitable for 1 Module complete all as specified

S&F Modular socket 5/6 pin 15/16 Amps suitable for 2 Module complete all as specified and directed by Engr in Charge.

S&F Modular fan regulator 120 watt 2 module complete all as specified and directed by Engr in Charge.

M&L for Point wiring for One light point controlled by one switch 5 Amp SP one-way complete with 1.5 Sq mm (nominal area) PVC insulated, unsheathed and multi strand copper conductor FRLS cable (ISI marked) drawn into and including PVC casing & caping and accessories including 1.5 Sq mm PVC insulated unsheathed and multi stranded copper conductor FRLS cable as earth wire to common earth and connecting to earth dolly, MS sunken box/PVC gang box as per site requirement of suitable size, laminated sheet cover for fixing switches,sockets,regulators etc. and brass machine screw and washers etc complete all as specified and directed for one light point/fan point controlled by one one way switch.

Description all as SI No 110 here in before but for one 3 pin 5 amp socket on same board complete all as specified and directed by Engr in Charge.

Description all as SI No 110 here in before but for one 3 pin 5 amp socket on indipendant board complete all as specified and directed by Engr in Charge.

Description all as SI No 110 here in before with 2.5 sqmm copper conductor for 15 amp socket with 2.5 sqmm earth continuity conductor

S&F switch piano, flush type single pole , one way 6 amp complete all as specified and directed by Engr in Charge.

S&F switch piano, flush type single pole , one way 16 amp complete all as specified and directed by Engr in Charge.

S&F socket outlet 2 in 1, 3 pin, 6 amp flush type complete all as specified and directed by Engr in Charge.

S&F socket outlet 2 in 1, 3 pin, 6 and 16 amp flush type complete all as specified and directed by Engr in Charge.

S&F steped type electronic fan regulator flush type complete all as specified and directed by Engr in Charge.

S&F ceiling rose surface backalite of suitable size three terminalscomplete all as specified and directed by Engr in Charge.

S&F Electric bell, AC, 230 volts single phase Ding Dong Type complete all as specified and directed by Engr in Charge.

Supply and fix lamp holder insulated body with back plate suitable for any type of fitting all complete all as specified and directed by Engr in Charge.

Supply and fix LED lamp 9 watt complete all as specified and directed by Engr in Charge.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed by Engr in Charge.

Supply and fixing LED lights fitting 1x 18W,Batten type complete all as specified and directed by Engr in Charge.

Supply and fixing LED light fitting 10W (2 feet long ) Batten type complete all as specified and directed by Engr in Charge.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed by Engr in Charge.

Supply and fix electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed by Engr in Charge.

Supply and fix exhaust fan, steel body heavy duty AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers all as specified and directed by Engineer- in-Charge.

Supply and fixing sheet metal enclosure for DB's , MCB DB SPN 8 way double door complete all as specified and directed by Engr in Charge.

Supply and fixing sheet metal enclosure for DB's , MCB DB SPN 12 way double door complete all as specified and directed by Engr in Charge.

Supply and fixing, in replacement of MCB SP 240 Volts 6 Amps to 32 Amps complete all as specified and directed by Engineer-in Charge.

Supply and fixing, in replacement of MCB SPN 240 Volts 32 Amps complete all as specified and directed by Engineer-in Charge.

Supply and fixing, in replacement of MCB SPN 240 Volts 63 Amps complete all as specified and directed by Engineer-in Charge.

Supply and fixing LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC incl taking down old recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

S&F Sub main wiring with PVC insulated, FRLS cable 2 single core 6 Sq mm 1100 V grade with stranded copper conductor on and incl PVC rigid non metalic conduit (ISI marked) in concealed incl all specials like joint, elbow , Tee ,junction , bend etc and provision of PVC insulated copper conductor single core 6 sq mm for earth continuityconductor complete all as directed by Enginer-in-charge.

Earthing complete with GI earth plate 60cm ×60cm ×3 mm thick electrode buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 meter below normal ground level connected to GI earth wire lead 4 mm dia by means of bolts, nuts, check nuts and washer of galvanized iron or steel all as shown in electrical plate No 5 of SSR Part-I connected to continuous earth wire on earthing point all as specified and testing on completion, including provision of GI earth lead wire protected by 15 mm dia GI light grade protection pipe from test point to main board and 20mm GI medium grade watering pipe funnel, PCC earth pit and RCC cover charcoal, salt and GI wire including excavation and earth work etc complete all as specified and directed by Engr in Charge.

M&L for taking down GI pipe of any size and length from wall and refxing the same for hanging of ceiling fan at height required at site above false ceiling and making good the disturbed surface complete all as specified and directed by Engr in Charge.

RAMAN KUMAR (BID ID -3378625)

R.K. Works (BID ID -3369189)

M/S GURU DEV BUILDERS (BID ID -3370092)

d d builders (BID ID -3370334)

Abrol Infrastructures (BID ID -3378895)